The Research on Metal Milling about down Milling and Inverse Milling for Application

2015 ◽  
Vol 733 ◽  
pp. 526-530
Author(s):  
Shi Min Wang ◽  
Dong Quan Zhao ◽  
Rong Qi Deng
Keyword(s):  
Production Efficiency ◽  
Work Piece ◽  
Mechanical Processing ◽  
Milling Machine ◽  
Forward Movement ◽  
Milling Cutter ◽  
Advantages And Disadvantages ◽  
Future Production ◽  
Cutting Direction

Milling is a rule in milling machine using the rotation of the milling cutter movement, the movement of the work piece forward movement to machining of cutting method. In processing, the direction of rotation of the milling cutter is generally the same, but the cutting direction of tool is changing. In milling of common two phenomena: down milling and inverse milling. In order to improve the surface quality of machining and reduce tool wear, and thus improve the production efficiency and economic benefit, this paper expounded from different angles and compared the advantages and disadvantages of two types of milling, In order to the future production mechanical processing industry provides the theoretical basis and technical support.

scholarly journals Effect of cutting conditions on quality of milled surface of medium-density fibreboards

BioResources ◽  
2019 ◽  
Vol 15 (1) ◽  
pp. 746-766
Author(s):  
Richard Kminiak ◽  
Mikuláš Siklienka ◽  
Rastislav Igaz ◽  
Ľuboš Krišťák ◽  
Tomáš Gergeľ ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Surface Quality ◽  
Feed Rate ◽  
Medium Density ◽  
Milling Cutter ◽  
Operation Speed ◽  
Constant Operation ◽  
Milled Surface ◽  
Cutting Direction

The quality of milled surface medium-density fibreboards (MDF) and the effect of the wrong milling direction during the process of automatic milling in real conditions in practice (production machine, production tool, and material) are presented in the paper. Moreover, the effect of the double vs. single bladed milling cutter on the final surface quality with the simultaneous changes in individual parameters of feed rate, thickness of the removed layer, and cutting direction was investigated. The MDF was separated using the strategy “one per pass“ with required cutting direction (climb or conventional) and the required thick strips cutting off (4 mm to 16+ mm) at a constant operation speed of the milling cutter (n = 20000 min−1) and a changing feed rate from vf = 1 m/min−1 to vf = 5 m/min−1. The use of a multi-bladed milling cutter resulted in the higher quality of the milled surface in all cases (change in feed rate, thickness of removed layer, and cutting direction). The effect of the wrong milling direction during automatic milling was observed only for a single-bladed milling cutter used. An increase in surface roughness (Ra) occurred; therefore, using the double-bladed milling cutter, which was not associated with an increase in surface roughness, is recommended.

Measurement and Comparison of Force Effort During Friction Stir Welding in a Parallel Kinematic 5-Axis Milling Machine

2012 ◽  
Author(s):  
Arun Prasath Manogaran ◽  
Guillaume Racineux ◽  
Jean-Yves Hascoet
Keyword(s):  
Friction Stir Welding ◽  
Low Cost ◽  
Milling Machine ◽  
Friction Stir ◽  
Advantages And Disadvantages ◽  
Measuring Devices ◽  
Wide Range ◽  
Dynamic Measuring ◽  
And Control

Friction stir welding (FSW) is so quite promising that leads it to one of the preferred joining process for a wide range of applications especially for Aluminum. FSW machines are very expensive. The objective is to develop a simple and low cost technique to measure and control the force during FSW in a milling machine. Measurement of forces during welding is a difficult task. Many dynamic measuring devices such as dynamometers are available but each have their own advantages and disadvantages. A new approach to measure force while performing weld is discussed. First, incorporation of FSW in PKM 5-axes milling machine is done. The head of the machine is modified to support higher force levels that are generated during FSW. With the help of the NC-Controller, the force values are retrieved from the axes of the machine while performing weld through actuators. Forces were also measured from load cell and compared to estimate the quality of measurement.

Measuring the Size of Vibrations on a Mill Using the Vibration Analysis

2017 ◽  
Vol 756 ◽  
pp. 119-126
Author(s):  
Štefánia Olejárová ◽  
Tibor Krenický
Keyword(s):  
Experimental Research ◽  
Vibration Analysis ◽  
Maximum Rate ◽  
Rotation Speed ◽  
Poor Quality ◽  
Work Piece ◽  
Milling Machine ◽  
Optimum Depth

When processing materials using the milling technology, regenerative fluctuations of vibrations are the decisive factors, which limit productivity. In some case the size of the vibrations can cause shortened lifespan of the tool, decrease reliability and operational condition of the device, and subsequently case poor quality of the processed surface. Predicting the size of the vibrations between the milling machine and the work-piece is important as a lead for the users of the tool to select optimum depth of the cut and turning of the spindle, which leads to maximum rate of splinter removal. The extent of the research is focused especially on the process of monitoring, with the goal to analyze the size of the vibration at three places determined in advance - spindle head, work-piece and support, where rotation speed of the spindle change during the processing, as well as rate of splinter removal. By evaluating the results of experimental research, it is possible to determine adequate rotation speed of the spindle and depth of the cut, to achieve longest lifespan of the machine.

Mechanism Innovative Design for Manufacturing Internal Cylindrical Cavity Die

2011 ◽  
Vol 308-310 ◽  
pp. 2211-2214
Author(s):  
Jie Wu ◽  
Zhen Qi Zong
Keyword(s):  
Cylindrical Cavity ◽  
Production Efficiency ◽  
Design For Manufacturing ◽  
Work Piece ◽  
Milling Machine ◽  
Horizontal Movement ◽  
Shape Accuracy ◽  
Innovative Design ◽  
Manufacturing Method ◽  
Low Efficiency

When the internal cylindrical cavity die is processed on traditional milling machine, such defects as interference between the disc milling cutter and die, low efficiency as well as poor shape accuracy often exists. This paper describes a new manufacturing method, in which the compound motion theory is applied by means of combining rotary motion of cutters with the horizontal movement of the work-piece. As result the internal cylindrical cavity die can be manufactured very accurately, not only improving production efficiency but also ensuring the accuracy of the cylindrical cavity.

Can trust become a factor of economic growth? Dynamic changes in the level of trust of Russian youth

2020 ◽  
pp. 92-107 ◽  
Author(s):  
A. I. Bakhtigaraeva ◽  
A. A. Stavinskaya
Keyword(s):  
Institutional Environment ◽  
Negative Effects ◽  
Dynamic Changes ◽  
Generalized Trust ◽  
Level Of Education ◽  
Advantages And Disadvantages ◽  
The Future ◽  
Analysis Of Dynamics

The article considers the role of trust in the economy, the mechanisms of its accumulation and the possibility of using it as one of the growth factors in the future. The advantages and disadvantages of measuring the level of generalized trust using two alternative questions — about trusting people in general and trusting strangers — are analyzed. The results of the analysis of dynamics of the level of generalized trust among Russian youth, obtained within the study of the Institute for National Projects in 10 regions of Russia, are presented. It is shown that there are no significant changes in trust in people in general during the study at university. At the same time, the level of trust in strangers falls, which can negatively affect the level of trust in the country as a whole, and as a result have negative effects on the development of the economy in the future. Possible causes of the observed trends and the role of universities are discussed. Also the question about the connection between the level of education and generalized trust in countries with different quality of the institutional environment is raised.

Data Integrity Techniques in Cloud Computing: An Analysis

2017 ◽  
Vol 7 (8) ◽  
pp. 121 ◽  
Author(s):  
Neha Thakur ◽  
Aman Kumar Sharma
Keyword(s):  
Cloud Computing ◽  
Cloud Storage ◽  
Data Integrity ◽  
Advantages And Disadvantages ◽  
Security Models ◽  
Cloud Storage Service ◽  
Storage Service ◽  
Cloud Users ◽  
It Enterprises

Cloud computing has been envisioned as the definite and concerning solution to the rising storage costs of IT Enterprises. There are many cloud computing initiatives from IT giants such as Google, Amazon, Microsoft, IBM. Integrity monitoring is essential in cloud storage for the same reasons that data integrity is critical for any data centre. Data integrity is defined as the accuracy and consistency of stored data, in absence of any alteration to the data between two updates of a file or record.  In order to ensure the integrity and availability of data in Cloud and enforce the quality of cloud storage service, efficient methods that enable on-demand data correctness verification on behalf of cloud users have to be designed. To overcome data integrity problem, many techniques are proposed under different systems and security models. This paper will focus on some of the integrity proving techniques in detail along with their advantages and disadvantages.

Problems of Distance Education

2018 ◽  
Vol 7 (1) ◽  
pp. 14-23 ◽  
Author(s):  
Rostislav Fojtík
Keyword(s):  
Distance Education ◽  
Distance Learning ◽  
Computer Science ◽  
Full Time ◽  
Advantages And Disadvantages ◽  
E Learning ◽  
Educational Requirements

Abstract Distance learning and e-learning have significantly developed in recent years. It is also due to changing educational requirements, especially for adults. The article aims to show the advantages and disadvantages of distance learning. Examples of the 20-year use of the distance learning form of computer science describe the difficulties associated with the implementation and implementation of this form of teaching. The results of students in the full-time and distance form of teaching in the bachelor’s study of computer science are compared. Long-term findings show that distant students have significantly lower scores in the first years of study than full-time bachelor students. In the following years of study, the differences diminish, and students’ results are comparable. The article describes the possibilities of improving the quality of distance learning.

February 9 — Dentist Day in Russia

2020 ◽  
pp. 78-81
Author(s):  
Oksana Rybachok
Keyword(s):  
Early Childhood ◽  
Oral Cavity ◽  
Salivary Glands ◽  
Spiritual Development ◽  
The Body ◽  
Mechanical Processing ◽  
Normal Functioning ◽  
Digestion Process ◽  
Quality Of Food

«Man is what he eats,» these words belong to the great Pythagoras. He meant by these words the connection of the origin of consumed food with the spiritual development of man. In fact, a lot depends on the nature of nutrition, the quality of food and, of course, on the degree of its perception by the body. Digestion process begins not in the stomach, but directly in the oral cavity as a result of mechanical processing of products with teeth and under the influence of the secretion of the salivary glands. That is why healthy teeth are the key to the normal functioning of the whole organism — people should start taking care of their teeth from the early childhood and dentists, who are far from being beloved by everybody and are often carelessly evaded, are called upon to help keep the teeth healthy.

scholarly journals Deep Learning-Based Growth Prediction System: A Use Case of China Agriculture

Agronomy ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1551
Author(s):  
Tamoor Khan ◽  
Jiangtao Qiu ◽  
Hafiz Husnain Raza Sherazi ◽  
Mubashir Ali ◽  
Sukumar Letchmunan ◽  
...  
Keyword(s):  
Deep Learning ◽  
Crop Production ◽  
Agricultural Development ◽  
Production Efficiency ◽  
Fruit Production ◽  
National Bureau ◽  
System A ◽  
Future Production ◽  
Learning Techniques ◽  
Agricultural Yields

Agricultural advancements have significantly impacted people’s lives and their surroundings in recent years. The insufficient knowledge of the whole agricultural production system and conventional ways of irrigation have limited agricultural yields in the past. The remote sensing innovations recently implemented in agriculture have dramatically revolutionized production efficiency by offering unparalleled opportunities for convenient, versatile, and quick collection of land images to collect critical details on the crop’s conditions. These innovations have enabled automated data collection, simulation, and interpretation based on crop analytics facilitated by deep learning techniques. This paper aims to reveal the transformative patterns of old Chinese agrarian development and fruit production by focusing on the major crop production (from 1980 to 2050) taking into account various forms of data from fruit production (e.g., apples, bananas, citrus fruits, pears, and grapes). In this study, we used production data for different fruits grown in China to predict the future production of these fruits. The study employs deep neural networks to project future fruit production based on the statistics issued by China’s National Bureau of Statistics on the total fruit growth output for this period. The proposed method exhibits encouraging results with an accuracy of 95.56% calculating by accuracy formula based on fruit production variation. Authors further provide recommendations on the AGR-DL (agricultural deep learning) method being helpful for developing countries. The results suggest that the agricultural development in China is acceptable but demands more improvement and government needs to prioritize expanding the fruit production by establishing new strategies for cultivators to boost their performance.

scholarly journals Systematic Analysis of Literature on the Marketing of Healthcare Systems. Challenges for Russian and Romanian Healthcare Systems

Healthcare ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 656
Author(s):  
Vladimir Bulatnikov ◽  
Cristinel Petrişor Constantin
Keyword(s):  
Quality Of Healthcare ◽  
Healthcare Systems ◽  
Business Environment ◽  
Competitive Advantages ◽  
Systematic Analysis ◽  
Scientific Databases ◽  
Advantages And Disadvantages ◽  
Funds Allocation ◽  
New Perspective

This paper aims at finding the most dominant ideas about the marketing of healthcare systems highlighted in the mainstream literature, with a focus on Russia and Romania. To reach this goal, a systematic analysis of literature was conducted and various competitive advantages and disadvantages of the medical models that require special attention from the governments are considered. In this respect we examined 106 papers published during 2006 to 2020 found on four scientific databases. They were selected using inclusion and exclusion criteria according to PRISMA methodology. The main findings of the research consist of the opportunity to use marketing tools in order to improve the quality of healthcare systems in the named countries. Thus, using market orientation, the managers of healthcare systems could stimulate the innovation, the efficiency of funds allocation and the quality of medical services. The results will lead to a better quality of population life and to an increasing of life expectancy. As this paper reviews some articles from Russian literature, it can add a new perspective to the topic. These outcomes have implications for government, business environment, and academia, which should cooperate in order to develop the healthcare system using marketing strategies.

Sign in / Sign up

Export Citation Format

Share Document