EVALUATION OF PV POWERED SWITCHABLE GLAZING TECHNOLOGIES IN TERMS OF THEIR SUITABILITY FOR OFFICE WINDOWS IN MODERATE CLIMATES

2021 ◽  
Vol 16 (4) ◽  
pp. 81-110
Author(s):  
Janusz Marchwiński
Keyword(s):  
Energy Efficiency ◽  
Thermal Protection ◽  
Comparative Method ◽  
Point Of View ◽  
Working Environment ◽  
Design Decisions ◽  
Natural Lighting ◽  
Advantages And Disadvantages ◽  
Technical Issues ◽  
Technical Reliability

ABSTRACT In the search for façade solutions that meet requirements for energy efficiency and office space use comfort, it seems promising to apply a combination of photovoltaic (PV) technology with switchable glazing. It is believed that the merging of these two technologies might benefit the cooperation between regulated solar protection and energy efficiency. This article provides a design outlook on the use of PV-EC, PV-SPD, and PV-LCD technologies in terms of their utility for office buildings in moderate climates. This study concerns thermal, optical-visual, energetic, and technical issues, and a comparative method was applied. Based on current scientific research, the results of the analysis were juxtaposed with the requirements of the office working environment: natural lighting, thermal protection, glare protection, privacy control, energy efficiency, and technical reliability. The juxtaposition of these aspects revealed the advantages and disadvantages of a given solution from an architectural point of view. PV-EC technology in a side-by-side system was found to be the most appropriate solution and the results may be applied to make preliminary design decisions.

scholarly journals PROBLEMS OF FORMATION OF INCOME AND EXPENSES OF PRIVATE CONTRACTORS AS SUBJECTS OF INDEPENDENT PROFESSIONAL ACTIVITY

2019 ◽  
pp. 68-78
Author(s):  
Tetyana Fomina
Keyword(s):  
Comparative Method ◽  
Legal Aspects ◽  
Point Of View ◽  
Professional Activity ◽  
Court Decisions ◽  
Economic Point ◽  
Advantages And Disadvantages ◽  
Set Up ◽  
And Control ◽  
Private Contractor

Introduction. The need to set up a private enforcement institute arose from the problem of enforcement of court decisions. The activities of state executors are clearly regulated, have experience and achievements. A private contractor is authorized by the state to carry out enforcement activities, but from an economic point of view, he is a self-employed person, which means that he is financially interested in the results of his work. The economic aspect of private contractor activity is not well understood to date. Methods. The study is based on the use of the historical and comparative method in determining the prerequisites for establishing an institute of private performers in Ukraine and in the world. A generalization method was used to determine general properties in the taxation of private contractors. The efficiency of the work and the feasibility of introducing a “private” element in the enforcement of court decisions was proved by the method of analysis. The method of grouping was used to determine the taxation base for the performance of private contractors. Results. The organizational and legal aspects of the activity of private contractors have been determined. The economic advantages and disadvantages of introducing the Institute of Private Performers are presented. The procedure for recognition of income and formation of costs of private contractors is outlined. It is proved inadmissible to identify the concepts of “costs of enforcement proceedings” and “costs of private executors”. The necessity of accounting and control of results of activity of private contractors is substantiated. Discussion. Prospects for further researches will be to develop recommendations for accounting for deposit accounts; accounts intended to be credited to enforcement proceedings; accounts intended to account for the principal and additional remuneration of private contractors; payroll calculations; payments with budget for taxes, fees, other required payments private artist revenue and expenses, etc. Keywords: enforcement proceedings, self-employed entities, private contractor, remuneration of private contractor, costs of enforcement proceedings, costs of private contractor, income of private contractor.

scholarly journals Prospects for the implementation of real estate development in Ukraine based on energy efficiency principles and the problems with raising the finance required

2018 ◽  
pp. 5-15
Author(s):  
Lyudmila Swistun ◽  
Taina Zavora ◽  
Yuliia Khudolii
Keyword(s):  
Energy Efficiency ◽  
Real Estate ◽  
Energy Efficient ◽  
Energy Savings ◽  
Thermal Protection ◽  
Housing Stock ◽  
Real Estate Market ◽  
Point Of View ◽  
Real Estate Development ◽  
Residential Real Estate

The main goal of the study is to analyse the residential real estate market in Ukraine from the point of view of the need and the possibility of increasing its energy efficiency. Also, it aims to justify effective financial and credit mechanisms for ensuring measures to improve the thermal protection properties of residential and non- residential real estate, in particular by introducing energy efficiency development projects. With this research we investigated Ukraine's housing stock and utility tariffs and concluded that a beneficial strategy to be applied in Ukraine is the energy-efficient retrofit of real estate. This is one of the most effective ways to re-profile unclaimed real estate units in the existing state or to reconstruct inefficiently used buildings. Also, we reviewed selected methods of energy efficient residential real estate development and mechanisms of financing energy- efficient renovation of real estate used in the EU. And, in our view, the next step of the Ukraine in the direction of improving the energy efficiency of housing should be the effective operation of a dedicated/specific energy efficiency fund to ensure stable financing of housing modernization projects, which will allow for a comprehensive renovation of buildings and lead to significant annual energy savings in this end-use sector.

Optimization of Energy Efficiency of Residential Buildings Built of Bearing Three-Dimensional Blocks

2019 ◽  
pp. 23-27
Keyword(s):  
Energy Efficiency ◽  
Thermal Imaging ◽  
Control Method ◽  
Thermal Protection ◽  
Residential Buildings ◽  
Three Dimensional ◽  
Heat Fluxes ◽  
Point Of View ◽  
Transfer Resistance ◽  
Full Scale Tests

The article discusses the analysis of volume-block housing construction from the point of view of thermal protection of buildings. The results of full-scale tests on quality control of heat-protective properties of external walls and heat-accumulating ability of the object, on control of air permeability of the enclosing structures are presented. The multiplicity of air exchange in buildings made of volumetric blocks has been established. The estimation of the reduced heat transfer resistance of the exterior wall panel in natural conditions is made. A method of increasing the energy efficiency of houses of this type is proposed. During instrumental examination of the building, the method of complex thermal imaging control combining the advantages of the thermal imaging control method, making it possible to contactless record the distribution of radiation temperature on the surface in the field of view of the thermal imaging camera and high accuracy of contact methods for measuring temperature and heat fluxes, was used. Conducting thermal imaging of the outer and inner surfaces of the enclosing structure, we obtain the thermogram: two-dimensional images of the examined surfaces, where the color corresponds to the temperature value determined by the temperature scale of the thermogram. This thermogram makes it possible to conduct a detailed and reliable analysis of the state of the structure and its behavior in dynamics.

Perspectives and Regulation of the Russian Market for Project-based Transactions under the Kyoto Protocol

2008 ◽  
pp. 108-125
Author(s):  
K. Zavodov
Keyword(s):  
Energy Efficiency ◽  
Market Mechanism ◽  
Point Of View ◽  
Market Regulation ◽  
Foreign Investments ◽  
Russian Market ◽  
Increase Energy Efficiency ◽  
New Form ◽  
Contract Structure ◽  
Carbon Fund

Project-based transactions (PBTs) are a market mechanism of attracting foreign investments in order to abate greenhouse gas emissions and increase energy efficiency of the country’s enterprises. The article provides a classification and analyzes advantages and drawbacks of PBTs from the point of view of a host country. The main trends and factors determining the dynamics of the PBT market are described. Given that Russia currently lags behind the leaders of the PBT market, an incorporation of a state carbon fund is put forward with an aim of channelling PBTs through it. This paper proposes a form of PBT market regulation by incorporating an option mechanism into the contract structure of a transaction. A comparison of the new form of regulation with the tools that are currently in use in Russia and other countries demonstrates its greater economic efficiency under uncertainty.

ON COMPARATIVE ANALYSIS OF PERFORMANCE OPTIMIZATION METHODS OF MULTI-PUMP UNITS

2020 ◽  
pp. 23-28
Author(s):  
A.I. Glushchenko ◽  
M.Yu. Serov
Keyword(s):  
Energy Efficiency ◽  
Control System ◽  
Comparative Analysis ◽  
Performance Optimization ◽  
Optimization Methods ◽  
Online Optimization ◽  
New Approach ◽  
Advantages And Disadvantages ◽  
Analysis Of Performance

В статье рассматривается вопрос совершенствования системы управления параллельно-работающими насосными агрегатами с целью повышения энергоэффективности их работы. Проведено сравнение и выявление недостатков существующих методов решения рассматриваемой проблемы. Предложена идея нового подхода на базе онлайн оптимизации. The problem under consideration is improvement of the energy efficiency of a control system of parallel-running pump units. Known methods used to solve this problem are considered. Their advantages and disadvantages are shown. Finally, the idea of a new approach, which is based on online optimization, is proposed.

Design process for serious activities inspired by play and games: a problem solving with a board game from disengamement and gamification processes (Preprint)

2020 ◽  
Author(s):  
Stéphane Goria ◽  
Louise Dupet ◽  
Maëva Négroni ◽  
Gabriel Sega ◽  
Philippe Arnoux ◽  
...  
Keyword(s):  
Cancer Detection ◽  
Serious Games ◽  
Diagnostic Method ◽  
Scientific Literature ◽  
Imaging Techniques ◽  
Point Of View ◽  
Board Game ◽  
Advantages And Disadvantages ◽  
Design Result

BACKGROUND most serious games and other game-based tools are designed as digital games or escape games. They are designed for learning or sometimes in the field of medicine as an aid to care. However, they can also be seen as an aid to research, in our case, to evaluate the advantages and disadvantages of imaging techniques for cancer detection. OBJECTIVE we present a case study of action research on the design of a serious board game intended to consider the advantages and weaknesses of a diagnostic method in a different ways. The goal was to better understand the principles of designing a tool using game or play. METHODS we explicitly implemented another process than gamification to develop a structure reminiscent of the game to highlight the strengths and weaknesses of different imaging techniques from the point of view of the respondents (in this case specialists not directly involved in the project). Based on this feedback and the scientific literature on this subject, we detail the main categories of games and games developed for serious use in order to understand their differences. Concerning the cancer research part to which game contributes, our method is based on questions asked to experts and practitioners of this specialty. RESULTS an expert point of view translation tool in the form of a game has been realized to apprehend a research in a different way. CONCLUSIONS we show with the help of a diagram, some possible design paths leading to this type of design result including two hidden dimensions to consider (the awareness of the game or play by the "player" and his role as a contributor or recipient).

scholarly journals Patient’s point of view on the use of telemedicine in multiple sclerosis: a web-based survey

2021 ◽  
Author(s):  
Doriana Landi ◽  
Marta Ponzano ◽  
Carolina Gabri Nicoletti ◽  
Gaia Cola ◽  
Gianluca Cecchi ◽  
...  
Keyword(s):  
Multiple Sclerosis ◽  
Point Of View ◽  
Physical Parameters ◽  
Chronic Medical Conditions ◽  
Socioeconomic Conditions ◽  
Web Based ◽  
Healthcare Facilities ◽  
Advantages And Disadvantages ◽  
Disease Characteristics ◽  
Degree Of Disability

AbstractRestrictions in the access to healthcare facilities during COVID-19 pandemic have raised the need for remote monitoring of chronic medical conditions, including multiple sclerosis (MS). In order to enable the continuity of care in these circumstances, many telemedicine applications are currently tested. While physicians’ preferences are commonly investigated, data regarding the patients’ point of view are still lacking. We built a 37 items web-based survey exploring patients’ propensity, awareness, and opinions on telemedicine with the aim to evaluate the sustainability of this approach in MS. Analysing 613 questionnaires out of 1093 that were sent to persons with MS followed at the Multiple Sclerosis Center of Tor Vergata University, Rome, we found that more than half of respondents (54%) were open to having a televisit. Propensity toward telemedicine significantly depended on having a higher income (p = 0.037), living farther from the center (p = 0.038), using computer and tablet (p = 0.010) and using the Internet for other remote activities (p < 0.001), conversely it was not influenced by any specific disease characteristics (i.e. degree of disability). The main advantages and disadvantages of televisit reported by participants were respectively saving time (70%) and impossibility to measure physical parameters (71%). Although the majority of respondents are in favour of televisit, so far this approach is restricted to those displaying better socioeconomic conditions and higher familiarity with technology. Implications of the study are that telemedicine platforms should be better tailored to patients’ demands in order to spread the use of telemedicine, to enhance usability and to increase patients’ adherence.

New Trends in Asymptotic Approaches: Summation and Interpolation Methods

2001 ◽  
Vol 54 (1) ◽  
pp. 69-92 ◽  
Author(s):  
Igor V. Andrianov ◽  
Jan Awrejcewicz
Keyword(s):  
Applied Sciences ◽  
Solid Mechanics ◽  
State Of The Art ◽  
Asymptotic Methods ◽  
Perturbation Series ◽  
Review Article ◽  
Point Of View ◽  
Advantages And Disadvantages ◽  
New Methods ◽  
Local Character

In this review article, we present in some detail new trends in application of asymptotic techniques to mechanical problems. First we consider the various methods which allows for the possibility of extending the perturbation series application space and hence omiting their local character. While applying the asymptotic methods very often the following situation appears: an existence of the asymptotics ε → 0 implies an existence of the asymptotics ε → ∞ (or, in a more general sense, ε → a and ε → b). Therefore, an idea of constructing a single solution valid for a whole interval of parameter ε changes is very attractive. In other words, we discuss a problem of asymptotically equivalent function constructions possessing for ε → a and ε → b a known asymptotic behavior. The defined problems are very important from the point of view of both theoretical and applied sciences. In this work, we review the state-of-the-art, by presenting the existing methods and by pointing out their advantages and disadvantages, as well as the fields of their applications. In addition, some new methods are also proposed. The methods are demonstrated on a wide variety of static and dynamic solid mechanics problems and some others involving fluid mechanics. This review article contains 340 references.

Ship Drag Reduction by Microalgal Biopolymers: A Feasibility Analysis

2007 ◽  
Vol 51 (04) ◽  
pp. 326-337
Author(s):  
K. Gasljevic ◽  
E. F. Matthys
Keyword(s):  
Drag Reduction ◽  
Consumption Rate ◽  
Synthetic Polymers ◽  
Point Of View ◽  
Technical Issues ◽  
Fuel Costs ◽  
Propulsion Power ◽  
Ship Speed ◽  
In Situ Production

We have investigated the feasibility of using high-molecular-weight polysaccharides produced by marine microalgae to reduce the drag on ships and therefore to be able to reduce the needed propulsion power and fuel costs or, alternatively, to increase the ship speed. Experimental and analytical studies were used to answer four critical questions:How suitable are the biopolymers for drag reduction on ships?What is the needed polymer consumption rate at a given level of drag reduction?What is the achievable polymer production rate that can be achieved by the microalgae?What are possible modes of implementation of the proposed technology? It is seen that in situ production of biopolymers by microalgae growing on the hull may be a possible approach to polymeric ship drag reduction. Production of biopolysaccharide off the ship and even harvesting it from the ocean are other possibilities. The use of biopolymers is naturally advantageous from an environmental point of view as well. Some comparison of biopolymers and synthetic polymers is also presented. Several technical issues remain to be investigated, but the information available suggests that biopolymers may be the best additives for drag reduction on ships.

scholarly journals ANALYSIS OF HIKING FOOD PROCESSING TECHNOLOGIES ON THE MARKET

2020 ◽  
Vol 1 (12) ◽  
pp. 171
Author(s):  
Inese Silicka ◽  
Iveta Dembovska ◽  
Ērika Teirumnieka ◽  
Ivo Dembovskis
Keyword(s):  
Energy Efficiency ◽  
Food Processing ◽  
Nutritional Value ◽  
Comparative Method ◽  
New Products ◽  
Food Sector ◽  
Processing Technologies ◽  
Design And Manufacturing ◽  
Food Market ◽  
Market Trends

The food sector is one of the fastest-growing sectors, therefore it requires that producers follow food market trends and quickly respond to consumer demand. Besides, the producers have to comply with the increasingly strict conditions and regulations imposed on food producers in recent years. Food producers need to be able to develop products that are safe and have a long shelf life and at the same time, the manufacturers have to continuously diversify their products, create new flavor and aroma combinations, increase the nutritional value of the products while increasing the production volumes and considering energy efficiency, as well as environmental impact. The aim of the research is to study and analyse hiking food processing technologies on the market. Methods used in the research – monographic, synthesis, comparative method. The research developed proposals for manufacturers of hiking food for the design and manufacturing of new products.

Sign in / Sign up

Export Citation Format

Share Document