Gasoline Desulphurization by Reactive Adsorption on ZnO /Bentonite

2019 ◽  
Vol 70 (1) ◽  
pp. 50-53
Author(s):  
Constantin Sorin Ion ◽  
Mihaela Bombos ◽  
Gabriel Vasilievici ◽  
Vasile Matei
Keyword(s):  
Zinc Oxide ◽  
Adsorption Isotherm ◽  
Operating Temperature ◽  
Continuous System ◽  
Particle Sizes ◽  
Textural Characteristics ◽  
Reactive Adsorption ◽  
Atmospheric Distillation ◽  
Increased Pressure

Desulfurization of atmospheric distillation (DA) gasoline was performed by reactive adsorption on ZnO/ bentonite. The adsorbent was characterized by determining the distribution of particle sizes of zinc oxide powdered, adsorption isotherm and textural characteristics of granulated adsorbent. Adsorption experiments of atmospheric distillation gasoline were performed in continuous system at 280-320oC, 5-25 bar and volume hourly space velocities of 1-1.5 h-1. The adsorption on ZnO/ bentonite has been favored by increased pressure and operating temperature.

Fuels Desulphurisation by Adsorbtion on Fe / Bentonite

2017 ◽  
Vol 68 (3) ◽  
pp. 483-486
Author(s):  
Constantin Sorin Ion ◽  
Mihaela Bombos ◽  
Gabriel Vasilievici ◽  
Dorin Bombos
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Pore Volume ◽  
Pore Diameter ◽  
Adsorption Process ◽  
Continuous System ◽  
Gas Oil ◽  
Average Pore ◽  
Atmospheric Distillation

Desulfurisation of atmospheric distillation gasoline and gas oil was performed by adsorption process on Fe/ bentonite. The adsorbent was characterized by determining the adsorption isotherms, specific surface area, pore volume and average pore diameter. Adsorption experiments of atmospheric distillation gasoline and gas oil were performed in continuous system at 280�320oC, 5 atm and volume hourly space velocities of 1�2 h-1. The efficiency of adsorption on Fe / bentonite was better at desulphurisation of gasoline versus gas oil.

scholarly journals Thin Film Gas Sensors Based on Planetary Ball-Milled Zinc Oxide Nanoinks: Effect of Milling Parameters on Sensing Performance

2021 ◽  
Vol 11 (20) ◽  
pp. 9676
Author(s):  
Raju Sapkota ◽  
Pengjun Duan ◽  
Tanay Kumar ◽  
Anusha Venkataraman ◽  
Chris Papadopoulos
Keyword(s):  
Thin Film ◽  
Zinc Oxide ◽  
Gas Sensors ◽  
Zno Nanoparticles ◽  
Food Packaging ◽  
Room Temperature ◽  
Industrial Applications ◽  
Sensor Response ◽  
Particle Sizes ◽  
Zno Nanoparticle

Planetary ball-milled zinc oxide (ZnO) nanoparticle suspensions (nanoinks) were used to produce thin film chemiresistive gas sensors that operate at room temperature. By varying milling or grinding parameters (speed, time, and solvent) different thin film gas sensors with tunable particle sizes and porosity were fabricated and tested with dry air/oxygen against hydrogen, argon, and methane target species, in addition to relative humidity, under ambient light conditions. Grinding speeds of up to 1000 rpm produced particle sizes and RMS thin film roughness below 100 nm, as measured by atomic force and scanning electron microscopy. Raman spectroscopy, photoluminescence, and X-ray analysis confirmed the purity and structure of the resulting ZnO nanoparticles. Gas sensor response at room temperature was found to peak for nanoinks milled at 400 rpm and for 30 min in ethylene glycol and deionized water, which could be correlated to an increased film porosity and enhanced variation in electron concentration resulting from adsorption/desorption of oxygen ions on the surfaces of ZnO nanoparticles. Sensor response and dynamic behavior was found to improve as the temperature was increased, peaking between 100 and 150 °C. This work demonstrates the use of low-cost PBM nanoinks as the active materials for solution-processed thin film gas/humidity sensors for use in environmental, medical, food packaging, laboratory, and industrial applications.

Effect of particle sizes of zinc oxide on mechanical, thermal and morphological properties of polyoxymethylene/zinc oxide nanocomposites

2008 ◽  
Vol 27 (8) ◽  
pp. 971-976 ◽  
Author(s):  
Sirirat Wacharawichanant ◽  
Supakanok Thongyai ◽  
Akaraphol Phutthaphan ◽  
Chaturong Eiamsam-ang
Keyword(s):  
Zinc Oxide ◽  
Morphological Properties ◽  
Particle Sizes

Thin film combustible gas sensors based on Zinc Oxide

2001 ◽  
Vol 666 ◽  
Author(s):  
Patrícia Nunes ◽  
Elvira Fortunato
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Zinc Oxide ◽  
Gas Sensors ◽  
Operating Temperature ◽  
Zno Thin Films ◽  
Gas Concentration ◽  
High Electrical Resistivity ◽  
Combustible Gas ◽  
Sensitivity Tests

ABSTRACTSensitivity tests to reductive gases such as methane, hydrogen and ethane were performed on zinc oxide (ZnO) thin films. The highest value of sensitivity was obtained for the film with a high electrical resistivity and a low thickness. The variation of the operating temperature of the film leads to a significant change in the sensitivity of the sensor with an ideal operating temperature dependence of the gas used. The sensitivity of the ZnO thin films changes linear with the increase of the gas concentration. However these films seem to be more appropriated for the detection of hydrogen following by methane and than for ethane since the value of sensitivity obtained are higher and its variation with the gas concentration more pronounced.

scholarly journals Health effects after inhalation of micro- and nano-sized zinc oxide particles in human volunteers

2020 ◽  
Author(s):  
Christian Monsé ◽  
Monika Raulf ◽  
Birger Jettkant ◽  
Vera van Kampen ◽  
Benjamin Kendzia ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Health Effects ◽  
Inflammatory Responses ◽  
Acute Phase Proteins ◽  
Deposition Efficiency ◽  
Induced Sputum ◽  
Particle Sizes ◽  
Human Volunteers ◽  
Zno Particles ◽  
Oxide Particles

Abstract Inhalation of ZnO particles can cause inflammation of the airways and metal fume fever. It is unclear if different sizes of the particles alter these effects. However, various studies report higher biological activity of other nano-sized particles compared to microparticles. No effects at all were observed after inhalation of micro- and nano-sized zinc oxide (ZnO) particle concentrations of 0.5 mg/m3. Studies with different particle sizes of ZnO at higher exposures are not available. Accordingly, we hypothesized that inhalation of nano-sized ZnO particles induces stronger health effects than the inhalation of the same airborne mass concentration of micro-sized ZnO particles. 16 healthy volunteers (eight men, eight women) were exposed to filtered air and ZnO particles (2.0 mg/m3) for 2 h (one session with nano- and one with micro-sized ZnO) including 1 h of cycling at moderate workload. Effect parameters were symptoms, body temperature, inflammatory markers in blood and in induced sputum. Induced sputum was obtained at baseline examination, 22 h after exposure and at the end of the final test. The effects were assessed before, immediately after, about 22 h after, as well as two and three days after each exposure. Neutrophils, monocytes and acute-phase proteins in blood increased 22 h after micro- and nano-sized ZnO exposure. Effects were generally stronger with micro-sized ZnO particles. Parameters in induced sputum showed partial increases on the next day, but the effect strengths were not clearly attributable to particle sizes. The hypothesis that nano-sized ZnO particles induce stronger health effects than micro-sized ZnO particles was not supported by our data. The stronger systemic inflammatory responses after inhalation of micro-sized ZnO particles can be explained by the higher deposition efficiency of micro-sized ZnO particles in the respiratory tract and a substance-specific mode of action, most likely caused by the formation of zinc ions.

scholarly journals Kinetics and Photodegradation Study of Aqueous Methyltert-Butyl Ether Using Zinc Oxide: The Effect of Particle Size

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Zaki S. Seddigi ◽  
Saleh A. Ahmed ◽  
Shahid P. Ansari ◽  
Ekram Danish ◽  
Abdullah Abu Alkibash ◽  
...  
Keyword(s):  
Particle Size ◽  
Zinc Oxide ◽  
Order Reaction ◽  
Average Particle ◽  
Particle Sizes ◽  
Mercury Lamp ◽  
Butyl Ether ◽  
First Order ◽  
Effect Of Particle Size ◽  
Kinetics Of

Zinc oxide of different average particle sizes 25 nm, 59 nm, and 421 nm as applied in the photodegradation of MTBE. This study was carried out in a batch photoreactor having a high pressure mercury lamp. Zinc oxide of particle size of 421 nm was found to be the most effective in degrading MTBE in an aqueous solution. On using this type of ZnO in a solution of 100 ppm MTBE, the concentration of MTBE has decreased to 5.1 ppm after a period of five hours. The kinetics of the photocatalytic degradation of MTBE was found to be a first order reaction.

Sign in / Sign up

Export Citation Format

Share Document