scholarly journals Enhanced Adsorption Capacities of Fungicides Using Peanut Shell Biochar via Successive Chemical Modification with KMnO4 and KOH

Separations ◽  
2021 ◽  
Vol 8 (4) ◽  
pp. 52
Author(s):  
Yong-Gu Lee ◽  
Jaegwan Shin ◽  
Jinwoo Kwak ◽  
Sangwon Kim ◽  
Changgil Son ◽  
...  
Keyword(s):  
Chemical Modification ◽  
Peanut Shell ◽  
Batch Experiments ◽  
X Ray ◽  
Adsorption Mechanisms ◽  
Treatment Processes ◽  
Adsorption Capacities ◽  
Isotherms And Thermodynamics ◽  
Effects Of Temperature ◽  
Enhanced Adsorption

This study explored the effects of peanut shell biochar (PSB) on the adsorption capacities of fungicides with and without successive chemical modifications, using KMnO4 and KOH (PSBOX-A), in order to provide a valuable understanding of their adsorption mechanisms and behaviors. To this end, the physicochemical properties of PSB and PSBOX-A were examined by using the Brunauer–Emmett–Teller method, Fourier transform infrared spectroscopy, and scanning electron microscopy with an energy dispersive X-ray spectrometer. The effects of temperature, ionic strength, and humic acids on the adsorption of fungicides, using PSB and PSBOX-A, were estimated through batch experiments. Furthermore, adsorption kinetics, isotherms, and thermodynamics were studied. The maximum adsorption capacities of fungicides by PSBOX-A were estimated to be more notable (Qmax of carbendazim = 531.2 μmol g−1, Qmax of pyrimethanil = 467.7 μmol g−1, and Qmax of tebuconazole = 495.1 μmol g−1) than PSB (Qmax of carbendazim = 92.6 μmol g−1, Qmax of pyrimethanil = 61.7 μmol g−1, and Qmax of tebuconazole = 66.7 μmol g−1). These findings suggest that successive chemical modification using KMnO4 and KOH could potentially be used to effectively fabricate PSB to remove fungicides in water-treatment processes.

scholarly journals Bio-adsorbent preparation based on Chinese Radix isatidis residue for Pb(II) removal

2020 ◽  
Vol 15 (4) ◽  
pp. 1202-1212
Author(s):  
Yu-zhuo Shi ◽  
Xiao-chun Yin ◽  
Guang-hui Si ◽  
Na-di Zhang ◽  
Mei-xia Du ◽  
...  
Keyword(s):  
Herbal Medicine ◽  
Batch Experiments ◽  
Chinese Herbal ◽  
Radix Isatidis ◽  
Adsorption Capacities ◽  
Novel Approach ◽  
Enhanced Adsorption ◽  
Adsorption And Desorption Performance ◽  
Adsorption Desorption ◽  
Enormous Quantity

Abstract A series of bio-adsorbents with potential for Pb(II) removal from wastewater were prepared by treating Radix isatidis residue (RIR) with integrated chemical treatment and fermentation methods. Batch experiments were used to test the adsorption and desorption performance of different bio-adsorbents. The results showed that treated RIRs had significantly enhanced adsorption capacity of 23.5 and 27.6 mg g−1 for Pb(II) within 50 minutes, in contrast to the raw RIR's 12.2 mg g−1. RIR produced by modified chemical/fermentation treatment can remove up to 31.1 mg g−1. After five adsorption/desorption cycles, about 75% of the adsorption capacities were maintained. This study is a novel approach to reusing the enormous quantity of Chinese herbal medicine residues.

Removal performance of faecal indicators by natural and silver-modified zeolites under dynamic batch experiments

2021 ◽  
Author(s):  
Vasiliki I. Syngouna ◽  
Ioannis Skandalis ◽  
Apostolos Vantarakis
Keyword(s):  
Waste Water Treatment ◽  
Silver Ions ◽  
Antimicrobial Effect ◽  
Natural Zeolites ◽  
Indicator Organisms ◽  
Batch Experiments ◽  
X Ray ◽  
Adsorption Capacities ◽  
And Control ◽  
Faecal Indicators

<p>The use of natural zeolites (NZs) in waste-water treatment plants is one of the oldest and most promising applications.  Modified natural zeolites (MZs) have shown improved ion exchange and adsorption capacities and have been extensively applied for the removal of pollutants (metal(loid) ions, ammonia etc) from aqueous solutions. However, MZs application in biological pollutants such as indicator organisms or pathogens has not been extensively explored. This study examines the antimicrobial effect of both natural Greek zeolite (NZ), with clinoptilolite content up to 85% (OLYMPOS SA), and modified Greek zeolite by incorporation with silver ions (Ag-MNZ) on the survival of two selected bacteria. The chosen organisms, <em>Escherichia coli </em>and <em>Enterococcus faecalis</em>, constitute indicators of fecal contamination in both soils and water. Scanning electron microscopy and energy dispersive X-ray detection (SEM-EDX) were used for the surface morphology and elemental composition of the NZ and Ag-MNZ samples, respectively. A series of dynamic batch experiments were conducted at constant room temperature (22°C) in order to examine the inactivation of the above bacteria by NZ and Ag-MNZ.  It was found that the Ag-MNZ resulted in much higher reduction of the bacterial numbers when compared to the NZ and control (absence of zeolites). Moreover, the reduction in the bacterial numbers was affected by NZ particle size with higher reduction observed for coarse (1-3 mm) than fine (0-1) NZ. Finally, the<em> E. faecalis</em> was found to be more resistant than <em>E.coli </em>to Ag-MNZ.</p>

scholarly journals Combined Influence of Low-Grade Metakaolins and Natural Zeolite on Compressive Strength and Heavy Metal Adsorption of Geopolymers

Minerals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 486
Author(s):  
Alcina Johnson Sudagar ◽  
Slávka Andrejkovičová ◽  
Fernando Rocha ◽  
Carla Patinha ◽  
Maria R. Soares ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Compressive Strength ◽  
Natural Zeolite ◽  
Metal Adsorption ◽  
Low Grade ◽  
Heavy Metal Adsorption ◽  
Adsorption Model ◽  
X Ray ◽  
Adsorption Capacities

Metakaolins (MKs) prepared from low-grade kaolins located in the Alvarães (A) and Barqueiros (B) regions of Portugal were used as the aluminosilicate source to compare their effect on the compressive strength and heavy metal adsorption of geopolymers. Natural zeolite, an inexpensive, efficient adsorbent, was used as an additive in formulations to enhance geopolymers’ adsorption capacities and reduce MK utilization’s environmental footprint. Geopolymers were synthesized with the replacement of MK by zeolite up to 75 wt.% (A25, B25—25% MK 75% zeolite; A50, B50—50% MK 50% zeolite; A75, B75—75% MK 25% zeolite; A100, B100—100% MK). The molar ratios of SiO2/Al2O3 and Na2O/Al2O3 were kept at 1 to reduce the sodium silicate and sodium hydroxide environmental impact. Geopolymers’ crystallography was identified using X-ray diffraction analysis. The surface morphology was observed by scanning electron microscopy to understand the effect of zeolite incorporation. Chemical analysis using X-ray fluorescence spectroscopy and energy dispersive X-ray spectroscopy yielded information about the geopolymers’ Si/Al ratio. Compressive strength values of geopolymers obtained after 1, 14, and 28 days of curing indicate high strengths of geopolymers with 100% MK (A100—15.4 MPa; B100—32.46 MPa). Therefore, zeolite did not aid in the improvement of the compressive strength of both MK-based geopolymers. The heavy metal (Cd2+, Cr3+, Cu2+, Pb2+, and Zn2+) adsorption tests exhibit relatively higher adsorption capacities of Barqueiros MK-based geopolymers for all the heavy metals except Cd2+. Moreover, zeolite positively influenced divalent cations’ adsorption on the geopolymers produced from Barqueiros MK as B75 exhibits the highest adsorption capacities, but such an influence is not observed for Alvarães MK-based geopolymers. The general trend of adsorption of the heavy metals of both MK-based geopolymers is Pb2+ > Cd2+ > Cu2+ > Zn2+ > Cr3+ when fitted by the Langmuir isotherm adsorption model. The MK and zeolite characteristics influence geopolymers’ structure, strength, and adsorption capacities.

scholarly journals Preparation and Characterization of the Sulfur-Impregnated Natural Zeolite Clinoptilolite for Hg(II) Removal from Aqueous Solutions

Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 217
Author(s):  
Marin Ugrina ◽  
Martin Gaberšek ◽  
Aleksandra Daković ◽  
Ivona Nuić
Keyword(s):  
Chemical Modification ◽  
Aqueous Solutions ◽  
Specific Surface ◽  
Surface Area ◽  
Natural Zeolite ◽  
Contact Time ◽  
Liquid Ratio ◽  
X Ray ◽  
Solid Liquid

Sulfur-impregnated zeolite has been obtained from the natural zeolite clinoptilolite by chemical modification with Na2S at 150 °C. The purpose of zeolite impregnation was to enhance the sorption of Hg(II) from aqueous solutions. Chemical analysis, acid and basic properties determined by Bohem’s method, chemical behavior at different pHo values, zeta potential, cation-exchange capacity (CEC), specific surface area, X-ray powder diffraction (XRPD), scanning electron microscopy with energy-dispersive X-ray analysis (SEM-EDS), Fourier transform infrared spectroscopy (FTIR), as well as thermogravimetry with derivative thermogravimetry (TG-DTG) were used for detailed comparative mineralogical and physico-chemical characterization of natural and sulfur-impregnated zeolites. Results revealed that the surface of the natural zeolite was successfully impregnated with sulfur species in the form of FeS and CaS. Chemical modification caused an increase in basicity and the net negative surface charge due to an increase in oxygen-containing functional groups as well as a decrease in specific surface area and crystallinity due to the formation of sulfur-containing clusters at the zeolite surface. The sorption of Hg(II) species onto the sulfur-impregnated zeolite was affected by the pH, solid/liquid ratio, initial Hg(II) concentration, and contact time. The optimal sorption conditions were determined as pH 2, a solid/liquid ratio of 10 g/L, and a contact time of 800 min. The maximum obtained sorption capacity of the sulfur-impregnated zeolite toward Hg(II) was 1.02 mmol/g. The sorption mechanism of Hg(II) onto the sulfur-impregnated zeolite involves electrostatic attraction, ion exchange, and surface complexation, accompanied by co-precipitation of Hg(II) in the form of HgS. It was found that sulfur-impregnation enhanced the sorption of Hg(II) by 3.6 times compared to the natural zeolite. The leaching test indicated the retention of Hg(II) in the zeolite structure over a wide pH range, making this sulfur-impregnated sorbent a promising material for the remediation of a mercury-polluted environment.

scholarly journals Adsorptive Removal of Cd, Cu, Ni and Mn from Environmental Samples Using Fe3O4-Zro2@APS Nanocomposite: Kinetic and Equilibrium Isotherm Studies

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3209
Author(s):  
Aphiwe Siyasanga Gugushe ◽  
Anele Mpupa ◽  
Tshimangadzo Saddam Munonde ◽  
Luthando Nyaba ◽  
Philiswa Nosizo Nomngongo
Keyword(s):  
Electron Microscopy ◽  
Magnetic Nanomaterials ◽  
Batch Mode ◽  
X Ray ◽  
Freundlich Isotherms ◽  
Adsorption Capacities ◽  
Transmission Electron ◽  
Equilibrium Data ◽  
Pseudo Second Order ◽  
Wastewater Samples

In this study, Fe3O4-ZrO2 functionalized with 3-aminopropyltriethoxysilane (Fe3O4-ZrO2@APS) nanocomposite was investigated as a nanoadsorbent for the removal of Cd(II), Cu(II), Mn (II) and Ni(II) ions from aqueous solution and real samples in batch mode systems. The prepared magnetic nanomaterials were characterized using X-ray powder diffraction (XRD), scanning electron microscopy/energy dispersion x-ray (SEM/EDX) Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). Factors (such as adsorbent dose and sample pH) affecting the adsorption behavior of the removal process were studied using the response surface methodology. Under optimized condition, equilibrium data obtained were fitted into the Langmuir and Freundlich isotherms and the data fitted well with Langmuir isotherms. Langmuir adsorption capacities (mg/g) were found to be 113, 111, 128, and 123 mg/g for Cd, Cu, Ni and Mn, respectively. In addition, the adsorption kinetics was analyzed using five kinetic models, pseudo-first order, pseudo-second order, intraparticle diffusion and Boyd models. The adsorbent was successfully applied for removal of Cd(II), Cu(II), Mn (II) and Ni(II) ions in wastewater samples.

scholarly journals Mechanisms and adsorption capacities of biochar for the removal of organic and inorganic pollutants from industrial wastewater

2020 ◽  
Author(s):  
T. G. Ambaye ◽  
M. Vaccari ◽  
E. D. van Hullebusch ◽  
A. Amrane ◽  
S. Rtimi
Keyword(s):  
Organic Contaminants ◽  
Pyrolysis Temperature ◽  
Low Cost ◽  
Industrial Effluents ◽  
Economic Benefits ◽  
Inorganic Pollutants ◽  
Solution Ph ◽  
Adsorption Mechanisms ◽  
Adsorption Capacities ◽  
Temperature Solution

AbstractCurrently, due to the rapid growth of urbanization and industrialization in developing countries, a large volume of wastewater is produced from industries that contain chemicals generating high environmental risks affecting human health and the economy if not treated properly. Consequently, the development of a sustainable low-cost wastewater treatment approach has attracted more attention of policymakers and scientists. The present review highlights the recent applications of biochar in removing organic and inorganic pollutants present in industrial effluents. The recent modes of preparation, physicochemical properties and adsorption mechanisms of biochar in removing organic and inorganic industrial pollutants are also reviewed comprehensively. Biochar showed high adsorption of industrial dyes up to 80%. It also discusses the recent application and mechanism of biochar-supported photocatalytic materials for the degradation of organic contaminants in wastewater. We reviewed also the possible optimizations (such as the pyrolysis temperature, solution pH) allowing the increase of the adsorption capabilities of biochar leading to organic contaminants removal. Besides, increasing the pyrolysis temperature of the biochar was seen to lead to an increase in its surface area, while it decreases their amount of oxygen-containing functional groups, consequently leading to a decrease in the adsorption of metal (loid) ions present in the medium. Finally, the review suggests that more research should be carried out to optimize the main parameters involved in biochar production and its regeneration methods. Future efforts should be also carried out towards process engineering to improve its adsorption capacity to increase the economic benefits of its implementation.

Adsorption of the harmful hormone ethinyl estradiol inside hydrophobic cavities of CTA+ intercalated montmorillonite

2016 ◽  
Vol 74 (3) ◽  
pp. 663-671 ◽  
Author(s):  
A. E. Burgos ◽  
Tatiana A. Ribeiro-Santos ◽  
Rochel M. Lago
Keyword(s):  
Cetyltrimethylammonium Bromide ◽  
High Efficiency ◽  
Interlayer Space ◽  
Ethinyl Estradiol ◽  
Significant Loss ◽  
X Ray Diffraction ◽  
X Ray ◽  
Hydrophobic Cavity ◽  
Adsorption Capacities ◽  
Derivative Thermogravimetry

Hydrophobic cavities produced by cetyltrimethylammonium cation (CTA+) exchanged and trapped in the interlayer space of montmorillonite were used to remove the harmful hormone contaminant ethinyl estradiol (EE2) from water. X-ray diffraction, thermogravimetry/derivative thermogravimetry, elemental analysis (carbon, hydrogen, nitrogen), Fourier transform infrared, scanning electron microscopy/energy dispersive spectroscopy, Brunauer–Emmett–Teller and contact angle analyses showed that the intercalation of 9, 16 and 34 wt% CTA+ in the montmorillonite resulted in the d001 expansion from 1.37 to 1.58, 2.09 and 2.18 nm, respectively. EE2 adsorption experiments showed that the original clay montmorillonite does not remove EE2 from water whereas the intercalated composites showed high efficiency with adsorption capacities of 4.3, 8.8 and 7.3 mg g−1 for M9CTA+, M16CTA+ and M34CTA+, respectively. Moreover, experiments with montmorillonite simply impregnated with cetyltrimethylammonium bromide showed that the intercalation of CTA+ to form the hydrophobic cavity is very important for the adsorption properties. Simple solvent extraction can be used to remove the adsorbed EE2 without significant loss of CTA+, which allows the recovery and reuse of the adsorbent for at least five times.

Effect of carburizing and annealing processes in improving the Ni/WC–Co adhesion strength

2017 ◽  
Vol 232 (3) ◽  
pp. 338-348 ◽  
Author(s):  
AW Hassan ◽  
MY Noordin ◽  
S Izman ◽  
K Denni
Keyword(s):  
Heat Treatment ◽  
Adhesion Strength ◽  
Positive Impact ◽  
Process Condition ◽  
Scratch Test ◽  
Process Conditions ◽  
X Ray ◽  
Treatment Processes ◽  
Before And After ◽  
Field Emission Electron Microscopy

Heat treatment processes have a positive impact in improving the adhesion strength of different interlayer/substrate materials. However, information regarding the effect of these processes in enhancing the adhesion strength of an electroplated nickel interlayer on tungsten carbide substrate for diamond deposition is lacking. In this study, the effect of carburizing and annealing process conditions in enhancing the adhesion strength of the electroplated nickel interlayer was investigated. The heat treatment processes were designed and modeled by the design of experiments technique. The heat-treated specimens were characterized by the field-emission electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray diffraction techniques. The adhesion of the interlayer before and after the heat treatment was assessed by the scratch test. The results show that the adhesion of the electroplated nickel interlayer was remarkably improved by both processes. The mathematical models for predicting the adhesion strength of the carburized and annealed nickel interlayer within the specified ranges were developed. The maximum adhesion strength of 30 N was obtained from the nickel interlayer annealed at the highest process condition of temperature and time.

Sign in / Sign up

Export Citation Format

Share Document