scholarly journals FLEXIBLE ARCHITECTURAL ENVIRONMENT. SYSTEM ANALYSIS. PROCESS ASPECT

2020 ◽  
pp. 505-509
Author(s):  
V.S. Semenov ◽  
R.Sh. Akbaraliev
Keyword(s):  
Environmental Factors ◽  
System Analysis ◽  
Point Of View ◽  
Structural Elements ◽  
Functional Level ◽  
Analysis Process ◽  
The Aesthetic ◽  
Procedural Aspect ◽  
Color And Light ◽  
Internal Connections

This article examines a flexible architectural environment as a system that can change itsnparameters under the influence of various factors. These changes are motivated by the development or adaptation of the system to external environmental factors. A flexible architectural environment is considered as a system from the point of view of the procedural aspect, which determines changes in the system at various levels, as well as changes in the connections between the internal elements of the system. In this aspect, the internal elements of the system can be identified, with the help of which the flexibility of the architectural environment is achieved. Three levels of change and development of the system are considered in detail: material, functional, and aesthetic. The material and functional level involves changes in the system, which are achieved by structural elements and equipment. The aesthetic level implies changes in the system with elements such as color and light, materials, textures and decor. These groups of elements of the system undergo changes in internal connections, which are formal and aesthetic in nature.

scholarly journals Experimental Measurement of Absorption Coefficients for Effective Erbium-Doping Concentration to Optimize Few-Mode Erbium-Doped Fiber Amplifiers with Low Differential Mode Gain

Photonics ◽  
2021 ◽  
Vol 8 (6) ◽  
pp. 185
Author(s):  
Yan Xu ◽  
Baojian Wu ◽  
Xinrui Jiang ◽  
Haomiao Guo ◽  
Feng Wen
Keyword(s):  
Doping Concentration ◽  
Point Of View ◽  
Fiber Amplifiers ◽  
Efficient Design ◽  
Absorption Loss ◽  
Differential Mode ◽  
Transmission Method ◽  
Modal Gain ◽  
Analysis Process ◽  
Erbium Doped

According to the analytical expression for modal gain of few-mode erbium-doped fiber amplifiers (FM-EDFAs), we propose a method of measuring the absorption loss coefficients of few-mode signals in few-mode erbium-doped fibers (FM-EDFs) by extrapolating the mode–gain curve dependent on the average population inversion. The absorption loss coefficient of an FM-EDF was measured in our experimental platform and used to estimate the effective erbium-ion doping concentration. The feasibility of the extrapolation method was verified by simulation and comparison with the transmission method. Furthermore, the FM-EDFAs with high modal gain and low differential mode gain (DMG) could be optimized by adjusting the FM-EDF’s length and pump power. The analysis process presented here is very useful for the efficient design of FM-EDFAs from a practical point of view.

scholarly journals Edogawa Rampo’s short story Kagami Jigoku: A Structural Study

KIRYOKU ◽  
2020 ◽  
Vol 4 (1) ◽  
pp. 7-17
Author(s):  
Yuliani Rahmah
Keyword(s):  
Short Stories ◽  
Short Story ◽  
Japanese Society ◽  
Modern Technology ◽  
Point Of View ◽  
The Other ◽  
Cultural Aspects ◽  
Analysis Process ◽  
Structural Methods ◽  
Modern Era

The purpose of this research is to analyze the intrinsic elements found in the short story Kagami Jigoku by Edogawa Rampo. By using structural methods the analysis process  find out the intrinsic elements which builds  the Kagami Jikoku short story. As a result it is known that the Kagami Jikoku is a short story with a mystery theme as the hallmark of Rampo as its author. The characteristic of this short story can be seen from the theme which raised the unusual obsession problem of the main characters. With the first person point of view which tells in unusual way from the other short stories, the regression plot in Kagami Jikoku is able to tell the unique phenomenon of Japanese society and its modern technology through elements of place, time and socio-cultural aspects of Japanese society in the modern era

scholarly journals Remix in the age of ubiquitous remix

2021 ◽  
pp. 135485652199445
Author(s):  
Abby S. Waysdorf
Keyword(s):  
Point Of View ◽  
Archival Material ◽  
History Of ◽  
Accepted Part ◽  
The Media ◽  
Contemporary Media ◽  
The Aesthetic ◽  
The Way

What is remix today? No longer a controversy, no longer a buzzword, remix is both everywhere and nowhere in contemporary media. This article examines this situation, looking at what remix now means when it is, for the most part, just an accepted part of the media landscape. I argue that remix should be looked at from an ethnographic point of view, focused on how and why remixes are used. To that end, this article identifies three ways of conceptualizing remix, based on intention rather than content: the aesthetic, communicative, and conceptual forms. It explores the history of (talking about) remix, looking at the tension between seeing remix as a form of art and remix as a mode of ‘talking back’ to the media, and how those tensions can be resolved in looking at the different ways remix originated. Finally, it addresses what ubiquitous remix might mean for the way we think about archival material, and the challenges this brings for archives themselves. In this way, this article updates the study of remix for a time when remix is everywhere.

THE ROLE OF URBAN AESTHETICS ON ENHANCING VITALITY OF URBAN SPACES

2021 ◽  
pp. xx-xx
Keyword(s):  
Urban Design ◽  
Direct Consequence ◽  
Point Of View ◽  
Urban Spaces ◽  
Urban Setting ◽  
Aesthetic Quality ◽  
Aesthetic Design ◽  
Active Involvement ◽  
The Aesthetic

Several scholars have focused on the different approaches in designing convivial urban spaces, but literary evidence shows that the essence of aesthetic design in public urban spaces, by referring to the main dimensions involved in the shaping of urban vitality, has not been adequately researched. In this regard, this study, by hypothesizing that the quality of urban design leads to a vital urban environment, focuses on urban vitality from the aesthetic point of view. Thus, in using qualitative grounded theory as a main methodological tool and using a systematic review of the related literature as the main induction approach for collecting qualitative data, five main dimensions of urban vitality, which are necessary to attain a correlation with the aesthetic quality of urban design, were conceptualized. The study concludes that the aesthetic design of an urban setting has a direct effect on the active involvement of its users and that this, therefore, has a direct consequence on the level of public urban vitality, manifested. Integrating the complexity theory with the five main dimensions used for assessing urban vitality was suggested as a viable area for further research.

The Properties of Welded Joints Made by 6082-T6 Aluminium Alloy and their Behaviour under Cyclic Loading Conditions

2015 ◽  
Vol 812 ◽  
pp. 375-380 ◽  
Author(s):  
D. Pósalaky ◽  
János Lukács
Keyword(s):  
Cyclic Loading ◽  
Automotive Industry ◽  
Welded Joints ◽  
Structural Engineering ◽  
Physical Simulation ◽  
Base Material ◽  
Point Of View ◽  
Test Results ◽  
Structural Elements ◽  
Effective Use

The magnitude of different aluminium alloys, especially the ones with higher strength, are increasing in the structural engineering, not just the usual applications (like the aerospace industry) but more likely in the automotive industry. There are more assumptions of the effective use of aluminium; we should highlight two important factors, the technological and the applicability criterions. The technological criterion is the joining of structural elements, frequently with welding thus the technological criterion ultimately is the weldability. The assumption of applicability comes from the loading capability of these structures, which is typically cyclic loading so the key issue from the point of view of applicability is the resistance to fatigue. This article represents physical simulation and fatigue test results both on the base material and on the welded joints.

scholarly journals THE BODY IN THE HISTORY OF WESTERN EUROPEAN AND RUSSIAN THEATRE: CULTURAL VARIABILITY OF SHAME

Articult ◽  
2021 ◽  
pp. 19-31
Author(s):  
Leila F. Salimova ◽  
◽  
Keyword(s):  
Scientific Knowledge ◽  
Performing Arts ◽  
Point Of View ◽  
The Body ◽  
Ethical Aspect ◽  
Close Relationship ◽  
History Of ◽  
The Spectator ◽  
The Aesthetic ◽  
Considerable Body

Modern scientific knowledge approaches the study of the physical and aesthetic bodies with a considerable body of texts. However, on the territory of the theater, the body is still considered exclusively from the point of view of the actor's artistic tools. Theatrical physicality and the character of physical empathy in the theater are not limited to the boundaries of the performing arts, but exist in close relationship with the visual and empirical experience of the spectator, performer, and director. The aesthetic and ethical aspect of the attitude to the body in the history of theatrical art has repeatedly changed, including under the influence of changing cultural criteria of "shameful". The culmination of the demarcation of theatrical shame, it would seem, should be an act of pure art, independent of the moral restrictions of society. However, the experiments of modern theater continue to face archaic ethical views. The article attempts to understand the cultural variability of such a phenomenon as shame in its historical and cultural extent using examples from theater art from antiquity to the present day.

scholarly journals MYSTERY AS A META-GENRE IN THE DRAMA OF THE TWENTIETH CENTURY

2021 ◽  
pp. 18-26
Author(s):  
K. Oliinyk
Keyword(s):  
Twentieth Century ◽  
World Order ◽  
Semantic Content ◽  
Point Of View ◽  
Dramatic Works ◽  
Life And Death ◽  
The Matrix ◽  
General Feeling ◽  
The Aesthetic ◽  
Definition Of

The article examines the specificity of existence of the renewed mystery genre as a meta genre in the twentieth century. The main literary study views on the definition of ancient and medieval / Christian ritual mystery are analyzed. The beginning of the twentieth century was full of a general feeling of catastrophe and tragic hopelessness. In artistic terms, the consequence of this was the activation of Christian issues, motives, plots, religious genres (miracles, morality and mystery). The most universal from the point of view of the ideological message and content for the writers of the twentieth century. was the matrix of the medieval mystery, which retained the ritual basis in its primary structure. This made it possible for the multilevel organization of the action and the space for it. The genre of medieval mystery is being modified, it ceases to be a purely form of religious action and acquires the quality of a meta genre. There is a transition from the religious sphere to the secular one, and the aesthetic one is replacing the didactic load. Mystery begins to exist on the edge of genres as a synthetic formation, showing intentions to “help” other genres. A large number of dramatic works of the twentieth century. ("Forest Song" by Lesia Ukrainka, "Iconostasis of Ukraine" by Vіra Vovk) comes close to the mystery, using its archetypal components: the ideas of faith in the absolute beginning, governing the eternal rotation of life and death, world order and harmony, death and rebirth, transformations of the human soul, chosenness and initiation associated with trials, sacrifice, deepening into mysticism. Such works are a certain imitation with elements of mythological or religious subjects. So, the twentieth century, actualizes a certain involvement of the semantic content of dramas to the mysteries, bringing the mystery to the level of the meta genre.

scholarly journals USE OF ORGANIZATION AND ENGINEERING IN EVENT TOURISM

2020 ◽  
pp. 22-28
Author(s):  
Svitlana Tyshchenko ◽  
Taisiіa Chernyshova ◽  
Snizhana Mutasova
Keyword(s):  
System Analysis ◽  
Technical Support ◽  
Point Of View ◽  
Practical Significance ◽  
Wide Audience ◽  
Main Research ◽  
Goal Development ◽  
Effective System ◽  
Event Tourism ◽  
First Time

The article discusses the main problems of the implementation of event tourism in certain territories, which primarily include: short-term event; the scale of the event; placement in a natural area; lack of sufficient means of accommodation and services for tourists; style of events and the like. Goal. Development of an effective system of organizational and technical support for event tourism events. Methodology. The main research methods, in order to achieve the goal, are the analysis of engineering support, the classification of mobile homes for event tourism and the modeling of requirements for them based on the system analysis of event tourism technologies. Results. The organizational and technical support of event tourism activities proposed in the article will reduce the technogenic load on the local natural landscapes of natural areas in the places where event events are held. This will contribute to the formation of a higher culture, the style of their conduct, which will make it possible to undertake events of event tourism in regions that are even more attractive to a wide audience of tourists not only in our country, but also abroad. This method of organizational and technical support can also be used for holding rallies, forums, conferences and other events. Important for the success of the development of event tourism and the correct organization of organizational and engineering support is the formation of a calendar of events, which makes it possible to approach all future events in a planned manner, from the point of view of engineering and technical support, later will give its positive results. Scientific novelty. The current state of the use of mobile houses in event tourism on the territory of Ukraine is analyzed for the first time. For the first time, the calendar of the territory of the Stanishovskaya OTG of the Zhytomyr region was compiled for 2020-2021. Practical significance of the study lies in the fact that the compiled calendar of event tourism will be used by OTG "Stanishovskaya" in full and taking into account our recommendations regarding the holding of mass events.

scholarly journals A mathematical model for production routing of mechanical engineering products

2021 ◽  
Vol 25 (3) ◽  
pp. 332-341
Author(s):  
I. V. Fokin ◽  
A. N. Smirnov
Keyword(s):  
Mathematical Model ◽  
Mechanical Engineering ◽  
Complex Geometry ◽  
3D Models ◽  
Point Of View ◽  
Structural Elements ◽  
Production Environment ◽  
Automatic Mode ◽  
The Cost ◽  
Production Routing

The aim was to create a mathematical model describing the development of a production (shop-to-shop) routing of mechanical engineering products based on a 3D model and allowing the cost of the final product to be reduced. The developed mathematical model was simulated based on 3D models designed in the Siemens NX system, which were subsequently imported into the *stp format and recognized by a designed module written in the Phyton programming language. The factors of the production environment affecting the formation of the production routing of mechanical engineering products were determined. A diagram of the algorithm for the “constructive element - technological operation - means of technological equipment (equipment-tool)” relationship was developed. Based on the results of testing the developed mathematical model, the use of neural networks as a tool for the implementation and automation of the work was found advantageous as compared to the standard scheme of work of a process engineer when developing a production routing of mechanical engineering products. These advantages include a decrease in the time for the development of a routing and the cost of the final product. The developed model has a practical limitation consisting in a rather complex geometry of some structural elements of a unit, which impedes the development of an algorithm for recognizing their structure. The use of a neural network prototype in automatic mode is advisable for relatively simple parts (including a flange, hole, chamfer and rounding). However, since the number of simple units from the recognition point of view amounts to about 40% among the nomenclature of manufactured units, the reduction in the development time of the technological process in comparison with the conventional approach comprises only 10–25% of the total time of technological preparation.

Sign in / Sign up

Export Citation Format

Share Document