The Fine-Structure Interpretation and Favorable Objective Evaluation of Quanyiduan in Fulongquan Area

2014 ◽  
Vol 529 ◽  
pp. 286-290
Author(s):  
Min Hou ◽  
Zhen Qin ◽  
Zhong Hao Wang
Keyword(s):  
Fine Structure ◽  
Oil And Gas ◽  
Comprehensive Evaluation ◽  
Signal To Noise Ratio ◽  
Objective Evaluation ◽  
High Signal ◽  
Velocity Mapping ◽  
Structural Interpretation ◽  
Target Layer ◽  
Exploration And Development

According to the needs of exploration and development, the main purpose of the Fulongquan region layer (Quanyiduan) to explain the fine structure and a favorable objective evaluation. Fine structural interpretation based on high-resolution, high fidelity and high signal to noise ratio of seismic data, the use of Landmark Interaction software layer on the purpose well - seismic calibration, determine the target layer of seismic reflection and seismic wave group phase characteristics of other wells in the area of information work carried out under the lateral auxiliary tracking method with variable velocity mapping layers of the structure plan aims to implement the target zone traps. In the structural interpretation based on the use of coherent technology and time slice for fault identification, combined with relevant geological data on the target layer of oil a comprehensive evaluation, selection of a good oil and gas traps, providing for the exploration and development goals.

XAS AND MCD STUDIES OF CrFe2O4

2002 ◽  
Vol 09 (02) ◽  
pp. 849-853 ◽  
Author(s):  
MASAICHIRO MIZUMAKI ◽  
AKANE AGUI ◽  
YUJI SAITOH ◽  
MAKOTO NAKAZAWA ◽  
TOMOHIRO MATSUSHITA ◽  
...  
Keyword(s):  
Fine Structure ◽  
Magnetic Circular Dichroism ◽  
Signal To Noise Ratio ◽  
High Signal ◽  
Transfer Model ◽  
Electron Configuration ◽  
Signal To Noise ◽  
Initial State ◽  
Switching Method ◽  
Charge Transfer Model

Magnetic circular dichroism (MCD) spectra of CrFe 2 O 4 have been measured by using the helicity switching method. The method achieves a high signal-to-noise ratio and resolved the fine structure in these spectra. The theoretical spectra, which were calculated by the charge transfer model, reproduced the experimental spectra. The origin of three negative peaks around the L3 edge in Cr 2p-MCD is attributed to the [Formula: see text] electron configuration in the initial state.

Feasibility of monitoring hydraulic fracturing using time-lapse audio-magnetotellurics

Geophysics ◽  
2012 ◽  
Vol 77 (4) ◽  
pp. WB119-WB126 ◽  
Author(s):  
Lanfang He ◽  
Xiumian Hu ◽  
Ligui Xu ◽  
Zhanxiang He ◽  
Weili Li
Keyword(s):  
Hydraulic Fracturing ◽  
Case History ◽  
Oil And Gas ◽  
Signal To Noise Ratio ◽  
Time Lapse ◽  
Microseismic Monitoring ◽  
High Signal ◽  
Hydraulic Fractures ◽  
Industry Waste ◽  
Fracturing Process

Hydraulic fracturing is widely used for initiating and subsequently propagating fractures in reservoir strata by means of a pressurized fluid to release oil and gas or to store industry waste. Downhole or surface microseismic monitoring is commonly used to characterize the hydraulically induced fractures. However, in some cases, downhole microseismic monitoring can be difficult due to the limitation imposed by boreholes. Surface microseismic monitoring often faces difficulties acquiring high signal-to-noise ratio data because of the on-site noise from hydraulic fracturing process. Research and field observations indicate that injecting conductive slurry or water into a strata may generate distinct time-lapse electromagnetic anomalies between pre- and posthydraulic fracturing. These anomalies provide a means for characterizing the hydraulic fracturing using time-lapse electromagnetic methods. We examined the time-lapse variation over an hour, one day, one month, and two years of observed audio-magnetotellurics (AMT) resistivity and the 1D and 3D AMT modeling result of the variation pre- and posthydraulic fracturing. There is also a successful case history of applying the time-lapse AMT to map hydraulic fractures. Observed data indicate that the variation of AMT resistivity is normally less than 6% apart from the data of the dead band and some noisy data. Modeling results show the variation pre- and posthydraulic fracturing is larger than 30% at the frequency point lower than 100 Hz. The case history indicates that time-lapse magnetotelluric monitoring may form a new way to characterize the hydraulic fracture.

A compact guided-wave EMAT with pulsed electromagnet for ferromagnetic tube inspection

2020 ◽  
Vol 64 (1-4) ◽  
pp. 951-958
Author(s):  
Tianhao Liu ◽  
Yu Jin ◽  
Cuixiang Pei ◽  
Jie Han ◽  
Zhenmao Chen
Keyword(s):  
Power Plants ◽  
Signal To Noise Ratio ◽  
Small Diameter ◽  
Performance Testing ◽  
Guided Wave ◽  
High Signal ◽  
Receiver Coil ◽  
Signal To Noise ◽  
Corrosion Defects

Small-diameter tubes that are widely used in petroleum industries and power plants experience corrosion during long-term services. In this paper, a compact inserted guided-wave EMAT with a pulsed electromagnet is proposed for small-diameter tube inspection. The proposed transducer is noncontact, compact with high signal-to-noise ratio and unattractive to ferromagnetic tubes. The proposed EMAT is designed with coils-only configuration, which consists of a pulsed electromagnet and a meander pulser/receiver coil. Both the numerical simulation and experimental results validate its feasibility on generating and receiving L(0,2) mode guided wave. The parameters for driving the proposed EMAT are optimized by performance testing. Finally, feasibility on quantification evaluation for corrosion defects was verified by experiments.

Application of Novel Low Current OBIRCH Amplifier and Nanoprobing to Identify Subtle Leakages in Advanced Node Technologies

2018 ◽  
Author(s):  
Satish Kodali ◽  
Liangshan Chen ◽  
Yuting Wei ◽  
Tanya Schaeffer ◽  
Chong Khiam Oh
Keyword(s):  
Signal To Noise Ratio ◽  
Semiconductor Industry ◽  
Fault Isolation ◽  
Ring Oscillator ◽  
High Signal ◽  
The Novel ◽  
Resistance Change ◽  
Three Samples ◽  
Relative Threshold ◽  
First Time

Abstract Optical beam induced resistance change (OBIRCH) is a very well-adapted technique for static fault isolation in the semiconductor industry. Novel low current OBIRCH amplifier is used to facilitate safe test condition requirements for advanced nodes. This paper shows the differences between the earlier and novel generation OBIRCH amplifiers. Ring oscillator high standby leakage samples are analyzed using the novel generation amplifier. High signal to noise ratio at applied low bias and current levels on device under test are shown on various samples. Further, a metric to demonstrate the SNR to device performance is also discussed. OBIRCH analysis is performed on all the three samples for nanoprobing of, and physical characterization on, the leakage. The resulting spots were calibrated and classified. It is noted that the calibration metric can be successfully used for the first time to estimate the relative threshold voltage of individual transistors in advanced process nodes.

scholarly journals Subjective Product Evaluation System Based on Kansei Engineering and Analytic Hierarchy Process

Symmetry ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1340 ◽  
Author(s):  
Yaxue Zuo ◽  
Zhenya Wang
Keyword(s):  
Evaluation System ◽  
Comprehensive Evaluation ◽  
Subjective Evaluation ◽  
Reliability And Validity ◽  
Objective Evaluation ◽  
Product Evaluation ◽  
Kansei Engineering ◽  
Analytic Hierarchy ◽  
Evaluation Indexes ◽  
Hierarchy Process

Product evaluation is very important for product improvement and development, and subjective product evaluation determines customer’s evaluation of products to some extent, so the purpose of this study is to establish a reasonable subjective product evaluation system. In this study, we comprehensively determine the evaluation indexes based on Kansei engineering (KE), establish an overall product evaluation system by using analytic hierarchy process (AHP), and establish the subjective product evaluation system by classifying the evaluation indexes in the overall product evaluation system into “objective evaluation index” and “subjective evaluation index”, removing the objective evaluation indexes, and retaining the subjective evaluation indexes. Additionally, we select some modern chairs as experimental samples to verify the reliability and validity of this subjective product evaluation system by means of questionnaires. The experimental results show that, in this subjective product evaluation system, the subjective evaluation of the product is positively correlated with the “favorite” level of the product in comprehensive evaluation, and negatively correlated with the “least favorite” level of the product in comprehensive evaluation, indicating that this subjective product evaluation system realizes a symmetry between subjective product evaluation and comprehensive product evaluation. Therefore, it can be concluded that this subjective product evaluation system based on KE and AHP proposed in this study has reliability and validity, and can be used for product evaluation to judge the popularity of products and enhance the competitiveness of products.

scholarly journals VS2 as saturable absorber for Q-switched pulse generation

Nanophotonics ◽  
2020 ◽  
Vol 9 (8) ◽  
pp. 2569-2576 ◽  
Author(s):  
Lu Li ◽  
Lihui Pang ◽  
Qiyi Zhao ◽  
Yao Wang ◽  
Wenjun Liu
Keyword(s):  
Saturable Absorber ◽  
Nonlinear Optical ◽  
Modulation Depth ◽  
Signal To Noise Ratio ◽  
Transition Metal Dichalcogenides ◽  
Laser Cavity ◽  
Pulse Generation ◽  
High Signal ◽  
Power Pulse ◽  
Metal Dichalcogenides

AbstractTransition metal dichalcogenides have been widely utilized as nonlinear optical materials for laser pulse generation applications. Herein, we study the nonlinear optical properties of a VS2-based optical device and its application as a new saturable absorber (SA) for high-power pulse generation. Few-layer VS2 nanosheets are deposited on the tapered region of a microfiber to form an SA device, which shows a modulation depth of 40.52%. After incorporating the microfiber-VS2 SA into an Er-doped fiber laser cavity, passively Q-switched pulse trains could be obtained with repetition rates varying from 95 to 233 kHz. Under the pump power of 890 mW, the largest output power and shortest pulse duration are measured to be 43 mW and 854 ns, respectively. The high signal-to-noise ratio of 60 dB confirms the excellent stability of the Q-switching state. To the best of our knolowdge, this is the first illustration of using VS2 as an SA. Our experimental results demonstrate that VS2 nanomaterials have a large potential for nonlinear optics applications.

scholarly journals Development of Real-Time Time Gated Digital (TGD) OFDR Method and Its Performance Verification

Sensors ◽  
2021 ◽  
Vol 21 (14) ◽  
pp. 4865
Author(s):  
Kinzo Kishida ◽  
Artur Guzik ◽  
Ken’ichi Nishiguchi ◽  
Che-Hsien Li ◽  
Daiji Azuma ◽  
...  
Keyword(s):  
Real Time ◽  
Optical Fibers ◽  
High Speed ◽  
Oil And Gas ◽  
Scattered Light ◽  
Oil And Gas Industry ◽  
High Signal ◽  
Chirp Pulse ◽  
Sound Waves ◽  
Industry Applications

Distributed acoustic sensing (DAS) in optical fibers detect dynamic strains or sound waves by measuring the phase or amplitude changes of the scattered light. This contrasts with other distributed (and more conventional) methods, such as distributed temperature (DTS) or strain (DSS), which measure quasi-static physical quantities, such as intensity spectrum of the scattered light. DAS is attracting considerable attention as it complements the conventional distributed measurements. To implement DAS in commercial applications, it is necessary to ensure a sufficiently high signal-noise ratio (SNR) for scattered light detection, suppress its deterioration along the sensing fiber, achieve lower noise floor for weak signals and, moreover, perform high-speed processing within milliseconds (or sometimes even less). In this paper, we present a new, real-time DAS, realized by using the time gated digital-optical frequency domain reflectometry (TGD-OFDR) method, in which the chirp pulse is divided into overlapping bands and assembled after digital decoding. The developed prototype NBX-S4000 generates a chirp signal with a pulse duration of 2 μs and uses a frequency sweep of 100 MHz at a repeating frequency of up to 5 kHz. It allows one to detect sound waves at an 80 km fiber distance range with spatial resolution better than a theoretically calculated value of 2.8 m in real time. The developed prototype was tested in the field in various applications, from earthquake detection and submarine cable sensing to oil and gas industry applications. All obtained results confirmed effectiveness of the method and performance, surpassing, in conventional SM fiber, other commercially available interrogators.

scholarly journals Detection and localization of multiple small damages in beam

2021 ◽  
Vol 13 (1) ◽  
pp. 168781402098732
Author(s):  
Ayisha Nayyar ◽  
Ummul Baneen ◽  
Syed Abbas Zilqurnain Naqvi ◽  
Muhammad Ahsan
Keyword(s):  
Frequency Response ◽  
Natural Frequencies ◽  
Signal To Noise Ratio ◽  
Moving Average ◽  
A Priori ◽  
Damage Index ◽  
High Signal ◽  
Frequency Range ◽  
Spatial Locality ◽  
System Frequency

Localizing small damages often requires sensors be mounted in the proximity of damage to obtain high Signal-to-Noise Ratio in system frequency response to input excitation. The proximity requirement limits the applicability of existing schemes for low-severity damage detection as an estimate of damage location may not be known  a priori. In this work it is shown that spatial locality is not a fundamental impediment; multiple small damages can still be detected with high accuracy provided that the frequency range beyond the first five natural frequencies is utilized in the Frequency response functions (FRF) curvature method. The proposed method presented in this paper applies sensitivity analysis to systematically unearth frequency ranges capable of elevating damage index peak at correct damage locations. It is a baseline-free method that employs a smoothing polynomial to emulate reference curvatures for the undamaged structure. Numerical simulation of steel-beam shows that small multiple damages of severity as low as 5% can be reliably detected by including frequency range covering 5–10th natural frequencies. The efficacy of the scheme is also experimentally validated for the same beam. It is also found that a simple noise filtration scheme such as a Gaussian moving average filter can adequately remove false peaks from the damage index profile.

scholarly journals Understanding PI-QUAL for prostate MRI quality: a practical primer for radiologists

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Francesco Giganti ◽  
Alex Kirkham ◽  
Veeru Kasivisvanathan ◽  
Marianthi-Vasiliki Papoutsaki ◽  
Shonit Punwani ◽  
...  
Keyword(s):  
Diffusion Weighted Imaging ◽  
Signal To Noise Ratio ◽  
High Signal ◽  
Diagnostic Quality ◽  
Prostate Mri ◽  
Prostate Imaging ◽  
Dynamic Contrast Enhanced ◽  
Diffusion Weighted ◽  
Contrast Enhanced

AbstractProstate magnetic resonance imaging (MRI) of high diagnostic quality is a key determinant for either detection or exclusion of prostate cancer. Adequate high spatial resolution on T2-weighted imaging, good diffusion-weighted imaging and dynamic contrast-enhanced sequences of high signal-to-noise ratio are the prerequisite for a high-quality MRI study of the prostate. The Prostate Imaging Quality (PI-QUAL) score was created to assess the diagnostic quality of a scan against a set of objective criteria as per Prostate Imaging-Reporting and Data System recommendations, together with criteria obtained from the image. The PI-QUAL score is a 1-to-5 scale where a score of 1 indicates that all MR sequences (T2-weighted imaging, diffusion-weighted imaging and dynamic contrast-enhanced sequences) are below the minimum standard of diagnostic quality, a score of 3 means that the scan is of sufficient diagnostic quality, and a score of 5 implies that all three sequences are of optimal diagnostic quality. The purpose of this educational review is to provide a practical guide to assess the quality of prostate MRI using PI-QUAL and to familiarise the radiologist and all those involved in prostate MRI with this scoring system. A variety of images are also presented to demonstrate the difference between suboptimal and good prostate MR scans.

Narrow-frequency sharp-angular filters using all-dielectric cascaded meta-gratings

Nanophotonics ◽  
2020 ◽  
Vol 9 (10) ◽  
pp. 3443-3450 ◽  
Author(s):  
Wei-Nan Liu ◽  
Rui Chen ◽  
Wei-Yi Shi ◽  
Ke-Bo Zeng ◽  
Fu-Li Zhao ◽  
...  
Keyword(s):  
Thin Film ◽  
Signal To Noise Ratio ◽  
Incident Angle ◽  
Design Strategy ◽  
Transmission Peak ◽  
High Signal ◽  
Waveguide Array ◽  
Signal To Noise ◽  
Center Wavelength ◽  
Noise Ratio

AbstractSelective transmission or filtering always responds to either frequency or incident angle, so as hardly to maximize signal-to-noise ratio in communication, detection and sensing. Here, we propose compact meta-filters of narrow-frequency sharp-angular transmission peak along with broad omnidirectional reflection sidebands, in all-dielectric cascaded subwavelength meta-gratings. The inherent collective resonance of waveguide-array modes and thin film approximation of meta-grating are employed as the design strategy. A unity transmission peak, locating at the incident angle of 44.4° and the center wavelength of 1550 nm, is demonstrated in a silicon meta-filter consisting of two-layer silicon rectangular meta-grating. These findings provide possibilities in cascaded meta-gratings spectroscopic design and alternative utilities for high signal-to-noise ratio applications in focus-free spatial filtering and anti-noise systems in telecommunications.

Sign in / Sign up

Export Citation Format

Share Document