scholarly journals Designing a new generation of expression toolkits for engineering of green microalgae; robust production of human interleukin-2

Bioimpacts ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 259-268
Author(s):  
Jaber Dehghani ◽  
Khosro Adibkia ◽  
Ali Movafeghi ◽  
Mohammad M. Pourseif ◽  
Yadollah Omidi
Keyword(s):  
Recombinant Proteins ◽  
Interleukin 2 ◽  
Cost Effective ◽  
Total Soluble Protein ◽  
Post Translational Modifications ◽  
Unstable Gene ◽  
Protein Synthesis Machinery ◽  
Wide Range ◽  
High Transformation ◽  
New Generation

Introduction: Attributable to some critical features especially the similarity of the protein synthesis machinery between humans and microalgae, these microorganisms can be utilized for the expression of many recombinant proteins. However, low and unstable gene expression levels prevent the further development of microalgae biotechnology towards protein production. Methods: Here, we designed a novel "Gained Agrobacterium-2A plasmid for microalgae expression" (named GAME plasmid) for the production of the human interleukin-2 using three model microalgae, including Chlamydomonas reinhardtii, Chlorella vulgaris, and Dunaliella salina. The GAME plasmid harbors a native chimeric hsp70/Int-1/rbcS2 promoter, the microalgae specific Kozak sequence, a novel hybrid 2A peptide, and Int-1 and Int-3 of the rbcS2 gene in its expression cassette. Results: The obtained data confirmed that the GAME plasmid can transform the microalgae with high transformation frequency. Molecular and proteomic analyses revealed the stable and robust production of the hIL-2 by the GAME plasmid in the microalgae. According to the densimetric analysis, the microalgae can accumulate the produced protein about 0.94% of the total soluble protein content. The ELISA data confirmed that the produced hIL-2 possesses the same conformation pattern with the acceptable biological activity found naturally in humans. Conclusion: Most therapeutic proteins need post-translational modifications for their correct conformation, biological function, and half-life. Accordingly, microalgae could be considered as a cost-effective and more powerful platform for the production of a wide range of recombinant proteins such as antibodies, enzymes, hormones, and vaccines.

Bio-based polyhydroxyalkanoates blends and composites

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Samy A. Madbouly
Keyword(s):  
Mechanical Properties ◽  
Functional Materials ◽  
Cost Effective ◽  
Production Method ◽  
Industrial Applications ◽  
Mechanical And Thermal Properties ◽  
Wide Range ◽  
High Production ◽  
High Production Cost ◽  
New Generation

Abstract Polyhydroxyalkanoates (PHAs) are linear semicrystalline polyesters produced naturally by a wide range of microorganisms for carbon and energy storage. PHAs can be used as replacements for petroleum-based polyethylene (PE) and polypropylene (PP) in many industrial applications due to their biodegradability, excellent barrier, mechanical, and thermal properties. The overall industrial applications of PHAs are still very limited due to the high production cost and high stiffness and brittleness. Therefore, new novel cost-effective production method must be considered for the new generation of PHAs. One approach is based on using different type feedstocks and biowastes including food byproducts and industrial and manufacturing wastes, can lead to more competitive and cost-effective PHAs products. Modification of PHAs with different function groups such as carboxylic, hydroxyl, amine, epoxy, etc. is also a relatively new approach to create new functional materials with different industrial applications. In addition, blending PHA with biodegradable materials such as polylactide (PLA), poly(ε-caprolactone) (PCL), starch, and distiller’s dried grains with solubles (DDGS) is another approach to address the drawbacks of PHAs and will be summarized in this chapter. A series of compatibilizers with different architectures were successfully synthesized and used to improve the compatibility and interfacial adhesion between PHAs and PCL. Finer morphology and significantly improvement in the mechanical properties of PHA/PCL blends were observed with a certain type of block compatibilizer. In addition, the improvement in the blend morphology and mechanical properties were found to be strongly influenced by the compatibilizer architecture.

A review on graphene-based polymer composite coatings for the corrosion protection of metals

2019 ◽  
Vol 37 (4) ◽  
pp. 343-363 ◽  
Author(s):  
Ahmed Khalid Hussain ◽  
Izman Sudin ◽  
Uday M. Basheer ◽  
Mohd Zamri Mohd Yusop
Keyword(s):  
Polymer Composite ◽  
Composite Coatings ◽  
Cost Effective ◽  
Industrial Applications ◽  
Surface Protection ◽  
Coating Application ◽  
High Performing ◽  
Wide Range ◽  
Application Techniques ◽  
New Generation

AbstractGraphene-based coating is an emerging field that focuses on developing advanced coatings by exploiting new generation materials with superior properties. Researchers are striving to develop coatings that are cost-effective, easy to prepare and highly effective by integrating graphene with a wide range of suitable materials for surface protection applications. In this critical review, different types of high performing graphene-based polymer composite coatings have been described for anticorrosion application. An in-depth survey on methods of preparation, coating application techniques and their influence on the corrosion behavior of coatings is presented briefly. Newly developed strategies to enhance the protection efficiency of graphene-polymer matrix coatings are also covered concisely. The authors hope that this review will assist prospective academicians and researchers in developing novel highly efficient graphene-based anticorrosion composite coatings for industrial applications.

2D Color-Intensity Representation of Ultrasonic Thickness Gauge Measurements

2020 ◽  
pp. 1192-1198
Author(s):  
M.S. Mohammad ◽  
Tibebe Tesfaye ◽  
Kim Ki-Seong
Keyword(s):  
Cost Effective ◽  
The Other ◽  
Thickness Gauge ◽  
Color Intensity ◽  
Digital Readout ◽  
Flat Surfaces ◽  
Video Cameras ◽  
Wide Range ◽  
Cost Effective Alternative ◽  
Ultrasonic Thickness

Ultrasonic thickness gauges are easy to operate and reliable, and can be used to measure a wide range of thicknesses and inspect all engineering materials. Supplementing the simple ultrasonic thickness gauges that present results in either a digital readout or as an A-scan with systems that enable correlating the measured values to their positions on the inspected surface to produce a two-dimensional (2D) thickness representation can extend their benefits and provide a cost-effective alternative to expensive advanced C-scan machines. In previous work, the authors introduced a system for the positioning and mapping of the values measured by the ultrasonic thickness gauges and flaw detectors (Tesfaye et al. 2019). The system is an alternative to the systems that use mechanical scanners, encoders, and sophisticated UT machines. It used a camera to record the probe’s movement and a projected laser grid obtained by a laser pattern generator to locate the probe on the inspected surface. In this paper, a novel system is proposed to be applied to flat surfaces, in addition to overcoming the other limitations posed due to the use of the laser projection. The proposed system uses two video cameras, one to monitor the probe’s movement on the inspected surface and the other to capture the corresponding digital readout of the thickness gauge. The acquired images of the probe’s position and thickness gauge readout are processed to plot the measured data in a 2D color-coded map. The system is meant to be simpler and more effective than the previous development.

The Future of Plasma-Based Surface Engineering Techniques in Tribology (Keynote)

2005 ◽  
Author(s):  
Allan Matthews ◽  
Adrian Leyland
Keyword(s):  
Surface Engineering ◽  
Performance Enhancement ◽  
Bulk Material ◽  
Cost Savings ◽  
Cost Effective ◽  
Ceramic Coatings ◽  
Performance Improvements ◽  
Treatment Techniques ◽  
Wide Range ◽  
Macro Scale

Over the past twenty years or so, there have been major steps forward both in the understanding of tribological mechanisms and in the development of new coating and treatment techniques to better “engineer” surfaces to achieve reductions in wear and friction. Particularly in the coatings tribology field, improved techniques and theories which enable us to study and understand the mechanisms occurring at the “nano”, “micro” and “macro” scale have allowed considerable progress to be made in (for example) understanding contact mechanisms and the influence of “third bodies” [1–5]. Over the same period, we have seen the emergence of the discipline which we now call “Surface Engineering”, by which, ideally, a bulk material (the ‘substrate’) and a coating are combined in a way that provides a cost-effective performance enhancement of which neither would be capable without the presence of the other. It is probably fair to say that the emergence and recognition of Surface Engineering as a field in its own right has been driven largely by the availability of “plasma”-based coating and treatment processes, which can provide surface properties which were previously unachievable. In particular, plasma-assisted (PA) physical vapour deposition (PVD) techniques, allowing wear-resistant ceramic thin films such as titanium nitride (TiN) to be deposited on a wide range of industrial tooling, gave a step-change in industrial productivity and manufactured product quality, and caught the attention of engineers due to the remarkable cost savings and performance improvements obtained. Subsequently, so-called 2nd- and 3rd-generation ceramic coatings (with multilayered or nanocomposite structures) have recently been developed [6–9], to further extend tool performance — the objective typically being to increase coating hardness further, or extend hardness capabilities to higher temperatures.

scholarly journals Gamma models for estimating the odds ratio for a skewed biomarker measured in pools and subject to errors

Biostatistics ◽  
2019 ◽  
Author(s):  
Dane R Van Domelen ◽  
Emily M Mitchell ◽  
Neil J Perkins ◽  
Enrique F Schisterman ◽  
Amita K Manatunga ◽  
...  
Keyword(s):  
Odds Ratio ◽  
Adjusted Odds Ratio ◽  
Lower Cost ◽  
Cost Effective ◽  
Ratio Estimation ◽  
Statistical Efficiency ◽  
Function Model ◽  
Processing Error ◽  
Wide Range ◽  
Pooled Samples

SUMMARYMeasuring a biomarker in pooled samples from multiple cases or controls can lead to cost-effective estimation of a covariate-adjusted odds ratio, particularly for expensive assays. But pooled measurements may be affected by assay-related measurement error (ME) and/or pooling-related processing error (PE), which can induce bias if ignored. Building on recently developed methods for a normal biomarker subject to additive errors, we present two related estimators for a right-skewed biomarker subject to multiplicative errors: one based on logistic regression and the other based on a Gamma discriminant function model. Applied to a reproductive health dataset with a right-skewed cytokine measured in pools of size 1 and 2, both methods suggest no association with spontaneous abortion. The fitted models indicate little ME but fairly severe PE, the latter of which is much too large to ignore. Simulations mimicking these data with a non-unity odds ratio confirm validity of the estimators and illustrate how PE can detract from pooling-related gains in statistical efficiency. These methods address a key issue associated with the homogeneous pools study design and should facilitate valid odds ratio estimation at a lower cost in a wide range of scenarios.

scholarly journals Applicability of Honey on Silkworms (Bombyx mori) and Quality Improvement of Its Biomaterials

2021 ◽  
Vol 11 (10) ◽  
pp. 4613
Author(s):  
Gabriela-Maria Baci ◽  
Alexandra-Antonia Cucu ◽  
Adela Ramona Moise ◽  
Daniel Severus Dezmirean
Keyword(s):  
Quality Improvement ◽  
Bombyx Mori ◽  
Human Health ◽  
Recombinant Proteins ◽  
Therapeutic Agent ◽  
Life Sciences ◽  
Model Organism ◽  
Medical Field ◽  
Wide Range ◽  
Ancient Times

Since ancient times, honey has been considered one of the most illustrious and esteemed natural products. Honey plays two key roles; specifically, it is an appreciated nutritional product, and also exhibits a wide range of beneficial properties for human health as a therapeutic agent. Furthermore, it has been shown that honey has valuable effects on the biological and physiological features of mulberry silkworms (Bombyx mori). Bombyx mori exhibits importance not only for the economy, but it also serves as an important biotechnological bioreactor for the production of recombinant proteins that have a great impact in the medical field and beyond. It also represents an important model organism for life sciences. In view of the fact that silk fibroin serves as a natural biopolymer that displays high biocompatibility with human organisms and due to honey’s various and remarkable properties for human health, the two elements are currently used together in order to develop ideal biomaterials for a wide range of purposes. In this review, by discussing the applicability of honey on Bombyx mori and beyond, the importance of honey for life sciences and related fields is spotlighted.

scholarly journals The Impact of Initial Conditions in N-Body Simulations of Debris Discs

2015 ◽  
Vol 32 ◽  
Author(s):  
E. Thilliez ◽  
S. T. Maddison
Keyword(s):  
Numerical Simulations ◽  
Initial Conditions ◽  
Parent Body ◽  
Dust Trapping ◽  
Physical Context ◽  
Disc Width ◽  
Wide Range ◽  
Belt Width ◽  
New Generation ◽  
The Impact

AbstractNumerical simulations are a crucial tool to understand the relationship between debris discs and planetary companions. As debris disc observations are now reaching unprecedented levels of precision over a wide range of wavelengths, an appropriate level of accuracy and consistency is required in numerical simulations to confidently interpret this new generation of observations. However, simulations throughout the literature have been conducted with various initial conditions often with little or no justification. In this paper, we aim to study the dependence on the initial conditions of N-body simulations modelling the interaction between a massive and eccentric planet on an exterior debris disc. To achieve this, we first classify three broad approaches used in the literature and provide some physical context for when each category should be used. We then run a series of N-body simulations, that include radiation forces acting on small grains, with varying initial conditions across the three categories. We test the influence of the initial parent body belt width, eccentricity, and alignment with the planet on the resulting debris disc structure and compare the final peak emission location, disc width and offset of synthetic disc images produced with a radiative transfer code. We also track the evolution of the forced eccentricity of the dust grains induced by the planet, as well as resonance dust trapping. We find that an initially broad parent body belt always results in a broader debris disc than an initially narrow parent body belt. While simulations with a parent body belt with low initial eccentricity (e ~ 0) and high initial eccentricity (0 < e < 0.3) resulted in similar broad discs, we find that purely secular forced initial conditions, where the initial disc eccentricity is set to the forced value and the disc is aligned with the planet, always result in a narrower disc. We conclude that broad debris discs can be modelled by using either a dynamically cold or dynamically warm parent belt, while in contrast eccentric narrow debris rings are reproduced using a secularly forced parent body belt.

scholarly journals Review of Functional Treatments for Modified Wood

Coatings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 327
Author(s):  
Morwenna J. Spear ◽  
Simon F. Curling ◽  
Athanasios Dimitriou ◽  
Graham A. Ormondroyd
Keyword(s):  
High Performance ◽  
Responsive Materials ◽  
Wood Modification ◽  
Wide Range ◽  
Natural Wood ◽  
Impregnation Modification ◽  
New Applications ◽  
New Generation ◽  
Dimensional Instability ◽  
Modified Wood

Wood modification is now widely recognized as offering enhanced properties of wood and overcoming issues such as dimensional instability and biodegradability which affect natural wood. Typical wood modification systems use chemical modification, impregnation modification or thermal modification, and these vary in the properties achieved. As control and understanding of the wood modification systems has progressed, further opportunities have arisen to add extra functionalities to the modified wood. These include UV stabilisation, fire retardancy, or enhanced suitability for paints and coatings. Thus, wood may become a multi-functional material through a series of modifications, treatments or reactions, to create a high-performance material with previously impossible properties. In this paper we review systems that combine the well-established wood modification procedures with secondary techniques or modifications to deliver emerging technologies with multi-functionality. The new applications targeted using this additional functionality are diverse and range from increased electrical conductivity, creation of sensors or responsive materials, improvement of wellbeing in the built environment, and enhanced fire and flame protection. We identified two parallel and connected themes: (1) the functionalisation of modified timber and (2) the modification of timber to provide (multi)-functionality. A wide range of nanotechnology concepts have been harnessed by this new generation of wood modifications and wood treatments. As this field is rapidly expanding, we also include within the review trends from current research in order to gauge the state of the art, and likely direction of travel of the industry.

scholarly journals Sporulation in solventogenic and acetogenic clostridia

2021 ◽  
Author(s):  
Mamou Diallo ◽  
Servé W. M. Kengen ◽  
Ana M. López-Contreras
Keyword(s):  
Current Knowledge ◽  
Carbon Sources ◽  
Cost Effective ◽  
Biotechnological Production ◽  
Key Points ◽  
Wide Range ◽  
Potential Applications ◽  
A Cell ◽  
Sporulation Initiation ◽  
Solventogenic Clostridia

AbstractThe Clostridium genus harbors compelling organisms for biotechnological production processes; while acetogenic clostridia can fix C1-compounds to produce acetate and ethanol, solventogenic clostridia can utilize a wide range of carbon sources to produce commercially valuable carboxylic acids, alcohols, and ketones by fermentation. Despite their potential, the conversion by these bacteria of carbohydrates or C1 compounds to alcohols is not cost-effective enough to result in economically viable processes. Engineering solventogenic clostridia by impairing sporulation is one of the investigated approaches to improve solvent productivity. Sporulation is a cell differentiation process triggered in bacteria in response to exposure to environmental stressors. The generated spores are metabolically inactive but resistant to harsh conditions (UV, chemicals, heat, oxygen). In Firmicutes, sporulation has been mainly studied in bacilli and pathogenic clostridia, and our knowledge of sporulation in solvent-producing or acetogenic clostridia is limited. Still, sporulation is an integral part of the cellular physiology of clostridia; thus, understanding the regulation of sporulation and its connection to solvent production may give clues to improve the performance of solventogenic clostridia. This review aims to provide an overview of the triggers, characteristics, and regulatory mechanism of sporulation in solventogenic clostridia. Those are further compared to the current knowledge on sporulation in the industrially relevant acetogenic clostridia. Finally, the potential applications of spores for process improvement are discussed.Key Points• The regulatory network governing sporulation initiation varies in solventogenic clostridia.• Media composition and cell density are the main triggers of sporulation.• Spores can be used to improve the fermentation process.

Host-vector systems

1989 ◽  
Vol 324 (1224) ◽  
pp. 477-485 ◽  
Keyword(s):  
Genetic Manipulation ◽  
Pharmaceutical Products ◽  
Host Cells ◽  
Animal Cells ◽  
Vector Systems ◽  
Wide Range ◽  
Novel Host ◽  
Basic Concepts ◽  
Foreign Genes ◽  
New Generation

In 1980 it was only possible to express foreign genes in bacteria and a few easily cultured animal cells. During the subsequent eight years specialized vectors have been developed to allow the genetic manipulation of a wide range of both prokaryotes and eukaryotes. One of the major goals of biotechnology in 1980 was to use host cells as ‘factories’ for the production of proteins that were only available in minute quantities from natural sources. This has already lead to a new generation of pharmaceutical products. Advances in our understanding of host-vector systems have defined new goals. The basic concepts of expression vector design will be illustrated. Some of the new goals are discussed with particular reference to the exploitation of novel host-vector systems to develop vaccines and anti-viral agents against AIDS.

Sign in / Sign up

Export Citation Format

Share Document