scholarly journals Optimization of Preparation Conditions for Side-Emitting Polymer Optical Fibers Using Response Surface Methodology

Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 3062 ◽  
Author(s):  
Xianjin Hu ◽  
Kun Yang ◽  
Cheng Zhang
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Optical Fibers ◽  
Treatment Time ◽  
Breaking Strength ◽  
Volume Ratio ◽  
Illumination Intensity ◽  
Quadratic Model ◽  
Optimal Conditions ◽  
Polymer Optical Fibers

Polymer optical fibers (POFs) were used for preparing side-emitting polymer optical fibers (SPOFs), which were processed with acetone and n-hexane combined in selected proportions by a solvent treatment method. The effects of the volume ratio of acetone to n-hexane and treatment time on response variable factors were investigated. The center composite design (CCD) based response surface methodology (RSM), a quadratic model, and a two-factor interaction model were developed to relate the preparation variables of illumination intensity, breaking strength, and rigidity. According to analysis of variance (ANOVA), the factors affecting the optimization of each response factor were determined. The predicted values after process optimization were found to be highly similar to the experimental values. The optimal conditions for the preparation of SPOF were as follows: the volume ratio of acetone to hexane was 1.703, and the treatment time was 2.716 s. The three response variables of SPOF prepared under the optimal conditions were: illumination intensity 19.339 mV, breaking strength 5.707 N, and rigidity 572.013 N·mm2.

scholarly journals Application of Box-Behnken design with response surface methodology for modeling and optimizing ultrasonic oxidation of arsenite with H2O2

2014 ◽  
Vol 12 (2) ◽  
pp. 164-172 ◽  
Author(s):  
Pengpeng Qiu ◽  
Mingcan Cui ◽  
Kyounglim Kang ◽  
Beomguk Park ◽  
Yonggyu Son ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Power Density ◽  
Quadratic Model ◽  
H2o2 Concentration ◽  
Optimal Conditions ◽  
Combined Process ◽  
Box Behnken Design ◽  
Oxidation Efficiency ◽  
And Control

AbstractA combined ultrasound (US)/H2O2 process was used to oxidize arsenite to arsenate, yielding a synergistic effect value of 1.26. This showed that the combined process could be an effective method of oxidizing arsenite, instead of using either ultrasonic or H2O2 oxidation processes. This combined process was successfully modeled and optimized using a Box-Behnken design with response surface methodology (RSM). The effects of the US power density, the initial concentration of arsenite, and the H2O2 concentration on the sonochemical oxidation efficiency of arsenite were investigated. Analysis of variance indicated that the proposed quadratic model successfully interpreted the experimental data with coefficients of determination of R 2 = 0.95 and adjusted R 2 = 0.91. Through this model, we can predict and control the oxidation efficiency under different conditions. Furthermore, the optimal conditions for the oxidation of arsenite were found to be a US power density of 233.26 W L−1, an initial arsenite concentration of 0.5 mg L−1, and an H2O2 concentration of 74.29 mg L−1. The predicted oxidation efficiency obtained from the RSM under the optimal conditions was 88.95%. A confirmation test of the optimal conditions verified the validity of the model, yielding an oxidation efficiency of 90.1%.

scholarly journals Optimization of Ultrasound-Assisted Extraction of Total Flavonoids from Dendranthema indicum var. aromaticum by Response Surface Methodology

2019 ◽  
Vol 2019 ◽  
pp. 1-10
Author(s):  
Lijie Zhong ◽  
Yi Liu ◽  
Bin Xiong ◽  
Lin Chen ◽  
Yaohua Zhang ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Volume Ratio ◽  
Quadratic Model ◽  
Total Flavonoids ◽  
Ultrasound Assisted Extraction ◽  
Assisted Extraction ◽  
Ultrasound Assisted ◽  
Solid Liquid ◽  
Operating Method

Dendranthema indicum var. aromaticum is a new species with strong fragrance and is used as a herbal medicine by Chinese folks. The abundant flavonoids play important roles in its pharmacological activities. In this study, an ultrasound-assisted method was used to extract total flavonoids (TF) from D. indicum var. aromaticum by response surface methodology. A quadratic model was developed to optimize the extraction conditions, whose accuracy was verified by statistic analysis. Ethanol and acetic acid at the volume ratio of 70% : 2% were selected as the extract solvent. The optimized extraction conditions were as follows: extraction time, 40 min; solid/liquid ratio, 1 : 23 g/mL; and temperature, 60°C. This is the first report of an efficient and easy-operating method for TF extraction from D. indicum var. aromaticum. Besides, this study provides reference for future pharmacological research on D. indicum var. aromaticum and extraction of bioactive components from other herbs.

EXTRACTION OPTIMIZATION AND ANTIOXIDANT ACTIVITY OF PHENOLIC COMPOUNDS FROM AVOCADO PEEL

2019 ◽  
pp. 49-59
Author(s):  
Nu Linh Giang Ton ◽  
Thi Hoai Nguyen ◽  
Quoc Hung Vo
Keyword(s):  
Antioxidant Activity ◽  
Response Surface Methodology ◽  
Antioxidant Capacity ◽  
Response Surface ◽  
Total Antioxidant Capacity ◽  
Total Phenolic Content ◽  
Phenolic Content ◽  
Quadratic Model ◽  
Total Phenolic ◽  
Total Antioxidant

Avocado peel has been considered as a potential source of natural antioxidants in which phenolics are among the most important compounds. Therefore, this study aims to optimize the extraction process of phenolics using response surface methodology and evaluate the corresponding antioxidant activity. From the quadratic model, the optimal condition was determined including the ethanol concentration 54.55% (v/v), the solvent/solute ratio 71.82/1 (mL/g), temperature 53.03 oC and extraction time 99.09 min. The total phenolic content and the total antioxidant capacity at this condition with minor modifications were 26,74 ± 0,04 (mg GAE/g DW) and 188.06 ± 1.41 (mg AAE/g DW), respectively. The significant correlation between total phenolic content and total antioxidant capacity was also confirmed. Key words: response surface methodology, central composite rotatable design, total phenolic content, total antioxidant capacity, avocado peel

scholarly journals Optimization of Lignin Extraction Variables by Response Surface Methodology from Pine Saw Dust, and Quantification of Major Structural Units in Isolated Lignin Fraction

2021 ◽  
Vol 11 (4) ◽  
pp. 1739
Author(s):  
Muhammad Ajaz Ahmed ◽  
Jae Hoon Lee ◽  
Joon Weon Choi
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Quantum Coherence ◽  
Resonance Spectrum ◽  
Quadratic Model ◽  
Molecular Weights ◽  
Solids Loading ◽  
A Value ◽  
Lignin Extraction ◽  
Lignin Fraction

A synergistic combination of dioxane, acetic acid, and HCl was investigated for lignin extraction from pine wood biomass. After initial screening of reagent combination, response surface methodology (RSM) was used to optimize the lignin yield with respect to the variables of time 24–72 h, solids loading 5–15%, and catalyst dose 5–15 mL. A quadratic model predicted 8.33% of the lignin yield, and it was further confirmed experimentally and through the analysis of variance (ANOVA). Lignin at optimum combination exhibited features in terms of derivatization followed by reductive cleavage (DFRC) with a value of (305 µmol/gm), average molecular weights of 4358 and polydispersity of 1.65, and 2D heteronuclear single quantum coherence nuclear magnetic resonance spectrum (2D-HSQC NMR) analysis showing relative β-O-4 linkages (37.80%). From here it can be suggested that this fractionation can be one option for high quality lignin extraction from lignocellulosic biomass.

scholarly journals Optimizing Adsorption of 17α-Ethinylestradiol from Water by Magnetic MXene Using Response Surface Methodology and Adsorption Kinetics, Isotherm, and Thermodynamics Studies

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3150
Author(s):  
Mengwei Xu ◽  
Chao Huang ◽  
Jing Lu ◽  
Zihan Wu ◽  
Xianxin Zhu ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Quadratic Model ◽  
Adsorption Efficiency ◽  
Process Variables ◽  
Adsorption Time ◽  
Initial Concentration ◽  
Independent Variables ◽  
The Impact ◽  
Adsorbent Dose

Magnetic MXene composite Fe3O4@Ti3C2 was successfully prepared and employed as 17α-ethinylestradiol (EE2) adsorbent from water solution. The response surface methodology was employed to investigate the interactive effects of adsorption parameters (adsorption time, pH of the solution, initial concentration, and the adsorbent dose) and optimize these parameters for obtaining maximum adsorption efficiency of EE2. The significance of independent variables and their interactions were tested by the analysis of variance (ANOVA) and t-test statistics. Optimization of the process variables for maximum adsorption of EE2 by Fe3O4@Ti3C2 was performed using the quadratic model. The model predicted maximum adsorption of 97.08% under the optimum conditions of the independent variables (adsorption time 6.7 h, pH of the solution 6.4, initial EE2 concentration 0.98 mg L−1, and the adsorbent dose 88.9 mg L−1) was very close to the experimental value (95.34%). pH showed the highest level of significance with the percent contribution (63.86%) as compared to other factors. The interactive influences of pH and initial concentration on EE2 adsorption efficiency were significant (p < 0.05). The goodness of fit of the model was checked by the coefficient of determination (R2) between the experimental and predicted values of the response variable. The response surface methodology successfully reflects the impact of various factors and optimized the process variables for EE2 adsorption. The kinetic adsorption data for EE2 fitted well with a pseudo-second-order model, while the equilibrium data followed Langmuir isotherms. Thermodynamic analysis indicated that the adsorption was a spontaneous and endothermic process. Therefore, Fe3O4@Ti3C2 composite present the outstanding capacity to be employed in the remediation of EE2 contaminated wastewaters.

Optimization of the Ultrasonic Extraction of Gypenoside III from Gynostemma pentaphyllum by Response Surface Methodology

2012 ◽  
Vol 550-553 ◽  
pp. 1866-1870
Author(s):  
Xiao Dan Tang ◽  
Hai Yang Hang ◽  
Shao Yan Wang ◽  
Jing Xiang Cong
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Extraction Yield ◽  
Raw Material ◽  
Extraction Temperature ◽  
Optimal Conditions ◽  
Gynostemma Pentaphyllum ◽  
Bioactive Component ◽  
Yield Value ◽  
Ultrasonic Time

Gypenosides III is a major bioactive component which is rich in Gynostemma pentaphyllum. For better utilization of the native resource, response surface methodology was used to optimize the extraction conditions of gypenosides III from G. pentaphyllum. The effects of three independent variables on the extraction yield of gypenosides III were investigated and the optimal conditions were evaluated by means of Box-Behnken design. The optimal conditions are as follows: ratio of ethanol to raw material 25, extraction temperature 58°C and ultrasonic time 25min. Under these conditions, the yield of gypenoside III is 1.216±0.05%, which is agreed closely with the predicted yield value.

scholarly journals Rheological properties of emulsions stabilized by green banana (Musa cavendishii) pulp fitted by power law model

2009 ◽  
Vol 52 (6) ◽  
pp. 1541-1553 ◽  
Author(s):  
Dayane Rosalyn Izidoro ◽  
Agnes de Paula Scheer ◽  
Maria-Rita Sierakowsk
Keyword(s):  
Response Surface Methodology ◽  
Rheological Properties ◽  
Response Surface ◽  
Power Law ◽  
Cone Angle ◽  
Rheological Behaviour ◽  
Quadratic Model ◽  
Soy Oil ◽  
Power Law Model ◽  
Green Banana

In this work, the rheological behaviour of emulsions (mayonnaises) stabilized by green banana pulp using the response surface methodology was studied. In addition, the emulsions stability was investigated. Five formulations were developed, according to design for constrained surfaces and mixtures, with the proportion, respectively: water/soy oil/green banana pulp: F1 (0.10/0.20/0.70), F2 (0.20/0.20/0.60), F3 (0.10/0.25/0.65), F4 (0.20/0.25/0.55) and F5 (0.15/0.225/0.625) .Emulsions rheological properties were performed with a rotational Haake Rheostress 600 rheometer and a cone and plate geometry sensor (60-mm diameter, 2º cone angle), using a gap distance of 1mm. The emulsions showed pseudoplastic behaviour and were adequately described by the Power Law model. The rheological responses were influenced by the difference in green banana pulp proportions and also by the temperatures (10 and 25ºC). The formulations with high pulp content (F1 and F3) presented higher shear stress and apparent viscosity. Response surface methodology, described by the quadratic model,showed that the consistency coefficient (K) increased with the interaction between green banana pulp and soy oil concentration and the water fraction contributed to the flow behaviour index increase for all emulsions samples. Analysis of variance showed that the second-order model had not significant lack-of-fit and a significant F-value, indicating that quadratic model fitted well into the experimental data. The emulsions that presented better stability were the formulations F4 (0.20/0.25/0.55) and F5 (0.15/0.225/0.625).

scholarly journals Optimizing Physiochemical and Sensory Properties of Infrared-Hot Air Roasted Sunflower Kernels Using Response Surface Methodology

2018 ◽  
Vol 2018 ◽  
pp. 1-14 ◽  
Author(s):  
Mahdis Mosayebi ◽  
Mahdi Kashaninejad ◽  
Leila Najafian
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Color Change ◽  
Specific Energy Consumption ◽  
Chemical Properties ◽  
Sensory Properties ◽  
Quadratic Model ◽  
Total Phenolic ◽  
Phenolic Contents ◽  
Hot Air

Roasting sunflower kernels is a key process in production of nuts. In this study, the effect of roasting conditions, including hot air temperature (120–160°C), infrared (IR) power (400–600 W) and roasting time (3–10 min) on energy and specific energy consumption, color parameters (L∗, a∗, b∗, ΔE, BI, SI, WI, and h°), texture, moisture content, chemical properties (pH and total phenolic contents, peroxide value (PV), and sensory properties of sunflower kernel were investigated. In addition, the best models for the responses were obtained, and the proper roasting conditions were determined using response surface methodology (RSM). A quadratic model was proposed for color change (L∗, ΔE, SI, and WI), moisture and total phenol contents, linear relation for a∗, b∗, h°, and 2FI for BI, texture, PV, and pH. Roasting at 425.7 W IR power and 124.3°C for 3.7 min was found to be convenient or proper roasting conditions.

scholarly journals Effects of Ultrasonic-Microwave-Assisted Technology on Hordein Extraction from Barley and Optimization of Process Parameters Using Response Surface Methodology

2018 ◽  
Vol 2018 ◽  
pp. 1-8 ◽  
Author(s):  
Xiao Guan ◽  
Lv Li ◽  
Jing Liu ◽  
Sen Li
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Microwave Power ◽  
Process Intensification ◽  
Extraction Yield ◽  
Extraction Time ◽  
Quadratic Model ◽  
Ultrasonic Power ◽  
Microwave Assisted ◽  
The Difference

We investigated the process intensification of ultrasonic-microwave-assisted technology for hordein extraction from barley. Response surface methodology was utilized to optimize the extraction conditions and to analyze the interaction between four selected variables: temperature, microwave power, ultrasonic power, and extraction time. The validated extraction yield of hordein reached 8.84% at 78°C, microwave power 298 W, and ultrasonic power 690 W after 20 min as optimum conditions. Compared with traditional water-bath extraction (4.7%), the ultrasonic-microwave-assisted technology effectively increased the hordein extraction yield and shortened the extraction time. According to the obtained quadratic model (R2 = 0.9457), ultrasonic power and extraction time were the first two significant factors. However, temperature limited the effects of other factors during extraction. SDS-PAGE and scanning electron microscopy were used to identify the hordein extract and to clarify the difference between the two hordein fractions extracted with new and traditional methods, respectively. Ultrasonic-microwave-assisted technology provided a new way to improve hordein extraction yield from barley and could be a good candidate for industrial application of process intensification.

scholarly journals Response surface methodology-artificial neural network based optimization and strain improvement of cellulase production by Streptomyces sp.

2020 ◽  
Vol 36 (4) ◽  
Author(s):  
Ega Soujanya Lakshmi ◽  
Manda Rama Narasinga Rao ◽  
Muddada Sudhamani
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Response Surface Methodology ◽  
Response Surface ◽  
Wild Strain ◽  
Cellulase Activity ◽  
Cellulase Production ◽  
Optimal Conditions ◽  
Zone Formation ◽  
Artificial Neural

ABSTRACT Thirty seven different colonies were isolated from decomposing logs of textile industries. From among these, a thermotolerant, grampositive, filamentous soil bacteria Streptomyces durhamensis vs15 was selected and screened for cellulase production. The strain showed clear zone formation on CMC agar plate after Gram’s iodine staining.  Streptomyces durhamensis vs15 was further confirmed for cellulase production by estimating the reducing sugars through dinitrosalicylic acid (DNS) method. The activity was enhanced by sequential mutagenesis using three mutagens of ultraviolet irradiation (UV), N methyl-N’-nitro-N-nitrosoguanidine (NTG) and Ethyl methane sulphonate (EMS). After mutagenesis, the cellulase activity of GC23 (mutant) was improved to 1.86 fold compared to the wild strain (vs15). Optimal conditions for the production of cellulase by the GC 23 strain were evaluated using Response Surface Methodology (RSM) and Artificial Neural Network (ANN). Effect of pH, temperature, duration of incubation, , and substrate concentration on cellulase production were evaluated. Optimal conditions for the production of cellulase enzyme using Carboxy Methyl Cellulase as a substrate are 55 oC of temperature, pH of 5.0 and incubation for 40 h. The cellulase activity of the mutant Streptomyces durhamensis GC23 was further optimised to 2 fold of the activity of the wild type by RSM and ANN.  

Sign in / Sign up

Export Citation Format

Share Document