scholarly journals Dielectric Properties of Lunar Materials at the Chang’e-4 Landing Site

2021 ◽  
Vol 13 (20) ◽  
pp. 4056
Author(s):  
Jialong Lai ◽  
Feifei Cui ◽  
Yi Xu ◽  
Chaofei Liu ◽  
Ling Zhang
Keyword(s):  
Dielectric Properties ◽  
Loss Tangent ◽  
Estimation Method ◽  
Landing Site ◽  
Coarse Grained ◽  
Fdtd Simulation ◽  
Motion Path ◽  
Soft Landing ◽  
Fine Grained ◽  
Exploration Area

On January 3rd 2019, the Chang’e-4 mission successfully landed in the Von Kármán Crater inside the South Pole-Aitken (SPA) basin and achieved the first soft landing on the farside of the Moon. Lunar penetrating radar (LPR) equipped on the rover measured the shallow subsurface structure along the motion path for more than 700 m. LPR data could be used to obtain the dielectric properties of the materials beneath the exploration area, providing important clues as to the composition and source of the materials. Although the properties of the upper fine-grained regolith have been studied using various methods, the underlying coarse-grained materials still lack investigation. Therefore, this paper intends to estimate the loss tangent of the coarse-grained materials at depth ranges of ~12 and ~28 m. Stochastic media models with different rock distributions for the LPR finite-difference time-domain (FDTD) simulation are built to evaluate the feasibility of the estimation method. Our results show that the average loss tangent value of coarse-grained materials is 0.0104±0.0027, and the abundance of FeOT+TiO2 is 20.08 wt.%, which is much higher than the overlying fine-grained regolith, indicating different sources.

Effect of grain size and mechanical processing on the dielectric properties of BaTiO3

1995 ◽  
Vol 10 (6) ◽  
pp. 1418-1423 ◽  
Author(s):  
B.W. Lee ◽  
K.H. Auh
Keyword(s):  
Dielectric Constant ◽  
Grain Size ◽  
Dielectric Properties ◽  
Domain Switching ◽  
External Pressure ◽  
Coarse Grained ◽  
One Dimensional ◽  
Fine Grained ◽  
Average Grain Size ◽  
Coarse Grained Material

Dielectric properties of polycrystalline BaTiO3 ceramics having grain sizes of 1 to 40 μm have been studied. Fine-grained ceramic BaTiO3 of 1 μm average grain size has 90°domains and has shown higher dielectric constant, lower ferroelectric transition temperature (Tc), and lower transition energy than coarser-grained material. 90°domain switching was preferentially produced in the fine-grained BaTiO3 as a result of abrasion. For the fine-grained BaTiO3, the dielectric constant decreased with one-dimensional pressure, whereas, for the coarse-grained material, the dielectric constant increased before decreasing with the pressure. The one-dimensional pressure resulted in increased Tc of both the fine- and coarse-grained BaTiO3, with the effect being the greatest for the coarse-grained material. The relationship between these results and internal stress, and the effect of external pressure imposed on internally stressed lattice, were discussed.

scholarly journals Elucidating Pathfinding Elements from the Kubi Gold Mine in Ghana

Minerals ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 912
Author(s):  
Gabriel K. Nzulu ◽  
Babak Bakhit ◽  
Hans Högberg ◽  
Lars Hultman ◽  
Martin Magnuson
Keyword(s):  
Photoelectron Spectroscopy ◽  
Chemical Weathering ◽  
Gold Mining ◽  
Coarse Grained ◽  
Small Scale ◽  
X Ray ◽  
Mining Sites ◽  
Fine Grained ◽  
Exploration Area ◽  
Indicator Minerals

X-ray photoelectron spectroscopy (XPS) and energy dispersive X-ray spectroscopy (EDX) are applied to investigate the properties of fine-grained concentrates on artisanal, small-scale gold mining samples from the Kubi Gold Project of the Asante Gold Corporation near Dunwka-on-Offin in the Central Region of Ghana. Both techniques show that the Au-containing residual sediments are dominated by the host elements Fe, Ag, Al, N, O, Si, Hg, and Ti that either form alloys with gold or with inherent elements in the sediments. For comparison, a bulk nugget sample mainly consisting of Au forms an electrum, i.e., a solid solution with Ag. Untreated (impure) sediments, fine-grained Au concentrate, coarse-grained Au concentrate, and processed ore (Au bulk/nugget) samples were found to contain clusters of O, C, N, and Ag, with Au concentrations significantly lower than that of the related elements. This finding can be attributed to primary geochemical dispersion, which evolved from the crystallization of magma and hydrothermal liquids as well as the migration of metasomatic elements and the rapid rate of chemical weathering of lateralization in secondary processes. The results indicate that Si and Ag are strongly concomitant with Au because of their eutectic characteristics, while N, C, and O follow alongside because of their affinity to Si. These non-noble elements thus act as pathfinders for Au ores in the exploration area. This paper further discusses relationships between gold and sediments of auriferous lodes as key to determining indicator minerals of gold in mining sites.

Correlation between dislocation, grain boundary and interface of duplex SS in stress corrosion cracking(SCC)

1990 ◽  
Vol 48 (4) ◽  
pp. 928-929
Author(s):  
Wang Zheng-fang ◽  
Z.F. Wang
Keyword(s):  
Stainless Steel ◽  
Thermal Cycle ◽  
Secondary Phase ◽  
Corrosion Cracking ◽  
Coarse Grained ◽  
Test Environment ◽  
Fine Grained ◽  
Evaluation Test ◽  
Welding Thermal Cycle ◽  
Micro Analysis

The main purpose of this study highlights on the evaluation of chloride SCC resistance of the material,duplex stainless steel,OOCr18Ni5Mo3Si2 (18-5Mo) and its welded coarse grained zone(CGZ).18-5Mo is a dual phases (A+F) stainless steel with yield strength:512N/mm2 .The proportion of secondary Phase(A phase) accounts for 30-35% of the total with fine grained and homogeneously distributed A and F phases(Fig.1).After being welded by a specific welding thermal cycle to the material,i.e. Tmax=1350°C and t8/5=20s,microstructure may change from fine grained morphology to coarse grained morphology and from homogeneously distributed of A phase to a concentration of A phase(Fig.2).Meanwhile,the proportion of A phase reduced from 35% to 5-10°o.For this reason it is known as welded coarse grained zone(CGZ).In association with difference of microstructure between base metal and welded CGZ,so chloride SCC resistance also differ from each other.Test procedures:Constant load tensile test(CLTT) were performed for recording Esce-t curve by which corrosion cracking growth can be described, tf,fractured time,can also be recorded by the test which is taken as a electrochemical behavior and mechanical property for SCC resistance evaluation. Test environment:143°C boiling 42%MgCl2 solution is used.Besides, micro analysis were conducted with light microscopy(LM),SEM,TEM,and Auger energy spectrum(AES) so as to reveal the correlation between the data generated by the CLTT results and micro analysis.

scholarly journals The Primary Origin of Excellent Dielectric Properties of (Co, Nb) Co-Doped TiO2 Ceramics: Electron-Pinned Defect Dipoles vs. Internal Barrier Layer Capacitor Effect

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3230
Author(s):  
Theeranuch Nachaithong ◽  
Narong Chanlek ◽  
Pairot Moontragoon ◽  
Prasit Thongbai
Keyword(s):  
Dielectric Properties ◽  
Loss Tangent ◽  
Barrier Layer ◽  
Dielectric Response ◽  
High Resistivity ◽  
Low Loss ◽  
Rutile Tio2 ◽  
Complex Defect ◽  
Very High ◽  
Co Doped

(Co, Nb) co-doped rutile TiO2 (CoNTO) nanoparticles with low dopant concentrations were prepared using a wet chemistry method. A pure rutile TiO2 phase with a dense microstructure and homogeneous dispersion of the dopants was obtained. By co-doping rutile TiO2 with 0.5 at.% (Co, Nb), a very high dielectric permittivity of ε′ » 36,105 and a low loss tangent of tanδ » 0.04 were achieved. The sample–electrode contact and resistive outer-surface layer (surface barrier layer capacitor) have a significant impact on the dielectric response in the CoNTO ceramics. The density functional theory calculation shows that the 2Co atoms are located near the oxygen vacancy, creating a triangle-shaped 2CoVoTi complex defect. On the other hand, the substitution of TiO2 with Nb atoms can form a diamond-shaped 2Nb2Ti complex defect. These two types of complex defects are far away from each other. Therefore, the electron-pinned defect dipoles cannot be considered the primary origins of the dielectric response in the CoNTO ceramics. Impedance spectroscopy shows that the CoNTO ceramics are electrically heterogeneous, comprised of insulating and semiconducting regions. Thus, the dielectric properties of the CoNTO ceramics are attributed to the interfacial polarization at the internal insulating layers with very high resistivity, giving rise to a low loss tangent.

scholarly journals Balanced Sparsity for Efficient DNN Inference on GPU

2019 ◽  
Vol 33 ◽  
pp. 5676-5683 ◽  
Author(s):  
Zhuliang Yao ◽  
Shijie Cao ◽  
Wencong Xiao ◽  
Chen Zhang ◽  
Lanshun Nie
Keyword(s):  
Deep Neural Networks ◽  
General Purpose ◽  
Coarse Grained ◽  
Efficient Computation ◽  
Model Accuracy ◽  
Sparse Model ◽  
Model Inference ◽  
Fine Grained ◽  
Practical Inference ◽  
Speed Up

In trained deep neural networks, unstructured pruning can reduce redundant weights to lower storage cost. However, it requires the customization of hardwares to speed up practical inference. Another trend accelerates sparse model inference on general-purpose hardwares by adopting coarse-grained sparsity to prune or regularize consecutive weights for efficient computation. But this method often sacrifices model accuracy. In this paper, we propose a novel fine-grained sparsity approach, Balanced Sparsity, to achieve high model accuracy with commercial hardwares efficiently. Our approach adapts to high parallelism property of GPU, showing incredible potential for sparsity in the widely deployment of deep learning services. Experiment results show that Balanced Sparsity achieves up to 3.1x practical speedup for model inference on GPU, while retains the same high model accuracy as finegrained sparsity.

scholarly journals Submarine lava deltas of the 2018 eruption of Kīlauea volcano

2021 ◽  
Vol 83 (4) ◽  
Author(s):  
S. Adam Soule ◽  
Michael Zoeller ◽  
Carolyn Parcheta
Keyword(s):  
Grain Size ◽  
Pore Pressure ◽  
Mechanistic Model ◽  
Large Fraction ◽  
Volcanic Hazards ◽  
Lava Flows ◽  
Coarse Grained ◽  
Fine Grained ◽  
Fine Grain ◽  
Delta Formation

AbstractHawaiian and other ocean island lava flows that reach the coastline can deposit significant volumes of lava in submarine deltas. The catastrophic collapse of these deltas represents one of the most significant, but least predictable, volcanic hazards at ocean islands. The volume of lava deposited below sea level in delta-forming eruptions and the mechanisms of delta construction and destruction are rarely documented. Here, we report on bathymetric surveys and ROV observations following the Kīlauea 2018 eruption that, along with a comparison to the deltas formed at Pu‘u ‘Ō‘ō over the past decade, provide new insight into delta formation. Bathymetric differencing reveals that the 2018 deltas contain more than half of the total volume of lava erupted. In addition, we find that the 2018 deltas are comprised largely of coarse-grained volcanic breccias and intact lava flows, which contrast with those at Pu‘u ‘Ō‘ō that contain a large fraction of fine-grained hyaloclastite. We attribute this difference to less efficient fragmentation of the 2018 ‘a‘ā flows leading to fragmentation by collapse rather than hydrovolcanic explosion. We suggest a mechanistic model where the characteristic grain size influences the form and stability of the delta with fine grain size deltas (Pu‘u ‘Ō‘ō) experiencing larger landslides with greater run-out supported by increased pore pressure and with coarse grain size deltas (Kīlauea 2018) experiencing smaller landslides that quickly stop as the pore pressure rapidly dissipates. This difference, if validated for other lava deltas, would provide a means to assess potential delta stability in future eruptions.

scholarly journals A cooperative DDoS attack detection scheme based on entropy and ensemble learning in SDN

2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Shanshan Yu ◽  
Jicheng Zhang ◽  
Ju Liu ◽  
Xiaoqing Zhang ◽  
Yafeng Li ◽  
...  
Keyword(s):  
Ensemble Learning ◽  
Denial Of Service ◽  
Attack Detection ◽  
Coarse Grained ◽  
Communication Overhead ◽  
Detection Scheme ◽  
Fine Grained ◽  
Ddos Attack ◽  
Network Status ◽  
Ddos Attack Detection

AbstractIn order to solve the problem of distributed denial of service (DDoS) attack detection in software-defined network, we proposed a cooperative DDoS attack detection scheme based on entropy and ensemble learning. This method sets up a coarse-grained preliminary detection module based on entropy in the edge switch to monitor the network status in real time and report to the controller if any abnormality is found. Simultaneously, a fine-grained precise attack detection module is designed in the controller, and a ensemble learning-based algorithm is utilized to further identify abnormal traffic accurately. In this framework, the idle computing capability of edge switches is fully utilized with the design idea of edge computing to offload part of the detection task from the control plane to the data plane innovatively. Simulation results of two common DDoS attack methods, ICMP and SYN, show that the system can effectively detect DDoS attacks and greatly reduce the southbound communication overhead and the burden of the controller as well as the detection delay of the attacks.

Rheology of hydrocarbon gels

1950 ◽  
Vol 200 (1061) ◽  
pp. 183-188 ◽  
Keyword(s):  
Mechanical Properties ◽  
Experimental Measurement ◽  
Theoretical Basis ◽  
Continuous Media ◽  
Point Of View ◽  
Coarse Grained ◽  
Testing Instrument ◽  
Fine Grained ◽  
Mineral Oils ◽  
Space And Time

Hydrocarbon gels contain a number of materials, such as rubber, greases, saponified mineral oils, etc., of great interest for various engineering purposes. Specific requirements in mechanical properties have been met by producing gels in appropriately chosen patterns of constituent components of visible, colloidal, molecular and atomic sizes, ranging from coarse-grained aggregates, represented by sponges, foams, emulsions, etc.; to fine-grained and apparently homogeneous ones, represented by optically clear compounds. The engineer who has to deal with the whole range of such materials will adopt a macroscopic point of view, based on an apparent continuity of all the material structures and of the distributions in space and time of the displacements and forces occurring under mechanical actions. It has been possible to determine these distributions in the framework of a comprehensive scheme in which the fundamental principles of the mechanics of continuous media provide the theoretical basis, and a testing instrument of new design, termed Rheogoniometer, the means of experimental measurement (Weissenberg 1931, 1934, 1946, 1947, 1948).

Microstructural Refinement in a Commercial Aluminum Alloy Processed by ECAP Using a Die Channel Angle of 110 Degrees

2015 ◽  
Vol 1114 ◽  
pp. 3-8
Author(s):  
Nicolae Şerban ◽  
Doina Răducanu ◽  
Nicolae Ghiban ◽  
Vasile Dănuţ Cojocaru
Keyword(s):  
Grain Refinement ◽  
Cross Section ◽  
High Strength ◽  
Secondary Phase ◽  
Coarse Grained ◽  
Metallographic Analysis ◽  
Second Phase ◽  
Channel Angle ◽  
Ambient Temperatures ◽  
Fine Grained

The properties of ultra-fine grained materials are superior to those of corresponding conventional coarse grained materials, being significantly improved as a result of grain refinement. Equal channel angular pressing (ECAP) is an efficient method for modifying the microstructure by refining grain size via severe plastic deformation (SPD) in producing ultra-fine grained materials (UFG) and nanomaterials (NM). The grain sizes produced by ECAP processing are typically in the submicrometer range and this leads to high strength at ambient temperatures. ECAP is performed by pressing test samples through a die containing two channels, equal in cross-section and intersecting at a certain angle. The billet experiences simple shear deformation at the intersection, without any precipitous change in the cross-section area because the die prevents lateral expansion and therefore the billet can be pressed more than once and it can be rotated around its pressing axis during subsequent passes. After ECAP significant grain refinement occurs together with dislocation strengthening, resulting in a considerable enhancement in the strength of the alloys. A commercial AlMgSi alloy (AA6063) was investigated in this study. The specimens were processed for a number of passes up to nine, using a die channel angle of 110°, applying the ECAP route BC. After ECAP, samples were cut from each specimen and prepared for metallographic analysis. The microstructure of the ECAP-ed and as-received material was investigated using optical (OLYMPUS – BX60M) and SEM microscopy (TESCAN VEGA II – XMU). It was determined that for the as-received material the microstructure shows a rough appearance, with large grains of dendritic or seaweed aspect and with a secondary phase at grain boundaries (continuous casting structure). For the ECAP processed samples, the microstructure shows a finished aspect, with refined, elongated grains, also with crumbled and uniformly distributed second phase particles after a typical ECAP texture.

Conditional Belief and the Ramsey Test

2002 ◽  
Vol 51 ◽  
pp. 215-232
Author(s):  
Scott Sturgeon
Keyword(s):  
Everyday Life ◽  
Common Sense ◽  
The Other ◽  
Coarse Grained ◽  
Degrees Of Belief ◽  
Conditional Belief ◽  
Ramsey Test ◽  
Fine Grained

Consider the frameS believes that—.Fill it with a conditional, sayIf you eat an Apple, you'll drink a Coke.what makes the result true? More generally, what facts are marked by instances ofS believes (A→C)?In a sense the answer is obious: beliefs are so marked. Yet that bromide leads directly to competing schools of thought. And the reason is simple.Common-sense thinks of belief two ways. Sometimes it sees it as a three-part affair. When so viewed either you believe, disbelieve, or suspend judgment. This take on belief is coarse-grained. It says belief has three flavours: acceptance, rejection, neither. But it's not the only way common-sense thinks of belief. Sometimes it's more subtle: ‘How strong is your faith?’ can be apposite between believers. That signals an important fact. Ordinary practice also treats belief as a fine-grained affair. It speaks of levels of confidence. It admits degrees of belief. It contains a fine-grained take as well. There are two ways belief is seen in everyday life. One is coarse-grained. The other is fine-grained.

Sign in / Sign up

Export Citation Format

Share Document