scholarly journals An Analysis of the Dynamical Behaviour of Systems with Fractional Damping for Mechanical Engineering Applications

Symmetry ◽  
2019 ◽  
Vol 11 (12) ◽  
pp. 1499
Author(s):  
Ondiz Zarraga ◽  
Imanol Sarría ◽  
Jon García-Barruetabeña ◽  
Fernando Cortés
Keyword(s):  
Dynamical Behaviour ◽  
Point Of View ◽  
Mode Shapes ◽  
Model Parameters ◽  
The Finite Element Method ◽  
Fractional Damping ◽  
Mathematical Properties ◽  
Fractional Models ◽  
Parameter Values ◽  
Complex Damping

Fractional derivative models are widely used to easily characterise more complex damping behaviour than the viscous one, although the underlying properties are not trivial. Several studies about the mathematical properties can be found, but are usually far from the most daily applications. Thus, this paper studies the properties of structural systems whose damping is represented by a fractional model from the point of view of a mechanical engineer. First, a single-degree-of-freedom system with fractional damping is analysed. Specifically, the distribution of the poles and the dynamic response to several excitations is studied for different model parameter values highlighting dissimilarities from systems with conventional viscous damping. In fact, thanks to fractional models, particular behaviours are observed that cannot be reproduced by classical ones. Finally, the dynamics of a machine shaft supported by two bearings presenting fractional damping is analysed. The study is carried out by the Finite Element method, deriving in a system with symmetric matrices. Eigenvalues and eigenvectors are obtained by means of an iterative method, and the effect of damping is visualised on the mode shapes. In addition, the response to a perturbation is computed, revealing the influence of the model parameters on the resulting vibration.

EXPONENTIATED HALF-LOGISTIC LOMAX DISTRIBUTION WITH PROPERTIES AND APPLICATION

2019 ◽  
Vol XVI (2) ◽  
pp. 1-11
Author(s):  
Farrukh Jamal ◽  
Hesham Mohammed Reyad ◽  
Soha Othman Ahmed ◽  
Muhammad Akbar Ali Shah ◽  
Emrah Altun
Keyword(s):  
Real Data ◽  
Continuous Model ◽  
Model Parameters ◽  
Data Set ◽  
Lomax Distribution ◽  
Mathematical Properties ◽  
Proposed Model ◽  
Probability Weighted Moment ◽  
Record Statistics ◽  
Maximum Likelihood Criterion

A new three-parameter continuous model called the exponentiated half-logistic Lomax distribution is introduced in this paper. Basic mathematical properties for the proposed model were investigated which include raw and incomplete moments, skewness, kurtosis, generating functions, Rényi entropy, Lorenz, Bonferroni and Zenga curves, probability weighted moment, stress strength model, order statistics, and record statistics. The model parameters were estimated by using the maximum likelihood criterion and the behaviours of these estimates were examined by conducting a simulation study. The applicability of the new model is illustrated by applying it on a real data set.

scholarly journals Assimilation of Dynamic Combined Finite Discrete Element Methods Using the Ensemble Kalman Filter

2021 ◽  
Vol 11 (7) ◽  
pp. 2898
Author(s):  
Humberto C. Godinez ◽  
Esteban Rougier
Keyword(s):  
Kalman Filter ◽  
Ensemble Kalman Filter ◽  
Failure Modes ◽  
Split Hopkinson Pressure Bar ◽  
Peak Stress ◽  
Discrete Element ◽  
Material Behavior ◽  
Model Parameters ◽  
Hopkinson Pressure Bar ◽  
Parameter Values

Simulation of fracture initiation, propagation, and arrest is a problem of interest for many applications in the scientific community. There are a number of numerical methods used for this purpose, and among the most widely accepted is the combined finite-discrete element method (FDEM). To model fracture with FDEM, material behavior is described by specifying a combination of elastic properties, strengths (in the normal and tangential directions), and energy dissipated in failure modes I and II, which are modeled by incorporating a parameterized softening curve defining a post-peak stress-displacement relationship unique to each material. In this work, we implement a data assimilation method to estimate key model parameter values with the objective of improving the calibration processes for FDEM fracture simulations. Specifically, we implement the ensemble Kalman filter assimilation method to the Hybrid Optimization Software Suite (HOSS), a FDEM-based code which was developed for the simulation of fracture and fragmentation behavior. We present a set of assimilation experiments to match the numerical results obtained for a Split Hopkinson Pressure Bar (SHPB) model with experimental observations for granite. We achieved this by calibrating a subset of model parameters. The results show a steady convergence of the assimilated parameter values towards observed time/stress curves from the SHPB observations. In particular, both tensile and shear strengths seem to be converging faster than the other parameters considered.

Stationary and Transient Response of Cylindrical Shells Under Random Excitation

1988 ◽  
Vol 110 (2) ◽  
pp. 205-209
Author(s):  
A. V. Singh
Keyword(s):  
Transient Response ◽  
Random Vibration ◽  
Time History ◽  
Wide Band ◽  
Random Excitation ◽  
Mode Shapes ◽  
The Finite Element Method ◽  
History Of ◽  
The Mean ◽  
Random Vibration Analysis

This paper presents the random vibration analysis of a simply supported cylindrical shell under a ring load which is uniform around the circumference. The time history of the excitation is assumed to be a stationary wide-band random process. The finite element method and the condition of symmetry along the length of the cylinder are used to calculate the natural frequencies and associated mode shapes. Maximum values of the mean square displacements and velocities occur at the point of application of the load. It is seen that the transient response of the shell under wide band stationary excitation is nonstationary in the initial stages and approaches the stationary solution for large value of time.

scholarly journals A New Fuzzy-Based Maximum Power Point Tracker for a Solar Panel Based on Datasheet Values

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Ali Kargarnejad ◽  
Mohsen Taherbaneh ◽  
Amir Hosein Kashefi
Keyword(s):  
Real Data ◽  
Point Of View ◽  
Solar Panel ◽  
Maximum Power ◽  
Model Parameters ◽  
Maximum Power Point ◽  
Knowing That ◽  
Stability Point ◽  
Power Point ◽  
Speed Accuracy

Tracking maximum power point of a solar panel is of interest in most of photovoltaic applications. Solar panel modeling is also very interesting exclusively based on manufacturers data. Knowing that the manufacturers generally give the electrical specifications of their products at one operating condition, there are so many cases in which the specifications in other conditions are of interest. In this research, a comprehensive one-diode model for a solar panel with maximum obtainable accuracy is fully developed only based on datasheet values. The model parameters dependencies on environmental conditions are taken into consideration as much as possible. Comparison between real data and simulations results shows that the proposed model has maximum obtainable accuracy. Then a new fuzzy-based controller to track the maximum power point of the solar panel is also proposed which has better response from speed, accuracy and stability point of view respect to the previous common developed one.

Investigating the vibrational behaviour of a rotating two-blade propeller by using a self-tracking method

2018 ◽  
Vol 233 (3) ◽  
pp. 835-847 ◽  
Author(s):  
Mohammad-Reza Ashory ◽  
Farhad Talebi ◽  
Heydar R Ghadikolaei ◽  
Morad Karimpour
Keyword(s):  
Natural Frequency ◽  
Measurement Errors ◽  
Mode Shapes ◽  
Model Parameters ◽  
Test Results ◽  
Modal Assurance Criterion ◽  
Tracking Method ◽  
Strong Resemblance ◽  
Test Scenarios ◽  
Good Agreement

This study investigated the vibrational behaviour of a rotating two-blade propeller at different rotational speeds by using self-tracking laser Doppler vibrometry. Given that a self-tracking method necessitates the accurate adjustment of test setups to reduce measurement errors, a test table with sufficient rigidity was designed and built to enable the adjustment and repair of test components. The results of the self-tracking test on the rotating propeller indicated an increase in natural frequency and a decrease in the amplitude of normalized mode shapes as rotational speed increases. To assess the test results, a numerical model created in ABAQUS was used. The model parameters were tuned in such a way that the natural frequency and associated mode shapes were in good agreement with those derived using a hammer test on a stationary propeller. The mode shapes obtained from the hammer test and the numerical (ABAQUS) modelling were compared using the modal assurance criterion. The examination indicated a strong resemblance between the hammer test results and the numerical findings. Hence, the model can be employed to determine the other mechanical properties of two-blade propellers in test scenarios.

scholarly journals The Gamma Generalized Pareto Distribution with Applications in Survival Analysis

2017 ◽  
Vol 6 (3) ◽  
pp. 141 ◽  
Author(s):  
Thiago A. N. De Andrade ◽  
Luz Milena Zea Fernandez ◽  
Frank Gomes-Silva ◽  
Gauss M. Cordeiro
Keyword(s):  
Monte Carlo Simulation ◽  
Pareto Distribution ◽  
Generalized Pareto Distribution ◽  
Real Data ◽  
Model Parameters ◽  
Monte Carlo Simulation Study ◽  
Lorenz Curves ◽  
Generalized Pareto ◽  
Mathematical Properties ◽  
Pareto Model

We study a three-parameter model named the gamma generalized Pareto distribution. This distribution extends the generalized Pareto model, which has many applications in areas such as insurance, reliability, finance and many others. We derive some of its characterizations and mathematical properties including explicit expressions for the density and quantile functions, ordinary and incomplete moments, mean deviations, Bonferroni and Lorenz curves, generating function, R\'enyi entropy and order statistics. We discuss the estimation of the model parameters by maximum likelihood. A small Monte Carlo simulation study and two applications to real data are presented. We hope that this distribution may be useful for modeling survival and reliability data.

scholarly journals A fractional order mathematical model for COVID-19 dynamics with quarantine, isolation, and environmental viral load

2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Mohammed A. Aba Oud ◽  
Aatif Ali ◽  
Hussam Alrabaiah ◽  
Saif Ullah ◽  
Muhammad Altaf Khan ◽  
...  
Keyword(s):  
Epidemic Model ◽  
Reproduction Number ◽  
Model Parameters ◽  
Disease Dynamics ◽  
Threshold Parameter ◽  
Fractional Model ◽  
Infected People ◽  
Fractional Models ◽  
Disease Epidemics ◽  
The Impact

AbstractCOVID-19 or coronavirus is a newly emerged infectious disease that started in Wuhan, China, in December 2019 and spread worldwide very quickly. Although the recovery rate is greater than the death rate, the COVID-19 infection is becoming very harmful for the human community and causing financial loses to their economy. No proper vaccine for this infection has been introduced in the market in order to treat the infected people. Various approaches have been implemented recently to study the dynamics of this novel infection. Mathematical models are one of the effective tools in this regard to understand the transmission patterns of COVID-19. In the present paper, we formulate a fractional epidemic model in the Caputo sense with the consideration of quarantine, isolation, and environmental impacts to examine the dynamics of the COVID-19 outbreak. The fractional models are quite useful for understanding better the disease epidemics as well as capture the memory and nonlocality effects. First, we construct the model in ordinary differential equations and further consider the Caputo operator to formulate its fractional derivative. We present some of the necessary mathematical analysis for the fractional model. Furthermore, the model is fitted to the reported cases in Pakistan, one of the epicenters of COVID-19 in Asia. The estimated value of the important threshold parameter of the model, known as the basic reproduction number, is evaluated theoretically and numerically. Based on the real fitted parameters, we obtained $\mathcal{R}_{0} \approx 1.50$ R 0 ≈ 1.50 . Finally, an efficient numerical scheme of Adams–Moulton type is used in order to simulate the fractional model. The impact of some of the key model parameters on the disease dynamics and its elimination are shown graphically for various values of noninteger order of the Caputo derivative. We conclude that the use of fractional epidemic model provides a better understanding and biologically more insights about the disease dynamics.

scholarly journals An enhanced set of displacement parameter restraints in CRYSTALS

2018 ◽  
Vol 51 (4) ◽  
pp. 1059-1068 ◽  
Author(s):  
Pascal Parois ◽  
James Arnold ◽  
Richard Cooper
Keyword(s):  
Structural Model ◽  
Rigid Bodies ◽  
Model Parameters ◽  
Coordinate Systems ◽  
Principal Axes ◽  
Anisotropic Displacement Parameters ◽  
Set Up ◽  
Meaningful Relationships ◽  
Parameter Values ◽  
Total Model

Crystallographic restraints are widely used during refinement of small-molecule and macromolecular crystal structures. They can be especially useful for introducing additional observations and information into structure refinements against low-quality or low-resolution data (e.g. data obtained at high pressure) or to retain physically meaningful parameter values in disordered or unstable refinements. However, despite the fact that the anisotropic displacement parameters (ADPs) often constitute more than half of the total model parameters determined in a structure analysis, there are relatively few useful restraints for them, examples being Hirshfeld rigid-bond restraints, direct equivalence of parameters and SHELXL RIGU-type restraints. Conversely, geometric parameters can be subject to a multitude of restraints (e.g. absolute or relative distance, angle, planarity, chiral volume, and geometric similarity). This article presents a series of new ADP restraints implemented in CRYSTALS [Parois, Cooper & Thompson (2015), Chem. Cent. J. 9, 30] to give more control over ADPs by restraining, in a variety of ways, the directions and magnitudes of the principal axes of the ellipsoids in locally defined coordinate systems. The use of these new ADPs results in more realistic models, as well as a better user experience, through restraints that are more efficient and faster to set up. The use of these restraints is recommended to preserve physically meaningful relationships between displacement parameters in a structural model for rigid bodies, rotationally disordered groups and low-completeness data.

scholarly journals Formal groups and Z -entropies

2016 ◽  
Vol 472 (2195) ◽  
pp. 20160143 ◽  
Author(s):  
Piergiulio Tempesta
Keyword(s):  
Algebraic Topology ◽  
Formal Group ◽  
Point Of View ◽  
Trace Form ◽  
Formal Groups ◽  
Form Class ◽  
New Family ◽  
Mathematical Properties ◽  
Composition Process ◽  
Group Law

We shall prove that the celebrated Rényi entropy is the first example of a new family of infinitely many multi-parametric entropies. We shall call them the Z-entropies . Each of them, under suitable hypotheses, generalizes the celebrated entropies of Boltzmann and Rényi. A crucial aspect is that every Z -entropy is composable (Tempesta 2016 Ann. Phys. 365 , 180–197. ( doi:10.1016/j.aop.2015.08.013 )). This property means that the entropy of a system which is composed of two or more independent systems depends, in all the associated probability space, on the choice of the two systems only. Further properties are also required to describe the composition process in terms of a group law. The composability axiom, introduced as a generalization of the fourth Shannon–Khinchin axiom (postulating additivity), is a highly non-trivial requirement. Indeed, in the trace-form class, the Boltzmann entropy and Tsallis entropy are the only known composable cases. However, in the non-trace form class, the Z -entropies arise as new entropic functions possessing the mathematical properties necessary for information-theoretical applications, in both classical and quantum contexts. From a mathematical point of view, composability is intimately related to formal group theory of algebraic topology. The underlying group-theoretical structure determines crucially the statistical properties of the corresponding entropies.

scholarly journals Modal analysis of an iced offshore composite wind turbine blade

2021 ◽  
pp. 0309524X2110116
Author(s):  
Oumnia Lagdani ◽  
Mostapha Tarfaoui ◽  
Mourad Nachtane ◽  
Mourad Trihi ◽  
Houda Laaouidi
Keyword(s):  
Wind Turbine ◽  
Modal Analysis ◽  
Turbine Blade ◽  
Natural Frequencies ◽  
Wind Turbine Blade ◽  
Resonance Phenomenon ◽  
Mode Shapes ◽  
The Finite Element Method ◽  
Numerical Work ◽  
Composite Blades

In the far north, low temperatures and atmospheric icing are a major danger for the safe operation of wind turbines. It can cause several problems in fatigue loads, the balance of the rotor and aerodynamics. With the aim of improving the rigidity of the wind turbine blade, composite materials are currently being used. A numerical work aims to evaluate the effect of ice on composite blades and to determine the most adequate material under icing conditions. Different ice thicknesses are considered in the lower part of the blade. In this paper, modal analysis is performed to obtain the natural frequencies and corresponding mode shapes of the structure. This analysis is elaborated using the finite element method (FEM) computer program through ABAQUS software. The results have laid that the natural frequencies of the blade varied according to the material and thickness of ice and that there is no resonance phenomenon.

Sign in / Sign up

Export Citation Format

Share Document