scholarly journals Low-Cost and Eco-Friendly Hydroxyapatite Nanoparticles Derived from Eggshell Waste for Cephalexin Removal

Separations ◽  
2022 ◽  
Vol 9 (1) ◽  
pp. 10
Author(s):  
Huda S. Alhasan ◽  
Nadiyah Alahmadi ◽  
Suhad A. Yasin ◽  
Mohammed Y. Khalaf ◽  
Gomaa A. M. Ali
Keyword(s):  
Aqueous Solutions ◽  
High Efficiency ◽  
Low Cost ◽  
Chemical Precipitation ◽  
Solution Temperature ◽  
Order Kinetic ◽  
Experimental Conditions ◽  
Removal Process ◽  
The Impact ◽  
Eggshell Waste

This work describes the hydroxyapatite nanoparticle (HAP) preparation from eggshell waste and their application as an adsorbent for Cephalexin (Ceph) antibiotic removal from aqueous solutions. Chemical precipitation with phosphoric acid was used to evaluate the feasibility of calcium oxide for HAP preparation. The structural properties of HAP were characterized by X-ray diffraction, which revealed the formation of the hydroxyapatite crystalline phase formation. In addition, transmitting electron spectroscopy showed an irregular shape with a variation in size. The impact of various experimental conditions on the removal efficiency such as the solution’s pH, contact time, HAP mass, solution temperature, and Ceph concentration were studied. Experimental data showed that HAP could remove most Ceph species from aqueous solutions within 1 h at pH = 7 with 70.70% adsorption efficiency utilizing 50 mg of the HAP. The removal process of Ceph species by HAP was kinetically investigated using various kinetic models, and the results showed the suitability of the pseudo-second-order kinetic model for the adsorption process description. Moreover, the removal process was thermodynamically investigated; the results showed that the removal was spontaneous endothermic and related to the randomness increase. The data confirmed that HAP had high efficiency in removing Ceph antibiotics from an aqueous solution.

scholarly journals Adsorption of Cr(Vi) Ion from Aqueous Solutions by Solid Waste of Potato Peels

2017 ◽  
Vol 5 (3) ◽  
pp. 254 ◽  
Author(s):  
Nidhal M. Sher Mohammed ◽  
Haydar A. Mohammad Salim
Keyword(s):  
Aqueous Solutions ◽  
Metal Ion ◽  
High Efficiency ◽  
Low Cost ◽  
Ion Concentration ◽  
Potato Peel ◽  
Order Model ◽  
Experimental Conditions ◽  
Langmuir Adsorption ◽  
Potato Peels

Pollution of wastewater with heavy metal has always been a serious problem to the environment. Chromium is considered one of the most noxious heavy metals. Adsorption is now reorganized as an alternative technology of defence for chromium removal due to local availability, technical efficiency and cost effectiveness. Potato peel powder can be used as a low cost biosorbent to remove hexavalent chromium from aqueous solutions under various experimental conditions. Different parameters including equilibrium contact time, initial metal ion concentration, potato peel dose, pH and temperature were studied through a number of batch sorption experiments. Both the Langmuir and Freundlich were found to fit the adsorption isotherm of Cr (VI) ion onto potato peel. The Langmuir adsorption capacity was found to be 1.97 mg/g while Freundlich constants including Kf and n were 1.57 and 2.5, respectively. The adsorption kinetic was found to be more fit with the pseudo-first order model. This study showed a high efficiency of potato peel for the biosorption of Cr (VI) ion from aqueous solutions.

Use of sesame stalk biomass for the removal of Ni(II) and Zn(II) from aqueous solutions

2012 ◽  
Vol 66 (2) ◽  
pp. 231-238 ◽  
Author(s):  
Çisem Kırbıyık ◽  
Murat Kılıç ◽  
Özge Çepelioğullar ◽  
Ayşe E. Pütün
Keyword(s):  
Aqueous Solutions ◽  
Metal Ions ◽  
Metal Ion ◽  
Low Cost ◽  
Second Order ◽  
Solution Temperature ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Pseudo Second Order

In this study an agricultural residue, sesame stalk, was evaluated for the removal of Ni(II) and Zn(II) metal ions from aqueous solutions. Biosorption studies were carried out at different pH, biosorbent dosage, initial metal ion concentrations, contact time, and solution temperature to determine the optimum conditions. The experimental data were modeled by Langmuir, Freundlich, Dubinin-Radushkevich (D-R) and Temkin isotherm models. Langmuir model resulted in the best fit of the biosorption data. The pseudo-first-order and pseudo-second-order kinetic models were used to describe the kinetic data and to evaluate rate constants. The best correlation was provided by the second-order kinetic model. The thermodynamic parameters such as ΔG°, ΔH° and ΔS° were calculated for predicting the nature of adsorption. The experimental results showed that sesame stalk can be used as an effective and low-cost biosorbent precursor for the removal of heavy metal ions from aqueous solutions.

A new sand adsorbent for the removal and reuse of nickel ions from aqueous solutions

2017 ◽  
Vol 75 (8) ◽  
pp. 1812-1819 ◽  
Author(s):  
Wenhong Tao ◽  
Ling Qi ◽  
Huimin Duan ◽  
Shiquan Liu
Keyword(s):  
Aqueous Solutions ◽  
Removal Efficiency ◽  
Solution Temperature ◽  
Porous Coating ◽  
Order Kinetic ◽  
Adsorption Model ◽  
Experimental Conditions ◽  
Nickel Ions ◽  
Order Kinetic Model ◽  
Ph Range

Nickel ions (Ni(II)) in aqueous solutions were removed by a sand adsorbent with a surface functionalized porous coating. The sand adsorbent has a very large surface area of 150 m2/g. The influence of pH, initial concentration of the solution, temperature, contact time and adsorbent dosage on the removal efficiency of the synthesized sand adsorbent toward Ni(II) in the aqueous solutions were studied. The results indicate that the adsorption of nickel onto the sand adsorbent greatly increases the pH range of 2–4 and slightly increases with temperature from 25 to 40 °C. The maximum removal efficiency and ion retention in per unit mass of the adsorbent were 100% and 5.78 mg/g, respectively, under the specified experimental conditions. The adsorption can be described by the pseudo-second-order kinetic model and the Freundlich adsorption model. The adsorbed nickel (4.24 mg/g) together with the spent adsorbent were successfully employed to prepare a brown glass, suggesting a new way to reutilize the recovered nickel from wastewater and to avoid secondary pollution caused by the used adsorbents.

Comparison of the fixation of several metal ions onto a low-cost biopolymer

2002 ◽  
Vol 2 (5-6) ◽  
pp. 217-224 ◽  
Author(s):  
Z. Reddad ◽  
C. Gérente ◽  
Y. Andrès ◽  
P. Le Cloirec
Keyword(s):  
Aqueous Solutions ◽  
Metal Ions ◽  
Low Cost ◽  
Operating Conditions ◽  
Order Kinetic ◽  
Adsorption Mechanisms ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Beet Pulp ◽  
Removal Of Metal Ions

In the present work, sugar beet pulp, a common waste from the sugar refining industry, was studied in the removal of metal ions from aqueous solutions. The ability of this cheap biopolymer to sorb several metals namely Pb2+, Cu2+, Zn2+, Cd2+ and Ni2+ in aqueous solutions was investigated. The metal fixation capacities of the sorbent were determined according to operating conditions and the fixation mechanisms were identified. The biopolymer has shown high elimination rates and interesting metal fixation capacities. A pseudo-second-order kinetic model was tested to investigate the adsorption mechanisms. The kinetic parameters of the model were calculated and discussed. For 8 × 10-4 M initial metal concentration, the initial sorption rates (v0) ranged from 0.063 mmol.g-1.min-1 for Pb2+ to 0.275 mmol.g-1.min-1 for Ni2+ ions, with the order: Ni2+ > Cd2+ > Zn2+ > Cu2+ > Pb2+. The equilibrium data fitted well with the Langmuir model and showed the following affinity order of the material: Pb2+ > Cu2+ > Zn2+ > Cd2+ > Ni2+. Then, the kinetic and equilibrium parameters calculated qm and v0 were tentatively correlated to the properties of the metals. Finally, equilibrium experiments in multimetallic systems were performed to study the competition of the fixation of Pb2+, Zn2+ and Ni2+ cations. In all cases, the metal fixation onto the biopolymer was found to be favourable in multicomponent systems. Based on these results, it is demonstrated that this biosorbent represents a low-cost solution for the treatment of metal-polluted wastewaters.

scholarly journals Chemical Modification of Combusted Coal Gangue for U(VI) Adsorption: Towards a Waste Control by Waste Strategy

2021 ◽  
Vol 13 (15) ◽  
pp. 8421
Author(s):  
Yuan Gao ◽  
Jiandong Huang ◽  
Meng Li ◽  
Zhongran Dai ◽  
Rongli Jiang ◽  
...  
Keyword(s):  
Structural Analysis ◽  
High Efficiency ◽  
Low Cost ◽  
Chemical Activation ◽  
Cost Effective ◽  
Coal Gangue ◽  
Order Kinetic ◽  
Practical Applications ◽  
Detailed Structural Analysis ◽  
Alkaline Conditions

Uranium mining waste causes serious radiation-related health and environmental problems. This has encouraged efforts toward U(VI) removal with low cost and high efficiency. Typical uranium adsorbents, such as polymers, geopolymers, zeolites, and MOFs, and their associated high costs limit their practical applications. In this regard, this work found that the natural combusted coal gangue (CCG) could be a potential precursor of cheap sorbents to eliminate U(VI). The removal efficiency was modulated by chemical activation under acid and alkaline conditions, obtaining HCG (CCG activated with HCl) and KCG (CCG activated with KOH), respectively. The detailed structural analysis uncovered that those natural mineral substances, including quartz and kaolinite, were the main components in CCG and HCG. One of the key findings was that kalsilite formed in KCG under a mild synthetic condition can conspicuous enhance the affinity towards U(VI). The best equilibrium adsorption capacity with KCG was observed to be 140 mg/g under pH 6 within 120 min, following a pseudo-second-order kinetic model. To understand the improved adsorption performance, an adsorption mechanism was proposed by evaluating the pH of uranyl solutions, adsorbent dosage, as well as contact time. Combining with the structural analysis, this revealed that the uranyl adsorption process was mainly governed by chemisorption. This study gave rise to a utilization approach for CCG to obtain cost-effective adsorbents and paved a novel way towards eliminating uranium by a waste control by waste strategy.

scholarly journals Adsorptive Removal of Phosphate from Aqueous Solutions Using Low-Cost Volcanic Rocks: Kinetics and Equilibrium Approaches

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1312
Author(s):  
Dereje Tadesse Mekonnen ◽  
Esayas Alemayehu ◽  
Bernd Lennartz
Keyword(s):  
Aqueous Solutions ◽  
Low Income ◽  
Low Cost ◽  
Volcanic Rocks ◽  
Phosphate Removal ◽  
Phosphate Adsorption ◽  
Adsorptive Capacity ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Adsorptive Removal

The contamination of surface and groundwater with phosphate originating from industrial and household wastewater remains a serious environmental issue in low-income countries. Herein, phosphate removal from aqueous solutions was studied using low-cost volcanic rocks such as pumice (VPum) and scoria (VSco), obtained from the Ethiopian Great Rift Valley. Batch adsorption experiments were conducted using phosphate solutions with concentrations of 0.5 to 25 mg·L−1 to examine the adsorption kinetic as well as equilibrium conditions. The experimental adsorption data were tested by employing various equilibrium adsorption models, and the Freundlich and Dubinin-Radushkevich (D-R) isotherms best depicted the observations. The maximum phosphate adsorption capacities of VPum and VSco were calculated and found to be 294 mg·kg−1 and 169 mg·kg−1, respectively. A pseudo-second-order kinetic model best described the experimental data with a coefficient of correlation of R2 > 0.99 for both VPum and VSco; however, VPum showed a slightly better selectivity for phosphate removal than VSco. The presence of competitive anions markedly reduced the removal efficiency of phosphate from the aqueous solution. The adsorptive removal of phosphate was affected by competitive anions in the order: HCO3− >F− > SO4−2 > NO3− > Cl− for VPum and HCO3− > F− > Cl− > SO4−2 > NO3− for VSco. The results indicate that the readily available volcanic rocks have a good adsorptive capacity for phosphate and shall be considered in future studies as test materials for phosphate removal from water in technical-scale experiments.

Phosphorus removal from aqueous solution using a novel granular material developed from building waste

2017 ◽  
Vol 75 (6) ◽  
pp. 1500-1511 ◽  
Author(s):  
Shengjiong Yang ◽  
Pengkang Jin ◽  
Xiaochang C. Wang ◽  
Qionghua Zhang ◽  
Xiaotian Chen
Keyword(s):  
Granular Material ◽  
Chemical Precipitation ◽  
Phosphate Removal ◽  
Precipitation Process ◽  
Order Kinetic ◽  
Solution Ph ◽  
Experimental Conditions ◽  
Removal Capacity ◽  
Order Kinetic Model ◽  
Pseudo Second Order

In this study, a granular material (GM) developed from building waste was used for phosphate removal from phosphorus-containing wastewater. Batch experiments were executed to investigate the phosphate removal capacity of this material. The mechanism of removal proved to be a chemical precipitation process. The characteristics of the material and resulting precipitates, the kinetics of the precipitation and Ca2+ liberation processes, and the effects of dosage and pH were investigated. The phosphate precipitation and Ca2+ liberation processes were both well described by a pseudo-second-order kinetic model. A maximum precipitation capacity of 0.51 ± 0.06 mg g−1 and a liberation capacity of 6.79 ± 0.77 mg g−1 were measured under the experimental conditions. The processes reached equilibrium in 60 min. The initial solution pH strongly affected phosphate removal under extreme conditions (pH <4 and pH >10). The precipitates comprised hydroxyapatite and brushite. This novel GM can be considered a promising material for phosphate removal from wastewater.

scholarly journals Adsorption of Rare Earth Elements from Aqueous Solutions Using Geopolymers

Proceedings ◽  
2018 ◽  
Vol 2 (10) ◽  
pp. 567 ◽  
Author(s):  
Željka Fiket ◽  
Ana Galović ◽  
Gordana Medunić ◽  
Martina Furdek Turk ◽  
Maja Ivanić ◽  
...  
Keyword(s):  
Rare Earth ◽  
Rare Earth Elements ◽  
Aqueous Solutions ◽  
High Efficiency ◽  
Low Cost ◽  
Coal Ash ◽  
Industrial Sector ◽  
Efficient Removal ◽  
Model Solutions ◽  
Technology Applications

Rare earth elements, i.e., lanthanides, are important components of many recently developed technology applications. However, their increasing use in the industrial sector, medicine, and agriculture over the last few decades has provided them with the title of “new pollutants”. Different methods are now applied for the removal of various pollutants from wastewaters, whereby the emphasis is placed on adsorption due to its simplicity, high efficiency, and low cost. In the present study, geopolymers prepared from coal ash were examined regarding their capacity for the adsorption of lanthanides from model solutions. The obtained results indicate the efficient removal of lanthanides by prepared geopolymers, depicting them as effective adsorbents for this group of elements.

Preparation of cationic waste paper and its application in poisonous dye removal

2013 ◽  
Vol 67 (11) ◽  
pp. 2560-2567 ◽  
Author(s):  
Fan Yang ◽  
Xiaojie Song ◽  
Lifeng Yan
Keyword(s):  
Low Cost ◽  
Aqueous Suspension ◽  
Order Kinetic ◽  
Acid Orange 7 ◽  
Anionic Dyes ◽  
Experimental Conditions ◽  
Adsorption Models ◽  
Acid Orange ◽  
Initial Ph ◽  
Pseudo Second Order

Cationic paper was prepared by reaction of paper with 2,3-epoxypropyltrimethylammonium chloride in aqueous suspension, and tested as low-cost adsorbent for wastewater treatment. The experimental results revealed that anionic dyes (Acid Orange 7, Acid Red 18, and Acid Blue 92) were adsorbed on the cationic paper nicely. The maximum amount of dye Acid Orange 7 adsorbed on cationic paper was 337.2 mg/g in experimental conditions. The effects of initial dye concentration, temperature, and initial pH of dye solution on adsorption capacity of cationic paper were studied. The pseudo-first-order and pseudo-second-order kinetic models were applied to describe the kinetic data. The Freundlich and Langmuir adsorption models were used to describe adsorption equilibrium. The thermodynamic data indicated that the adsorption process of dye on cationic paper occurred spontaneously.

scholarly journals The Impact and Empirical Analysis of the Development Level of E-commerce Industry on China’s Export Trade

2021 ◽  
Vol 235 ◽  
pp. 02046
Author(s):  
Chun Feng ◽  
Fei Lei ◽  
Zhijun Luo
Keyword(s):  
High Efficiency ◽  
Positive Impact ◽  
Low Cost ◽  
Status Quo ◽  
Export Trade ◽  
Empirical Methods ◽  
Existing Problems ◽  
Development Level ◽  
The Status ◽  
The Impact

With its advantages of low cost and high efficiency, e-commerce is not only favored by ordinary consumers, but also effectively promotes SMEs to find business opportunities and win the market. This article starts with the development scale of China’s e-commerce industry and the status quo of export trade, and measures the overall index of China’s e-commerce industry development level from 2008 to 2018 through empirical methods to analyze its impact on China’s export trade. The results show that the development level of the e-commerce industry has a significant positive impact on China’s export trade. Finally, it analyzes the existing problems in the development of China’s e-commerce industry.

Sign in / Sign up

Export Citation Format

Share Document