scholarly journals Hydrophilic Films Based on Carboxymethylated Derivatives of Starch and Cellulose

Polymers ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2447
Author(s):  
Katarzyna Wilpiszewska ◽  
Adrian Krzysztof Antosik ◽  
Beata Schmidt ◽  
Jolanta Janik ◽  
Joanna Rokicka
Keyword(s):  
Surface Roughness ◽  
Tensile Strength ◽  
Thermal Properties ◽  
Physicochemical Properties ◽  
Moisture Absorption ◽  
Weight Ratio ◽  
Mechanical And Thermal Properties ◽  
Film Preparation ◽  
Polysaccharide Derivatives ◽  
Derivatives Of

The carboxymethylated derivatives of starch (CMS) and cellulose (CMC) were used for film preparation. The infrared spectroscopy revealed that crosslinking via ester bridges with citric acid occurred between the two polysaccharide derivatives. The effect of polysaccharide derivatives ratio on physicochemical properties of prepared films was evaluated. Generally, the values of tested parameters (moisture absorption, surface roughness, and mechanical and thermal properties) were between the values noted for neat CMS or CMC-based films. However, the physicochemical properties of the system with equal CMS/CMC weight ratio diverged from this trend, i.e., the highest tensile strength, the highest Young’s modulus (ca. 3.4 MPa and ca. 4.9 MPa, respectively), with simultaneously the lowest moisture absorption (18.5% after 72 h) have been noted. Such systems could potentially find application in agriculture or pharmacy.

A Novel Packing Hollow Dodecahedron Model to Study the Mechanical and Thermal Properties of Stocastic Metallic Foams

2021 ◽  
Author(s):  
Rui Dai ◽  
Beomjin Kwon ◽  
Qiong Nian
Keyword(s):  
Thermal Properties ◽  
Physical Properties ◽  
Three Dimensional ◽  
Weight Ratio ◽  
High Strength ◽  
Specific Area ◽  
Deposition Process ◽  
Metallic Foam ◽  
Thermal Testing ◽  
Mechanical And Thermal Properties

Abstract Stochastic foam with hierarchy order pore structure possesses distinguished physical properties such as high strength to weight ratio, super lightweight, and extremely large specific area. These exceptional properties make stochastic foam as a competitive material for versatile applications e.g., heat exchangers, battery electrodes, automotive components, magnetic shielding, catalyst devices and etc. Recently, the more advanced hollow cellular (shellular) architectures with well-developed structure connections are studied and expected to surpass the solid micro/nanolattices. However, in terms of theoretical predicting and studying of the cellular foam architecture, currently no systematic model can be utilized to accurately capture both of its mechanical and thermal properties especially with hollow struts due to complexity induced by its stochastic and highly reticulate nature. Herein, for the first time, a novel packing three-dimensional (3D) hollow dodecahedron (HPD) model is proposed to simulate the cellular architecture. An electrochemical deposition process is utilized to manufacture the metallic foam with hollow struts. Mechanical and thermal testing of the as-manufactured foams are carried out to compare with the HPD model. HPD model is proved to accurately capture both the topology and the physical properties of stochastic foam at the similar relative density. Particularly, the proposed model makes it possible to readily access and track the physical behavior of stochastic foam architecture. Accordingly, this work will also offer inspiration for designing an efficient foam for specific applications.

scholarly journals Experimental investigations into mechanical and thermal properties of rapid manufactured copper parts

2019 ◽  
Vol 234 (1) ◽  
pp. 82-95 ◽  
Author(s):  
Gurminder Singh ◽  
Pulak M Pandey
Keyword(s):  
Thermal Conductivity ◽  
Tensile Strength ◽  
Thermal Properties ◽  
Ultimate Tensile Strength ◽  
Heating Rate ◽  
Sintering Temperature ◽  
Mechanical And Thermal Properties ◽  
Surface Porosity ◽  
Soaking Time ◽  
Ultrasonic Assisted

In the present paper, mechanical and thermal properties of rapidly manufactured copper parts were studied. The combination of three-dimensional printing and ultrasonic assisted pressureless sintering was used to fabricate copper parts. First, the ultimate tensile strength and thermal conductivity were compared between ultrasonic assisted and conventional pressureless sintered samples. The homogenously mixing of particles and local heat generation by ultrasonic vibrations promoted the sintering driving process and resulted in better mechanical and thermal properties. Furthermore, response surface methodology was adopted for the comprehensive study of the ultrasonic sintering parameters (sintering temperature, heating rate, and soaking time with ultrasonic vibrations) on ultimate tensile strength and thermal conductivity of the fabricated sample. Analysis of variance was performed to identify the significant factors and interactions. The image processing method was used to identify the surface porosity at different parameter levels to analyse the experimental results. High ultimate tensile strength was obtained at high sintering temperature, long soaking time, and slow heating rate with low surface porosity. After 60 min of soaking time, no significant effect was observed on the thermal conductivity of the fabricated sample. The significant interactions revealed less effect of soaking time at low sintering temperatures for ultimate tensile strength and less effect of heating rate at low sintering temperatures for thermal conductivity. Multi-objective optimization was carried out to identify parameters for maximum ultimate tensile strength and maximum thermal conductivity.

MECHANICAL AND THERMAL PROPERTIES OF SAWDUST CONCRETE

2017 ◽  
Vol 79 (6) ◽  
Author(s):  
Ruhal Pervez Memon ◽  
Abdul Rahman Mohd. Sam ◽  
A. S. M. Abdul Awal ◽  
Lemar Achekzai
Keyword(s):  
Heat Transfer ◽  
Mechanical Properties ◽  
Tensile Strength ◽  
Thermal Properties ◽  
Lightweight Concrete ◽  
Physical And Mechanical Properties ◽  
Developing Nations ◽  
Mechanical And Thermal Properties ◽  
Construction Technology ◽  
Long Duration

 Industrialization in developing countries has resulted in an increase in agricultural output and consequent accumulation of unmanageable agro wastes. Pollution arising from such wastes is a matter of concern for many developing nations. The aim of this study is to investigate the behavior of lightweight concrete and the utilization of sawdust as waste material in concrete. This paper focuses on the manufacturing of concrete which possess long duration heat transfer by using sawdust waste. In this research, cement to sawdust ratio of 1:1, 1:2 and 1:3 by volume was prepared for sawdust concrete, and the ratio of sand was kept constant that is 1. At these ratios, the mechanical and thermal properties like density, workability, strength and heat transfer were measured after, 7, 28 and 56 days of air curing. The tests results show that with the increase in the amount of sawdust, the workability, compressive strength, tensile strength and flexural strength decreased. It also resulted in reduction of heat transfer of sawdust concrete. Taking into account the overall physical and mechanical properties, sawdust concrete can be used in construction technology. 

Mechanical and Thermal Properties of Epoxy Composites Containing Amine-Modified Silica Nanoparticles

2017 ◽  
Vol 737 ◽  
pp. 262-268
Author(s):  
Hye Ryun Lee ◽  
Moon Il Kim ◽  
Hye Ryun Na ◽  
Choong Sun Lim ◽  
Bong Kuk Seo
Keyword(s):  
Tensile Strength ◽  
Glass Transition ◽  
Thermal Properties ◽  
Silica Nanoparticles ◽  
Flexural Modulus ◽  
Silica Particles ◽  
Test Machine ◽  
Mechanical And Thermal Properties ◽  
Modified Silica ◽  
Modified Silica Nanoparticles

Epoxy/silica composites were prepared using aminopropyl triethoxysilane (APTES)-modified silica nanoparticles in the sol state. Different sizes of silica particles were synthesized and they were applied into the epoxy/silica composites with different compositions. The mechanical and thermal properties of the composites were investigated and compared with those of pristine epoxy composite. The structure and morphology of the modified silica nanoparticles and epoxy/silica composites were analyzed using field emission scanning electron microscope. The flexural modulus and tensile strength of the epoxy/silica composites were investigated by universal test machine (UTM). Also, glass transition and thermal stability were investigated using thermomechanical analyzer (TMA). Sizes of silica particles in sol state were controlled by using different concentration of the accelerator. The tensile strength of epoxy/silica composites containing 20 wt% of 30 nm silica was found to be 37.98 MPa. In addition, the glass transition temperature (Tg) decreased with increasing silica particle sizes.

Effect of chain extender on the mechanical and thermal resistance properties of polyurethane liners for composite propellants

Polyurethanes ◽  
2016 ◽  
Vol 1 (1) ◽  
Author(s):  
P. Ross ◽  
G. Sevilla ◽  
J. Quagliano
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Thermal Properties ◽  
Chain Extender ◽  
Molecular Structures ◽  
Polymer Chains ◽  
Mechanical And Thermal Properties ◽  
Thermal Changes ◽  
Ft Ir ◽  
Chain Lengths

AbstractPolyurethane formulations utilized as liners for composite propellants were prepared by the reaction of toluene-2,4-diisocyanate (TDI) and isophorone diisocyanate (IPDI) with hydroxyl terminated polybutadiene (HTPB), while polymer chains were further extended with neopentyl glycol diol, NPG triol and two different triols (monoglyceryl ricinoleate, MRG and trimethylolpropane, TMP). Liners were formulated with micronized titanium dioxide mechanically dispersed in hydroxyl-terminated polybutadiene (HTPB). The molecular structures of liners were confirmed by FT-IR. Thermal properties indicated that the nature of chain extender (crosslinker) only slightly affected the temperatures for decomposition of liners. Two main thermal changes were found at 370∘C and another at around 440–500∘C, depending on the chain extender utilized. On the other side, mechanical properties varied within the range of 0,7-1,8 MPa, consistent with this kind of elastomers. Tensile strength at break was only significantly affected with TMP and MRG-chain extended liners at the lowest concentrations tested of 1,3 and 2% (w/w), respectively. However, the behaviour depended on whether TDI or IPDI isocyanate was utilized for curing. TMP 1,3% crosslinked liner cured with TDI had a tensile strength of 1,82MPa whileMRG-crosslinked liner cured with IPDI had a tensile strength of 1,56 MPa. It was observed that at the higher NCO/OH ratios essayed, tensile strength and hardness increased, improving mechanical properties. Our results confirmed that TMP and MRG triols together with NPG diols can be used to tailor mechanical and thermal properties of liners, considering their different hydroxyl functionalities and chain lengths.

scholarly journals Mechanical and Thermal Properties of Poly(urethane urea) Nanocomposites Prepared with Diamine-Modified Laponite

2008 ◽  
Vol 2008 ◽  
pp. 1-9 ◽  
Author(s):  
Joe-Lahai Sormana ◽  
Santanu Chattopadhyay ◽  
J. Carson Meredith
Keyword(s):  
Tensile Strength ◽  
Thermal Properties ◽  
Tensile Properties ◽  
Particle Concentration ◽  
Chain Extender ◽  
Mechanical And Thermal Properties ◽  
Elongation At Break ◽  
Hard Domain ◽  
A Chain

Nanocomposites based on segmented poly(urethane urea) were prepared by reacting a poly(diisocyanate) with diamine-modified Laponite-RD nanoparticles that served as a chain extender. The nanocomposites were prepared at a constantNH2to NCO mole ratio of 0.95, while varying the fraction of diamine-modified Laponite relative to the free diamine chain extender. Compared to neat poly(urethane urea), all nanocomposites showed increased tensile strength and elongation at break. As Laponite loading increased, tensile properties passed through a maximum at a particle concentration of 1 mass%, at which a 300% increase in tensile strength and 40% increase in elongation at break were observed. A maximum in urea and urethane hard-domain melting endotherms was also observed at this Laponite loading. Optimal mechanical and thermal properties coincided with a minimum in the size of the inorganic Laponite phase. Nanocomposites containing diamine-modified Laponite had higher tensile strengths than those with nonreactive monoamine-modified Laponite or diamine-modified Cloisite.

Dispersion, mechanical and thermal properties of nano graphite platelets reinforced flouroelastomer composites

e-Polymers ◽  
2008 ◽  
Vol 8 (1) ◽  
Author(s):  
Deng Xu ◽  
V. Sridhar ◽  
Thanh Tu Pham ◽  
Jin Kuk Kim
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Tensile Strength ◽  
Thermal Properties ◽  
Thermogravimetric Analysis ◽  
Fracture Surface ◽  
Exfoliated Graphite ◽  
Mechanical And Thermal Properties ◽  
Reinforcing Fillers ◽  
Processing Of Composites

AbstractThe potential of exfoliated graphite nano platelets (xGnP™) as reinforcing fillers in flouroelastomer has been investigated. The dispersion of the nano graphite platelets in the polymer matrix has been investigated by WAXD, SEM, TEM, EPMA and AFM. WAXD studies indicated that the processing of composites did not change the inter-gallery distance (d-spacing) of the graphite platelets. The effect of increasing nano graphite loadings on mechanical properties like tensile strength, modulus and tear resistance has been studied. Formation of weld lines on the fracture surface of the composite has been observed by SEM. The thermal stability was determined using thermogravimetric analysis. The composites showed higher thermal stability in comparison with nonreinforced polymer.

scholarly journals Study the Effect of Different Percentages of Natural (Orange Peels and Date Seeds) and Industrial Materials (Carbon and Silica) on the Mechanical and Thermal Properties of Polymeric Reinforced Composites

2018 ◽  
Vol 14 (4) ◽  
pp. 16-23
Author(s):  
Haydar Abed Dahad ◽  
Sameh Fareed Hasan ◽  
Ali Hussein Alwan
Keyword(s):  
Thermal Conductivity ◽  
Composite Material ◽  
Thermal Properties ◽  
Young’S Modulus ◽  
Weight Ratio ◽  
Mechanical And Thermal Properties ◽  
Orange Peels ◽  
Industrial Materials ◽  
Flexural Tests ◽  
Natural Composite

Mechanical and thermal properties of composites, consisted of unsaturated polyester resin, reinforced by different kinds of natural materials (Orange peels and Date seeds) and industrial materials (carbon and silica) with particle size 98 µm were studied. Various weight ratios, 5, 10, and 15 wt. % of natural and industrial materials have been infused into polyester. Tensile, three-point bending and thermal conductivity tests were conducted for the unfilled polyester, natural and industrial composite to identify the weight ratio effect on the properties of materials. The results indicated that when the weight ratio for polyester with date seeds increased from 10% to 15%, the maximum Young’s modulus decreased by 54%. When the weight ratio was 5%, the maximum Young’s modulus, yield stress and ultimate tensile stress occurred in the polyester with date seeds. The results of tensile and flexural tests showed that the natural composite material has a higher strength than the industrial material. While the results of flexural tests manifested that the maximum improvement in the flexural strength is obtained for orange peels at 5 wt. %, where the maximum increasing percentage is 153.4% than pure polyester. The thermal conductivity of orange peels decreased to the half value when the weight ratio increased from 10% to 15%. The thermal conductivity for polyester with orange peels was greater than the thermal conductivity of polyester with date seeds with maximum percentage occurred at weight ratio 10% is 14.4%, but the thermal conductivity of the industrial composite material was higher than the natural composite material. Finally, the date seeds composite was a good insulator and it had a reduced heat transfer rate in comparison to the rest of the samples, also the maximum variation of temperature with time occurred in date seeds composite.

scholarly journals Development of novel biodegradable nanocomposites for bone repair applications

2021 ◽  
Author(s):  
Samin Eftekhari
Keyword(s):  
Thermal Properties ◽  
Mass Loss ◽  
Young’S Modulus ◽  
Bone Repair ◽  
Young's Modulus ◽  
Weight Ratio ◽  
Weight Fraction ◽  
Influential Factor ◽  
Mechanical And Thermal Properties ◽  
Biodegradable Nanocomposites

The main goal of this research is to introduce novel series of biodegradable nanocomposites that closely mimic the characteristics of real bone such as mechanical and thermal properties. These nanocomposites are composed of cotton-sourced cellulose microcrystals (MCC), hydroxyapatite nanoparticles (HA) and Poly L-Lactic Acid (PLLA). A novel fabrication route is used to manufacture MA and MH series of nanocomposites. MA series was developed to find an optimum range for weight fraction of each constituent required for design of the MH series. Evaluation of the thermal properties of MA series showed that increasing of weight ratio of MCC and HA from 0 to 21 Wt% increased the crystallinity up to 38%. Compression test results of them revealed that increasing the weight fraction of MCC or HA from 0 to 21Wt% enhanced the compressive yield stress from 0.127 to 2.2 MPa and the Young’s modulus from 6.6 to 38 MPa. The cytotoxicity assay results showed there was no sign of toxic material affecting on viability of cells. The MH series was designed and fabricated by selecting a narrower range of weight fraction of the constituents. A design of experiments was used to alter the composition of the constituents to assess their contributions and their effect onto the mechanical properties and biodegradation behaviour of the MH series of the nanocomposites. The weight ratio of MCC to HA, the concentration of PLLA, and the porogen content were chosen as varying factors. A model that accurately predicts the optimum parameter setting was created. Analysis of variance statistical analysis showed that the ratio of MCC to HA was the most influential factor affecting the compressive yield and the mass loss, while the porogen content was the most detrimental factor affecting the Young’s modulus of MH series of nanocomposites had no significant effect on their rate of the mass loss. The nanocomposites with highest weight ratio 4 of MCC to HA, showed maximum mechanical strength and the lowest water absorption and the lowest mass loss. It was found two series of nanocomposites was comparable to trabecular bone from a compositional, structural, thermal, mechanical point of view.

The Influence of Moisture Absorption on the Mechanical and Thermal Properties of Chemically Treated DPL Reinforced Hybrid Composite

2020 ◽  
Vol 978 ◽  
pp. 316-322 ◽  
Author(s):  
Priyadarshi Tapas Ranjan Swain ◽  
Sankar Narayan Das ◽  
Prabina Kumar Patnaik ◽  
Abhilash Purohit
Keyword(s):  
Thermal Properties ◽  
Glass Fiber ◽  
Moisture Absorption ◽  
Natural Fiber ◽  
Hybrid Composites ◽  
Synthetic Fiber ◽  
Differential Scanning Calorimetric ◽  
Mechanical And Thermal Properties ◽  
Weight Percentage ◽  
Chemically Treated

Moisture absorption of natural fiber-based composites is one of the major problems in outdoor applications. The present study deals with the effect of moisture absorption on mechanical and thermal properties of unmodified/modified Date Palm Leaf (DPL) with glass fiber-based hybrid composites. Natural fibers were modified with alkaline treatment to improve fiber and matrix bonding. Conventional hand lay-up technique is used to fabricate the composites with varying different wt.% of treated and untreated short DPL with constant wt.% of glass fiber and prepared with random oriented manner. The combine effect of hydrophilic and hydrophobic nature find out as the study based upon the natural with synthetic fiber hybrid composites. Mechanical behaviour of the epoxy-based hybrid composites were characterized by using tensile, flexural and hardness test. The results revealed that significant improvement in mechanical properties by the addition of different weight percentage of modified DPL. Different thermal properties of the composites were described by using Thermo Gravimetric Analyzer (TGA) and Differential Scanning Calorimetric (DSC). Morphological investigation was carried out to by using scanning electron microscope. All the properties of untreated natural fiber reinforced composites were mostly affected by the influence of water absorption as compared with chemically treated based composites.

Sign in / Sign up

Export Citation Format

Share Document