scholarly journals Low Cost Hardware Architecture of Fast Lifting Wavelet Transform for Image Compression

2019 ◽  
Vol 8 (3) ◽  
pp. 6504-6514
Keyword(s):  
Field Programmable Gate Array ◽  
High Speed ◽  
Critical Path ◽  
Low Cost ◽  
Lifting Wavelet Transform ◽  
Performance Requirements ◽  
Field Programmable ◽  
Hardware Architectures ◽  
Lifting Wavelet ◽  
Hardware Efficiency

In this work, the researchers have given a low-cost, multiplier-less design with latest DWT (2D lifting technology) for high-speed dual-Z scans. A single dimension parallele row, column processors and five transposing registers are the suggested architecture. Furthermore, a 4N timeline buffer is used to process 2D DWT images with NxN resolution. Flipping architecture is intended to decrease the critical path, replacing multipliers with shifting and adding logic. To reduce transposition and latency buffers, dual Z scanning technology is introduced. The proposed architecture is better for similar performance requirements than the existing hardware architectures. Verilog is defined as the suggested Design Register Transfer Logic (RTL) and is synthesized with Xilinx ISE 14.5. When synthesized with a better hardware efficiency for Xilinx Spartan 6 series field programmable gate array, the suggested architecture works at a frequency of 140.47 MHz.

scholarly journals Space-time trellis codes: Field programmable gate array approach

2020 ◽  
Vol 9 (3) ◽  
pp. 213
Author(s):  
Mallikarjuna Gowda C. P. ◽  
Raju Hajare
Keyword(s):  
Field Programmable Gate Array ◽  
High Speed ◽  
Low Cost ◽  
Digital Signal ◽  
Space Time ◽  
Trellis Codes ◽  
Software Environment ◽  
High Data ◽  
Field Programmable ◽  
Gate Array

This paper presents an implementation of Space-time Trellis Codes for 4-state on FPGA. To reach the very high data rates provided in STTC, a lot of expensive high-speed Digital Signal Processors (DSPs) should be employed for the real time applications, while it might not be affordable. This fact has motivated in designing dedicated hardware implementations using Field Programmable Gate Array (FPGA) with low cost and power consumption. The hardware device XC3S400, family Xilinx Spartan-3, and package PQ208 are used in this project, in which the STTC encoder and decoder utilizes maximum 10% and 22% as that of available device capacity respectively. The design has been simulated and synthesized successfully in Xilinx integrated software environment.

Based on FPGA Intelligent Physiological Parameters Acquisition

2013 ◽  
Vol 344 ◽  
pp. 107-110
Author(s):  
Shun Ren Hu ◽  
Ya Chen Gan ◽  
Ming Bao ◽  
Jing Wei Wang
Keyword(s):  
High Speed ◽  
Low Cost ◽  
Physiological Parameters ◽  
Sensor Data ◽  
Low Power Consumption ◽  
Physiological Signal ◽  
Pulse Sensor ◽  
Monitoring Applications ◽  
Field Programmable ◽  
Design Ideas

For the physiological signal monitoring applications, as a micro-controller based on field programmable gate array (FPGA) physiological parameters intelligent acquisition system is given, which has the advantages of low cost, high speed, low power consumption. FPGA is responsible for the completion of pulse sensor, the temperature sensor, acceleration sensor data acquisition and serial output and so on. Focuses on the design ideas and architecture of the various subsystems of the whole system, gives the internal FPGA circuit diagram of the entire system. The whole system is easy to implement and has a very good promotional value.

High Speed FPGA Based 128-bit Advance Encryption Standard (AES)

2021 ◽  
Vol 11 ◽  
Author(s):  
Ibrahem M. T. Hamidi ◽  
Farah S. H. Al-aassi
Keyword(s):  
High Throughput ◽  
Field Programmable Gate Array ◽  
High Speed ◽  
Design Tool ◽  
Advanced Encryption Standard ◽  
Clock Frequency ◽  
Advance Encryption Standard ◽  
Field Programmable ◽  
Internal Component ◽  
Gate Array

Aim: Achieve high throughput 128 bits FPGA based Advanced Encryption Standard. Background: Field Programmable Gate Array (FPGA) provides an efficient platform for design AES cryptography system. It provides the capability to control over each bit using HDL programming language such as VHDL and Verilog which results an output speed in Gbps rang. Objective: Use Field Programmable Gate Array (FPGA) to design high throughput 128 bits FPGA based Advanced Encryption Standard. Method: Pipelining technique has used to achieve maximum possible speed. The level of pipelining includes round pipelining and internal component pipelining where number of registers inserted in particular places to increase the output speed. The proposed design uses combinatorial logic to implement the byte substitution. The s-box implemented using composed field arithmetic with 7 stages of pipelining to reduce the combinatorial logic level. The presented model has implemented using VHDL in Xilinix ISETM 14.4 design tool. Result: The achieved results were 18.55 Gbps at a clock frequency of 144.96 MHz and area of 1568 Slices in Spartan3 xc3s1000 hardware. Conclusion: The results show that the proposed design reaches a high throughput with acceptable area usage compare with other designs in the literature.

scholarly journals High speed multi-channel data acquisition technique for efficient hardware utilization using quad data rate approach

2018 ◽  
Vol 7 (4) ◽  
pp. 2569
Author(s):  
Priyanka Chauhan ◽  
Dippal Israni ◽  
Karan Jasani ◽  
Ashwin Makwana
Keyword(s):  
Power Consumption ◽  
Data Acquisition ◽  
Resource Utilization ◽  
Field Programmable Gate Array ◽  
High Speed ◽  
State Of The Art ◽  
Data Rate ◽  
Field Programmable ◽  
Sensor Signals ◽  
Acquisition Technique

Data acquisition is the most demanding application for the acquisition and monitoring of various sensor signals. The data received are processed in real-time environment. This paper proposes a novel Data Acquisition (DAQ) technique for better resource utilization with less power consumption. Present work has designed and compared advanced Quad Data Rate (QDR) technique with traditional Dual Data Rate (DDR) technique in terms of resource utilization and power consumption of Field Programmable Gate Array (FPGA) hardware. Xilinx ISE is used to verify results of FPGA resource utilization by QDR with state of the art DDR approach. The paper ratiocinates that QDR technique outperforms traditional DDR technique in terms of FPGA resource utilization.  

scholarly journals SYNTHESIS AND FPGA–IMPLEMENTATION BASED NEURAL TECHNIQUE OF A NONLINEAR ADC MODEL

2014 ◽  
pp. 27-33
Author(s):  
Mounir Bouhedda ◽  
Mokhtar Attari
Keyword(s):  
Integrated Circuit ◽  
Field Programmable Gate Array ◽  
High Speed ◽  
Hardware Description Language ◽  
Description Language ◽  
Analog To Digital ◽  
Field Programmable ◽  
Hardware Description ◽  
Nonlinear Analog ◽  
Very High

The aim of this paper is to introduce a new architecture using Artificial Neural Networks (ANN) in designing a 6-bit nonlinear Analog to Digital Converter (ADC). A study was conducted to synthesise an optimal ANN in view to FPGA (Field Programmable Gate Array) implementation using Very High-speed Integrated Circuit Hardware Description Language (VHDL). Simulation and tests results are carried out to show the efficiency of the designed ANN.

Efficient Lightweight Hardware Structures of Point Multiplication on Binary Edwards Curves for Elliptic Curve Cryptosystems

2019 ◽  
Vol 28 (09) ◽  
pp. 1950149
Author(s):  
Bahram Rashidi ◽  
Mohammad Abedini
Keyword(s):  
High Speed ◽  
Critical Path ◽  
Low Cost ◽  
Path Delay ◽  
Point Multiplication ◽  
Low Area ◽  
Elliptic Curve Cryptosystems ◽  
Edwards Curves ◽  
Special Cases ◽  
Field Multiplication

This paper presents efficient lightweight hardware implementations of the complete point multiplication on binary Edwards curves (BECs). The implementations are based on general and special cases of binary Edwards curves. The complete differential addition formulas have the cost of [Formula: see text] and [Formula: see text] for general and special cases of BECs, respectively, where [Formula: see text] and [Formula: see text] denote the costs of a field multiplication, a field squaring and a field multiplication by a constant, respectively. In the general case of BECs, the structure is implemented based on 3 concurrent multipliers. Also in the special case of BECs, two structures by employing 3 and 2 field multipliers are proposed for achieving the highest degree of parallelization and utilization of resources, respectively. The field multipliers are implemented based on the proposed efficient digit–digit polynomial basis multiplier. Two input operands of the multiplier proceed in digit level. This property leads to reduce hardware consumption and critical path delay. Also, in the structure, based on the change of input digit size from low digit size to high digit size the number of clock cycles and input words are different. Therefore, the multiplier can be flexible for different cryptographic considerations such as low-area and high-speed implementations. The point multiplication computation requires field inversion, therefore, we use a low-cost Extended Euclidean Algorithm (EEA) based inversion for implementation of this field operation. Implementation results of the proposed architectures based on Virtex-5 XC5VLX110 FPGA for two fields [Formula: see text] and [Formula: see text] are achieved. The results show improvements in terms of area and efficiency for the proposed structures compared to previous works.

scholarly journals Novel Binary Signed-Digit Addition Algorithm for FPGA Implementation

2019 ◽  
Vol 29 (09) ◽  
pp. 2050136
Author(s):  
Yuuki Tanaka ◽  
Yuuki Suzuki ◽  
Shugang Wei
Keyword(s):  
Field Programmable Gate Array ◽  
High Speed ◽  
Number System ◽  
Logic Circuit ◽  
Fpga Implementation ◽  
Number Representation ◽  
Representation System ◽  
Representation Systems ◽  
Field Programmable ◽  
Gate Array

Signed-digit (SD) number representation systems have been studied for high-speed arithmetic. One important property of the SD number system is the possibility of performing addition without long carry chain. However, many numbers of logic elements are required when the number representation system and such an adder are realized on a logic circuit. In this study, we propose a new adder on the binary SD number system. The proposed adder uses more circuit area than the conventional SD adders when those adders are realized on ASIC. However, the proposed adder uses 20% less number of logic elements than the conventional SD adder when those adders are realized on a field-programmable gate array (FPGA) which is made up of 4-input 1-output LUT such as Intel Cyclone IV FPGA.

Sign in / Sign up

Export Citation Format

Share Document