PERENCANAAN PROSES PRODUKSI PENYABLONAN T-SHIRT DENGAN METODE AGGREGATE PLANNING HEURISTIK DI DOUBLEFIVE STORE AND CLOTHING YOGYAKARTA

2021 ◽  
pp. 31-35
Author(s):  
Ius Adi Nugroho ◽  
Andrean Emaputra
Keyword(s):  
Inventory Control ◽  
Control Method ◽  
Heuristic Method ◽  
Production Capacity ◽  
Total Expenditure ◽  
Total Cost ◽  
Labor Control ◽  
Online Business ◽  
The Cost ◽  
A Company

Aggreggate planning is a way to estimate the amount of output that will be produced to meet the demand obtained from forecasting for a period of more than 3 months or less than the next 18 months to meet demand in accordance with the company's overall production capacity to minimize the total costs incurred by the company. Doublefive Store and cloting is a company engaged in the online business by producing t-shirt printing. However, this company has not found a way to minimize the total cost of expenses. Therefore, research on aggregate planning is carried out to enable companies to arrange a way of optimally utilizing resources and supplies in order to achieve effective and efficient capacity which is based on future demand forecasts to minimize total expenditure costs. The method used is the heuristic method by calculating the workforce control planning and inventory control. Based on the research results, it is known that by using the labor control method, the costs incurred by the company are less than the inventory control method. The cost incurred based on the selected method is Rp. 20,442,987.22 with a difference of Rp. 10,025 from inventory control.

scholarly journals Comparative Inventory Control Analysis With Economic Order Quantity (Eoq) And Just In Time Method To Minimize Inventory Costs At UD.Melati Jaya

2021 ◽  
Vol 5 (1) ◽  
pp. 1-7
Author(s):  
KHAIRUNNISA ALMADANY
Keyword(s):  
Inventory Control ◽  
Control Method ◽  
Economic Order Quantity ◽  
Economic Order ◽  
Just In Time ◽  
Control Analysis ◽  
Order Quantity ◽  
Total Cost ◽  
Inventory Costs ◽  
The Cost

The research discusses how To Compare Inventory Control Analysis With Economic Order Quantity (EOQ) Method and Just In Time (JIT) Method To Minimize Inventory Costs At UD. Melati Jaya. This study discusses a comparative analysis of the Economic Order Quantity method and the Just In Time method to minimize inventory costs at UD. Jasmine jaya. The data analysis method used is descriptive qualitative method with comparative research that compares the Econimic Order Quantity (EOQ) method with the Just In Time (JIT) method to the cost efficiency at UD. Melati Jaya. The analysis results from the comparative calculation of inventory control show that the Just In Time Inventory Control method is more appropriate to be applied to Ud. Melati Jaya because the total cost of the inventory is smaller than the total cost of the inventory when using the Economic Order Quantity (EOQ) method.

D. Perhitungan HPP Telur Asin Dengan Pendekatan Variabel Costing Pada UD Mulya Jaya

2019 ◽  
Vol 4 (1) ◽  
pp. 30
Author(s):  
Neno Pratiwi ◽  
Andre Setiawan ◽  
Ilmi Cayono ◽  
Johan Trinanto
Keyword(s):  
Decision Making ◽  
Production Process ◽  
Raw Materials ◽  
Selling Price ◽  
Assistance Program ◽  
Total Cost ◽  
Cost Of Production ◽  
The Cost ◽  
A Company ◽  
Important Objective

ABSTRAK Pada umumnya harga pokok produksi dalam akuntansi diartikan dengan jumlah biaya dari seluruh pemakaian yang telah dilakukan selama proses produksi atau kegiatan yang mana mengubah bahan baku menjadi produk jadi (produk siap pakai/siap saji). Tujuan penting dalam tugas ini yaitu memperhitungkan harga pokok produksi dari UD Mulya Jaya dengan menggunakan pendekatan variabel costing untuk mengetahui besarnya harga pokok pada setiap produk yang diproduksi. Pentingnya penentuan harga pokok produksi dapat dilakukan sebelum para usaha menentukan harga jual. Pendampingan ini bertujuan untuk membantu mencari dan menentukan harga pokok produksi yang dapat digunakan untuk menetapkan harga jual. Pendampingan ini dilakukan untuk membantu wirausaha dalam program kerja, yaitu bimbingan akuntansi dengan fokus perhitungan harga pokok produksi. Dalam menentukan harga pokok produksi pada UD Mulya Jaya dapat menggunakan pendekatan variable costing yang biasanya metode ini digunakan untuk semacam pengambilan keputusan dalam perusahaan. Melalui program pendampingan kewirausahaan didapatkan hasil perhitungan harga pokok produksi yang menggunakan pendekatan variabel costing. Hasil tersebut dapat menjadi suatu keputusan bagi UD Mulya Jaya untuk dapat menetapkan harga pokok produksi pada setiap produk telur asin. Kata Kunci : Kewirausahaan, HPP, Harga.   ABSTRACT In general, the cost of production in accounting is defined as the total cost of all uses that have been made during the production process or activities which convert raw materials into finished products (ready-to-use / ready-to-serve products). An important objective in this task is to calculate the cost of goods manufactured from UD Mulya Jaya by using a variable costing approach to find out the cost of goods on each product produced. The importance of determining the cost of production can be done before businesses determine the selling price. This assistance aims to help find and determine the cost of production that can be used to set the selling price. This assistance is carried out to help entrepreneurs in work programs, namely accounting guidance with a focus on calculating the cost of production. In determining the cost of production at UD Mulya Jaya, it can use the variable costing approach, which is usually used for a kind of decision making in a company. Through the entrepreneurship assistance program, the results of the calculation of the cost of production are obtained using the variable costing approach. These results can be a decision for UD Mulya Jaya to be able to set the cost of production for each salted egg product. Keywords: Entrepreneurship, COGS, Price

scholarly journals Proposed Policy Preventive Maintenance Machine Moriseiki NH 4000 DCG Method Of Reliability Center Maintenance (RCM) And Risk Based Maintenance (RBM) Case Study PT. Pudak Scientific

2018 ◽  
Vol 2 (01) ◽  
Author(s):  
Fachri Husaini
Keyword(s):  
Production Capacity ◽  
Cost Of Care ◽  
Maintenance Policy ◽  
Performance Loss ◽  
Acceptance Set ◽  
Maintenance Activities ◽  
And Performance ◽  
The Cost ◽  
A Company

PT Pudak Scientific is a company engaged in the manufacture of aircraft parts industry. Meeting the precise and timely demand of aerospace parts from customers becomes a major corporate responsibility. However, Loss Revenue often occurs due to engine breakdown. So that cause because the production target is not achieved, the product reject, and the delay of delivery. One of the machines that often experience breakdown is Mori seiki NH4000 DCG. Mori seiki NH4000 DCG is the finishing machine for Blank fork End product. The demand for this part is quite large, making it a tough task for the Mori Seiki NH4000 DCG machine. But because the breakdown of the machine is high enough to cause production targets every month are often not met. In addition, Maintenance activities that have not noticed the characteristics of engine damage, as well as the distribution of historical data of the machine causing less effective and efficient actions resulted in substantial Maintenance costs. Based on the results of risk analysis of Mori Seiki NH4000 DCG engine damage, in terms of performance loss system caused by a large enough that is 3.773% of machine production capacity per year. This figure exceeds the risk acceptance criteria by the company that is 2%. Therefore it is necessary to find the appropriate Maintenance policy for the Mori Seiki NH4000 DCG machine. The approach is to use Reliability Centeres Maintenance and Risk Based Maintenance. Based on the above two approaches obtained the appropriate interval time so that the Maintenance activities more effective and can improve the efficiency of treatment by reducing the cost of care previously Rp167.506.286, - per year, to Rp 96.147.061, - per year. With the policy is expected to reduce engine breakdown and performance loss caused. So the number of risks that arise for the future are within the criteria of acceptance set by the company.

A Model for Estimating the Savings from Dimensional vs. Keyword Search

2009 ◽  
pp. 146-157
Author(s):  
Karen Corral ◽  
David Schuff ◽  
Robert D. St. Louis ◽  
Ozgur Turetken
Keyword(s):  
Search Engine ◽  
Search Strategy ◽  
Keyword Search ◽  
Cost Effective ◽  
Quantitative Model ◽  
Total Cost ◽  
Search Approach ◽  
The Cost ◽  
Keyword Searches ◽  
A Company

Inefficient and ineffective search is widely recognized as a problem for businesses. The shortcomings of keyword searches have been elaborated upon by many authors, and many enhancements to keyword searches have been proposed. To date, however, no one has provided a quantitative model or systematic process for evaluating the savings that accrue from enhanced search procedures. This paper presents a model for estimating the total cost to a company of relying on keyword searches versus a dimensional search approach. The model is based on the Zipf-Mandelbrot law in quantitative linguistics. Our analysis of the model shows that a surprisingly small number of searches are required to justify the cost associated with encoding the metadata necessary to support a dimensional search engine. The results imply that it is cost effective for almost any business organization to implement a dimensional search strategy.

Multistage Inventory Control Research of Engineering Ships' Spare Parts

2014 ◽  
Vol 909 ◽  
pp. 236-240
Author(s):  
Quan Wen ◽  
Shi Dong Fan ◽  
Pan Jiang ◽  
Shou Hui He
Keyword(s):  
Control Theory ◽  
Inventory Control ◽  
Control Method ◽  
Spare Parts ◽  
Control Research ◽  
The Cost ◽  
Task Types ◽  
Construction Task

This paper aims to using multistage inventory control theory to optimize traditional inventory control method, meanwhile, the spare parts supply of engineering ships are guaranteed and keep the cost in the lowest level. Moreover, in accordance with all kinds of construction task types to ensure the spare parts supply to satisfy engineering ships demand, and reduce the situation of shutdown unattended which is resulted by spare parts supply not in time.

scholarly journals PERANCANGAN RENCANA PENGADAAN BAHAN BAKU PADA PERUSAHAAN JASA KONTRUKSI

2020 ◽  
Vol 22 (2) ◽  
pp. 108-115
Author(s):  
Chandra Wijaya ◽  
Celvin Santonius ◽  
Jusra Tampubolon ◽  
Irwan Budiman
Keyword(s):  
Data Analysis ◽  
Production Process ◽  
Inventory Control ◽  
Control Method ◽  
Raw Materials ◽  
Order Quantity ◽  
Analysis Method ◽  
Total Cost ◽  
Important Material ◽  
Maximum Limit

Abstract. Persediaan bahan baku merupakan bahan terpenting dalam produksi yang dilakukan oleh perusahaan. Pengendalian persediaan terhadap kuantitas bahan baku yang dilakukan gudang juga merujuk kepada proses produksi. Bahan baku dapat diperoleh dari supplier atau perusahaan yang menghasilkan bahan baku.Tujuan penelitian ini adalah untuk mengetahui total biaya persediaan semen dan mengetahui batas minimal dan maksimal untuk pemesanan semen yang harus dilakukan oleh perusahaan Cv.XYZ. Metode analisis data yang digunakan adalah Metode Period Order Quantity POQdansizing Lot For Lot didapatkan dengan Metode sizing Lot For Lot adalah metode yang memiliki biaya yang paling rendah yaitu sebesar Rp 712,136 bila dibandingkan dengan metode Period Order Quantity (POQ)  dengan biaya sebesar Rp 909,904 dan batas minimal dan maksimal pembelian semen adalah 90 sak. Abstrak. Inventory of raw materials is the most important material in production carried out by the company. Inventory control of the quantity of raw materials carried out by the warehouse also refers to the production process. Raw materials can be obtained from suppliers or companies that produce raw materials. The purpose of this study was to determine the total cost of cement supply and determine the minimum and maximum limits for ordering cement that must be carried out by a Cv Company. XYZ. The data analysis method used is the Period Order Quantity (POQ) Method and the Map Control Method is obtained by the Sizing Lot For Lot method which has the lowest cost of IDR 712,136 when compared to the Period Order Quantity (POQ) method with a fee of IDR 909,904 and the minimum and maximum limit for buying cement is 90 cigarettes.

scholarly journals Product range optimization – case study

2010 ◽  
Author(s):  
Simona Barsan ◽  
Mihaela Sima
Keyword(s):  
Production Capacity ◽  
Optimal Solution ◽  
Optimization Procedure ◽  
Product Range ◽  
Market Requirements ◽  
Products Analysis ◽  
The Cost ◽  
A Company ◽  
Selection Of

The paper presents the optimizing procedure of the product range manufactured by a company which operates in the area of production and sales of the milling and bakery products. The paper authors have taken this company as an example since the products it manufactures and commercializes address to population and are required to meet both qualitative and quantitative market requirements. After a brief overview of the company, one analyses its production capacity, staff structure and distribution as well as the concern of the company for the employees’ training in its activity field, so as to fulfill all the necessary and required conditions for developing a qualitative activity. The analysis continues with: the cost of the product before optimization, software presentation and computerized optimization procedure, the selection of the products to be optimized, data collection, the optimization procedure, results obtaining and analysis, choosing the optimal solution for the analyzed products analysis and for the future competitiveness of the company.

COMPARATIVE EVALUATION OF EFFICIENCY OF METHODS OF SULFITATION AND ACIDIFICATION WITH SULFURIC ACID IN THE PROCESSING OF THE EXTRACTING BEET SUGAR PRODUCTION

2019 ◽  
Author(s):  
С.О. СЕМЕНИХИН ◽  
В.О. ГОРОДЕЦКИЙ ◽  
Н.М. ДАИШЕВА ◽  
Н.И. КОТЛЯРЕВСКАЯ
Keyword(s):  
Sulfuric Acid ◽  
Sulfur Dioxide ◽  
Production Capacity ◽  
Cost Effective ◽  
Total Cost ◽  
Advantages And Disadvantages ◽  
Negative Effect ◽  
Design Characteristics ◽  
Equipment And Pipelines ◽  
The Cost

Проведено сравнение технических преимуществ и недостатков способов сульфитации и подкисления серной кислотой при обработке экстрагента свеклосахарного производства. Рассчитана стоимость основного оборудования и материалов для каждой схемы обработки экстрагента с целью выявления наиболее экономически эффективного способа. Расчет проведен для сахарного завода, имеющего производственную мощность 5000 т свеклы в сутки. Установлено, что способ подкисления серной кислотой имеет одно техническое преимущество – простоту дозирования серной кислоты, но уступает способу сульфитации по суммарным затратам на оборудование и трубопроводы, составившим около 10 млн р. Способ сульфитации также имеет недостатки технического характера – зависимость абсорбции экстрагентом сернистого ангидрида от конструктивных характеристик сульфитационных установок и равномерности технологического потока, негативное влияние которых можно снизить путем применения современных сульфитаторов жидкостно-струйного типа, обеспечивающих стопроцентную утилизацию сернистого ангидрида в диапазоне от 50 до 120% от их расчетной производительности. Суммарные затраты на оборудование и трубопроводы при схеме сульфитационной обработки экстрагента составили около 7,7 млн р. Таким образом, реализация схемы сульфитации в 1,25 раза дешевле, чем схемы подкисления экстрагента серной кислотой. По стоимости реагента сульфитационная обработка примерно в 13 раз выгоднее по сравнению со схемой подкисления серной кислотой. Comparison of technical advantages and disadvantages of sulfitation and acidification methods by sulfuric acid in the treatment of extracting of sugar beet production was carried out. The cost of the main equipment and materials for each treatment scheme of the extracting is calculated in order to identify the most cost-effective way. The calculation was carried out for a sugar factory with a production capacity of 5000 tons of beets per day. It is established that the method of acidification with sulfuric acid has one technical advantage-the simplicity of dosing sulfuric acid, but is inferior to the method of sulfitation for the total cost of equipment and pipelines, amounting to about 10 million rubles. The sulfitation method also has technical disadvantages-the dependence of the absorption of sulfur dioxide by the extracting on the design characteristics of the sulfitation plants used and the uniformity of the process flow, the negative effect of which can be reduced by the use of modern liquid-jet sulfitators, providing 100% utilization of sulfur dioxide in the range from 50 to 120% of their design capacity. The total cost of equipment and pipelines in the scheme of sulfitation treatment of the extracting will be about 7,7 million rubles. Thus, the implementation of the sulfitation scheme is 1,25 times cheaper than the scheme of acidification of the extracting with sulfuric acid. Sulfitation treatment at the cost of the reagent is about 13 times more profitable compared to the scheme of acidification with sulfuric acid.

scholarly journals EVALUASI PENGENDALIAN PERSEDIAAN BAHAN BAKU DENGAN METODE MATERIAL REQUIREMENT PLANNING PADA HOME INDUSTRYSARANA BERSIH “LIMA”

2018 ◽  
Vol 4 (2) ◽  
Author(s):  
Sugeng Pramono
Keyword(s):  
Inventory Control ◽  
Raw Material ◽  
Analysis Tool ◽  
Control Material ◽  
Total Cost ◽  
Inventory Costs ◽  
Material Requirement Planning ◽  
Material Requirement ◽  
Control Evaluation ◽  
The Cost

The purpose of this study is to determine the results of Raw Material Inventory Control evaluation with Material Requirement Planning method in May 2014, so the company Home Industry Sarana Bersih " Lima "can minimize inventory costs. Analysis tool used is a method of inventory control with materials requirement planning (MRP) engineering approach. MRP method is a mathematical method or technique that is used to assist managers in making decisions regarding the amount of inventory, production planning schedule, the schedule ordering, and inventory costs. Based on the analysis by using the method of Material Requirement Planning it can be seen that the results of the cost incurred by the company on the stock in May is 1.220.000 rupiah. There are savings of 293.400 rupiah of the total cost of 1.513.400 rupiah.Keywords: Inventory, Inventory control, Material Requirement Planning.

scholarly journals Penentuan Kuantitas Produksi Kue Brownies yang Optimal pada Model Persediaan Periode Tunggal

2021 ◽  
Vol 1 (1) ◽  
pp. 30-36
Author(s):  
Vini Damayanti ◽  
M. Yusuf Fajar
Keyword(s):  
Production Process ◽  
Inventory Management ◽  
Total Cost ◽  
Holding Costs ◽  
Inventory Costs ◽  
Holding Cost ◽  
The Cost ◽  
A Company ◽  
Optimal Quantity ◽  
Period Model

Abstract. Inventory is an important part of a manufacturing company, both before the production process begins, during the production process or after the production process is complete. Inventory control in a company must be carried out as optimally as possible. Shortage or excess of inventory will cause losses for the company. Holding costs will be large if there is excess inventory. With the availability of inventory management, it can anticipate a surge in demand from consumers. Inventory management is also used to optimize inventory as possible to reduce inventory costs. In this thesis, analyze the optimal quantity of brownie cake production using a single period model. In this model, it must determine the level of inventory, the holding cost of inventory, and the cost of shortage of inventory. Once determined, it can be seen from the optimal brownies cake production results. Based on the results of the data analysis of the optimal quantity of brownie cake production, it can be seen that the optimal of 8 packages or 200 pcs with an expected total cost of  Rp. 12.825.540. Abstrak. Persediaan merupakan bagian yang penting dalam suatu perusahaan manufaktur, baik sebelum proses produksi dimulai, saat proses produksi berlangsung maupun setelah proses produksi selesai. Pengendalian persediaan dalam suatu perusahaan harus dilakukan seoptimal mungkin. Kekurangan maupun kelebihan persediaan akan dapat menimbulkan kerugian bagi perusahaan. Biaya penyimpanan akan menjadi besar bila terjadi kelebihan persediaan. Dengan adanya manajemen persediaan dapat mengantisipasi lonjakan permintaan dari konsumen. Manajemen persedian juga berguna untuk mengoptimalkan persediaan seoptimal mungkin guna mengurangi biaya persediaan. Pada skripsi ini, di lakukan analisis penentuan kuantitas produksi kue brownies yang optimal dengan menggunakan model periode tunggal. Pada model ini harus menentukan level inventory, biaya simpan, dan biaya kekurangan persediaan. setelah ditentukan maka dapat dilihat hasil produksi kue brownies yang optimal. Berdasarkan hasil analisis data kuantitas produksi kue brownies yang optimal sebanyak 8 pack atau 200 pcs dengan ekspektasi ongkos total Rp. Rp. 12.825.540.

Sign in / Sign up

Export Citation Format

Share Document