Analysis of Internal Flow Field for Centrifugal Fan in Series

2012 ◽  
Vol 233 ◽  
pp. 96-99
Author(s):  
Ya Jun Fan ◽  
Zhang Xu ◽  
Ding Wensi
Keyword(s):  
Velocity Distribution ◽  
Total Pressure ◽  
Flow Characteristics ◽  
Internal Flow ◽  
Wind Pressure ◽  
Meridian Plane ◽  
Centrifugal Fan ◽  
Fan Performance ◽  
In Series ◽  
The Impact

Centrifugal fan in series with high wind pressure is the key facility of pneumatic transport equipment. To consider the impact of changed conditions on performance of centrifugal fan, internal flow of three-stage centrifugal fan at rated speed in different total pressure conditions is analyzed by CFD software FLUENT6.3 in this paper. Flow characteristics are obtained and the differences of total pressure and velocity distribution in each impeller are analyzed under different conditions, velocity distribution on the meridian plane and section of wind guide plates are compared. Finally, curves of P-Q and P-η at 4600 r/min are forecasted through the analysis of the data, which provide references for reducing impact that condition alteration on fan performance and improving the efficiency of the fan.

Blade shape optimization and internal-flow characteristics of the backward non-volute centrifugal fan

2021 ◽  
pp. 095765092110527
Author(s):  
Hongjie Zhang ◽  
Zhengdao Wang ◽  
Hui Yang ◽  
Zuchao Zhu ◽  
Yikun Wei
Keyword(s):  
Total Pressure ◽  
Gradient Descent ◽  
Flow Characteristics ◽  
Internal Flow ◽  
Descent Method ◽  
High Flow ◽  
Steepest Descent ◽  
Steepest Descent Method ◽  
Centrifugal Fan ◽  
Blade Profile

The work proposed the double parameter optimization method of the non-volute centrifugal fan’s blade profile based on the steepest descent method. Total-pressure efficiency improvement at the high-flow area was taken as an optimization objective. A method of applying the steepest descent method to modify the blade profile of backward centrifugal fan is proposed in this paper. The gradient descent direction was analyzed to design the blade profile and obtain the optimal blade profile at a high-flow rate. Besides, numerical simulations were carried out to analyze the aerodynamic performance and the internal flow characteristics of the centrifugal fan by the computational fluid dynamics method. Numerical results showed that the blade profile along the gradient descent was optimized to effectively increase the total pressure and the total pressure efficiency of the original model at the high-flow rate. The steepest descent method for local optimization could improve the fan blade design.

scholarly journals Numerical Simulation and Experimental Study on Flow Field in a Swirl Nozzle

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Yicheng Sun ◽  
Yufan Fu ◽  
Baohui Chen ◽  
Jiaxing Lu ◽  
Wanquan Deng
Keyword(s):  
Flow Field ◽  
Velocity Distribution ◽  
Flow Characteristics ◽  
Internal Flow ◽  
Low Pressure ◽  
External Flow ◽  
Droplet Velocity ◽  
Inlet Pressure ◽  
Outlet Section ◽  
Local Pressure

In order to study the internal flow characteristics and external droplet velocity distribution characteristics of the swirl nozzle, the following methods were used: numerical simulations were used to study the internal flow characteristics of a swirl nozzle and phase Doppler particle velocimetry was used to determine the corresponding external droplet velocity distribution under medium and low pressure conditions. The distributions of pressure and water velocity inside the nozzle were obtained. Meanwhile, the velocities of droplets outside the nozzle in different sections were discussed. The results show that the flow rate in the swirl nozzle increases with the increase in inlet pressure, and the local pressure in the region decreases because of the excessive velocity at the internal outlet section of the swirl nozzle, resulting in cavitation. The experimental results show that under an external flow field, the minimum droplet velocity occurs in the axial direction; starting from the axis, the velocity first increases and then decreases along the radial direction. Swirling motion inside the nozzle and velocity variations in the external flow field occur under medium and low pressure conditions. The relationship between the inlet pressure and the distributions of water droplets’ velocities was established, which provides a reference for the research and development of the swirl nozzle.

Influences of Splitter Blades on the Centrifugal Fan Performances

1989 ◽  
Author(s):  
Lichuan Gui ◽  
Chuangang Gu ◽  
Hongshou Chang
Keyword(s):  
Solution Method ◽  
Pressure Coefficient ◽  
Internal Flow ◽  
Experimental Result ◽  
Centrifugal Fan ◽  
Fan Performance ◽  
Load Distributions ◽  
Result Show ◽  
Engineering Practices ◽  
Approximate Solution Method

Centrifugal fan and compressors with splitter blades are widely utilized in engineering practices. A detail investigation of the influences of splitter blades on a forward-curved centrifugal fan performances is presented in the paper. The study includes two parts: experiment and numerical calculation. The experiments were produced in a specific impeller with adjustable splitter blades in order to get the performances in different conditions. The internal flow field in the impeller was calculated by means of FEASM (Finite Element Approximate Solution Method, Gu, 1984). The experimental result show that changing the circumferential positions of the splitter blades has a noticeble influence on the fan performance, the incidence of splitter blades also has a certain effect on it, and properly lengthened splitter blades can raise the total pressure coefficient. The velocity and load distributions on the blade surfaces calculated can be used to analyse the phenomena above satisfactorily.

Numerical Investigation of Positive Displacement Rotary Lobe Pump With Twisted Rotors

2014 ◽  
Author(s):  
Xiaojun Jiang ◽  
Yi Li ◽  
Zhaohui He ◽  
Cui Baoling ◽  
Wenlong Dong
Keyword(s):  
Flow Structure ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Internal Flow ◽  
Dynamic Flow ◽  
Flow Fluctuation ◽  
Flow Field Characteristics ◽  
Lobe Pump ◽  
The Impact

The three-dimensional flow field characteristics are obtained by performing numerical simulation of flow in a lobe pump with twisted rotors. The relationship between the dynamic flow structure and the flow fluctuation is explored. Actually, the viscous incompressible Navier-Stokes equations are solved within an unsteady flow model. The dynamic mesh technique is applied to obtain the dynamic flow structure. By comparing the simulated results of straight rotor with those of twisted rotor, the effect of rotor shape on the flow fluctuation was revealed. Finally, the impact of the lobes number of rotors on flow pulsations is discussed. The results show that there is an intrinsic relationship between the flow fluctuation and the vortex in the lobe pump. The use of twisted rotors can effectively improve the internal flow characteristics of lobe pump and reduce flow fluctuation. With the increase of the number of lobes, the lobe pump output is more stable and capacity has been improved.

Internal flow and external jet characteristics of double serpentine nozzle with different aspect ratio

2017 ◽  
Vol 233 (2) ◽  
pp. 545-560 ◽  
Author(s):  
Sun Xiao-lin ◽  
Wang Zhan-xue ◽  
Zhou Li ◽  
Shi Jing-wei ◽  
Cheng Wen
Keyword(s):  
Aspect Ratio ◽  
Flow Characteristics ◽  
Internal Flow ◽  
Critical Parameters ◽  
Potential Core ◽  
Suppression Effect ◽  
Symmetric Plane ◽  
Flow Features ◽  
In Series ◽  
Jet Characteristics

In order to increase the survivability of the fighter aircraft, the serpentine nozzle has been applied in series of stealth bombers and unmanned aerial vehicles due to its excellent potentiality of evidently suppressing the infrared radiation signatures and radar cross section emitted by engine exhausts. Among the geometric parameters of the serpentine nozzle, the aspect ratio (AR) at the nozzle exit is one of the most critical parameters for the nozzle design as the infrared suppression effect could be greatly enhanced with the increment of AR by strengthening the mixing between the exhaust plume and atmosphere; the aim of this paper is to study the influence of the AR on the flow characteristics of the double serpentine nozzle. The flow features of six double serpentine convergent nozzles, i.e. AR = 3, 5, 7, 9, 11, 15 respectively, were numerically simulated with the shear stress transport κ–ω turbulent model adopted, which had been validated by the experimental data. The characteristics of internal flow and external jet, and the aerodynamic performances of these six nozzles were compared. Results show that the Ma contours at the symmetric plane are different due to the distinct flow accelerations caused by the change of the curvature and the duct height for diverse AR, and the surface pressure and the shock wave features are different correspondingly. The lateral divergence and the lateral convergence characteristics of the nozzle configuration lead to opposite lateral flow under diverse AR, and the change of lateral width induced different lateral pressure gradient, then lead to various lateral vortex distributions. The length of potential core is the contribution of the comprehensive effects of geometry parameters, and it is decreased with the increase of AR due to the dominated effect of the increased mixing area; however, the declining rate is slowed down. The AR of 5 should be chosen for the best aerodynamic performance of the double serpentine nozzle under the qualifications to completely shield the high-temperature turbine.

scholarly journals Unsteady Characteristics of Forward Multi-Wing Centrifugal Fan at Low Flow Rate

Processes ◽  
2019 ◽  
Vol 7 (10) ◽  
pp. 691 ◽  
Author(s):  
Lun ◽  
Ye ◽  
Lin ◽  
Ying ◽  
Wei
Keyword(s):  
Unsteady Flow ◽  
Flow Rate ◽  
Flow Characteristics ◽  
Internal Flow ◽  
Boundary Layer Separation ◽  
Low Flow ◽  
Centrifugal Fan ◽  
Suction Surface ◽  
Cfd Method ◽  
Low Flow Rate

The unsteady flow characteristics of a forward multi-wing centrifugal fan under a low flow rate are studied using the computational fluid dynamics (CFD) method. This paper emphasizes the eddy current distribution in terms of the Q criterion method, as well as pressure fluctuation, frequency spectrum, and kinetic energy spectrum analysis of internal monitoring points in a forward multi-wing centrifugal fan. The numerical results show that abnormal eddies mainly appear at the volute outlet and near the volute tongue, boundary layer separation occurs near the suction surface of the blade, and shedding eddies appear at the trailing edge of the blade with the time evolution. The unsteady flow characteristics of a forward multi-wing centrifugal fan at a small flow rate provide significant physical insight into understanding the internal flow law.

scholarly journals Unsteady Flow Characteristics of Rotating Stall and Surging in a Backward Centrifugal Fan at Low Flow-Rate Conditions

Processes ◽  
2020 ◽  
Vol 8 (7) ◽  
pp. 872 ◽  
Author(s):  
Biao Zhou ◽  
Ximing He ◽  
Hui Yang ◽  
Zuchao Zhu ◽  
Yikun Wei ◽  
...  
Keyword(s):  
Unsteady Flow ◽  
Flow Rate ◽  
Flow Characteristics ◽  
Internal Flow ◽  
Rotating Stall ◽  
Low Flow ◽  
Small Scale ◽  
Centrifugal Fan ◽  
Unsteady Characteristics ◽  
Low Flow Rate

The steady and unsteady flow characteristics of internal flow in a backward centrifugal fan of double inlet at low flow-rate condition are investigated by computational fluid dynamics in this paper. The investigation aims to reveal insights into generation mechanisms and our physical understanding of the rotating stall and surge. The numerical results mainly demonstrate that, with decreasing flow rate, a large number of vortex flows almost increasingly occupy the internal flow of the impeller. The reverse flow and separation vortices increasingly appear near the outlet of volute, and the internal flow of the impeller is completely blocked by the separated vortex flow at low flow-rate conditions. Results indicate that, due to a synchronization of the impeller rotation and separation vortex, these separated vortices act intensely on the pressure surface of the blade with time evolution, and the interaction between the separated vortices and surface of blade increasingly yields small-scale eddies. It is further found that the amplitude of pressure and velocity fluctuations gradually increase with the decrease of flow rate in a certain range. The unsteady characteristics acting on the volute tongue gradually increase in a range of Qd to 0.3 Qd (Qd is the design volume flow rate) with the decrease of flow rate, and the unsteady characteristics acting on the volute tongue are weakened at the working condition of 0.15 Qd. These insights clearly explain the unsteady nature of the rotating stall and surge phenomenon in the double inlet backward centrifugal fan.

Characterization of hydraulic flow patterns in facultative aerated lagoons

1996 ◽  
Vol 34 (11) ◽  
pp. 99-106 ◽  
Author(s):  
N. C. Dorego ◽  
R. Leduc
Keyword(s):  
Flow Characteristics ◽  
Statistical Technique ◽  
Good Prediction ◽  
Hydraulic Flow ◽  
Long Tails ◽  
In Series ◽  
Flow Through ◽  
The Impact ◽  
Dispersion Number

A tracer study was conducted in the winter at the Sainte Julie (Quebec, Canada) lagoon facilities to ascertain the hydraulic flow characteristics. The lagoon system is a continuous discharge type consisting of three facultative aerated lagoons and a maturation pond operating in series. The first three are provided with bottom air diffusers, the number of which decreases from the first to the third lagoon. C-diagrams indicate significant short-circuiting for all lagoons. Long tails in the C-diagrams of lagoons 1, 2, and 3 suggest the presence of stagnant or dead regions within them reducing the effective volume of the lagoons and hence the treatment efficiency that could otherwise be achieved. Values of the dispersion number, d, were 0.392, 0.452, 0.283, and 0.487 for lagoons 1, 2, 3, and 4, respectively. The jacknife statistical technique is used to assess the impact of influent flow variations on the dispersion number. Fluid flow pattern in the lagoons does not follow the simple “flow-through” behaviour. Rather, circulatory patterns are superposed on this as indicated by the multiple-peaked C-diagrams. Also, the Polprasert and Bhattarai model gives good prediction of the dispersion number for aerated lagoons.

Study on Appropriate Diameter of Centrifugal Fan Surrounded by Heat Exchanger in Air Conditioner

2017 ◽  
Author(s):  
Daiwa Sato ◽  
T. Iwase ◽  
J. Xue ◽  
K. Tsuchihashi ◽  
H. Obara ◽  
...  
Keyword(s):  
Heat Exchanger ◽  
Heat Exchange ◽  
Standard Deviation ◽  
Pressure Drop ◽  
Velocity Distribution ◽  
Flow Distribution ◽  
Centrifugal Fan ◽  
Air Conditioner ◽  
Air Conditioners ◽  
Fan Performance

To meet the demand for energy-saving air conditioners, the pressure drop must be reduced and the air velocity distribution of the heat exchanger made uniform to improve the performance of both the fan and the heat exchange cycle. To investigate the effect of the fan on the pressure drop and the velocity distribution, we changed the fan diameter and fixed the shape of the heat exchanger. First, we investigated the fan by comparing the total pressure efficiency when the fan was mounted in an indoor unit and unmounted as a standalone fan. We found that the mounted fan performed worse than the standalone fan. The difference between these conditions was whether the heat exchanger was around the fan. Next, to determine the appropriate diameter, the performance of the mounted fan was evaluated by measuring its efficiency and the fan power. The diameter with the highest efficiency differed from the diameter with the lowest fan power. Because of this, the fan performance was strongly affected by the heat exchanger and the vortex. When the standard deviation of the air flow distribution in the heat exchanger was evaluated, the diameter with the lowest standard deviation was the same as the diameter with the lowest fan power. Since the standard deviation needs to be reduced to improve the performance of both the fan and the heat exchange cycle, the mounting conditions need to be considered to determine the fan shape. Thus, the flow field around the fan was visualized, and the velocity distributions for the investigated diameters were compared. We found the distance between the fan and the heat exchanger was an important factor determining the performance. A fan with the most appropriate diameter was prototyped to evaluate the fan performance. Results revealed it used 3% less power than a standard-diameter fan.

Numerical Simulation on Effect of Volute Width on Performance of a Centrifugal Fan

2012 ◽  
Vol 538-541 ◽  
pp. 686-689
Author(s):  
Yu Kun Lv ◽  
Bao Jun Song ◽  
Tong Chang Lu
Keyword(s):  
Numerical Simulation ◽  
Flow Characteristics ◽  
Internal Flow ◽  
Design Flow ◽  
Centrifugal Fan ◽  
Contrastive Analysis ◽  
Optimization Principle ◽  
And Performance ◽  
Performance Results ◽  
Full Pressure

Taking the G4-73№8D centrifugal fan as research object and utilizing the software of NUMECA to simulate flow fields of volute with different widths, the parameters of width are optimized through contrastive analysis of the effects on internal flow characteristics and performance. Results show that the optimized scheme can improve the uniformity of internal flow field, full pressure and efficiency seperatly increase by 0.52% and 0.48% under the design flow. For the needs of variable fan load operation, this paper puts forward the optimization principle of width parameter.

Sign in / Sign up

Export Citation Format

Share Document