scholarly journals Effect of Fabric Architecture on Tensile Behaviour of the High-Molecular-Weight Polyethylene 3-Dimensional Interlock Composite Reinforcements

Polymers ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 1045 ◽  
Author(s):  
Mengru Li ◽  
Peng Wang ◽  
François Boussu ◽  
Damien Soulat
Keyword(s):  
Tensile Properties ◽  
Optimal Solution ◽  
Tensile Tests ◽  
Influential Factors ◽  
Uniaxial Tensile ◽  
Tensile Behaviour ◽  
Warp Yarn ◽  
Main Category ◽  
3 Dimensional ◽  
Mechanical Performances

As promising fibrous reinforcements in the thick composites manufacturing, 3-dimensional warp interlock fabrics (3DWIFs) are recognised more and more in the industry for their outstanding mechanical properties compared to the 2D laminates. The present work shows the influence of the fabric’s architecture on the tensile behaviour of 3DWIFs. Five kinds of 3D fabrics with different interlock structures have been designed according to the main category of binding warp yarn evolution. These five 3DWIFs, containing both binding and stuffer warp yarns and produced with the same warp and weft densities, are experimentally tested via uniaxial tensile tests. The experimental results of the different 3DWIFs have been compared to find the optimal solution based on several mechanical performances. Fabric structures have an impact on tensile properties both in the warp and weft directions. Furthermore, other influential factors, for example, the yarn crimps during the weaving process and the crimp angles of binding warp yarns in 3DWIFs, are investigated and discussed in the paper. The influence of the total crimp angles related to the binding path on the tensile properties of 3DWIFs via the inter yarns friction is summarised.

scholarly journals Filling of Mater-Bi with Nanoclays to Enhance the Biofilm Rigidity

2018 ◽  
Vol 9 (4) ◽  
pp. 60 ◽  
Author(s):  
Giuseppe Cavallaro ◽  
Giuseppe Lazzara ◽  
Lorenzo Lisuzzo ◽  
Stefana Milioto ◽  
Filippo Parisi
Keyword(s):  
Tensile Properties ◽  
Food Packaging ◽  
Mechanical Response ◽  
Materials Science ◽  
Traction Force ◽  
Tensile Tests ◽  
Mechanical Analysis ◽  
Nanocomposite Films ◽  
Preliminary Study ◽  
Mechanical Performances

We investigated the efficacy of several nanoclays (halloysite, sepiolite and laponite) as nanofillers for Mater-Bi, which is a commercial bioplastic extensively used within food packaging applications. The preparation of Mater-Bi/nanoclay nanocomposite films was easily achieved by means of the solvent casting method from dichloroethane. The prepared bio-nanocomposites were characterized by dynamic mechanical analysis (DMA) in order to explore the effect of the addition of the nanoclays on the mechanical behavior of the Mater-Bi-based films. Tensile tests found that filling Mater-Bi with halloysite induced the most significant improvement of the mechanical performances under traction force, while DMA measurements under the oscillatory regime showed that the polymer glass transition was not affected by the addition of the nanoclay. The tensile properties of the Mater-Bi/halloysite nanotube (HNT) films were competitive compared to those of traditional petroleum plastics in terms of the elastic modulus and stress at the breaking point. Both the mechanical response to the temperature and the tensile properties make the bio-nanocomposites appropriate for food packaging and smart coating purposes. Here, we report a preliminary study of the development of sustainable hybrid materials that could be employed in numerous industrial and technological applications within materials science and pharmaceutics.

The tensile behaviour of biaxial and triaxial braided fabrics

2016 ◽  
Vol 47 (8) ◽  
pp. 2184-2204 ◽  
Author(s):  
Duchamp Boris ◽  
Legrand Xavier ◽  
Soulat Damien
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Mechanical Behaviour ◽  
Tensile Tests ◽  
Uniaxial Tensile ◽  
Tensile Behaviour ◽  
Linear Mass ◽  
Double Peak ◽  
Specific Behaviour ◽  
Braiding Angle

The tensile behaviour of braid reinforcement is classically described by the behaviour of composite elaborated from these reinforcements. Few studies concern the tensile behaviour of braided fabrics. In this paper biaxial and triaxial braids are manufactured on a braiding loom. The evolution of key parameters as linear mass and braiding angle in function of process parameters is presented. Braid reinforcements are characterized in uniaxial tensile. The mechanical behaviour is analysed and compared in function of the braiding angle, but also different kinds of braid are considered. A specific behaviour called “double-peak” is identified for triaxial braids which have a higher braiding angle. The evolution of the braiding angle measured during tensile tests gives a comprehension on the mechanical behaviour of dry braids. Associated with this experimental study, an analytical model is also proposed, to predict mechanical properties of braid reinforcements.

scholarly journals Cervical Rotatory Manipulation Decreases Uniaxial Tensile Properties of Rabbit Atherosclerotic Internal Carotid Artery

2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Shaoqun Zhang ◽  
Ji Qi ◽  
Lei Zhang ◽  
Chao Chen ◽  
Shubhro Mondal ◽  
...  
Keyword(s):  
Elastic Modulus ◽  
Carotid Artery ◽  
Internal Carotid Artery ◽  
Tensile Properties ◽  
Internal Carotid ◽  
Tensile Tests ◽  
Normal Group ◽  
Uniaxial Tensile ◽  
Model Group ◽  
Main Effects

Objective. To investigate the effects of one of the Chinese massage therapies, cervical rotatory manipulation (CRM), on uniaxial tensile properties of rabbit atherosclerotic internal carotid artery (ICA).Methods. 40 male purebred New Zealand white rabbits were randomly divided into CRM-Model group, Non-CRM-Model group, CRM-Normal group, and Non-CRM-Normal group. After modeling (atherosclerotic model) and intervention (CRM or Non-CRM), uniaxial tensile tests were performed on the ICAs to assess the differences in tensile mechanical properties between the four groups.Results. Both CRM and modeling were the main effects affecting physiological elastic modulus (PEM) of ICA. PEM in CRM-Model group was 1.81 times as much as Non-CRM-Model group, while the value in CRM-Model group was 1.34 times as much as CRM-Normal group. Maximum elastic modulus in CRM-Model group was 1.80 times as much as CRM-Normal group. Max strains in CRM-Model group and Non-CRM-Model group were 30.98% and 28.71% lower than CRM-Normal group and Non-CRM-Normal group, respectively. However, whether treated with CRM or not, the uniaxial tensile properties of healthy ICAs were not statistically different.Conclusion. CRM may decrease the uniaxial tensile properties of rabbit arteriosclerotic ICA, but with no effect on normal group. The study will aid in the meaningful explanation of the controversy about the harmfulness of CRM and the suitable population of CRM.

scholarly journals Quantifying Tensile Properties of Bamboo Silicone Biocomposite using Yeoh Model

2018 ◽  
Vol 7 (4.26) ◽  
pp. 245 ◽  
Author(s):  
Kamarul Nizam Hassan ◽  
Jamaluddin Mahmud ◽  
Anwar P.P. Abdul Majeed ◽  
Mohd Azman Yahya
Keyword(s):  
Experimental Data ◽  
Tensile Properties ◽  
Coefficient Of Determination ◽  
Elastic Behaviour ◽  
Uniaxial Tensile ◽  
Tensile Behaviour ◽  
Uniaxial Tensile Test ◽  
Constitutive Function ◽  
Yeoh Model ◽  
Fitting Model

The utilisation of bamboo has the potential of improving the properties of silicone. However, a thorough investigation has yet to be reported on the mechanical properties of bamboo silicone biocomposite. This study was carried out with the aim to quantify the tensile properties and assess the tensile behaviour of bamboo silicone biocomposite using Yeoh hyperelastic constitutive function. The specimens were prepared from the mix of bamboo particulate and pure silicone at various fibre composition ratio (0wt%, 1wt%, 3wt% and 5wt%) cured overnight at room temperature. A uniaxial tensile test was carried out by adopting the ASTM D412 testing standard. The Coefficient of Variation, CV, and the Coefficient of Determination, r2, were determined to assess the reliability of the experimental data and fitting model. The results of the determined Yeoh material constants for 5wt% specimen is found to be C1 = 12.0603×10-3 MPa, C2 = 8.7353×10-5 MPa and C3 = -11.6165×10-8 MPa, compared to pure silicone (0wt%) C1 = 5.6087×10-3 MPa, C2 = 8.6639×10-5 MPa and C3 = -7.6510×10-8 MPa. The results indicate that the bamboo fibre improves the stiffness of the silicone rubber by 115 percent. A low variance was exhibited by the experimental data with a CV value of less than 8 percent. The Yeoh Model demonstrated an excellent prediction of the elastic behaviour of bamboo silicone biocomposite with a fitting accuracy of more than 99.93 percent.  

scholarly journals Constitutive Models for the Tensile Behaviour of TRM Materials: Literature Review and Experimental Verification

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 700
Author(s):  
Maria Concetta Oddo ◽  
Giovanni Minafò ◽  
Lidia La Mendola
Keyword(s):  
State Of The Art ◽  
Constitutive Models ◽  
Stress Transfer ◽  
Theoretical Models ◽  
Tensile Tests ◽  
Analytical Models ◽  
Tensile Behaviour ◽  
Tensile Response ◽  
Textile Reinforced Mortar ◽  
Inorganic Matrix

In recent years, the scientific community has focused its interest on innovative inorganic matrix composite materials, namely TRM (Textile Reinforced Mortar). This class of materials satisfies the need of retrofitting existing masonry buildings, by keeping the compatibility with the substrate. Different recent studies were addressed to improve the knowledge on their mechanical behaviour and some theoretical models were proposed for predicting the tensile response of TRM strips. However, this task is complex due to the heterogeneity of the constituent materials and the stress transfer mechanism developed between matrix and fabric through the interface in the cracked stage. This paper presents a state-of-the-art review on the existing constitutive models for the tensile behavior of TRM composites. Literature experimental results of tensile tests on TRM coupons are presented and compared with the most relevant analytical models proposed until now. Finally, a new experimental study is presented and its results are used to further verify the reliability of the literature expressions.

scholarly journals Texture Selection Mechanisms during Recrystallization and Grain Growth of a Magnesium-Erbium-Zinc Alloy

Metals ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 171
Author(s):  
Fatim-Zahra Mouhib ◽  
Fengyang Sheng ◽  
Ramandeep Mandia ◽  
Risheng Pei ◽  
Sandra Korte-Kerzel ◽  
...  
Keyword(s):  
Grain Growth ◽  
Ternary Alloy ◽  
Solute Drag ◽  
Tensile Tests ◽  
Electron Back Scatter Diffraction ◽  
Zinc Alloy ◽  
Uniaxial Tensile ◽  
Microstructural Stability ◽  
Solid Solution Strengthening ◽  
Zener Drag

Binary and ternary Mg-1%Er/Mg-1%Er-1%Zn alloys were rolled and subsequently subjected to various heat treatments to study texture selection during recrystallization and following grain growth. The results revealed favorable texture alterations in both alloys and the formation of a unique ±40° transvers direction (TD) recrystallization texture in the ternary alloy. While the binary alloy underwent a continuous alteration of its texture and grain size throughout recrystallization and grain growth, the ternary alloy showed a rapid rolling (RD) to transvers direction (TD) texture transition occurring during early stages of recrystallization. Targeted electron back scatter diffraction (EBSD) analysis of the recrystallized fraction unraveled a selective growth behavior of recrystallization nuclei with TD tilted orientations that is likely attributed to solute drag effect on the mobility of specific grain boundaries. Mg-1%Er-1%Zn additionally exhibited a stunning microstructural stability during grain growth annealing. This was attributed to a fine dispersion of dense nanosized particles in the matrix that impeded grain growth by Zener drag. The mechanical properties of both alloys were determined by uniaxial tensile tests combined with EBSD assisted slip trace analysis at 5% tensile strain to investigate non-basal slip behavior. Owing to synergic alloying effects on solid solution strengthening and slip activation, as well as precipitation hardening, the ternary Mg-1%Er-1%Zn alloy demonstrated a remarkable enhancement in the yield strength, strain hardening capability, and failure ductility, compared with the Mg-1%Er alloy.

Comprehensive study on mechanical properties of coated biaxial warp-knitted fabrics

2021 ◽  
pp. 073168442110204
Author(s):  
Bin Yang ◽  
Yingying Shang ◽  
Zeliang Yu ◽  
Minger Wu ◽  
Youji Tao ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Failure Modes ◽  
Least Squares Method ◽  
Tensile Tests ◽  
Tensile Creep ◽  
Base Layer ◽  
Sustained Load ◽  
Uniaxial Tensile ◽  
Membrane Structures ◽  
Knitted Fabrics

In recent years, coated fabrics have become the major material used in membrane structures. Due to the special structure of base layer and mechanical properties, coated biaxial warp-knitted fabrics are increasingly applied in pneumatic structures. In this article, the mechanical properties of coated biaxial warp-knitted fabrics are investigated comprehensively. First, off-axial tensile tests are carried out in seven in-plane directions: 0°, 15°, 30°, 45°, 60°, 75°, and 90°. Based on the stress–strain relationship, tensile strengths are obtained and failure modes are studied. The adaptability of Tsai–Hill criterion is analyzed. Then, the uniaxial tensile creep test is performed under 24-h sustained load and the creep elongation is calculated. Besides, tearing strengths in warp and weft directions are obtained by tearing tests. Finally, the biaxial tensile tests under five different load ratios of 1:1, 2:1, 1:2, 1:0, and 0:1 are carried out, and the elastic constants and Poisson’s ratio are calculated using the least squares method based on linear orthotropic assumption. Moreover, biaxial specimens under four load ratios of 3:1, 1:3, 5:1, and 1:5 are further tensile tested to verify the adaptability of linear orthotropic model. These experimental data offer a deeper and comprehensive understanding of mechanical properties of coated biaxial warp-knitted fabrics and could be conveniently adopted in structural design.

scholarly journals Microstructure, Hardness, and Tensile Properties of Vacuum Carburizing Gear Steel

Metals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 300
Author(s):  
Wu Chen ◽  
Xiaofei He ◽  
Wenchao Yu ◽  
Maoqiu Wang ◽  
Kefu Yao
Keyword(s):  
Tensile Properties ◽  
Tensile Tests ◽  
Case Depth ◽  
Strain Hardening Exponent ◽  
Austenitizing Temperature ◽  
Vacuum Carburizing ◽  
Experimental Steel ◽  
Strain Behavior ◽  
Carburized Steel ◽  
Vacuum Carburization

We investigated the effects of the austenitizing temperature on the microstructure, hardness, and tensile properties of case-carburized steel after vacuum carburization at 930 °C and then re-austenitization at 820–900 °C followed by oil quenching and tempering. The results show that fractures occurred early with the increase in the austenitizing temperature, although all the carburized specimens showed a similar case hardness of 800 HV0.2 and case depth of 1.2 mm. The highest fracture stress of 1919 MPa was obtained for the experimental steel when the austenitizing temperature was 840 °C due to its fine microstructure and relatively high percentage of retained austenite transformed into martensite during the tensile tests. We also found that the stress–strain behavior of case-carburized specimens could be described by the area-weighted curves of the carburized case and the core in combination. The strain hardening exponent was about 0.4 and did not vary with the increase in the austenitizing temperature. We concluded that the optimum austenitizing temperature was around 840 °C for the experimental steel.

scholarly journals Influence of Mechanical Vibration Moulding Process on the Tensile Properties of TiC Reinforced LM6 Alloy Composite Castings

2011 ◽  
Vol 66-68 ◽  
pp. 1207-1212 ◽  
Author(s):  
Mohd Sayuti ◽  
Shamsuddin Sulaiman ◽  
B.T. Hang Tuah Baharudin ◽  
M.K.A.M. Arifin ◽  
T.R. Vijayaram ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Titanium Carbide ◽  
Tensile Properties ◽  
Mechanical Vibration ◽  
Weight Fraction ◽  
Tensile Tests ◽  
Alloy Matrix ◽  
Remarkable Effect ◽  
Moulding Process ◽  
Particulate Reinforced

Vibrational moulding process has a remarkable effect on the properties of castings during solidification processing of metals, alloys, and composites. This research paper discusses on the investigation of mechanical vibration mould effects on the tensile properties of titanium carbide particulate reinforced LM6 aluminium alloy composites processed with the frequencies of 10.2 Hz, 12 Hz and 14 Hz. In this experimental work, titanium carbide particulate reinforced LM6 composites were fabricated by carbon dioxide sand moulding process. The quantities of titanium carbide particulate added as reinforcement in the LM6 alloy matrix were varied from 0.2% to 2% by weight fraction. Samples taken from the castings and tensile tests were conducted to determine the tensile strength and modulus of elasticity. The results showed that tensile strength of the composites increased with an increase in the frequency of vibration and increasing titanium carbide particulate reinforcement in the LM6 alloy matrix.

Sign in / Sign up

Export Citation Format

Share Document