Translation Motion and Dynamic Analysis of Ancient Architecture

2012 ◽  
Vol 253-255 ◽  
pp. 3-7
Author(s):  
Tie Cheng Wang ◽  
Liang Zhang ◽  
Hai Long Zhao
Keyword(s):  
Energy Dissipation ◽  
Free Vibration ◽  
Dynamic Analysis ◽  
Dynamic Force ◽  
Vibration Period ◽  
Translation Motion ◽  
Energy Dissipation Capacity ◽  
The Right ◽  
Jacking Force ◽  
The Temple

Reasonable formula of jacking force and scientific dynamic analysis has an important contribution to guide the building monolithic moving Engineering. In this paper, take the temple as an example to study building monolithic movement. It is shown in the analysis results of SAP2000 that the mortise-tenon joints (in the wooden structure) has a significant influence in improving the energy dissipation capacity, prolonging the structural free vibration period,minimizing the dynamic response of structure. The acceleration of all the joints tends to be in consistent under the dynamic force effect. The structure has enough safety capacity within the right displacement margin for joints.

A New Type of Hybrid-Passive-Damper

2010 ◽  
Vol 163-167 ◽  
pp. 4367-4372
Author(s):  
Ai Rong Liu ◽  
Qi Cai Yu ◽  
Yuan Yao ◽  
Yu Zhu Guo
Keyword(s):  
Energy Dissipation ◽  
Damping Ratio ◽  
Loading Frequency ◽  
Vibration Period ◽  
Equivalent Damping ◽  
Passive Damper ◽  
New Type ◽  
Energy Dissipation Capacity ◽  
Relationship Of ◽  
The Relationship

This paper investigated the superelasticity and hysteresis characteristics of TiNi shape memory alloy ( SMA ) wire at room temperature, then the mechanical parameters of which were obtained. Based on the TiNi SMA wire and a purchased viscous damper, a new type of hybrid-passive-damper was designed and developed. Experiments were performed in order to validate the relationship of loading frequency and characteristic parameters such as energy dissipation capacity, equivalent damping ratio and equivalent stiffness. Experimental results show that hybrid-passive-damper designed in this paper has excellent energy dissipation capacity and is suitable for the vibration control of structures with long vibration period.

scholarly journals Experimental and Numerical Analysis of the Mechanical Properties of a Pretreated Shape Memory Alloy Wire in a Self-Centering Steel Brace

Processes ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 80
Author(s):  
Bo Zhang ◽  
Sizhi Zeng ◽  
Fenghua Tang ◽  
Shujun Hu ◽  
Qiang Zhou ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Elastic Modulus ◽  
Energy Dissipation ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
Loading Rate ◽  
Effective Elastic Modulus ◽  
Maximum Energy ◽  
Numerical Results ◽  
Energy Dissipation Capacity

As a stimulus-sensitive material, the difference in composition, fabrication process, and influencing factors will have a great effect on the mechanical properties of a superelastic Ni-Ti shape memory alloy (SMA) wire, so the seismic performance of the self-centering steel brace with SMA wires may not be accurately obtained. In this paper, the cyclic tensile tests of a kind of SMA wire with a 1 mm diameter and special element composition were tested under multi-working conditions, which were pretreated by first tensioning to the 0.06 strain amplitude for 40 cycles, so the mechanical properties of the pretreated SMA wires can be simulated in detail. The accuracy of the numerical results with the improved model of Graesser’s theory was verified by a comparison to the experimental results. The experimental results show that the number of cycles has no significant effect on the mechanical properties of SMA wires after a certain number of cyclic tensile training. With the loading rate increasing, the pinch effect of the hysteresis curves will be enlarged, while the effective elastic modulus and slope of the transformation stresses in the process of loading and unloading are also increased, and the maximum energy dissipation capacity of the SMA wires appears at a loading rate of 0.675 mm/s. Moreover, with the initial strain increasing, the slope of the transformation stresses in the process of loading is increased, while the effective elastic modulus and slope of the transformation stresses in the process of unloading are decreased, and the maximum energy dissipation capacity appears at the initial strain of 0.0075. In addition, a good agreement between the test and numerical results is obtained by comparing with the hysteresis curves and energy dissipation values, so the numerical model is useful to predict the stress–strain relations at different stages. The test and numerical results will also provide a basis for the design of corresponding self-centering steel dampers.

scholarly journals Experimental/Numerical Evaluation of Steel Trapezoidal Corrugated Infill Panels with an Opening

2021 ◽  
Vol 11 (7) ◽  
pp. 3275
Author(s):  
Majid Yaseri Gilvaee ◽  
Massood Mofid
Keyword(s):  
Energy Dissipation ◽  
Ultimate Strength ◽  
Steel Plate ◽  
Shear Walls ◽  
Experimental Results ◽  
Structural Performance ◽  
Initial Stiffness ◽  
Infill Panels ◽  
Energy Dissipation Capacity ◽  
Ductility Ratio

This paper investigates the influence of an opening in the infill steel plate on the behavior of steel trapezoidal corrugated infill panels. Two specimens of steel trapezoidal corrugated shear walls were constructed and tested under cyclic loading. One specimen had a single rectangular opening, while the other one had two rectangular openings. In addition, the percentage of opening in both specimens was 18%. The initial stiffness, ultimate strength, ductility ratio and energy dissipation capacity of the two tested specimens are compared to a specimen without opening. The experimental results indicate that the existence of an opening has the greatest effect on the initial stiffness of the corrugated steel infill panels. In addition, the experimental results reveal that the structural performance of the specimen with two openings is improved in some areas compared to the specimen with one opening. To that end, the energy dissipation capacity of the specimen with two openings is obtained larger than the specimen with one opening. Furthermore, a number of numerical analyses were performed. The numerical results show that with increasing the thickness of the infill plate or using stiffeners around the opening, the ultimate strength of a corrugated steel infill panel with an opening can be equal to or even more than the ultimate strength of that panel without an opening.

scholarly journals Estimation of Additional Equivalent Damping Ratio of the Damped Structure Based on Energy Dissipation

2019 ◽  
Vol 2019 ◽  
pp. 1-14
Author(s):  
Xiuyan Hu ◽  
Qingjun Chen ◽  
Dagen Weng ◽  
Ruifu Zhang ◽  
Xiaosong Ren
Keyword(s):  
Energy Dissipation ◽  
Damping Ratio ◽  
Theoretical Concept ◽  
Estimation Methods ◽  
External Excitation ◽  
Single Degree Of Freedom ◽  
Equivalent Damping ◽  
Seismic Motion ◽  
Practical Engineering ◽  
Energy Dissipation Capacity

In the design of damped structures, the additional equivalent damping ratio (EDR) is an important factor in the evaluation of the energy dissipation effect. However, previous additional EDR estimation methods are complicated and not easy to be applied in practical engineering. Therefore, in this study, a method based on energy dissipation is developed to simplify the estimation of the additional EDR. First, an energy governing equation is established to calculate the structural energy dissipation. By means of dynamic analysis, the ratio of the energy consumed by dampers to that consumed by structural inherent damping is obtained under external excitation. Because the energy dissipation capacity of the installed dampers is reflected by the additional EDR, the abovementioned ratio can be used to estimate the additional EDR of the damped structure. Energy dissipation varies with time, which indicates that the ratio is related to the duration of ground motion. Hence, the energy dissipation during the most intensive period in the entire seismic motion duration is used to calculate the additional EDR. Accordingly, the procedure of the proposed method is presented. The feasibility of this method is verified by using a single-degree-of-freedom system. Then, a benchmark structure with dampers is adopted to illustrate the usefulness of this method in practical engineering applications. In conclusion, the proposed method is not only explicit in the theoretical concept and convenient in application but also reflects the time-varying characteristic of additional EDR, which possesses the value in practical engineering.

Dynamic Force and Torque Analysis of Spherical Four Link Mechanisms

1983 ◽  
Vol 105 (3) ◽  
pp. 492-497 ◽  
Author(s):  
A. T. Yang ◽  
Sun Zhishang
Keyword(s):  
Dynamic Analysis ◽  
Optimum Design ◽  
Mass Distribution ◽  
High Speed ◽  
Dynamic Force ◽  
Arbitrary Mass ◽  
Link Mechanism ◽  
Torque Analysis ◽  
Analytical Expressions

In this paper we present a dynamic analysis of a general spherical four-link mechanism whose links have arbitrary mass distribution. Results, which are in explicit analytical expressions in terms of inertia-induced forces and moments in links, are useful for optimum design of the mechanism under high-speed operation.

A combined experimental and numerical analysis on the seismic behavior of short reinforced concrete columns with different structural sizes and axial compression ratios

2017 ◽  
Vol 27 (9) ◽  
pp. 1416-1447 ◽  
Author(s):  
Liu Jin ◽  
Shuai Zhang ◽  
Dong Li ◽  
Haibin Xu ◽  
Xiuli Du ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Energy Dissipation ◽  
Axial Compression ◽  
Seismic Behavior ◽  
Load Capacity ◽  
Concrete Columns ◽  
Simulation Method ◽  
Reinforced Concrete Columns ◽  
Mesoscopic Simulation ◽  
Energy Dissipation Capacity

The results of an experimental program on eight short reinforced concrete columns having different structural sizes and axial compression ratios subjected to monotonic/cyclic lateral loading were reported. A 3D mesoscopic simulation method for the analysis of mechanical properties of reinforced concrete members was established, and then it was utilized as an important supplement and extension of the traditional experimental method. Lots of numerical trials, based on the restricted experimental results and the proposed 3D mesoscopic simulation method, were carried out to sufficiently evaluate the seismic performances of short reinforced concrete columns with different structural sizes and axial compression ratios. The test results indicate that (1) the failure pattern of reinforced concrete columns can be significantly affected by the shear-span ratio; (2) increasing the axial compression ratio could improve the load capacity of the reinforced concrete column, but the deformation capacity would be restricted and the failure mode would be more brittle, consequently the energy dissipation capacity could be deteriorated; and (3) the load capacity, the displacement ductility, and the energy dissipation capacity of the short reinforced concrete columns all exhibit clear size effect, namely, the size effect could significantly affect the seismic behavior of reinforced concrete columns.

Research on the Joint of Concrete-Filled Steel Tubular Column and Steel Beam

2013 ◽  
Vol 351-352 ◽  
pp. 174-178
Author(s):  
Ying Zi Yin ◽  
Yan Zhang
Keyword(s):  
Energy Dissipation ◽  
Failure Mechanism ◽  
Compression Ratio ◽  
Seismic Behavior ◽  
Strength Degradation ◽  
Steel Beam ◽  
Failure Characteristics ◽  
Static Test ◽  
Axial Compression Ratio ◽  
Energy Dissipation Capacity

With the pseudo-static test of 4 concrete-filled square steel tubular column and steel beam joint with outer stiffened ring, this paper discusses the failure characteristics, failure mechanism and seismic behavior of joints under different axial compression ratio. The analysis of the testing results shows: when reached the ultimate strength, the strength degradation and stiffness degradation of joints are slowly and the ductility is also good, the energy dissipation capacity of joints is much better.

PRELIMINARY STUDY ON NOVEL BEAM-TO-COLUMN CONNECTION BASED ON SMA PLATE

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Michael CH Yam ◽  
Ke Ke ◽  
Ping Zhang ◽  
Qingyang Zhao
Keyword(s):  
Friction Coefficient ◽  
Energy Dissipation ◽  
Numerical Study ◽  
Numerical Models ◽  
Numerical Technique ◽  
The Self ◽  
Hysteretic Behavior ◽  
The Novel ◽  
Energy Dissipation Capacity ◽  
Preliminary Study

A novel beam-to-column connection equipped with shape memory alloy (SMA) plates has been proposed to realize resilient performance under low-to-medium seismic actions. In this conference paper, the detailed 3D numerical technique calibrated by the previous paper is adopted to examine the hysteretic behavior of the novel connection. A parametric study covering a reasonable range of parameters including the thickness of the SMA plate, friction coefficient between SMA plate and beam flange and pre-load of the bolt was carried out and the influence of the parameters was characterized. In addition, the effect of the SMA Belleville washer on the connection performance was also studied. The results of the numerical study showed that the initial connection stiffness and the energy-dissipation capacity of the novel connection can be enhanced with the increase of the thickness of the SMA plate. In addition, the initial connection stiffness and energy-dissipation behavior of the novel connection can be improved by increasing the friction coefficient or pre-load of bolts, whereas the increased friction level could compromise the self-centering behavior of the connection. The hysteretic curves of the numerical models of the connection also implied that the SMA washers may contribute to optimizing the connection behavior by increasing the connection stiffness and energy-dissipation capacity without sacrificing the self-centering behavior.

Sign in / Sign up

Export Citation Format

Share Document