scholarly journals Antibacterial Properties of Triethoxysilylpropyl Succinic Anhydride Silane (TESPSA) on Titanium Dental Implants

Polymers ◽  
2020 ◽  
Vol 12 (4) ◽  
pp. 773
Author(s):  
Judit Buxadera-Palomero ◽  
Maria Godoy-Gallardo ◽  
Meritxell Molmeneu ◽  
Miquel Punset ◽  
Francisco Javier Gil
Keyword(s):  
Dental Implants ◽  
Photoelectron Spectroscopy ◽  
Succinic Anhydride ◽  
Human Fibroblasts ◽  
Antibacterial Properties ◽  
Antimicrobial Properties ◽  
Sodium Titanate ◽  
Adhesion Assay ◽  
Vitro Effect

Infections related to dental implants are a common complication that can ultimately lead to implant failure, and thereby carries significant health and economic costs. In order to ward off these infections, this paper explores the immobilization of triethoxysilylpropyl succinic anhydride (TESPSA, TSP) silane onto dental implants, and the interaction of two distinct monospecies biofilms and an oral plaque with the coated titanium samples. To this end, titanium disks from prior machining were first activated by a NaOH treatment and further functionalized with TESPSA silane. A porous sodium titanate surface was observed by scanning electron microscopy and X-ray photoelectron spectroscopy analyses confirmed the presence of TESPSA on the titanium samples (8.4% for Ti–N-TSP). Furthermore, a lactate dehydrogenase assay concluded that TESPSA did not have a negative effect on the viability of human fibroblasts. Importantly, the in vitro effect of modified surfaces against Streptococcus sanguinis, Lactobacillus salivarius and oral plaque were studied using a viable bacterial adhesion assay. A significant reduction was achieved in all cases but, as expected, with different effectiveness against simple mono-species biofilm (ratio dead/live of 0.4) and complete oral biofilm (ratio dead/live of 0.6). Nevertheless, this approach holds a great potential to provide dental implants with antimicrobial properties.

scholarly journals In Vitro Effect of Replicated Porous Polymeric Nano-MicroStructured Biointerfaces Characteristics on Macrophages Behavior

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1913
Author(s):  
Luminita Nicoleta Dumitrescu ◽  
Madalina Icriverzi ◽  
Anca Bonciu ◽  
Anca Roșeanu ◽  
Antoniu Moldovan ◽  
...  
Keyword(s):  
Inflammatory Response ◽  
Photoelectron Spectroscopy ◽  
Polyvinylidene Fluoride ◽  
Surface Characteristics ◽  
Sem Analysis ◽  
Chemical Structures ◽  
Microstructured Surface ◽  
Inflammatory Conditions ◽  
Vitro Effect

In the last decades, optimizing implant properties in terms of materials and biointerface characteristics represents one of the main quests in biomedical research. Modifying and engineering polyvinylidene fluoride (PVDF) as scaffolds becomes more and more attractive to multiples areas of bio-applications (e.g., bone or cochlear implants). Nevertheless, the acceptance of an implant is affected by its inflammatory potency caused by surface-induced modification. Therefore, in this work, three types of nano-micro squared wells like PVDF structures (i.e., reversed pyramidal shape with depths from 0.8 to 2.5 microns) were obtained by replication, and the influence of their characteristics on the inflammatory response of human macrophages was investigated in vitro. FTIR and X-ray photoelectron spectroscopy analysis confirmed the maintaining chemical structures of the replicated surfaces, while the topographical surface characteristics were evaluated by AFM and SEM analysis. Contact angle and surface energy analysis indicated a modification from superhydrophobicity of casted materials to moderate hydrophobicity based on the structure’s depth change. The effects induced by PVDF casted and micron-sized reversed pyramidal replicas on macrophages behavior were evaluated in normal and inflammatory conditions (lipopolysaccharide treatment) using colorimetric, microscopy, and ELISA methods. Our results demonstrate that the depth of the microstructured surface affects the activity of macrophages and that the modification of topography could influence both the hydrophobicity of the surface and the inflammatory response.

scholarly journals Lactoferrin/Calcium Phosphate-Modified Porous Ti by Biomimetic Mineralization: Effective Infection Prevention and Excellent Osteoinduction

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 992
Author(s):  
Song Chen ◽  
Yuanli He ◽  
Linna Zhong ◽  
Wenjia Xie ◽  
Yiyuan Xue ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Photoelectron Spectroscopy ◽  
Antibacterial Properties ◽  
Biomimetic Mineralization ◽  
Matrix Mineralization ◽  
X Ray ◽  
Porous Ti ◽  
Potential Applications ◽  
Modification Of Titanium

The surface modification of titanium (Ti) can enhance the osseointegration and antibacterial properties of implants. In this study, we modified porous Ti discs with calcium phosphate (CaP) and different concentrations of Lactoferrin (LF) by biomimetic mineralization and examined their antibacterial effects and osteogenic bioactivity. Firstly, scanning electron microscopy (SEM), the fluorescent tracing method, X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and the releasing kinetics of LF were utilized to characterize the modified Ti surface. Then, the antibacterial properties against S. sanguis and S. aureus were investigated. Finally, in vitro cytological examination was performed, including evaluations of cell adhesion, cell differentiation, extracellular matrix mineralization, and cytotoxicity. The results showed that the porous Ti discs were successfully modified with CaP and LF, and that the LF-M group (200 μg/mL LF in simulated body fluid) could mildly release LF under control. Further, the LF-M group could effectively inhibit the adhesion and proliferation of S. sanguis and S. aureus and enhance the osteogenic differentiation in vitro with a good biocompatibility. Consequently, LF-M-modified Ti may have potential applications in the field of dental implants to promote osseointegration and prevent the occurrence of peri-implantitis.

scholarly journals Evaluating the Antimicrobial Activity of Commercially Available Herbal Toothpastes on Microorganisms Associated with Diabetes Mellitus

2013 ◽  
Vol 14 (5) ◽  
pp. 924-929 ◽  
Author(s):  
Reena Kulshrestha ◽  
J Kranthi ◽  
P Krishna Rao ◽  
Feroz Jenner ◽  
V Abdul Jaleel ◽  
...  
Keyword(s):  
Diabetes Mellitus ◽  
Antimicrobial Activity ◽  
Dental Health ◽  
Antibacterial Properties ◽  
Antimicrobial Properties ◽  
Test Organism ◽  
Diffusion Method ◽  
Zone Of Inhibition ◽  
Disk Diffusion Method

ABSTRACT Aim The present study was conducted to evaluate the efficacy of commercially available herbal toothpastes against the different periodontopathogens. Materials and methods Six herbal toothpastes that were commonly commercially available were included in the study. Colgate herbal, Babool, Meswak, Neem active, Dabur red toothpastes were tested for the study whereas sterile normal saline was used as control. Antimicrobial efficacies of dentifrices were evaluated against Streptococcus mutans and Actinobacillus actinomycetemcomitans. The antimicrobial properties of dentifrices were tested by measuring the maximum zone of inhibition at 24 hours on the Mueller Hinton Agar media inoculated with microbial strain using disk diffusion method. Each dentifrice was tested at 100% concentration (full strength). Results The study showed that all dentifrices selected for the study were effective against the entire test organism but to varying degree. Neem active tooth paste gave a reading of 25.4 mm as the zone of inhibition which was highest amongst all of the test dentifrices. Colgate Herbal and Meswak dentifrices recorded a larger maximum zone of inhibition, measuring 23 and 22.6 mm respectively, compared to other toothpastes. All other dentifrices showed the zone of inhibition to be between 17 and 19 mm respectively. Conclusion The antibacterial properties of six dentifrices were studied in vitro and concluded that almost all of the dentifrices available commercially had antibacterial properties to some extent to benefit dental health or antiplaque action. How to cite this article Jenner F, Jaleel VA, Kulshrestha R, Maheswar G, Rao PK, Kranthi J. Evaluating the Antimicrobial Activity of Commercially Available Herbal Toothpastes on Microorganisms Associated with Diabetes Mellitus. J Contemp Dent Pract 2013;14(5):924-929.

scholarly journals Silicon Nitride (Si3N4) Implants: The Future of Dental Implantology?

2017 ◽  
Vol 43 (3) ◽  
pp. 240-244 ◽  
Author(s):  
Zahi Badran ◽  
Xavier Struillou ◽  
Francis J Hughes ◽  
Assem Soueidan ◽  
Alain Hoornaert ◽  
...  
Keyword(s):  
Silicon Nitride ◽  
Dental Implants ◽  
Dental Implant ◽  
Clinical Success ◽  
Treatment Options ◽  
Antibacterial Properties ◽  
Antimicrobial Properties ◽  
Future Research ◽  
Success Rates ◽  
Biological Performance

For decades titanium has been the preferred material for dental implant fabrication, with mechanical and biological performance resulting in high clinical success rates. These have been further enhanced by incremental development of surface modifications aimed at improving speed and degree of osseointegration and resulting in enhanced clinical treatment options and outcomes. However, increasing demand for metal-free dental restorations has also led to the development of ceramic-based dental implants, such as zirconia. In orthopedics, alternative biomaterials, such as polyetheretherketone or silicon nitride, have been used for implant applications. The latter is potentially of particular interest for oral use as it has been shown to have antibacterial properties. In this article we aim to shed light on this particular biomaterial as a future promising candidate for dental implantology applications, addressing basic specifications required for any dental implant material. In view of available preclinical data, silicon nitride seems to have the essential characteristics to be a candidate for dental implants material. This novel ceramic has a surface with potentially antimicrobial properties, and if this is confirmed in future research, it could be of great interest for oral use.

Antifungal effect of anthraquinones against Cryptococcus neoformans: detection of synergism with amphotericin B

2020 ◽  
Author(s):  
Raimunda Sâmia Nogueira Brilhante ◽  
Géssica dos Santos Araújo ◽  
Xhaulla Maria Quariguasi Cunha Fonseca ◽  
Glaucia Morgana de Melo Guedes ◽  
Lara de Aguiar ◽  
...  
Keyword(s):  
Antifungal Activity ◽  
Cryptococcus Neoformans ◽  
Amphotericin B ◽  
Antimicrobial Properties ◽  
Pharmacological Interaction ◽  
Minimum Inhibitory Concentrations ◽  
Broth Microdilution Method ◽  
Aloe Emodin ◽  
Vitro Effect

Abstract The emergence of tolerant Cryptococcus neoformans strains to antifungals has been described. It has directed researchers to screen for new antimicrobial compounds. In this context, several plant-derived compounds, such as anthraquinones (aloe emodin, barbaloin, and chrysophanol), have been investigated for their antimicrobial properties. This study aimed to evaluate the in vitro effect of aloe emodin, barbaloin and chrysophanol on C. neoformans in vitro growth. In addition, the interaction between these anthraquinones and amphotericin B and itraconazole was evaluated. Initially, the minimum inhibitory concentrations (MIC) of these compounds were determined against 17 strains of C. neoformans by the broth microdilution method and then pharmacological interaction assays were performed with 15 strains by the checkerboard method. Aloe emodin, barbaloin, and chrysophanol showed minimum inhibitory concentrations of 236.82–473.65 μM (64–128 μg/mL), 153–306 μM (64–128 μg/ml) and ≥1007 μM (≥256 μg/ml), respectively. Furthermore, aloe emodin (11/15), barbaloin (13/15), and chrysophanol (12/15) showed pharmacological synergism (FICI < 0.5) with amphotericin B at subinhibitory concentrations (MIC/4). The itraconazole-aloe emodin interaction was additive (1/15) (0.5 < FICI < 1.0). The itraconazole-barbaloin interaction were synergistic (2/15) and additive (5/15); whereas itraconazole-chrysophanol interactions were additive (2/15). Anthraquinones, especially aloe emodin and barbaloin, present in vitro antifungal activity against C. neoformans and potentiate the antifungal activity of amphotericin B.

scholarly journals Sustained Release from Injectable Composite Gels Loaded with Silver Nanowires Designed to Combat Bacterial Resistance in Bone Regeneration Applications

Pharmaceutics ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 116 ◽  
Author(s):  
Arianna De Mori ◽  
Meena Hafidh ◽  
Natalia Mele ◽  
Rahmi Yusuf ◽  
Guido Cerri ◽  
...  
Keyword(s):  
Bacterial Resistance ◽  
Composite Scaffold ◽  
Silver Nanowires ◽  
Gelation Time ◽  
Antibacterial Properties ◽  
Antimicrobial Properties ◽  
Bone Tissue Regeneration ◽  
Composite Gels ◽  
Prevention Of Infections

One-dimensional nanostructures, such as silver nanowires (AgNWs), have attracted considerable attention owing to their outstanding electrical, thermal and antimicrobial properties. However, their application in the prevention of infections linked to bone tissue regeneration intervention has not yet been explored. Here we report on the development of an innovative scaffold prepared from chitosan, composite hydroxyapatite and AgNWs (CS-HACS-AgNWs) having both bioactive and antibacterial properties. In vitro results highlighted the antibacterial potential of AgNWs against both gram-positive and gram-negative bacteria. The CS-HACS-AgNWs composite scaffold demonstrated suitable Ca/P deposition, improved gel strength, reduced gelation time, and sustained Ag+ release within therapeutic concentrations. Antibacterial studies showed that the composite formulation was capable of inhibiting bacterial growth in suspension, and able to completely prevent biofilm formation on the scaffold in the presence of resistant strains. The hydrogels were also shown to be biocompatible, allowing cell proliferation. In summary, the developed CS-HACS-AgNWs composite hydrogels demonstrated significant potential as a scaffold material to be employed in bone regenerative medicine, as they present enhanced mechanical strength combined with the ability to allow calcium salts deposition, while efficiently decreasing the risk of infections. The results presented justify further investigations into the potential clinical applications of these materials.

Cu–Co Co-Doped Microporous Coating on Titanium with Osteogenic and Antibacterial Properties

2021 ◽  
Vol 17 (7) ◽  
pp. 1435-1447
Author(s):  
Quan-Ming Zhao ◽  
Bo Li ◽  
Fu-Xun Yu ◽  
Yan-Kun Li ◽  
Jie-Shi Wu ◽  
...  
Keyword(s):  
Clinical Performance ◽  
Antibacterial Properties ◽  
Microarc Oxidation ◽  
Antimicrobial Properties ◽  
Antibacterial Activities ◽  
Bone Surgery ◽  
Co Doping ◽  
Proliferation And Differentiation ◽  
Co Doped

Titanium (Ti) and its alloys are widely used in bone surgery by virtue of their excellent mechanical properties and good biocompatibility; however, complications such as loosening and sinking have been reported post-implantation. Herein we deposited a copper–cobalt (Cu–Co) co-doped titanium dioxide (TUO) coating on the surface of Ti implants by microarc oxidation. The osteogenic and antimicrobial properties of the coating were evaluated by in vitro experiments, and we also assessed β-catenin expression levels on different sample surfaces. Our results revealed that the coating promoted the adhesion, proliferation, and differentiation of MG63 osteoblasts, and TUO coating promoted β-catenin expression; moreover, the proliferation of Staphylococcus aureus was inhibited. To summarize, we report that Cu–Co co-doping can enhance the osteogenic and antibacterial activities of orthopedic Ti implants, leading to potentially improved clinical performance.

scholarly journals SYNTHESIS, CHARACTERIZATION AND IN VITRO ANTIMICROBIAL EVALUATION OF SOME NOVEL BENZIMIDAZOLE DERIVATIVES BEARING HYDRAZONE MOIETY

2017 ◽  
Vol 10 (16) ◽  
pp. 1
Author(s):  
Jayanta Sarma ◽  
Gurvinder Singh ◽  
Mukta Gupta ◽  
Reena Gupta ◽  
Bhupinder Kapoor
Keyword(s):  
Antibacterial Properties ◽  
Antimicrobial Properties ◽  
Aromatic Aldehydes ◽  
Antibacterial Activities ◽  
Antimicrobial Activities ◽  
Benzimidazole Derivatives ◽  
E Coli ◽  
Antimicrobial Evaluation ◽  
Antibacterial Potential

Objective: The synthesis of novel benzimidazole-hydrazone derivatives has been carried out based on the previous findings that both these pharmacophores possess potent antimicrobial activities. The antibacterial properties of synthesized derivatives were screened against both Gram-positive and Gram-negative bacteria.Methods: O-phenylenediamine on condensation with substituted aromatic acids in polyphosphoric acid gave benzimidazole nucleus which on reaction with ethyl chloroacetate and hydrazine hydrate in two different steps resulted in the formation of substituted acetohydrazides. The targeted compounds 6a-l were synthesized by reaction of substituted acetohydrazides with aromatic aldehydes and screened for their antibacterial potential by cup-plate method.Results: The synthesized benzimidazole-hydrazones exhibited moderate to strong antibacterial activities against Staphylococcus aureus, Bacillus subtilis, Escherichia coli, and Pseudomonas aeruginosa. The compounds 6a-6f were found to be most effective against S. aureus, E. coli, and P. aeruginosa. Among all the synthesized compounds, the zone of inhibition of 6f in highest concentration, i.e., 100 μg/ml were found to be >31 mm against all the stains of bacteria.Conclusion: The antibacterial results revealed that the synthetized derivatives have significant antimicrobial properties and further structure activity relationship studies may develop more potent and less toxic molecules.

Sign in / Sign up

Export Citation Format

Share Document