scholarly journals Peanut Shell for Energy: Properties and Its Potential to Respect the Environment

2018 ◽  
Vol 10 (9) ◽  
pp. 3254 ◽  
Author(s):  
Miguel-Angel Perea-Moreno ◽  
Francisco Manzano-Agugliaro ◽  
Quetzalcoatl Hernandez-Escobedo ◽  
Alberto-Jesus Perea-Moreno
Keyword(s):  
Energy Source ◽  
Prediction Models ◽  
Energy Content ◽  
Co2 Reduction ◽  
High Energy ◽  
Peanut Shell ◽  
Agroindustrial Waste ◽  
Solid Biofuel ◽  
Peanut Shells ◽  
Industrial Heating

The peanut (Arachys hypogaea) is a plant of the Fabaceae family (legumes), as are chickpeas, lentils, beans, and peas. It is originally from South America and is used mainly for culinary purposes, in confectionery products, or as a nut as well as for the production of biscuits, breads, sweets, cereals, and salads. Also, due to its high percentage of fat, peanuts are used for industrialized products such as oils, flours, inks, creams, lipsticks, etc. According to the Food and Agriculture Organization (FAO) statistical yearbook in 2016, the production of peanuts was 43,982,066 t, produced in 27,660,802 hectares. Peanuts are grown mainly in Asia, with a global production rate of 65.3%, followed by Africa with 26.2%, the Americas with 8.4%, and Oceania with 0.1%. The peanut industry is one of the main generators of agroindustrial waste (shells). This residual biomass (25–30% of the total weight) has a high energy content that is worth exploring. The main objectives of this study are, firstly, to evaluate the energy parameters of peanut shells as a possible solid biofuel applied as an energy source in residential and industrial heating installations. Secondly, different models are analysed to estimate the higher heating value (HHV) for biomass proposed by different scientists and to determine which most accurately fits the determination of this value for peanut shells. Thirdly, we evaluate the reduction in global CO2 emissions that would result from the use of peanut shells as biofuel. The obtained HHV of peanut shells (18.547 MJ/kg) is higher than other biomass sources evaluated, such as olive stones (17.884 MJ/kg) or almond shells (18.200 MJ/kg), and similar to other sources of biomass used at present for home and industrial heating applications. Different prediction models of the HHV value proposed by scientists for different types of biomass have been analysed and the one that best fits the calculation for the peanut shell has been determined. The CO2 reduction that would result from the use of peanut shells as an energy source has been evaluated in all production countries, obtaining values above 0.5 ‰ of their total emissions.

Combustion of Apple Juice Wastes in a Cyclone Combustor for Thermal Energy Generation (ES2009-90152)

2010 ◽  
Vol 132 (4) ◽  
Author(s):  
Elaine Virmond ◽  
Robson L. Schacker ◽  
Waldir Albrecht ◽  
Christine A. Althoff ◽  
Maurício de Souza ◽  
...  
Keyword(s):  
Energy Source ◽  
Alternative Energy ◽  
Apple Juice ◽  
Energy Content ◽  
High Energy ◽  
Industrial Sector ◽  
Nox Emission ◽  
Unburned Carbon ◽  
Cyclone Combustor ◽  
Combustion Tests

The solid waste generated from the apple juice industry (apple bagasse (AB)) was characterized as a fuel, and the potential for its utilization as an alternative energy source was assessed through its combustion in a pilot scale cyclone combustor. A comparative evaluation of the AB and sawdust (SD) properties, as well as of the emissions during the combustion tests, was performed. The high energy content of AB (lower heating value (LHV) equal to 21.09 MJ kg−1), dry and ash-free (daf) basis, which is 26.9% higher than the LHV of SD (16.62 MJ kg−1, daf), and combined with the high volatile matter content (85.36 wt %, daf) improve the ignition and burning of the solids. The emissions of CO, SO2, and NOx and the total organic carbon (TOC) were compared with guideline limits established by Brazilian and international legislation. AB generated much lower CO than sawdust in spite of almost half of excess air levels (13% compared with 26%) and met even the stringent limit of the German regulation for waste incineration. The unburned carbon percentages found in the ash resulted from SD and AB combustion tests were 0.24% and 0.96% in weight, respectively. The absence of sulfur in AB composition represents an advantage with nondetectable SO2. The average level of NOx emission with SD combustion was 242 mg N m−3 and met all the regulation limits. The average NOx emission with AB combustion though was 642 mg N m−3 and met the U.S. EPA regulation but was marginally higher than the Brazilian norm by 15%. TOC concentrations remained below the limits considered even though the TOC level was higher in the AB combustion test. Polycyclic aromatic hydrocarbons (PAH) were not detected or were under the quantification limit of the equipment used in their analysis. Comparing the properties, the burning profiles of SD and AB, and the emissions from their combustion tests, it can be stated that the waste originating from the apple juice industry is suitable for direct combustion, constituting a renewable energy source for this industrial sector.

scholarly journals BIOFUELS AS PROMISING FUELS

2015 ◽  
Vol 6 (2) ◽  
Author(s):  
Vladan Mićić ◽  
Pero Dugić ◽  
Zoran Petrović ◽  
Milorad Tomić
Keyword(s):  
Energy Source ◽  
Renewable Resources ◽  
Alternative Energy ◽  
Fossil Fuels ◽  
Energy Content ◽  
Cost Effective ◽  
High Energy ◽  
Economic Benefits ◽  
Promising Alternative ◽  
Technical Issues

The use of fossil fuels results in global warming and pollution. In comparison with fossil fuels biofuels represent an eco-friendly, biodegradable, sustainable, cost-competitive and promising alternative energy source. They contain high energy content and do not contribute to greenhouse effect. Therefore, using cheap or renewable resources as the feedstock for biofuels production has a great potential in terms of a major contribution to future energy supply. The production and use of biofuels is already well established and a further promotion of these fuels such as lipid biofuels (bioethanol, pure plant oils and biodiesel) and gas biofuels (biomethane, biohydrogen) mainly depends on non-technical issues, such as policies and cost–effectiveness. Biofuels will definitely stay for the foreseeable future and still can continue to provide the earth and the human population with a relatively clean source of energy with several benefits such as economic benefits of providing employment and health benefits of reduced carbon emissions, leading to cleaner air. With increasing sophistication of technology and intense research and development done, one can safely infer that biofuel will become more appealing and applicable for use on a globally commercial level. As such, biofuel is acknowledged as the Earth’s future energy source. Until a newer and cleaner energy source is discovered, scientists will definitely persist in researching and enhancing biofuels to make them more cost-effective, while still being environmentally friendly.

Pilot-scale combustion studies with kraft lignin in a powder burner and a CFB boiler

TAPPI Journal ◽  
2010 ◽  
Vol 9 (6) ◽  
pp. 24-30 ◽  
Author(s):  
NIKLAS BERGLIN ◽  
PER TOMANI ◽  
HASSAN SALMAN ◽  
SOLVIE HERSTAD SVÄRD ◽  
LARS-ERIK ÅMAND
Keyword(s):  
Circulating Fluidized Bed ◽  
Black Liquor ◽  
Chloride Content ◽  
Pilot Scale ◽  
High Energy ◽  
Kraft Lignin ◽  
High Energy Density ◽  
Alkali Chloride ◽  
Cfb Boiler ◽  
Solid Biofuel

Processes have been developed to produce a solid biofuel with high energy density and low ash content from kraft lignin precipitated from black liquor. Pilot-scale tests of the lignin biofuel were carried out with a 150 kW powder burner and a 12 MW circulating fluidized bed (CFB) boiler. Lignin powder could be fired in a powder burner with good combustion performance after some trimming of the air flows to reduce swirl. Lignin dried to 10% moisture content was easy to feed smoothly and had less bridging tendencies in the feeding system than did wood/bark powder. In the CFB boiler, lignin was easily handled and cofired together with bark. Although the filter cake was broken into smaller pieces and fines, the combustion was not disturbed. When cofiring lignin with bark, the sulfur emission increased compared with bark firing only, but most of the sulfur was captured by calcium in the bark ash. Conventional sulfur capture also occurred with addition of limestone to the bed. The sulfur content in the lignin had a significantly positive effect on reducing the alkali chloride content in the deposits, thus reducing the high temperature corrosion risk.

scholarly journals Towards the Hydrogen Economy—A Review of the Parameters That Influence the Efficiency of Alkaline Water Electrolyzers

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3193
Author(s):  
Ana L. Santos ◽  
Maria-João Cebola ◽  
Diogo M. F. Santos
Keyword(s):  
Energy Content ◽  
Water Electrolysis ◽  
High Energy ◽  
Operating Conditions ◽  
Energy Sources ◽  
Alkaline Water Electrolysis ◽  
Alkaline Water ◽  
New Energy ◽  
Recent Developments ◽  
Cell Components

Environmental issues make the quest for better and cleaner energy sources a priority. Worldwide, researchers and companies are continuously working on this matter, taking one of two approaches: either finding new energy sources or improving the efficiency of existing ones. Hydrogen is a well-known energy carrier due to its high energy content, but a somewhat elusive one for being a gas with low molecular weight. This review examines the current electrolysis processes for obtaining hydrogen, with an emphasis on alkaline water electrolysis. This process is far from being new, but research shows that there is still plenty of room for improvement. The efficiency of an electrolyzer mainly relates to the overpotential and resistances in the cell. This work shows that the path to better electrolyzer efficiency is through the optimization of the cell components and operating conditions. Following a brief introduction to the thermodynamics and kinetics of water electrolysis, the most recent developments on several parameters (e.g., electrocatalysts, electrolyte composition, separator, interelectrode distance) are highlighted.

Surface overgrowth on gold nanoparticles modulating high-energy facets for efficient electrochemical CO2 reduction

Nanoscale ◽  
2021 ◽  
Author(s):  
Woong Choi ◽  
Joon Woo Park ◽  
Woonghyeon Park ◽  
Yousung Jung ◽  
Hyunjoon Song
Keyword(s):  
Gold Nanoparticles ◽  
Renewable Energy ◽  
Renewable Energy Sources ◽  
Co2 Reduction ◽  
High Energy ◽  
Reduction Reaction ◽  
Chemical Energy ◽  
Energy Sources ◽  
Electrochemical Co2 Reduction

Electrochemical CO2 reduction reaction (eCO2RR) has been considered one of the potential technologies to store electricity from renewable energy sources into chemical energy. For this aim, designing catalysts with high...

scholarly journals A new type of transient high-energy source in the direction of the Galactic Centre

Nature ◽  
1996 ◽  
Vol 379 (6568) ◽  
pp. 799-801 ◽  
Author(s):  
C. Kouveliotou ◽  
J. van Paradijs ◽  
G. J. Fishman ◽  
M. S. Briggs ◽  
J. Kommers ◽  
...  
Keyword(s):  
Energy Source ◽  
High Energy ◽  
Galactic Centre ◽  
New Type

Autothermal biodrying of municipal solid waste with high moisture content

2010 ◽  
Vol 64 (2) ◽  
Author(s):  
Agnieszka Zawadzka ◽  
Liliana Krzystek ◽  
Stanisław Ledakowicz
Keyword(s):  
Moisture Content ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Energy Content ◽  
Plastic Material ◽  
Initial Moisture Content ◽  
Tubular Reactor ◽  
Calorific Value ◽  
High Energy ◽  
Total Capacity

AbstractTo carry out autothermal drying processes during the composting of biomass, a horizontal tubular reactor was designed and tested. A biodrying tunnel of the total capacity of 240 dm3 was made of plastic material and insulated with polyurethane foam to prevent heat losses. Municipal solid waste and structural plant material were used as the input substrate. As a result of autothermal drying processes, moisture content decreased by 50 % of the initial moisture content of organic waste of about 800 g kg−1. In the tested cycles, high temperatures of biodried waste mass were achieved (54–56°C). An appropriate quantity of air was supplied to maintain a satisfactory level of temperature and moisture removal in the biodried mass and high energy content in the final product. The heat of combustion of dried waste and its calorific value were determined in a calorimeter. Examinations of pyrolysis and gasification of dried waste confirmed their usefulness as biofuel of satisfactory energy content.

Optimum torrefaction range for Macaw husks aiming its use as a solid biofuel

2021 ◽  
pp. 1-28
Author(s):  
Robson L Silva ◽  
Omar Seye ◽  
Paulo P. S. Schneider
Keyword(s):  
Energy Density ◽  
Mass Loss ◽  
Energy Content ◽  
Residence Times ◽  
Biomass Feedstock ◽  
Severity Factor ◽  
Optimization Criteria ◽  
Residual Biomass ◽  
Solid Biofuel

Abstract Biomass feedstock is broadly available in many countries and a significant amount of residual biomass comes from agriculture and forest crops. This study aims to identify a consistent criteria for optimize Macaw husks torrefaction process maximizing the energy content and minimizing the mass loss. The optimization criteria is based on the Severity Factor (SF), HHVTorrified and ηSolid-Yield. The energy density (ρEnergy) does not provide consistent and indisputable evidence as an optimization criteria; the same applies to Energy-Mass Co-benefit Index (EMCI) and ηEnergy-Yield. This investigation combined few temperatures (180°C, 220°C, and 260°C) with different residence times (20, 40, and 60 min) and found that the optimum torrefaction range for Macaw husk is 220

Net energy efficiencies of Holstein, Jersey and Holstein-Jersey F1-crosses

2001 ◽  
Vol 72 (2) ◽  
pp. 335-342 ◽  
Author(s):  
R. Schwager-Suter ◽  
C. Stricker ◽  
D. Erdin ◽  
N. Künzi
Keyword(s):  
Body Weight ◽  
Body Condition ◽  
Fixed Effects ◽  
Energy Content ◽  
High Energy ◽  
Repeated Measurements ◽  
Low Energy ◽  
Body Tissue ◽  
Net Energy ◽  
Tissue Change

Abstract Net energy efficiencies were calculated from data of an experimental herd with respect to type of cow, lactation number, stage of lactation and diet. The trial consisted of 71 Holstein-Friesians, 71 Jerseys and 71 Holstein-Jersey F1-crosses in 1st, 2nd and > 2nd lactation. Data were collected during 210 days of lactation, from calving to week 30 and included total dry matter intake, energy content of foods, milk yield, milk solids, body weight, body condition scores and several body measurements. The cows were divided into four feeding groups : high and low energy content of roughage as well as high and low proportion of concentrates. Net energy efficiency was calculated as the ratio of milk energy to total net energy intake after subtracting energy utilized for maintenance and body tissue change. Body tissue change was calculated either via body-weight changes or body condition-score changes. Due to the distribution of the efficiencies being skewed, efficiencies were transformed applying a Box-Cox transformation. Transformed net energy efficiencies were analysed using a repeated measurements design considering the sequential nature of the observations. Mixed models with a compound symmetry structure for the variance components were applied. Final models contained the fixed effects of type, lactation number, feeding group and the covariates week of lactation and its square. Holstein-Jersey crosses were more efficient than purebreds, second lactation cows were least efficient, cows given low energy roughage and a lower proportion of concentrates were more efficient than cows on the other diets. Least efficient were the cows belonging to the high energy roughage and higher proportion of concentrates group. The coefficients of determination of the final models were between 0·357 and 0·492.

Sign in / Sign up

Export Citation Format

Share Document