High-temperature thermoelectric properties of n-type BayNixCo4−xSb12

2001 ◽  
Vol 16 (12) ◽  
pp. 3343-3346 ◽  
Author(s):  
X. F. Tang ◽  
L. M. Zhang ◽  
R. Z. Yuan ◽  
L. D. Chen ◽  
T. Goto ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
High Temperature ◽  
Seebeck Coefficient ◽  
Thermoelectric Properties ◽  
Electron Concentration ◽  
Lattice Thermal Conductivity ◽  
Filling Fraction ◽  
Ni Content ◽  
Increasing Temperature

Effects of Ba filling fraction and Ni content on the thermoelectric properties of n-type BayNixCo4−xSb12 (x = 0−0.1, y = 0−0.4) were investigated at temperature range of 300 to 900 K. Thermal conductivity decreased with increasing Ba filling fraction and temperature. When y was fixed at 0.3, thermal conductivity decreased with increasing Ni content and reached a minimum value at about x = 0.05. Lattice thermal conductivity decreased with increasing Ni content, monotonously (y ≤ 0.1). Electron concentration and electrical conductivity increased with increasing Ba filling fraction and Ni content. Seebeck coefficient increased with increasing temperature and decreased with increasing Ba filling fraction and Ni content. The maximum ZT value of 1.25 was obtained at about 900 K for n-type Ba0.3Ni0.05Co3.95Sb12.

High-Temperature Thermoelectric Properties of Silicon Boride Ceramics as a Smart Material

1999 ◽  
Vol 604 ◽  
Author(s):  
Noriyuki Takashima ◽  
Yasuo Azuma ◽  
Jun-Ichi Matsushita
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
High Temperature ◽  
Seebeck Coefficient ◽  
Relative Density ◽  
Thermoelectric Properties ◽  
Room Temperature ◽  
Sintering Temperature ◽  
Smart Material ◽  
Increasing Temperature

AbstractSeveral silicon boride phases such as SiB4, SiB6, SiB6-x, SiB6+x, and Si11B31, were previously reported. Among them, SiB6has proved to be a potentially useful material because of its excellent electrical conductivity, high degree of hardness, moderate melting point, and low specific gravity. The sintering conditions and thermoelectric properties of silicon boride (SiB6) ceramics produced by hot pressing were investigated in order to determine the suitability of this material for high-temperature thermoelectric applications as a smart material. The relative density increased with increasing sintering temperature. With a sintering temperature of 1923 K, a sintered body having a relative density of more than 99% was obtained. X-ray diffraction analysis showed no crystalline phase other than SiB6 in the sintered body. The specimens were prepared for measurement of the electrical conductivity and Seebeck coefficient by the D.C. four-terminal method. The thermal conductivity of SiB6 was obtained by calculation from the thermal diffusivity and specific heat capacity of the specimen. The electrical conductivity of SiB6 increased with increasing temperature. The electrical conductivity of the polycrystalline SiB6 (99% dense) was 0.5 to 1.1 × 103 S/m at 298 to 1273 K. The thermal conductivity decreased with increasing temperature in the range of room temperature to 1273 K. The thermal conductivity was 9.1 to 2.5 W/mK in the range of room temperature to 1273 K. The Seebeck coefficient of SiB6 increased with increasing temperature. The Seebeck coefficient of SiB6 was 140 × 10−6 V/K at 1273 K. The figure of merit Z of SiB6 increased with increasing temperature. The Z of SiB6 reached 8.1 × 10−6/K at 1273 K. The ZT value is useful to evaluate the ability of thermoelectric materials. The ZT value reached 0.01 at 1273 K. Based on the results, SiB6 showed very good thermoelectric material characteristics at high temperature.

Band Structure and Thermoelectric Properties of Ni(x)Zn(1-x)Fe2O4

2021 ◽  
Vol 317 ◽  
pp. 28-34
Author(s):  
Joon Hoong Lim
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Band Structure ◽  
Seebeck Coefficient ◽  
Band Gap ◽  
Thermoelectric Properties ◽  
Xrd Analysis ◽  
Valence Band Maximum ◽  
Solid State Method ◽  
Ni Content

Thermoelectric materials has made a great potential in sustainable energy industries, which enable the energy conversion from heat to electricity. The band structure and thermoelectric properties of Ni(x)Zn(1-x)Fe2O4 have been investigated. The bulk pellets were prepared from analytical grade ZnO, NiO and Fe2O3 powder using solid-state method. It was possible to obtain high thermoelectric properties of Ni(x)Zn(1-x)Fe2O4 by controlling the ratios of dopants and the sintering temperature. XRD analysis showed that the fabricated samples have a single phase formation of cubic spinel structure. The thermoelectric properties of Ni(x)Zn(1-x)Fe2O4 pellets improved with increasing Ni. The electrical conductivity of Ni(x)Zn(1-x)Fe2O4 pellets decreased with increasing Ni content. The electrical conductivity of Ni(x)Zn(1-x)Fe2O4 (x = 0.0) is (0.515 x10-3 Scm-1). The band structure shows that ZnxCu1-xFe2O4 is an indirect band gap material with the valence band maximum (VBM) at M and conduction band minimum (CBM) at A. The band gap of Ni(x)Zn(1-x)Fe2O4 increased with increasing Ni content. The increasing band gap correlated with the lower electrical conductivity. The thermal conductivity of Ni(x)Zn(1-x)Fe2O4 pellets decreased with increasing Ni content. The presence of Ni served to decrease thermal conductivity by 8 Wm-1K-1 over pure samples. The magnitude of the Seebeck coefficient for Ni(x)Zn(1-x)Fe2O4 pellets increased with increasing amounts of Ni. The figure of merit for Ni(x)Zn(1-x)Fe2O4 pellets and thin films was improved by increasing Ni due to its high Seebeck coefficient and low thermal conductivity.

Effect of TiO2 additive on thermoelectric properties of SrTiO3

2019 ◽  
Vol 13 (02) ◽  
pp. 2051001
Author(s):  
Wei-Ying Yang ◽  
Ke-Xian Wang ◽  
Zheng Cao ◽  
Hao-Yang Yu ◽  
Xiao-Bo Ma ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
High Temperature ◽  
Seebeck Coefficient ◽  
Strontium Titanate ◽  
Thermoelectric Properties ◽  
Waste Heat ◽  
Molar Ratio ◽  
Composite Powders ◽  
The Impact

Strontium titanate ([Formula: see text] has the advantages of being non-toxic, environmentally friendly and high-temperature stable, and has potential application in waste heat power generation at medium and high temperature. To explore the impact of TiO2 on the thermoelectric properties of SrTiO3, we synthesized TiO2/La10Nbb10-STO composite powders by hydrothermal method using precursor solution of 10[Formula: see text]mol.% La and 10[Formula: see text]mol.% Nb co-doped STO (La10Nb10-STO) containing TiO2 nanopowders with different molar ratio. After cold pressing and sintering, composite bulk materials were obtained, and their microstructure and thermoelectric transport properties were analyzed. With the increasing TiO2, although the thermal conductivity of TiO2/La10Nb10-STO composite decreased and the Seebeck coefficient increased, the minimum thermal conductivity and the maximum Seebeck coefficient were 2.54[Formula: see text][Formula: see text][Formula: see text] and 215[Formula: see text][Formula: see text]V[Formula: see text][Formula: see text], respectively, at 1000[Formula: see text]K, but the power factor decreased at high temperature due to the apparent decrease of electrical conductivity, resulting in the ZT values being lower than that of La0Nb10-STO without TiO2 addition at high temperature. Significantly, the addition of TiO2 can improve the thermoelectric performance of strontium titanate at low temperature. This approach is expected to improve the ZT of SrTiO3-based thermoelectric material through additional controlling of electrical conductivity.

THERMOELECTRIC PROPERTIES OF p-TYPE SKUTTERUDITES (Pr0.25Nd0.75)xFe3CoSb12 BY LEVITATION MELTING AND SPARK PLASMA SINTERING

2013 ◽  
Vol 06 (05) ◽  
pp. 1340006 ◽  
Author(s):  
JINGSHU XU ◽  
CHENGUANG FU ◽  
JIAN XIE ◽  
XINBING ZHAO ◽  
TIEJUN ZHU
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Spark Plasma Sintering ◽  
Thermoelectric Properties ◽  
Lattice Thermal Conductivity ◽  
Levitation Melting ◽  
Plasma Sintering ◽  
Spark Plasma ◽  
P Type

The p-type skutterudite compounds of ( Pr 0.25 Nd 0.75)x Fe 3 CoSb 12 (x = 0.67–0.78) have been successfully synthesized by levitation melting followed by annealing and spark plasma sintering. The thermoelectric properties have been characterized by the measurements of Seebeck coefficient, electrical conductivity and thermal conductivity in the temperature range from 300 K to 850 K. The improvement in the thermoelectric properties was realized due to the reduction in the lattice thermal conductivity when the voids were partially filled by Pr 0.25 Nd 0.75. The maximum ZT value of ~ 0.83 for ( Pr 0.25 Nd 0.75)0.76 Fe 3 CoSb 12 was obtained at 700 K.

Thermoelectric properties of In-filled and Te-doped CoSb3 prepared by high-pressure and high-temperature

2015 ◽  
Vol 29 (19) ◽  
pp. 1550095 ◽  
Author(s):  
Le Deng ◽  
Li Bin Wang ◽  
Jie Ming Qin ◽  
Tao Zheng ◽  
Jing Ni ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
High Pressure ◽  
High Temperature ◽  
Seebeck Coefficient ◽  
Thermoelectric Properties ◽  
Temperature Dependent ◽  
Synthesis Time ◽  
Temperature Range

A novel chemical alloying method of high-pressure and high-temperature (HPHT) has been used for the synthesis of bulk-skutterudite [Formula: see text]. Through HPHT method, the synthesis time has been shortened from a few days to 30[Formula: see text]min. The samples of [Formula: see text] skutterudites were synthesized at 1.8–3.3[Formula: see text]GPa. We have studied the phase, the microstructure, and the temperature-dependent thermoelectric properties. The Seebeck coefficient, electrical conductivity and thermal conductivity were measured in the temperature range of 295–673[Formula: see text]K. As we expected, the thermal conductivity of sample [Formula: see text] decreased with the increase of the synthetic pressure. A maximal ZT of 0.64 was achieved for the [Formula: see text] synthesized at 1.8[Formula: see text]GPa at 673[Formula: see text]K. These results revealed that HPHT method may be helpful for optimizing electrical conductivity and thermal conductivity in a comparatively independent way.

Investigation of Thermoelectric Materials: Substitution effect of Bi on the Ag1-xPb18MTe20 (M = Sb, Bi) (x = 0, 0.14, 0.3)

2007 ◽  
Vol 1044 ◽  
Author(s):  
Mi-kyung Han ◽  
Huijun Kong ◽  
Ctirad Uher ◽  
Mercouri G Kanatzidis
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Thermoelectric Materials ◽  
Figure Of Merit ◽  
Lattice Thermal Conductivity ◽  
Substitution Effect ◽  
Dimensionless Figure Of Merit ◽  
The Matrix ◽  
Mass Fluctuation

AbstractWe performed comparative investigations of the Ag1-xPb18MTe20 (M = Bi, Sb) (x = 0, 0.14, 0.3) system to better understand the roles of Sb and Bi on the thermoelectric properties. In both systems, the electrical conductivity nearly keeps the same values, while the Seebeck coefficient decreases dramatically in going from Sb to Bi. Compared to the lattice thermal conductivity of PbTe, that of AgPb18BiTe20 is substantially reduced. The lattice thermal conductivity of the Bi analog, however, is higher than that of AgPb18SbTe20 and this is attributed largely to the decrease in the degree of mass fluctuation between the nanostructures and the matrix (for the Bi analog). As a result the dimensionless figure of merit ZT of Ag1-xPb18MTe20 (M = Bi) is found to be smaller than that of Ag1-xPb18MTe20 (M = Sb).

Effects of Ce filling fraction and Fe content on the thermoelectric properties of Co-rich CeyFexCo4−xSb12

2001 ◽  
Vol 16 (3) ◽  
pp. 837-843 ◽  
Author(s):  
Xinfeng Tang ◽  
Lidong Chen ◽  
Takashi Goto ◽  
Toshio Hirai
Keyword(s):  
Thermal Conductivity ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Single Phase ◽  
Lattice Thermal Conductivity ◽  
Hole Concentration ◽  
Thermoelectric Figure Of Merit ◽  
Thermoelectric Figure ◽  
Filling Fraction ◽  
Fe Content

Single-phase filled skutterudite compounds, CeyFexCo4−xSb12 (x = 0 to 3.0, y = 0 to 0.74), were synthesized by a melting method. The effects of Fe content and Ce filling fraction on the thermoelectric properties of CeyFexCo4−xSb12 were investigated. The lattice thermal conductivity of Ce-saturated CeyFexCo4−xSb12, y being at the maximum corresponding to x, decreased with increasing Fe content (x) and reached its minimum at about x = 1.5. When x was 1.5, lattice thermal conductivity decreased with increasing Ce filling fraction till y = 0.3 and then began to increase after reaching the minimum at y = 0.3. Hole concentration and electrical conductivity of Cey Fe1.5Co2.5Sb12 decreased with increasing Ce filling fraction. The Seebeck coefficient increased with increasing Ce filling fraction. The greatest dimensionless thermoelectric figure of merit T value of 1.1 was obtained at 750 K for the composition of Ce0.28Fe1.52Co2.48Sb12.

scholarly journals Effect of band structure adjustment based of Cu site on the thermoelectric properties of BiCuSeO

2021 ◽  
Author(s):  
Bo Feng
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Effective Mass ◽  
Valence Band ◽  
Thermoelectric Properties ◽  
Density Of States ◽  
First Principles Calculation ◽  
Temperature Range ◽  
Ti Doping

Abstract The effect of Ti doped at Cu site on the thermoelectric properties of BiCuSeO was studied by experimental method and first principles calculation. The results show that Ti doping can cause the lattice contraction and decrease the lattice constant. Ti doping can increase the band gap and lengthen the Cu/Ti-Se bond, resulting in the decrease of carrier concentration. Ti doping can reduce the effective mass and the Bi-Se bond length, correspondingly improve the carrier mobility. Ti doping can decrease the density of states of Cu-3d and Se-4p orbitals at the top of valence band, but Ti-4p orbitals can obviously increase the density of states at the top of valence band and finally increase the electrical conductivity in the whole temperature range. With the decrease of effective mass, Ti doping would reduce the Seebeck coefficient, but the gain effect caused by the increase of electrical conductivity is more than the benefit reduction effect caused by the decrease of Seebeck coefficient, and the power factor shows an upward trend. Ti doping can reduce Young's modulus, lead to the increase of defect scattering and strain field, correspondingly reduce the lattice thermal conductivity and total thermal conductivity. It is greatly increased for the ZT values in the middle and high temperature range, with the highest value of 1.04 at 873 K.

Thermoelectric Properties of n-type (Bi2Se3)x(Bi2Te3)1-x Crystals Prepared by Zone Melting

2008 ◽  
Vol 368-372 ◽  
pp. 547-549
Author(s):  
Jun Jiang ◽  
Ya Li Li ◽  
Gao Jie Xu ◽  
Ping Cui ◽  
Li Dong Chen
Keyword(s):  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Carrier Concentration ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Zone Melting ◽  
Chemical Compositions ◽  
Melting Method ◽  
Temperature Range

In the present study, n-type (Bi2Se3)x(Bi2Te3)1-x crystals with various chemical compositions were fabricated by the zone melting method. Thermoelectric properties, including Seebeck coefficient (α), electrical conductivity (σ) and thermal conductivity (κ), were measured in the temperature range of 300-500 K. The influence of the variations of Bi2Te3 and Bi2Se3 content on thermoelectric properties was studied. The increase of Bi2Se3 content (x) caused an increase in carrier concentration and thus an increase of σ and a decrease of α. The maximum figure of merit (ZT = α2σT/κ) of 0.87 was obtained at about 325 K for the composition of 93%Bi2Te3-7%Bi2Se3 with doping TeI4.

scholarly journals Effect of Grain Size and Film Thickness on the Thermoelectric Properties of Flexible Sb2Te3 Thin Films

2019 ◽  
Vol 2019 ◽  
pp. 1-7 ◽  
Author(s):  
Pornsiri Wanarattikan ◽  
Piya Jitthammapirom ◽  
Rachsak Sakdanuphab ◽  
Aparporn Sakulkalavek
Keyword(s):  
Thin Films ◽  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Grain Size ◽  
Film Thickness ◽  
Seebeck Coefficient ◽  
Thermoelectric Properties ◽  
Flexible Substrate ◽  
Rf Magnetron Sputtering ◽  
Mean Free Path

In this work, stoichiometric Sb2Te3 thin films with various thicknesses were deposited on a flexible substrate using RF magnetron sputtering. The grain size and thickness effects on the thermoelectric properties, such as the Seebeck coefficient (S), electrical conductivity (σ), power factor (PF), and thermal conductivity (k), were investigated. The results show that the grain size was directly related to film thickness. As the film thickness increased, the grain size also increased. The Seebeck coefficient and electrical conductivity corresponded to the grain size of the films. The mean free path of carriers increases as the grain size increases, resulting in a decrease in the Seebeck coefficient and increase in electrical conductivity. Electrical conductivity strongly affects the temperature dependence of PF which results in the highest value of 7.5 × 10−4 W/m·K2 at 250°C for film thickness thicker than 1 µm. In the thermal conductivity mechanism, film thickness affects the dominance of phonons or carriers. For film thicknesses less than 1 µm, the behaviour of the phonons is dominant, while both are dominant for film thicknesses greater than 1 µm. Control of the grain size and film thickness is thus critical for controlling the performance of Sb2Te3 thin films.

Sign in / Sign up

Export Citation Format

Share Document