AN ASSESSMENT OF CLIENTS’ PERFORMANCE IN HAVING AN EFFICIENT BUILDING PROCESS IN UGANDA/UŽSAKOVO DALYVAVIMO EFEKTYVIAME STATYBOS PROCESE ĮVERTINIMAS UGANDOJE

2008 ◽  
Vol 14 (2) ◽  
pp. 73-78 ◽  
Author(s):  
Henry Mwanaki Alinaitwe
Keyword(s):  
Construction Industry ◽  
Limited Liability ◽  
Stress Factors ◽  
Building Industry ◽  
Specific Nature ◽  
Building Process ◽  
Different Types ◽  
Almost All ◽  
Building Project ◽  
Construction Works

Over the years researchers have paid little attention to the performance of the clients in the building industry. Much of the research on improvement of performance of the construction industry has mainly focused on contractors and the supply chain. The performance of a client is important because any decision made will affect project success. Failure on the part of the client might lead to stress factors causing significant problems in successive stages of the project. This research is an investigation into the roles of the client to find out whether clients in the building industry in Uganda are playing their part. Due to the non‐specific nature of clients, a guided questionnaire survey was carried out among architects who normally work with different types of clients. The majority of the building clients in Uganda are individuals followed by limited liability companies. It was found out that delay by clients in paying the contractors is a major factor affecting the performance of contractors. Almost all clients do not support training of the workers in its different forms. Construction works start before the designs are completed and the majority of the variations is due to incomplete briefs and designs. Many clients or their representatives do not attend meetings as regularly as would have been necessary. This study reveals information that will help clients in their future projects for ensuring successful building project implementation. Santrauka Daug metų mokslininkai mažai kreipė dėmesio į užsakovų dalyvavimą statybos pramonėje. Dauguma atliktų mokslinių tyrimų, susijusių su statybos pramonės darbų kokybės gerinimu, yra orientuoti į rangovus ir tiekimo grandinę. Užsakovo dalyvavimas yra svarbus todėl, kad kiekvienas priimtas sprendimas gali daryti įtaką projekto sėkmei. Užsakovų žlugimas gali sudaryti įtampą, kuri gali kliudyti sėkmingai vykdyti projekto stadijas. Straipsnyje buvo nagrinėjamas užsakovų vaidmuo, norint nustatyti, ar užsakovai Ugandoje aktyviai dalyvauja statybos pramonėje. Buvo atlikta apklausa architektų, kurie dirba su įvairiais užsakovais. Dauguma statybos užsakovų Ugandoje yra ribotos atsakomybės įmonės. Taip pat buvo pastebėta, kad užsakovo delsimas sumokėti rangovams yra vienas iš svarbiausių veiksnių, darančių įtaką rangovų darbui. Beveik visi užsakovai nepritaria darbuotojų kvalifikacijos tobulinimui įvairiais būdais. Dažniausiai statybos darbai yra pradedami dar nebaigus projektavimo darbų ir dauguma nukrypimų yra dėl neparengtos techninės dokumentacijos. Dauguma užsakovų ar jų atstovų nereguliariai dalyvauja svarbiuose susitikimuose. Šis tyrimas pateikia informaciją, kuri padės užsakovams ateities projektuose ir užtikrins sėkmingą statybos projektų vykdymą.

scholarly journals DIFFERENT APPROACHES OF CLIENTS AND CONSULTANTS TO CONTRACTORS’ QUALIFICATION AND SELECTION

2005 ◽  
Vol 11 (4) ◽  
pp. 267-276 ◽  
Author(s):  
Mehmedali Egemen ◽  
Abdulrezak N. Mohamed
Keyword(s):  
Construction Industry ◽  
Selection Processes ◽  
Significant Difference ◽  
Different Types ◽  
Almost All ◽  
High Willingness

Nowadays, clients are the dominant groups in almost all types of industries. However, the construction industry is unique and consultants, as representatives of clients, are very important figures in this industry as well. By presenting survey findings of 91 clients and 50 consultants, this study reveals clients’ and consultants’ differing expectations of contracting organisations during contractor qualification and selection. The study has clearly confirmed the fact that consultants’ perspectives are rather different and their contractors’ expectations of their clients vary very significantly from the clients themselves. Furthermore, significantly different results were found even among different types of consultants and different categories of clients. Moreover, this study showed that both clients and consultants had high willingness to continue working with the same contractor in possible future works assuming they are satisfied with the previous works. The criteria, which contribute to achieving full client and/or consultant satisfaction and hence lead to possible repetitive works are identified and the results showed the existence of significant difference between clients and consultants perspectives regarding this issue as well. The framework presented within this paper aims to help the contracting organisations to compare and recognise the different approaches and perceptions of both clients and consultants during contractor qualification and selection processes. The contracting organisations in the related sectors will be able to use the framework provided within this study to recognise the overall demand in a more complete and better manner and hence formulate or modify strategies accordingly.

Types of refractive errors and methods for their diagnosis

2020 ◽  
pp. 30-36
Author(s):  
Olga Lemzyakova
Keyword(s):  
Optical System ◽  
Contact Lenses ◽  
Vision Impairment ◽  
Refractive Errors ◽  
Vision Correction ◽  
Light Rays ◽  
Different Types ◽  
Almost All ◽  
Degrees Of Severity ◽  
The Brain

Refraction of the eye means its ability to bend (refract) light in its own optical system. In a normal state, which is called emmetropia, light rays passing through the optical system of the eye focus on the retina, from where the impulse is transmitted to the visual cortex of the brain and is analyzed there. A person sees equally well both in the distance and near in this situation. However, very often, refractive errors develop as a result of various types of influences. Myopia, or short-sightedness, occurs when the light rays are focused in front of the retina as a result of passing through the optical system of the eye. In this case, a person will clearly distinguish close objects and have difficulties in seeing distant objects. On the opposite side is development of farsightedness (hypermetropia), in which the focusing of light rays occurs behind the retina — such a person sees distant objects clearly, but outlines of closer objects are out of focus. Near vision impairment in old age is a natural process called presbyopia, it develops due to the lens thickening. Both myopia and hypermetropia can have different degrees of severity. The variant, when different refractive errors are observed in different eyes, is called anisometropia. In the same case, if different types of refraction are observed in the same eye, it is astigmatism, and most often it is a congenital pathology. Almost all of the above mentioned refractive errors require correction with spectacles or use of contact lenses. Recently, people are increasingly resorting to the methods of surgical vision correction.

How switching the substituent of a pyrene derivative from a methyl to a butyl affects the fluorescence response of polystyrene randomly labeled with pyrene

2010 ◽  
Vol 88 (3) ◽  
pp. 217-227 ◽  
Author(s):  
Mark Ingratta ◽  
Manoj Mathew ◽  
Jean Duhamel
Keyword(s):  
Organic Solvents ◽  
Excellent Agreement ◽  
Fluorescence Spectra ◽  
Series Solutions ◽  
Specific Nature ◽  
Polymer Backbone ◽  
Excimer Fluorescence ◽  
Fluorescence Response ◽  
Different Types ◽  
Blob Model

A series of polystyrenes randomly labeled with 1-pyrenebutanol were prepared by copolymerizing styrene and 1-pyrenebutylacrylate yielding the CoBuE–PS series. Solutions of CoBuE–PS were prepared in nine organic solvents having viscosities ranging from 0.36 to 5.5 mPa·s and the fluorescence spectra and pyrene monomer and excimer fluorescence decays were acquired. Analysis of the fluorescence spectra yielded the IE/IM ratio, whereas analysis of the fluorescence decays with the fluorescence blob model (FBM) yielded the parameters N blobo , <kblob × Nblob> , and k blobo . These parameters were compared to those obtained with two other series of pyrene-labeled polystyrenes, which had been studied earlier, namely CoA–PS and CoE–PS where pyrene was attached to the polymer backbone via a methylamide and benzyl methylether linker, respectively. Although the parameters IE/IM, N blobo , <kblob × Nblob>, and k blobo took different values according to the specific nature of the linker connecting pyrene to the polystyrene backbone, they exhibited trends that were quite similar for all the pyrene-labeled polystyrene constructs. The excellent agreement between the parameters retrieved for the three different types of pyrene-labeled polystyrenes suggests that the FBM accounts satisfyingly for differences in the nature of the label used, while still retrieving information pertinent to the polymer of interest.

XXVI.—The Field of the Essay

PMLA ◽  
1921 ◽  
Vol 36 (4) ◽  
pp. 551-564 ◽  
Author(s):  
Charles E. Whitmore
Keyword(s):  
Subject Matter ◽  
Actual Practice ◽  
Different Types ◽  
Almost All ◽  
Moderate Length

Of all the literary terms in common use, the word “essay” has perhaps the widest field and the most indeterminate content. Since the form to which it applies has taken on a fresh character in the hands of almost all its chief exponents, it has become in practice the designation for any piece of prose of moderate length, and has consequently embraced a bewilderingly various subject-matter. Moreover, the essayists themselves are by no means all of a piece. Bacon and Lamb, for instance, have little in common; and the type of ‘essayist’ represented by Macaulay and Carlyle has little in common with either. As a result of this wide extension, studies of the essay either include so much as to be very indefinite, or else are based on partial views, the upshot, in either case, becoming sufficiently vague. At the same time, the word “essay” goes on being used, and collections, of curiously assorted content, go on being made; and it therefore seems worth while to pass in review the different types represented in actual practice, in order to see just how much continuity is discernible among them.

Chromosomal instability in different species of agricultural animals (review)

2021 ◽  
pp. 19-26
Author(s):  
V. A. Andreeva
Keyword(s):  
Chromosomal Instability ◽  
Animal Species ◽  
Western Siberia ◽  
Reproductive Function ◽  
Farm Animals ◽  
Chromosomal Disorders ◽  
Important Indicator ◽  
Karyotypic Analysis ◽  
Different Types ◽  
Almost All

The purpose of the work was to analyze the frequency of chromosomal instability in different species of agricultural animals in Western Siberia on the basis of literature data. The analysis of the literature on the topic of somatic chromosomal instability in agricultural animals has been carried out. Despite the stability of the chromosome set, deviations from it are quite common. It is noteworthy that chromosomal instability is characteristic of almost all individuals in the population and serves as an important indicator for assessing the natural mutability of chromosomes. It has been found if an aberration appeared in one tissue, it is very likely to occur in others. It has been noted that somatic chromosomal instability occurs in animals with reduced reproductive function, as well as those suffering from any pathology. For example, in calves with parakeratosis the increase in the frequency of chromatid and isochromatid breaks has been found. Analysis of the frequency of aberrations in sires, which differ in the level of perinatal mortality of offspring revealed the increased percentage of offspring mortality in fathers with the large number of chromosomal disorders. Therefore, low fertilization, spontaneous abortions and stillbirths may be indications for karyotypic analysis. It has been revealed that the lability of the karyotype is inherent in all animal species, regardless of the species, sex and age, as well as the morphofunctional state. The data on some types of somatic chromosomal instability in different types of farm animals in Western Siberia has been presented. Such indicators as the frequency of polyploidy, the number of cells with fragments of chromosomes, as well as single and paired fragments of chromosomes has been given. Different types of chromosomal instability varied depending on the animal species and climate zone. The presented data can be accepted as a physiological norm and used in veterinary medicine and animal science.

Total Quality Management Benefits and Barriers in Construction Industry

2021 ◽  
Vol 11 (1) ◽  
pp. 193-199
Author(s):  
Rasha A. Al Salihi ◽  
Redvan Ghasemlounia
Keyword(s):  
Quality Management ◽  
Total Quality Management ◽  
Construction Industry ◽  
Improve Quality ◽  
Total Quality ◽  
Industry Growth ◽  
Continual Improvement ◽  
Full Participation ◽  
Industry Success ◽  
Building Project

The building sector is playing an important part Major factor in any country's development. The Construct industry growth depends on Building project efficiency. Quality is one thing Important factor in construction industry success in this paper the problems of quality definition in the construction industry are discussed, analysis potential advantages of quality implementation and considers quality barriers to Building implementation. Many implementing obstacles. We identify recent patterns that could lead to the Invade barriers. However, the various building actors must Know that improvement is necessary for the construction industry to improve quality TQM is specifically designed to deliver excellence in customer satisfaction by continual improvement full participation of product and processes every person who is a part of dedication that product/process. It's an orchestrated approach enhancement. If implemented correctly, it will support the Company of construction to boost its efficiency.

Adhesives for the Installation of Cast Basalt Elements on Metal and Comparison of Properties when Using Different Types of Fillers

2021 ◽  
Vol 898 ◽  
pp. 35-41
Author(s):  
Jakub Hodul ◽  
Tomáš Žlebek ◽  
Lenka Mészárosová ◽  
Aleš Jakubík ◽  
Rostislav Drochytka
Keyword(s):  
Construction Industry ◽  
Raw Materials ◽  
Physical And Mechanical Properties ◽  
Mineral Admixtures ◽  
Maximum Efficiency ◽  
Organic Additives ◽  
Metal Base ◽  
Secondary Raw Materials ◽  
Ecological Benefit ◽  
Different Types

The polymeric adhesives for the installation of basalt elements on a metal base are designed primarily for environments with increased chemical and mechanical stress. They are composed of polymer resins (epoxy, polyurethane) as binders, as well as organic additives and mineral admixtures that mainly fulfill the function of filler. In all sectors of today's construction industry, maximum efficiency in the production of materials is required for sustainability purposes, which, however, must never be at the expense of the quality or the required performance. Due to these requirements, great emphasis is placed on the maximum use of secondary raw materials. Talc is used as the primary filler for polymer adhesives. Sawdust, tire rubber, and fly ash are used as secondary raw materials. The use of these in building supplies can positively affect some physical and mechanical properties of polymeric adhesives. Also, the use of secondary raw materials has the above-mentioned ecological benefit. Basic properties, such as bulk density and adhesion to both metallic and basalt elements, were monitored. The details of the cohesion of the adhesive with the bonded material, as well as the distribution of secondary raw materials in the polymer matrix, were assessed microscopically.

scholarly journals Work Stress among Professionals in Building Construction Industry in Nigeria

2011 ◽  
Vol 11 (3) ◽  
pp. 45-57 ◽  
Author(s):  
Eziyi Offia Ibem ◽  
Michael Nwabueze Anosike ◽  
Dominic Ezenwa Azuh ◽  
Tim O. Mosaku
Keyword(s):  
Construction Industry ◽  
Work Stress ◽  
Management Strategies ◽  
High Volume ◽  
Time Frame ◽  
Building Construction ◽  
Stress Factors ◽  
Project Delivery ◽  
Building Projects ◽  
Structural Engineers

This study was undertaken to identify key stress factors among professionals in building construction industry in Nigeria. This is in view of the fact that to date, very little is known about work stress among professionals in building construction industry in this country. The study involved the administration of questionnaire to 107 professionals including architects, builders, civil/structural engineers and quantity surveyors randomly selected from 60 ongoing building projects in Anambra, Ogun and Kaduna States, Nigeria. The data was analysed using descriptive statistics, and findings show that the principal sources of stress were high volume of work, uncomfortable site office environment, lack of feedback on previous and ongoing building projects, and variations in the scope of work in ongoing building projects. The paper suggests that taking responsibility for work which one has adequate capacity to handle, establishing realistic budgets and time frame for project delivery, provision of spatially adequate, visually and thermally comfortable site offices, adoption of appropriate job design practice and education of professionals on stress management strategies will reduce the incidence of stress among professionals in building industry in Nigeria. 

Mafia infiltration, public administration and local institutions: A comparative study in Northern Italy

2018 ◽  
Vol 17 (5) ◽  
pp. 540-562 ◽  
Author(s):  
Joselle Dagnes ◽  
Davide Donatiello ◽  
Valentina Moiso ◽  
Davide Pellegrino ◽  
Rocco Sciarrone ◽  
...  
Keyword(s):  
Public Administration ◽  
Construction Industry ◽  
Social Relations ◽  
Local Level ◽  
Northern Italy ◽  
Comparative Case Study ◽  
Local Institutions ◽  
Opportunity Structure ◽  
Different Types

Nuanced explanations of the factors underpinning the mafia’s movements across territories have recently been proposed. However, more light must be shed on the mechanisms through which mafiosi try to infiltrate the legal economy in non-traditional territories. Accordingly, this study aims to micro-found interactions and exchanges that mainly involve mafiosi, politicians and economic actors in expansion areas. Focusing on the local level, we will show how the misuse of several administrative tools generates a profitable opportunity structure for mafiosi. To this end, we present an in-depth comparative case study of three events involving the construction industry that took place in Northern Italy. The main findings show that: (i) mafiosi are skilled at smoothing social relations, enlarging and consolidating opaque networks predating their arrival; (ii) they give rise to different types of mutual exchanges and network structures.

scholarly journals Use of technical hemp in the construction industry

2018 ◽  
Vol 146 ◽  
pp. 03011 ◽  
Author(s):  
Petra Nováková
Keyword(s):  
Construction Industry ◽  
Building Industry ◽  
Environmental Burden ◽  
Building Insulation ◽  
Technical Properties

Current requirements for building insulation are constantly increasing, not only in terms of the technical properties of the material used but also in terms of the environmental burden. This article focuses on the use of technical hemp in the building industry, describes individual products, its properties and uses. Part of the article is also the experience of realization and use of the building along with photographs.

Sign in / Sign up

Export Citation Format

Share Document