scholarly journals PENGARUH KOMPOSISI SEKAM PADI TERHADAP PARAMETER FISIS BRIKET TEMPURUNG KELAPA

2018 ◽  
Vol 3 (1) ◽  
pp. 37-42
Author(s):  
Maria Lurumutin Umrisu ◽  
Redi K. Pingak ◽  
Albert Zicko Johannes
Keyword(s):  
Water Content ◽  
Rice Husk ◽  
Ash Content ◽  
The Other ◽  
Coconut Shell ◽  
Thickness Variation ◽  
Physical Parameters ◽  
Better Than

ABSTRAK Briket bioarang merupakan salah satu bahan bakar yang berasal dari biomassa. Biomassa yang digunakan dalam penelitian ini adalah tempurung kelapa dan sekam padi. Penelitian ini bertujuan untuk mengetahui pengaruh variasi komposisi sekam padi dan variasi perekat terhadap parameter fisis briket tempurung kelapa. Hasil penelitian ini menunjukkan nilai densitas, nilai kadar air, nilai porositas dan nilai kadar abu, secara berturut-turut berkisar antara (0.69  - 1.12 ), (3,33% - 7,57%.), (16,66% - 31,88%.), (38,46% - 66,66%.). Analisis menunjukkan bahwa secara umum, komposisi sekam padi berbanding terbalik dengan nilai densitas, nilai kadar air dan nilai kadar abu briket dan berbanding lurus dengan nilai porositas briket. Berdasarkan nilai densitas, nilai kadar air, dan nilai kadar abu briket, dapat disimpulkan bahwa dalam penelitian ini briket dengan komposisi 40% tempurung kelapa dan 60% sekam padi memiliki kualitas yang lebih baik dibandingkan dengan komposisi lainnya. Kata Kunci : Briket, Tempurung kelapa, Sekam padi, Densitas, Kadar air, Porositas dan Kadar abu. ABSTRACT Bio-briquette is one of the fuels that comes from biomass. The biomass used in this research is coconut shell and rice husk. The aims of this research are to know the influence of variation of rice husk composition and thickness variation on physical parameters of shell briquettes. The results of this study indicate that the density, moisture value, porosity and ash values, respectively ranged between (0.69  - 1.12 ), (3,33% - 7,57%.), (16,66% - 31,88%.), (38,46% - 66,66%.). The analysis showed that in general, the composittion of rice husk is inversely proportional to density, moisture value and briquette ash value, otherwise the composition of rice husk is directly proportional briquette porosity value. Based on density value, mositure value and ash value it can be concluded that in this research the quality  of briquettes with composition 40% coconut shell and 60% rice husk is better than the other compositions. Keywords: Briquette, Coconut shell, Rice husk, Density, Water content, Porosity and Ash content.

scholarly journals Analisis mutu briket arang dari limbah biomassa campuran kulit kopi dan tempurung kelapa dengan perekat tepung tapioka

2019 ◽  
Vol 4 (02) ◽  
pp. 110-120
Author(s):  
Bagus Setyawan ◽  
Rosiana Ulfa
Keyword(s):  
Water Content ◽  
Quality Standards ◽  
Quality Standard ◽  
Ash Content ◽  
Coconut Shell ◽  
National Standard ◽  
Biomass Waste ◽  
Heating Value ◽  
Tapioca Flour

Plantation wastes such as coffee skins and coconut shells in Indonesia have not been utilized optimally. Waste can be utilized for the manufacture of charcoal briquettes as an alternative fuel. The purpose of this study was to determine the quality of charcoal briquettes from biomass waste mixed with coffee skin and coconut shell with tapioca flour adhesive. This research is a type of laboratory experimental research. The study used a Completely Randomized Design (CRD) with 3 replications. Testing the quality of charcoal briquettes includes tests of water content, ash content, combustion rate, and heating value. The research data will be compared with the International charcoal briquette quality standards and the Indonesian National Standard (INS). The results showed that the water content and an ash content of the charcoal briquettes were still below the international charcoal briquette quality standards and INS. However, the heating value of this charcoal briquette is surpass the INS quality standard. The conclusion of the research is the quality of the charcoal briquettes from the waste of biomass of coffee husk and coconut shell with tapioca flour recorder in the aspects of water content and ash content is still below the international quality standard and SNI, but in the aspect of the heat value of the charcoal briquette the research results are above the SNI quality standard.

scholarly journals Charcoal fuel from the mixture of coconut shell waste and coal: effect of carbonization temperature and the amount of coal mass in the mixture

2021 ◽  
Vol 328 ◽  
pp. 01019
Author(s):  
Siswanto ◽  
Kindriari Nurma Wahyusi ◽  
Renova Panjaitan
Keyword(s):  
Water Content ◽  
Raw Materials ◽  
Calorific Value ◽  
Ash Content ◽  
Carbonization Temperature ◽  
Coal Mass ◽  
Coconut Shell ◽  
Shell Waste ◽  
Temperature Parameter

Contributing to the solution-finding for the availability of dwindling fossil energy, this study produced charcoal fuel from a biomass mixture of coconut shell waste and coal, using adhesive from meranti wood. The research was conducted by observing the effect of the carbonization temperature parameters and the amount of coal used in the mixture on the quality of charcoal fuel. The quality was evaluated on the calorific value, water content, and ash content. In addition, the data were analyzed mathematically using the response surface methodology to determine the interaction effect of independent variables on the response and to obtain the best conditions for producing charcoal fuel with the desired quality in the variable range of carbonization temperature of 300oC-500oC and coal mass in the range 10-30 grams. The results revealed that the temperature parameter had a significant effect on the calorific value, water content, and ash content. While the amount of coal mass did not significantly affect the calorific value and ash content but significantly affected the water content of charcoal fuel. The carbonization temperature and the amount of coal in the mixture of raw materials suggested were 409.625oCand10gr.

Effects of over Heat and Casting Speed on Quality of GCr15 Billet

2014 ◽  
Vol 997 ◽  
pp. 534-537 ◽  
Author(s):  
Qi Wei Zuo ◽  
Xia An ◽  
Jing Bo Yang ◽  
Da Qiang Cang
Keyword(s):  
Casting Speed ◽  
The Other ◽  
Steel Making ◽  
Average Grade ◽  
Upset Forging ◽  
C 30 ◽  
Better Than ◽  
Center Porosity

In order to improve the quality of the billets, the whole test proceedings by the comparison of the two casting conditions which one is over heat 20°C-30°C under casting speed 0.4m/min-0.6m/min and the other is over heat 10°C-15 °C under casting speed 1.3m/min-1.6m/min are checked during the produce process of GCr15 in some domestic steel-making plant. The results show that the average grade of general porosity decreases 1.0, the average grade of center porosity down 0.5, the average grade of center segregation fall 0.5 and the samples tested in hot upset forging perform better than before. According to the results, the latter is determined to be accepted.

scholarly journals VARIAN IKAN NIKE (Awaous melanocephalus) DAN IKAN CAKALANG (Katsuwonus pelamis) TERHADAP MUTU KERUPUK

2018 ◽  
Vol 5 (2) ◽  
pp. 44
Author(s):  
Desi Arisanti
Keyword(s):  
Water Content ◽  
Ash Content ◽  
Nutritional Content ◽  
Katsuwonus Pelamis ◽  
Hedonic Method ◽  
Average Water ◽  
The Mean ◽  
Processed Form ◽  
Current Utilization

the current utilization of nike fish and tuna is still limited to fresh condition. Crackers are a very popular food by all levels of society. Utilization of nike fish and tuna in processed form with longer shelf life has not been done. Nutritional content of both types of fish is a reason in the selection as a basic ingredient in making crackers. The purpose of this research is to know the formulation of nike fish and tuna to the quality of crackers. The observation parameters in this study are the level of favorite or hedonic method, water content, ash content, bloom and texture analizer. The results showed that the average water content of nike fish crackers and skipjack fish from treatment A1 3.3%, treatment A2 3.29%, A3 3.77%. Mean of ash content at treatment of A1 1,97%, treatment of A2 1,55%, treatment of A3 1,58%. The average of A1 is 283,54%, A2 242,75%, A3 182,23%. and the mean of analyzer analyzer test at A1 1185,6%, A2 708,9%, and A3 783,83%. Based on the results and the discussion that has been done on the quality of crackers, it can be concluded that the best formula and liked by the panelists is formula A1

scholarly journals The cyclone separator application on physicochemical characterization of coconut shell-liquid smoke grade C

2020 ◽  
Vol 3 (2) ◽  
pp. 68-74
Author(s):  
Angky Wahyu Putranto ◽  
Firda Puspaningarum ◽  
Sukardi Sukardi
Keyword(s):  
Total Yield ◽  
Physicochemical Characterization ◽  
Common Method ◽  
Coconut Shell ◽  
Physical Parameters ◽  
Cyclone Separator ◽  
Liquid Smoke ◽  
Direct Condensation

The further processing of coconut shell pyrolysis into liquid smoke has been developed in recent years. However, the common technology by directly condensing the smoke has many impurity compounds which decreases the yield of liquid smoke produced. Hence, in this study the cyclone separator was applied to increase the quality of physicochemical content in coconut shell-liquid smoke (CS-LS) grade C. The physical parameters analyzed were yield, pH, density and color. The chemical parameters was analyzed by GC-MS. The result showed that CS-LS processing with cyclone separator was able to increase the total yield into 3.33%, with better color, pH and density compared to the CS-LS produced using common method (direct condensation). The application of cyclone separator was also able to increase the phenolic compounds (97%), alcoholic compounds (92%), cycloalkene compounds (91%) and also decreased the benzoic acid, carbonyl and ester up to 100% compared with common method for CS-LS grade C production.

scholarly journals Analysis of the Quality of Mixed Coconut Shell Waste Briquettes with Various Biomass Additives as Alternative Fuels

2021 ◽  
Vol 4 (2) ◽  
Author(s):  
Yusraida Khairani Dalimunthe ◽  
Sugiatmo Kasmungin ◽  
Listiana Satiawati ◽  
Thariq Madani ◽  
Teuku Ananda Rizky
Keyword(s):  
Moisture Content ◽  
Calorific Value ◽  
Volatile Matter ◽  
Matter Content ◽  
Ash Content ◽  
Coconut Shell ◽  
Bamboo Charcoal ◽  
A Value ◽  
Shell Waste

The purpose of this study was to see the best quality of briquettes from the main ingredient of coconut shell waste<br />with various biomass additives to see the calorific value, moisture content, ash content, and volatile matter<br />content of the biomass mixture. Furthermore, further research will be carried out specifically to see the quality of<br />briquettes from a mixture of coconut shell waste and sawdust. The method used in this research is to conduct a<br />literature study of various literature related to briquettes from coconut shell waste mixed with various additives<br />specifically and then look at the best quality briquettes produced from these various pieces of literature. As for<br />what is determined as the control variable of this study is coconut shell waste and as an independent variable,<br />namely coffee skin waste, rice husks, water hyacinth, Bintaro fruit, segon wood sawdust, coconut husk, durian<br />skin, bamboo charcoal, areca nut skin, and leather waste. sago with a certain composition. Furthermore, this<br />paper also describes the stages of making briquettes from coconut shell waste and sawdust for further testing of<br />the calorific value, moisture content, ash content, volatile matter content on a laboratory scale for further<br />research. From various literatures, it was found that the highest calorific value was obtained from a mixture of<br />coconut shell waste and bamboo charcoal with a value of 7110.7288 cal / gr and the lowest calorific value was<br />obtained from a mixture of coconut shell waste and sago shell waste with a value of 114 cal / gr, then for the value<br />The highest water content was obtained from a mixture of coconut shell waste and rice husk with a value of<br />37.70% and the lowest water content value was obtained from a mixture of coconut shell waste 3.80%, then for the<br />highest ash content value was obtained from a mixture of coconut shell waste and coffee skin with a value of<br />20.862% and for the lowest ash content value obtained from a mixture of coconut shell and Bintaro fruit waste,<br />namely 2%, and for the highest volatile matter content value obtained from a mixture of coconut shell and coconut<br />husk waste with a value of 33.45% and for the value of volatile matter levels The lowest was obtained from a<br />mixture of coconut shell waste and sago skin waste with a value of 33 , 45%.

scholarly journals PERBANDINGAN KUALITAS PRODUK DAN MINAT MENABUNG PADA LPD DESA ADAT TAJUN DENGAN DESA ADAT TEGAL

2020 ◽  
Vol 4 (1) ◽  
pp. 59-67
Author(s):  
Eka Swarnadi Luh ◽  
Ketut Budi Susrusa ◽  
Ida Ayu Listia Dewi
Keyword(s):  
Product Quality ◽  
Financial Institutions ◽  
Rapid Development ◽  
Research Data ◽  
The Other ◽  
Physical Evidence ◽  
Significant Difference ◽  
The Difference ◽  
Better Than

LPDs are non-bank financial institutions that are regulated and approved by the Regional Regulations of the Province of Bali. The management of LPD is fully handed over to the relevant Pakraman village. In line with the rapid development of LPDs, it turns out that on the other hand it shows diverse performance, so that LPDs need to pay attention to the level of product quality and customer interest in the products offered.            The purpose of the study was to determine the comparison of product quality and interest in saving at the Tajun Traditional Village LPD with the Traditional Village of Tegal. The number of samples from Tajun Adat Village LPD was 98 people and the LPD of Tegal Traditional Village was 84 people. The research data were analyzed by the Mann-Whitney Test. The results showed that there was a significant difference between the quality of the products of the Adat Village of Tajun LPD and the Traditional Village of Tegal. This difference is indicated by indicators of physical evidence, reliability, responsiveness and empathy. The product quality of Tajun Adat Village's LPD is better than the traditional village of Tegal. There is a significant difference between the interest in saving the traditional village of Tajun LPD and the traditional village of Tegal. The difference is in the indicator of confidence. Interest in Saving Tajun Indigenous Village LPD is higher than the Traditional Village of Tegal.

scholarly journals PEMBERIAN STIMULAN PADA BIDANG SADAP DALAM MEMPENGARUHI PRODUKSI DAN KUALITAS LATEKS TANAMAN KARET (Hevea brasiliensis (Muell. Arg.)

2019 ◽  
Vol 4 (1) ◽  
pp. 38
Author(s):  
Hayata Hayata ◽  
Yulistiati Nengsih ◽  
Rahmanto Wibowo
Keyword(s):  
Quality Control ◽  
Ash Content ◽  
The Other ◽  
Rubber Content ◽  
Randomized Design ◽  
Treatment Factor ◽  
Completely Randomized Design ◽  
Four Levels ◽  
Latex Production

Production increasing of latex on rubber plants can be increased by using a stimulants. One of it  is Vicar 10 SL. The purpose of this study was to find out the effect of Vicar 10 SL on the production and quality of latex. This research was carried out in the Kasang Parit Village, Sekernan District, Muaro Jambi Regency, and the Goods Quality Control and Certification Center on Industry and trade department   in Jambi Province. The study was conducted in July to August 2017. The design used was a completely randomized design with one treatment factor as the Vicar 10 SL application with four levels of treatment, namely; Without treatment (V0/control), 1 ml/Tree (V1), 2 ml/tree (V2), 3 ml/tree (V3). There were 4 times  repeatation on each treatment. Using  fingers, a Vicar 10 SL solution was applied to the tapping groove which was adjusted to the treatment, and allowed to keep it 24 hours. Tapping is done in the next morning, by following the grooves and be stored in a cup and left until the latex stoped dripping. Vicar was given once a week during 30 days. Tapping was done 3 times a week. The variables observed were latex production (gram/tree/day), dry rubber content (%), latex ash content (%), and latex dirt content (%). Vicar giving 10 SL in the tapping site with a dose of 2 ml / tree gave the highest yield of latex production (93.38 grams / tree / day) and dry rubber content (75.50%) and was significantly different compared to the other treatments. Vicar giving 10 SL in tapping site had no significant effect on latex dirt content and latex ash contentKeywords: Latex, stimulant, product and quality Abstrak Peningkatan produksi lateks pada tanaman karet dapat ditingkatkan dengan menggunakan stimulan. Salah satu pemakaian yang digunakan adalah Vikar 10 SL. Tujuan penelitian ini adalah untuk megetahui penggunaan stimulan pada bidang sadap dalam mempengaruhi produksi dan kualitas lateks. Penelitian ini dilakukan di Desa kasang Parit Kecamatan Sekernan Kabupaten Muaro Jambi, dan Balai Pengujian dan Sertifikasi Mutu Barang (BPSMB) Disperindag Propinsi Jambi. Penelitian dilakukan pada bulan Juli sampai dengan Agustus 2017. Rancangan yang digunakan adalah Rancangan Acak Lengkap dengan satu faktor perlakuan pemberian stimulan (Vikar 10 SL) dengan empat taraf perlakuan  yaitu; Tanpa perlakuan (V0/kontrol),  1 ml/ Pohon (V1),  2 ml/pohon (V2), 3 ml/pohon  (V3). Setiap perlakuan diulang sebanyak 4 kali. Dengan menggunakan jari dioleskan larutan Vikar 10 SL pada alur sadap  yang disesuaikan dengan perlakuan, dan didiamkan selama 24 jam. Penyadapan dilakukan pada pagi hari esoknya, dengan mengikuti alur torehan dan ditampung dalam cawan dan dibiarkan sampai lateks berhenti menetes. Pemberian Vikar dilakukan sekali 7 hari selama 30 hari. Penyadapan dilakukan  3 kali dalam seminggu. Peubah yang diamati adalah produksi lateks (gram/pohon/hari)), kadar karet kering (%), kadar abu lateks (%), kadar kotoran lateks (%). Pemberian stimulan (Vikar 10 SL) pada bidang sadap dengan dosis 2 ml/pohon memberikan hasil yang tertinggi terhadap produksi lateks 93,38 gram/pohon/hari dan kadar karet kering 75,50 % dan berbeda nyata bila dibandingkan dengan perlakuan lainnya. Pemberian stimulan (Vikar 10 SL) pada bidang sadap berpengaruh tidak nyata terhadap kotoran lateks dan kadar abu lateksKata kunci :Lateks, stimulan, produksi dan kualitas

Descriptors and Indicators of the Acoustic Environment in Andorra and Escaldes-Engordany

Proceedings ◽  
2019 ◽  
Vol 44 (1) ◽  
pp. 6
Author(s):  
Rosa Alsina-Pagès ◽  
Laura Echevarría-Garuz
Keyword(s):  
Quality Of Life ◽  
Noise Pollution ◽  
The Other ◽  
Physical Parameters ◽  
Noise Sources ◽  
Acoustic Environment ◽  
Audio Recordings ◽  
Using Data ◽  
The City

Noise pollution is one of the growing issues in our cities. Every day the streets are full of vehicles of all kinds and works using noisy machinery; it seems difficult to find a quiet area that away from this acoustic environment. Presently, multiple studies are being carried out in the area of engineering in order to be able to attenuate the causes of this noise pollution, in order to improve citizens’ lives. Nevertheless, are cars the only cause of the noise in the city? Are there other noise sources that may affect the quality of life of the citizens? What defines a city as heavily polluted or not? Maybe it can be assumed that truck noise is annoying and that it contributes to noise pollution, while the sound of birds does not and it is pleasant for people. This paper pretends to analyze the physical parameters that allow us to define if any sound causes annoyance, taking into account its acoustic environment. To do this, a specific case will be analysed; we will study three locations measured in Andorra La Vella and Escaldes-Engordany. The audio recordings will be studied deeply, and compared one to the other using data from two different days and all day schedule. We will finally evaluate the annoyance of each location using parameters such as loudness, sharpness and roughness, and taking into account both day and time, as well as giving details about the several types of sound labelled in each recording.

Sign in / Sign up

Export Citation Format

Share Document