scholarly journals Dielectric Spectroscopy of Hybrid Magnetoactive Elastomers

Polymers ◽  
2021 ◽  
Vol 13 (12) ◽  
pp. 2002
Author(s):  
Vitaliy G. Shevchenko ◽  
Gennady V. Stepanov ◽  
Elena Yu. Kramarenko
Keyword(s):  
Dielectric Properties ◽  
Dielectric Response ◽  
Magnetic Particles ◽  
Interacting Particles ◽  
Hybrid Filler ◽  
Size Mismatch ◽  
Practical Applications ◽  
Magnetically Hard ◽  
Average Size ◽  
Magnetization Field

Dielectric properties of two series of magnetoactive elastomers (MAEs) based on a soft silicone matrix containing 35 vol% of magnetic particles were studied experimentally in a wide temperature range. In the first series, a hybrid filler representing a mixture of magnetically hard NdFeB particles of irregular shape and an average size of 50 μm and magnetically soft carbonyl iron (CI) of 4.5 μm in diameter was used for MAE fabrication. MAEs of the second series contained only NdFeB particles. The presence of magnetically hard NdFeB filler made it possible to passively control MAE dielectric response by magnetizing the samples. It was shown that although the hopping mechanism of MAEs conductivity did not change upon magnetization, a significant component of DC conductivity appeared in the magnetized MAEs presumably due to denser clustering of interacting particles resulting in decreasing interparticle distances. The transition from a non-conducting to a conducting state was more pronounced for hybrid MAEs containing both NdFeB and Fe particles with a tenfold size mismatch. Hybrid MAEs also demonstrated a considerable increase in the real part of the complex relative permittivity upon magnetization and its asymmetric behavior in external magnetic fields of various directions. The effects of magnetic filler composition and magnetization field on the dielectric properties of MAEs are important for practical applications of MAEs as elements with a tunable dielectric response.

scholarly journals The Primary Origin of Excellent Dielectric Properties of (Co, Nb) Co-Doped TiO2 Ceramics: Electron-Pinned Defect Dipoles vs. Internal Barrier Layer Capacitor Effect

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3230
Author(s):  
Theeranuch Nachaithong ◽  
Narong Chanlek ◽  
Pairot Moontragoon ◽  
Prasit Thongbai
Keyword(s):  
Dielectric Properties ◽  
Loss Tangent ◽  
Barrier Layer ◽  
Dielectric Response ◽  
High Resistivity ◽  
Low Loss ◽  
Rutile Tio2 ◽  
Complex Defect ◽  
Very High ◽  
Co Doped

(Co, Nb) co-doped rutile TiO2 (CoNTO) nanoparticles with low dopant concentrations were prepared using a wet chemistry method. A pure rutile TiO2 phase with a dense microstructure and homogeneous dispersion of the dopants was obtained. By co-doping rutile TiO2 with 0.5 at.% (Co, Nb), a very high dielectric permittivity of ε′ » 36,105 and a low loss tangent of tanδ » 0.04 were achieved. The sample–electrode contact and resistive outer-surface layer (surface barrier layer capacitor) have a significant impact on the dielectric response in the CoNTO ceramics. The density functional theory calculation shows that the 2Co atoms are located near the oxygen vacancy, creating a triangle-shaped 2CoVoTi complex defect. On the other hand, the substitution of TiO2 with Nb atoms can form a diamond-shaped 2Nb2Ti complex defect. These two types of complex defects are far away from each other. Therefore, the electron-pinned defect dipoles cannot be considered the primary origins of the dielectric response in the CoNTO ceramics. Impedance spectroscopy shows that the CoNTO ceramics are electrically heterogeneous, comprised of insulating and semiconducting regions. Thus, the dielectric properties of the CoNTO ceramics are attributed to the interfacial polarization at the internal insulating layers with very high resistivity, giving rise to a low loss tangent.

scholarly journals Polytetrafluoroethylene Films in Rigid Polyurethane Foams’ Dielectric Permittivity Measurements with a One-Side Access Capacitive Sensor

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1173
Author(s):  
Ilze Beverte ◽  
Ugis Cabulis ◽  
Sergejs Gaidukovs
Keyword(s):  
Dielectric Properties ◽  
Dielectric Permittivity ◽  
Low Frequency ◽  
Capacitive Sensor ◽  
Polyurethane Foams ◽  
Active Area ◽  
Ptfe Film ◽  
Practical Applications ◽  
Permittivity Measurements ◽  
The Impact

As a non-metallic composite material, widely applied in industry, rigid polyurethane (PUR) foams require knowledge of their dielectric properties. In experimental determination of PUR foams’ dielectric properties protection of one-side capacitive sensor’s active area from adverse effects caused by the PUR foams’ test objects has to be ensured. In the given study, the impact of polytetrafluoroethylene (PTFE) films, thickness 0.20 mm and 0.04 mm, in covering or simulated coating the active area of one-side access capacitive sensor’ electrodes on the experimentally determined true dielectric permittivity spectra of rigid PUR foams is estimated. Penetration depth of the low frequency excitation field into PTFE and PUR foams is determined experimentally. Experiments are made in order to evaluate the difference between measurements on single PUR foams’ samples and on complex samples “PUR foams + PTFE film” with two calibration modes. A modification factor and a small modification criterion are defined and values of modifications are estimated in numerical calculations. Conclusions about possible practical applications of PTFE films in dielectric permittivity measurements of rigid PUR foams with one-side access capacitive sensor are made.

scholarly journals Tunable Adhesion of a Bio-Inspired Micropillar Arrayed Surface Actuated by a Magnetic Field

2018 ◽  
Vol 86 (1) ◽  
Author(s):  
Xingji Li ◽  
Zhilong Peng ◽  
Yazheng Yang ◽  
Shaohua Chen
Keyword(s):  
Magnetic Field ◽  
Applied Magnetic Field ◽  
Magnetic Particles ◽  
Rotation Angle ◽  
Adhesion Force ◽  
Practical Applications ◽  
Section Shape ◽  
Theoretical Predictions ◽  
Large Elastic Deformation ◽  
The Difference

Bio-inspired functional surfaces attract many research interests due to the promising applications. In this paper, tunable adhesion of a bio-inspired micropillar arrayed surface actuated by a magnetic field is investigated theoretically in order to disclose the mechanical mechanism of changeable adhesion and the influencing factors. Each polydimethylsiloxane (PDMS) micropillar reinforced by uniformly distributed magnetic particles is assumed to be a cantilever beam. The beam's large elastic deformation is obtained under an externally magnetic field. Specially, the rotation angle of the pillar's end is predicted, which shows an essential effect on the changeable adhesion of the micropillar arrayed surface. The larger the strength of the applied magnetic field, the larger the rotation angle of the pillar's end will be, yielding a decreasing adhesion force of the micropillar arrayed surface. The difference of adhesion force tuned by the applied magnetic field can be a few orders of magnitude, which leads to controllable adhesion of such a micropillar arrayed surface. Influences of each pillar's cross section shape, size, intervals between neighboring pillars, and the distribution pattern on the adhesion force are further analyzed. The theoretical predictions are qualitatively well consistent with the experimental measurements. The present theoretical results should be helpful not only for the understanding of mechanical mechanism of tunable adhesion of micropillar arrayed surface under a magnetic field but also for further precise and optimal design of such an adhesion-controllable bio-inspired surface in future practical applications.

scholarly journals Synthesis and Characterization of Highly Efficient Oil-Water Separation, Recyclable, Magnetic Particles CoFe2O4/SDB

2021 ◽  
Author(s):  
Cailin Liu ◽  
Li Yu ◽  
Yue Fan ◽  
Chang Li ◽  
Xianyan Ren ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Magnetic Particles ◽  
In Situ Polymerization ◽  
Solid Phase ◽  
Sol Gel ◽  
Water Separation ◽  
Practical Applications ◽  
Oil Water Separation ◽  
Oil Water

Abstract In the oil-water separation, the difficulty to recover and low hydrophobicity are key limitation factors for practical applications. In this paper, we design Cobalt ferrite hybird Polystyrene divinylbenzene microspheres (CoFe2O4/SDB), which were conducted through in-situ suspension copolymerization. The CoFe2O4 is prepared by low heat solid phase sol-gel method. It had been found that the CoFe2O4/SDB have a spherical structure, good adsorption behavior, highly hydrophobicity and even superhydrophobicity. The adsorption capacity of CoFe2O4/SDB composites could absorb kerosene up to 6 times of its own weight. Interestingly, kerosene can be easily separated from the surface of CoFe2O4/SDB particles with ultrasonic operation. CoFe2O4/SDB particles can still maintain good hydrophobicity and adsorption capacity of kerosene after 11 cycles after drying. With in situ polymerization of St、DVB and CoFe2O4, CoFe2O4/SDB as a promising absorbent of kerosene which has great potential in application of oil-water separation.

scholarly journals Синтез и магнитные свойства наночастиц Fe-=SUB=-3-=/SUB=-O-=SUB=-4-=/SUB=-/CoFe-=SUB=-2-=/SUB=-O-=SUB=-4-=/SUB=- со структурой ядро/оболочка

2020 ◽  
Vol 62 (2) ◽  
pp. 235
Author(s):  
Д.А. Балаев ◽  
С.В. Семенов ◽  
А.А. Дубровский ◽  
А.А. Красиков ◽  
С.И. Попков ◽  
...  
Keyword(s):  
Single Phase ◽  
Hybrid Particles ◽  
Soft Magnetic ◽  
Cofe2o4 Nanoparticles ◽  
The Core ◽  
Core Shell Structure ◽  
Magnetically Hard ◽  
Co Precipitation ◽  
Average Size ◽  
Magnetic Fe3o4

Fe3O4 / CoFe2O4 nanoparticles with a core-shell structure with an average size of 5 nm were obtained by co-precipitation from solutions of iron and cobalt chlorides. An analysis of the magnetic properties of the resulting system and their comparison with the data for single-phase Fe3O4 (4 nm) and CoFe2O4 (6 nm) nanoparticles led to the conclusion that there is a noticeable interaction between the soft magnetic (Fe3O4) and magnetically hard (CoFe2O4) phases that form the core and the shell of hybrid particles, correspondingly.

scholarly journals Enhanced Magnetic Properties of Co-Doped BiFeO3 Thin Films via Structural Progression

Nanomaterials ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 1798
Author(s):  
Liang Bai ◽  
Mingjie Sun ◽  
Wenjing Ma ◽  
Jinghai Yang ◽  
Junkai Zhang ◽  
...  
Keyword(s):  
Thin Films ◽  
Magnetic Properties ◽  
Sol Gel ◽  
Sem Images ◽  
Size Mismatch ◽  
Structural Progression ◽  
Gel Technique ◽  
Average Size ◽  
Perovskite Lattice ◽  
Co Doped

Co3+ doping in BiFeO3 is expected to be an effective method for improving its magnetic properties. In this work, pristine BiFeO3 (BFO) and doped BiFe1-xCoxO3 (BFCxO, x = 0.01, 0.03, 0.05, 0.07 and 0.10) composite thin films were successfully synthesized by a sol–gel technique. XRD and Raman spectra indicate that the Co3+ ions are substituted for the Fe3+ ion sites in the BFO rhombohedral lattice. Raman vibration of oxygen octahedron is obviously weakened due to the lattice distortion induced by the size mismatch between two B-site cations (Fe3+ and Co3+ ions), which has an impact on the magnetic properties of BFCxO. SEM images reveal a denser agglomeration in Co-doped samples. TEM results indicate that the average size of grains is reduced due to the Co3+ substitution. XPS measurements illustrate that the replacement of Fe3+ with Co3+ effectively suppresses the generation of oxygen defects and increases the concentration of Fe3+ ions at the B-site of perovskite lattice. Vibrating sample magnetometer (VSM) measurements show that the remanent magnetization (Mr) of BFC0.07O (3.6 emu/cm3) and the saturation magnetization (Ms) of BFC0.10O (48.84 emu/cm3) thin film both increase by approximately two times at room temperature, compared with that of the pure BFO counterpart.

Large polarization and dielectric response in epitaxial SrZrO3 films

2016 ◽  
Vol 18 (11) ◽  
pp. 7680-7687 ◽  
Author(s):  
Hao Tian ◽  
Ai-Jie Mao ◽  
Hong Jian Zhao ◽  
Yingqi Cui ◽  
Hui Li ◽  
...  
Keyword(s):  
Thin Films ◽  
Dielectric Properties ◽  
First Principles ◽  
Dielectric Response ◽  
Misfit Strain ◽  
First Principles Calculations

First-principles calculations are performed to investigate the ferroelectric and dielectric properties of (001) epitaxial SrZrO3 thin films under misfit strain.

Microstructure Of Fe-Nd-B Alloys Tailored To Approach Theoretical Coercrvtty Limits

1999 ◽  
Vol 5 (S2) ◽  
pp. 26-27
Author(s):  
Kannan M. Krishnan ◽  
Er. Girt ◽  
E. C. Nelson ◽  
G. Thomas ◽  
Ferdinand Hofer
Keyword(s):  
Magnetic Particles ◽  
Permanent Magnets ◽  
Spontaneous Magnetization ◽  
Particle Interaction ◽  
Maximum Energy ◽  
Interacting Particles ◽  
Maximum Energy Product ◽  
Energy Product ◽  
Oriented Samples ◽  
The Difference

Performance of permanent magnets for a variety of applications is often determined by the maximum energy product (BH)max. In order to obtain high (BH)max permanent magnetic materials have to have large coercivity. In theory the coercive field of ideally oriented, non-interacting, single domain, magnetic particles, assuming Kl is much bigger than K2, was shown to be He = 2K1/Ms - N Ms, where Kl and K2 are the magnetocrystalline anisotropy constants, Ms is the spontaneous magnetization and N is the demagnetization factor. For randomly oriented non-interacting particles the Stoner-Wohlfarth model predicts that the value of Hc decreases to about half. However, experimentally obtained values of the coercitive fields in permanent magnets are 3 to 10 and 2 times smaller for well oriented and randomly oriented samples, respectively. This discrepancy was attributed to inter-particle interaction and the microstructure of the permanent magnets. In order to understand the difference between the theoretically predicted and experimentally obtained results for He we prepared rapidly quenched, Nd-rich, NdxFe14B (2 < x < 150) ribbons.

scholarly journals Synthesis Features of Iron Oxide Nanopowders with High Magnetic and Sorption Properties

2018 ◽  
Vol 915 ◽  
pp. 116-120
Author(s):  
Sergiy Lavrynenko ◽  
Athanasios G. Mamalis ◽  
Dmitry Sofronov ◽  
Alexandra Odnovolova ◽  
Vadym Starikov
Keyword(s):  
Phase Composition ◽  
Magnetic Particles ◽  
Deposition Process ◽  
Spherical Particles ◽  
Sorptive Capacity ◽  
Extraction Separation ◽  
Average Size ◽  
Increasing Temperature ◽  
Magnetite Phase ◽  
Purification Of Water

The magnetic particles of iron oxides are promising materials for the purification of water from ions of heavy metals and radionuclides. Their advantage compared to other sorbents is the ability to extract by applied magnetic field, which greatly simplifies the task of extraction, separation and processing in cleaning technologies. The aim of this work is investigation of temperature and concentration of iron in the solution effect on the phase composition, nanoparticle size and their magnetization. Phase magnetite in the sample increases with increasing temperature and the magnetization decreases slightly with increasing the initial concentration of iron in solution. We found that regardless of the conditions of deposition formed spherical particles whose average size ranges from 7 to 15 nm. The sorptive capacity of the particles is virtually independent of the phase composition and for cobalt is about 18 mg/g. For sorption-based material magnetic particles Fe3O4 recommended to carry out the deposition process at a temperature not lower than 80°C. The concentration of iron in solution must be within 0,15–0,3M. The particles obtained contain in their composition at least 90 wt.% of magnetite phase and are characterized by a magnetization in the range of 65–70 A·m2/kg. Also in the paper is comparing efficiency of extraction and sorption capacity for cobalt particles by different phase of magnetite and hematite.

Sign in / Sign up

Export Citation Format

Share Document