Impacts and Challenges of Cost-Effective Approaches Using Hybrid Cloud Infrastructure Model in Business Analytics

2021 ◽  
pp. 150-181
Author(s):  
Yogesh Madhukar Ghorpade ◽  
R. Kamatchi Iyer
Keyword(s):  
Cost Effective ◽  
Cloud Service ◽  
Vital Role ◽  
Proper Solution ◽  
Business Analytics ◽  
Cloud Infrastructure ◽  
Cost Effective Approach ◽  
Cost Effective Method ◽  
The Cost ◽  
Solution Methodology

The cost-effective methodology and its implementation are the primary approaches towards cost computing to bring effectiveness with the proper requirements and provide the proper solution. This chapter focuses on the discussion about the cost-effective method using cloud infrastructure model for building and management of on-premise with the off-premise cloud service provider in business analytics. This chapter also elaborates the methodology undertaken and design considerations for implementation of cloud infrastructure with non-virtualized and on-premise infrastructure environment. The experiment using YGCIS (YG-cloud infrastructure solution) methodology is built for business analytics platform where infrastructure and its resources play a vital role. The cost-effective approach for total cost ownership (TCO) is implemented using YGCCS (YG-cost computing solution) framework. Thus, the solution obtained after implementing the above frameworks increases ROI % and reduces the TCO, impacting the business analytics needs.

scholarly journals Cloud infrastructure solution: Building cost effective model for real time hands-on labs using computing methodologies for productive learning solutions in academics

2018 ◽  
Vol 7 (4) ◽  
pp. 2241
Author(s):  
Yogesh Madhukar Ghorpade ◽  
Prof. Dr. R. Kamatchi
Keyword(s):  
Computing Methodology ◽  
Cost Effective ◽  
Digital Transformation ◽  
Academic Environment ◽  
Cloud Infrastructure ◽  
Cost Effective Approach ◽  
Hands On ◽  
The World ◽  
The Cost ◽  
The Given

By in 2021, more than half of global enterprises already using cloud today adopt an all in cloud strategy [6]. Is today the world of modern infrastructure using digital transformation results cost effective approach? If yes, than how it has to be transformed and if No, than what are the differences between approaches applied. The cost effective methodology and its implementation is primary approach towards cost computing to bring effectiveness with the proper requirements and provides proper solution.The productive learning with different approach is the vital requirement for today’s Cloud infrastructure building from student’s perspective needs to be understood [13 - 15]. The paper aims in building and implementing the Lab infrastructure using developed model for cost effective approach by comparing On-premise vendors with cloud vendors. The technology that is used for the experiment are open-source and Proprietary. The paper results with the best approach used in cost computing methodology providing best solution for the given requirement in academic environment. 

CAD Of Anticorrosive Protection Of Steel Structures

2019 ◽  
pp. 18-23
Keyword(s):  
Protective Coating ◽  
Computer Aided Design ◽  
Steel Structures ◽  
Cost Effective ◽  
Operating Conditions ◽  
Computational Tool ◽  
Protection Method ◽  
Cost Effective Method ◽  
The Cost ◽  
Aided Design

The choice of cost-effective method of anticorrosive protection of steel structures is an urgent and time consuming task, considering the significant number of protection ways, differing from each other in the complex of technological, physical, chemical and economic characteristics. To reduce the complexity of solving this problem, the author proposes a computational tool that can be considered as a subsystem of computer-aided design and used at the stage of variant and detailed design of steel structures. As a criterion of the effectiveness of the anti-corrosion protection method, the cost of the protective coating during the service life is accepted. The analysis of existing methods of steel protection against corrosion is performed, the possibility of their use for the protection of the most common steel structures is established, as well as the estimated period of effective operation of the coating. The developed computational tool makes it possible to choose the best method of protection of steel structures against corrosion, taking into account the operating conditions of the protected structure and the possibility of using a protective coating.

An Innovative Cost-Effective Approach for Characterization of Removable Prosthesis - Case Series

2021 ◽  
Author(s):  
Tushar
Keyword(s):  
Case Series ◽  
Cost Effective ◽  
Functional Rehabilitation ◽  
Denture Base ◽  
Cost Effective Approach ◽  
Removable Denture ◽  
Removable Prosthesis ◽  
Cost Effective Alternative ◽  
The Aesthetic ◽  
The Cost

Esthetics plays a crucial role in rehabilitation of removable dentures to achieve a pleasant smile. Denture esthetics is the effect produced, which improves the beauty and attractiveness of a person. With the advances of implants and ceramics, the conventional removable denture needs to be updated. denture characterization is a must in avoiding denture look and giving natural look. Giving the prosthesis as close as possible to the natural apparatus before the tooth loss is the key to a successful prosthetic, esthetic and functional rehabilitation. As a prosthodontist dealing in fulfilling the aesthetic challenges an economical alternative to high-end costly procedures is a must considering the Indian scenario, keeping in mind the biocompatibility and longevity of the treatment. As per literature light cure, gum staining is one of the techniques for masking denture base color and imparting natural color to mucosa but considering the cost involved many patients requiring aesthetic enhancement of prosthesis avoid going for such treatment thereby compromising their aesthetic. the present case series describe an innovative cost-effective alternative to the previously describe technique for masking the denture base color by using composite mixed with stains to replicate the natural apparatus.

scholarly journals Selection of optimal data placement using cloud infrastructure

2021 ◽  
pp. 34-42
Author(s):  
Vladimir Meikshan ◽  
◽  
Natalia Teslya ◽  
Keyword(s):  
Mathematical Model ◽  
Data Storage ◽  
Service Providers ◽  
Cloud Service ◽  
Cloud Services ◽  
Information Storage ◽  
Cloud Infrastructure ◽  
Digital Ecosystem ◽  
Cloud Service Providers ◽  
The Cost

Benefits of using cloud technology are obvious, their application is expanding, as a result, it determines the steady growth of demand. Cloud computing has acquired particular relevance for large companies connected with Internet services, retailing, logistics that generate large volume of business and other information. The use of cloud technologies allows organizing the joint consumption of resources, solving the problems of storing and transferring significant amounts of data. Russian consumer cooperation refers to large territory distributed organizations actively forming their own digital ecosystem. The issue of data storing and processing for consumer coo-peration organizations is very relevant. At the same time, the prices of cloud service providers are significantly different and require solving the problem of minimizing the cost of storing and transferring significant amounts of data. The application of the linear programming method is considered to select the optimal data storage scheme for several cloud service providers having different technical and economic parameters of the package (maximum amount of storage, cost of allocated resources). Mathematical model includes the equation of costs for data storing and transferring and restrictions on the amount of storage, the amount of data and its safety. Software tool that allows to perform numerical calculations is selected Microsoft Excel in combination with the "search for solutions" add-on. In accordance with the mathematical model, the conditions for minimizing the amount of cloud storage costs and the necessary restrictions are established. Initial data are set for three data forming centers, storages of certain size for five cloud service providers and nominal price for information storage and transmission. Calculations of expenses are performed in several variants: without optimization, with the solution of the optimization problem, with price increase by cloud service providers. Results of the calculations confirm the necessity to solve the problem of minimizing the cost of cloud services for corporate clients. The presented model can be expanded for any cost conditions as well as for different areas of cloud applications.

scholarly journals Protection of computers from side electromagnetic radiation during monitor images formation

2021 ◽  
Vol 4 (4) ◽  
pp. 377-385
Author(s):  
Volodymyr M. Lucenko ◽  
Dmytro O. Progonov
Keyword(s):  
Electromagnetic Radiation ◽  
Ad Hoc ◽  
Low Cost ◽  
Cost Effective ◽  
Switching Speed ◽  
Cost Effective Approach ◽  
Alternative Approach ◽  
Confidential Data ◽  
The Cost ◽  
Communication Lines

Reliable protection of confidential data processed in critical information infrastructure elements of public institutions and private organizations is topical task today. Of particular interest are methods to prevent the leakage of confidential data by localizing informative (dangerous) signals that both carry an informative component, and have a signal level higher than predefined threshold. The increase in signal energy from personal computers is caused by increasing of its transistors switching speed. Modern passive shielding methods for secured computers, similar to the well-known program TEMPEST, require either costly and large shielding units or technological simplification by using of low-cost fragmentary shielding of computer’s individual elements. Therefore, localization of side electromagnetic radiation produced by personal computer is needed. The paper presents a cost-effective approach to reducing the level of computer’s electromagnetic radiation by passive method. The radiation are localized and measured by its estimation on personal computer’s elements, namely unshielded communication lines between video processor and a monitor, fragments of electric tracks on motherboards, etc. During experiments authors used ad-hoc miniature electric (ball antenna) and magnetic (Hall sensor) antennas connected to selective voltmeters. This approach significantly reduces the cost of equipment and measurements as well as requirements to analytics’ qualification for improving computer’s protection. Also, the alternative approach for computer protection is proposed. The approach is based on image content protection by distorting the image on the monitor instead of reducing electromagnetic radiation caused by signals from the monitor. The protection includes image scrambling using Arnold transform that randomly “shuffle” the lines in each frame.

Method of Fuels and Lubricants Performance Properties Requirements Management

2021 ◽  
Vol 624 (2) ◽  
pp. 16-24
Author(s):  
Yu. M. Pimenov ◽  
◽  
A. V. Ulit’ko ◽  
V. A. Sereda ◽  
◽  
...  
Keyword(s):  
Cost Effective ◽  
Life Cycles ◽  
Requirements Management ◽  
Performance Properties ◽  
Operational Conditions ◽  
Quantitative Expression ◽  
Laboratory Bench ◽  
Motor Fuels ◽  
Cost Effective Method ◽  
The Cost

The cost-effective method of fuels and lubricants performance properties requirements management is proposed. Method ensures effectiveness enhancement of equipment and of fuels and lubricants life cycles; it includes requirements establishment (constructing of conceptual and empirical models of requirements), their quantitative expression through highly informative indicators of fuels and lubricants propensity for transformations, then approbation with the use of laboratory, bench and test stands tests, specification, assessment of realization in real world equipment operational conditions, effectiveness evaluation and modification of requirements. Some illustrations of application of the new method phases with regards to motor fuels and hydraulic fluid are provided.

Cost Comparison of Fan-Out WLP vs. Embedded Die

2011 ◽  
Vol 2011 (DPC) ◽  
pp. 001003-001018
Author(s):  
Alan Palesko ◽  
Jan Vardaman
Keyword(s):  
Cost Model ◽  
Form Factors ◽  
Cost Effective ◽  
Cost Comparison ◽  
Package Design ◽  
Supply Chain Logistics ◽  
Cost Effective Approach ◽  
Large Production ◽  
The Cost ◽  
Cost Differences

Fabricating the package after the die is placed can result in smaller form factors, increased performance, and improved supply chain logistics for OEMs. There are many different approaches for this packaging technique, but two of the most prominent are Fan-Out WLP and Embedded Die. Fan-Out WLP leverages existing semiconductor technology for a cost effective approach to achieve relatively tight package design rules. The Embedded Die strategy leverages existing PCB lamination technology for cost-reduction through scale: fabricating many small packages on large production panels. We will examine the cost differences and similarities between Fan-Out WLP and Embedded Die strategies by developing a comprehensive cost model for each technology. We will then analyze the manufacturing costs (labor, material, depreciation, yield loss, and tooling) and yield impacts across a variety of designs to demonstrate the cost differences and similarities in each packaging technology.

scholarly journals Use of Targeted Amplicon Sequencing in Peanut to Generate Allele Information on Allotetraploid Sub-Genomes

Genes ◽  
2020 ◽  
Vol 11 (10) ◽  
pp. 1220
Author(s):  
Roshan Kulkarni ◽  
Ratan Chopra ◽  
Jennifer Chagoya ◽  
Charles E. Simpson ◽  
Michael R. Baring ◽  
...  
Keyword(s):  
Cost Effective ◽  
Amplicon Sequencing ◽  
Routine Practice ◽  
Specific Information ◽  
Illumina Hiseq ◽  
Breeding Programs ◽  
Polymorphic Snps ◽  
Cost Effective Approach ◽  
A Genome ◽  
The Cost

The use of molecular markers in plant breeding has become a routine practice, but the cost per accession can be a hindrance to the routine use of Quantitative Trait Loci (QTL) identification in breeding programs. In this study, we demonstrate the use of targeted re-sequencing as a proof of concept of a cost-effective approach to retrieve highly informative allele information, as well as develop a bioinformatics strategy to capture the genome-specific information of a polyploid species. SNPs were identified from alignment of raw transcriptome reads (2 × 50 bp) to a synthetic tetraploid genome using BWA followed by a GATK pipeline. Regions containing high polymorphic SNPs in both A genome and B genomes were selected as targets for the resequencing study. Targets were amplified using multiplex PCR followed by sequencing on an Illumina HiSeq. Eighty-one percent of the SNP calls in diploids and 68% of the SNP calls in tetraploids were confirmed. These results were also confirmed by KASP validation. Based on this study, we find that targeted resequencing technologies have potential for obtaining maximum allele information in allopolyploids at reduced cost.

A cost effective approach to stormwater management? source control and distributed storage

1997 ◽  
Vol 36 (8-9) ◽  
pp. 307-311 ◽  
Author(s):  
R. Y. G. Andoh ◽  
C. Declerck
Keyword(s):  
Large Scale ◽  
Traditional Approach ◽  
Distributed Storage ◽  
Cost Effective ◽  
Source Control ◽  
Slowing Down ◽  
Surface Areas ◽  
Cost Effective Approach ◽  
Receiving Waters ◽  
The Cost

Rapid urbanisation and its consequent increase in impermeable surface areas and changes in land use has generally resulted in problems of flooding and heavy pollution of urban streams and other receiving waters. This has often been coupled with ground water depletion and a threat to water resources. The first part of this paper presents an alternative drainage philosophy and strategy which mimics nature's way by slowing down (attenuating) the movement of urban runoff. This approach results in cost-effective, affordable and sustainable drainage schemes. The alternative strategy can be described as one of prevention rather than cure by effecting controls closer to source rather than the traditional approach which results in the transfer of problems downstream, resulting in its cumulation and the need for large scale, centralised control. The second part describes a research project which has been launched in order to quantify the cost and operational benefits of source control and distributed storage. Details of the methodology of the modelling and simulation processes which are being followed to achieve this target are presented.

scholarly journals Assessing Effectiveness and Costs in Robot-Mediated Lower Limbs Rehabilitation: A Meta-Analysis and State of the Art

2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Giorgio Carpino ◽  
Alessandra Pezzola ◽  
Michele Urbano ◽  
Eugenio Guglielmelli
Keyword(s):  
Meta Analysis ◽  
Cost Effective ◽  
Conventional Approach ◽  
Lower Limbs ◽  
Secondary Outcome ◽  
Robotic Rehabilitation ◽  
Wearable Robots ◽  
Cost Effective Approach ◽  
Significant Difference ◽  
The Cost

Robots were introduced in rehabilitation in the 90s to meet different needs, that is, reducing the physical effort of therapists. This work consists of a meta-analysis of robot-mediated lower limbs rehabilitation for stroke-affected patients; it aims at evaluating the effectiveness of the robotic approach through the use of wearable robots or operational machines with respect to the conventional approach (i.e., manual rehabilitation therapy). The primary assessed outcome is the patient’s ability to recover walking independence, whereas the secondary outcome is the average walking speed. The therapy acceptability and the treatment costs are also assessed. The assessment shows that the robot-mediated therapy is more effective than the conventional one in reaching the primary outcome. As for the secondary outcome, there is no significant difference between the robotic (wearable robots or operational machines) and the conventional approach. Rehabilitation using wearable robots has a greater acceptability than the conventional one. This does not apply to operational machines. The cost of robotic treatment with wearable robots ranges from double to triple the cost of the conventional approach. On the contrary, rehabilitation using operational machines costs the same as the conventional treatment. Robotic rehabilitation based on operational machines is the most cost-effective approach.

Sign in / Sign up

Export Citation Format

Share Document