scholarly journals Catalytic Polymerization of Phthalonitrile Resins by Carborane with Enhanced Thermal Oxidation Resistance: Experimental and Molecular Simulation

Polymers ◽  
2022 ◽  
Vol 14 (1) ◽  
pp. 219
Author(s):  
Yuxiang Jia ◽  
Xiaojun Bu ◽  
Junyu Dong ◽  
Quan Zhou ◽  
Min Liu ◽  
...  
Keyword(s):  
Low Temperature ◽  
Oxidation Resistance ◽  
High Performance ◽  
Steric Structure ◽  
Theoretical Models ◽  
Curing Temperature ◽  
Polymerization Process ◽  
National Defense ◽  
Oxidative Resistance ◽  
Markovnikov Addition

Biphenyl phthalonitrile (BPh) resins with good thermal and thermo-oxidative stability demonstrate great application potential in aerospace and national defense industries. However, BPh monomer has a high melting point, poor solubility, slow curing speed and high curing temperature. It is difficult to control the polymerization process to obtain the resins with high performance. Here, a BPh prepolymer (BPh-Q) was prepared by reacting 1,7-bis(hydroxymethyl)-m-carborane (QCB) with BPh monomers. The BPh-Q exhibited much better solubility, faster curing speed and lower curing temperature compared with pure BPh and BPh modified with bisphenol A (BPh-B, a common prepolymer of BPh). Thus, the polymerization process of BPh was greatly accelerated at a low temperature, resulting in a BPh resin with enhanced thermostability and oxidation resistance. The experimental and theoretical models revealed the promotion effect of B-H bond on the curing reaction of phthalonitrile via Markovnikov addition reaction due to the special steric structure of carborane. This study provided an efficient method to obtain low-temperature curing phthalonitrile resins with high thermal and thermo-oxidative resistance, which would be potentially useful for the preparation of high-performance cyanide resin-based composites.

Evaluation of thermo-mechanical, dielectric and corrosion resistant properties of cardanol benzoxazine-epoxy based hybrid composites: A very low temperature curing pre-polymer for high performance paint related applications

2019 ◽  
Vol 32 (5) ◽  
pp. 524-539 ◽  
Author(s):  
V Selvaraj ◽  
TR Raghavarshini ◽  
M Alagar
Keyword(s):  
Thermal Stability ◽  
Low Temperature ◽  
High Performance ◽  
Hybrid Composites ◽  
Industrial Applications ◽  
Curing Temperature ◽  
Polymerization Temperature ◽  
Corrosion Resistant ◽  
The Matrix ◽  
Ep Matrix

In the present work, the hybrid siloxane-based cardanol-benzoxazine-epoxy (1:1 ratio) matrix (SBCBz-EP) capable of curing at substantially low temperature when compared with that of conventional benzoxazines was prepared and characterized. The matrix SBCBz-EP was reinforced with varying weight percentages (1, 3 and 5 wt%) of hydroxyl-terminated cyclotriphosphazene (HTCP) and the resulting hybrid composites were characterized by modern analytical methods, which can be used for paint-related applications due to their low-temperature curing behaviour. Data obtained from differential scanning calorimeter analysis infer that the glass transition temperature of the hybrid matrix (SBCBz-EP) and HTCP reinforced with 1, 3 and 5 wt% composites was 73°C, 75°C, 82°C, and 88°C, respectively. The polymerization temperature obtained for SBCBz-EP matrix and HTCP-reinforced hybrid composites was considerably lower than that of conventional benzoxazines. The present hybridization approach of benzoxazine and epoxy paves an avenue to alleviate the deficient characteristics of both industrially valuable resins namely high curing temperature and brittle behaviour of benzoxazines and also to improve thermal stability, mechanical strength and flame-retardant behaviour of epoxy resins. Data obtained from mechanical, dielectric, thermal stability and corrosion-resistant studies indicate that the properties of hybrid composites (HTCP/SBCBZ-EP) were enhanced to an appreciable extent according to the wt% of HTCP and it can be suggested that these hybrid composite materials can be used in the form of adhesives, sealants, encapsulants and water-resistant coatings for high performance industrial applications.

scholarly journals Compressive Strength Gain Behavior and Prediction of Cement-Stabilized Macadam at Low Temperature Curing

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Yongli Xu ◽  
Guang Yang ◽  
Hongyuan Zhao
Keyword(s):  
Compressive Strength ◽  
Low Temperature ◽  
Curing Temperature ◽  
Strength Development ◽  
Construction Process ◽  
Strength Gain ◽  
Estimation Model ◽  
Maturity Method ◽  
Temperature Ranges ◽  
Natural Temperature

For cement-based materials, the curing temperature determines the strength gain rate and the value of compressive strength. In this paper, the 5% cement-stabilized macadam mixture is used. Three indoor controlled temperature curing and one outdoor natural curing scenarios are designed and implemented to study the strength development scenario law of compressive strength, and they are standard temperature curing (20°C), constant low temperature curing (10°C), day interaction temperature curing (varying from 6°C to 16°C), and one outdoor natural temperature curing (in which the air temperature ranges from 4°C to 20°C). Finally, based on the maturity method, the maturity-strength estimation model is obtained by using and analyzing the data collected from the indoor tests. The model is proved with high accuracy based on the validated results obtained from the data of outdoor tests. This research provides technical support for the construction of cement-stabilized macadam in regions with low temperature, which is beneficial in the construction process and quality control.

Ultra-High Temperature Ceramics (UHTCs) via Reactive Sintering

2007 ◽  
Vol 336-338 ◽  
pp. 1159-1163 ◽  
Author(s):  
Guo Jun Zhang ◽  
Wen Wen Wu ◽  
Yan Mei Kan ◽  
Pei Ling Wang
Keyword(s):  
Phase Composition ◽  
High Temperature ◽  
Oxidation Resistance ◽  
High Performance ◽  
Thermal Protection ◽  
Ambient Pressure ◽  
Stable Phase ◽  
Reactive Sintering ◽  
Dissociation Temperature ◽  
Monolithic Ceramics

Current high temperature ceramics, such as ZrO2, Si3N4 and SiC, cannot be used at temperatures over 1600°C due to their low melting temperature or dissociation temperature. For ultrahigh temperature applications over 1800°C, materials with high melting points, high phase composition stability, high thermal conductivity, good thermal shock and oxidation resistance are needed. The transition metal diborides, mainly include ZrB2 and HfB2, have melting temperatures of above 3000°C, and can basically meet the above demands. However, the oxidation resistance of diboride monolithic ceramics at ultra-high temperatures need to be improved for the applications in thermal protection systems for future aerospace vehicles and jet engines. On the other hand, processing science for making high performance UHTCs is another hot topic in the UHTC field. Densification of UHTCs at mild temperatures through reactive sintering is an attracting way due to the chemically stable phase composition and microstructure as well as clean grain boundaries in the obtained materials. Moreover, the stability studies of the materials in phase composition and microstructures at ultra high application temperatures is also critical for materials manufactured at relatively low temperature. Furthermore, the oxidation resistance in simulated reentry environments instead of in static or flowing air of ambient pressure should be evaluated. Here we will report the concept, advantages and some recent progress on the reactive sintering of diboride–based composites at mild temperatures.

scholarly journals RELaTED Project: New Developments on Ultra-Low Temperature District Heating Networks

Proceedings ◽  
2020 ◽  
Vol 65 (1) ◽  
pp. 25
Author(s):  
Antonio Garrido Marijuan ◽  
Roberto Garay ◽  
Mikel Lumbreras ◽  
Víctor Sánchez ◽  
Olga Macias ◽  
...  
Keyword(s):  
Low Temperature ◽  
High Performance ◽  
Waste Heat ◽  
District Heating ◽  
Hot Water ◽  
Thermal Systems ◽  
Heating Source ◽  
Wide Range ◽  
Thermal Sources ◽  
Heating Networks

District heating networks deliver around 13% of the heating energy in the EU, being considered as a key element of the progressive decarbonization of Europe. The H2020 REnewable Low TEmperature District project (RELaTED) seeks to contribute to the energy decarbonization of these infrastructures through the development and demonstration of the following concepts: reduction in network temperature down to 50 °C, integration of renewable energies and waste heat sources with a novel substation concept, and improvement on building-integrated solar thermal systems. The coupling of renewable thermal sources with ultra-low temperature district heating (DH) allows for a bidirectional energy flow, using the DH as both thermal storage in periods of production surplus and a back-up heating source during consumption peaks. The ultra-low temperature enables the integration of a wide range of energy sources such as waste heat from industry. Furthermore, RELaTED also develops concepts concerning district heating-connected reversible heat pump systems that allow to reach adequate thermal levels for domestic hot water as well as the use of the network for district cooling with high performance. These developments will be demonstrated in four locations: Estonia, Serbia, Denmark, and Spain.

scholarly journals Silver‐Promoted High‐Performance (Ag,Cu)(In,Ga)Se 2 Thin‐Film Solar Cells Grown at Very Low Temperature

Solar RRL ◽  
2021 ◽  
pp. 2100108
Author(s):  
Shih-Chi Yang ◽  
Jordi Sastre ◽  
Maximilian Krause ◽  
Xiaoxiao Sun ◽  
Ramis Hertwig ◽  
...  
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
Low Temperature ◽  
High Performance ◽  
Thin Film Solar Cells ◽  
Very Low Temperature

scholarly journals Nanonet: Low-temperature-processed tellurium nanowire network for scalable p-type field-effect transistors and a highly sensitive phototransistor array

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Muhammad Naqi ◽  
Kyung Hwan Choi ◽  
Hocheon Yoo ◽  
Sudong Chae ◽  
Bum Jun Kim ◽  
...  
Keyword(s):  
Low Temperature ◽  
Field Effect ◽  
High Performance ◽  
Field Effect Transistors ◽  
Optical Measurements ◽  
Electrical Performance ◽  
Large Area ◽  
Nanowire Network ◽  
P Type ◽  
Nanowire Networks

AbstractLow-temperature-processed semiconductors are an emerging need for next-generation scalable electronics, and these semiconductors need to feature large-area fabrication, solution processability, high electrical performance, and wide spectral optical absorption properties. Although various strategies of low-temperature-processed n-type semiconductors have been achieved, the development of high-performance p-type semiconductors at low temperature is still limited. Here, we report a unique low-temperature-processed method to synthesize tellurium nanowire networks (Te-nanonets) over a scalable area for the fabrication of high-performance large-area p-type field-effect transistors (FETs) with uniform and stable electrical and optical properties. Maximum mobility of 4.7 cm2/Vs, an on/off current ratio of 1 × 104, and a maximum transconductance of 2.18 µS are achieved. To further demonstrate the applicability of the proposed semiconductor, the electrical performance of a Te-nanonet-based transistor array of 42 devices is also measured, revealing stable and uniform results. Finally, to broaden the applicability of p-type Te-nanonet-based FETs, optical measurements are demonstrated over a wide spectral range, revealing an exceptionally uniform optical performance.

Ionic liquid-induced low temperature graphitization of cellulose-derived biochar for high performance sodium storage

2021 ◽  
Vol 412 ◽  
pp. 127034
Author(s):  
Yang Yu ◽  
Zhuoya Ren ◽  
Qianqian Shang ◽  
Jiangang Han ◽  
Lei Li ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Low Temperature ◽  
High Performance ◽  
Sodium Storage

scholarly journals Elucidation of the Crystal Growth Characteristics of SnO2 Nanoaggregates Formed by Sequential Low-Temperature Sol-Gel Reaction and Freeze Drying

Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1738
Author(s):  
Saeid Vafaei ◽  
Alexander Wolosz ◽  
Catlin Ethridge ◽  
Udo Schnupf ◽  
Nagisa Hattori ◽  
...  
Keyword(s):  
Crystal Growth ◽  
Low Temperature ◽  
Photoelectron Spectroscopy ◽  
High Performance ◽  
Freeze Drying ◽  
Sno2 Nanoparticles ◽  
Sol Gel ◽  
Functional Materials ◽  
Cost Effective ◽  
High Concentration

SnO2 nanoparticles are regarded as attractive, functional materials because of their versatile applications. SnO2 nanoaggregates with single-nanometer-scale lumpy surfaces provide opportunities to enhance hetero-material interfacial areas, leading to the performance improvement of materials and devices. For the first time, we demonstrate that SnO2 nanoaggregates with oxygen vacancies can be produced by a simple, low-temperature sol-gel approach combined with freeze-drying. We characterize the initiation of the low-temperature crystal growth of the obtained SnO2 nanoaggregates using high-resolution transmission electron microscopy (HRTEM). The results indicate that Sn (II) hydroxide precursors are converted into submicrometer-scale nanoaggregates consisting of uniform SnO2 spherical nanocrystals (2~5 nm in size). As the sol-gel reaction time increases, further crystallization is observed through the neighboring particles in a confined part of the aggregates, while the specific surface areas of the SnO2 samples increase concomitantly. In addition, X-ray photoelectron spectroscopy (XPS) measurements suggest that Sn (II) ions exist in the SnO2 samples when the reactions are stopped after a short time or when a relatively high concentration of Sn (II) is involved in the corresponding sol-gel reactions. Understanding this low-temperature growth of 3D SnO2 will provide new avenues for developing and producing high-performance, photofunctional nanomaterials via a cost-effective and scalable method.

Sign in / Sign up

Export Citation Format

Share Document