Textural and Fractal Characteristics of KOH-Activated Microporous Carbon Materials and their Carbon Dioxide Storage Performances

2015 ◽  
Vol 1118 ◽  
pp. 255-264
Author(s):  
Yan Yan Feng ◽  
Wen Yang ◽  
Tao Lin ◽  
Wei Chu
Keyword(s):  
Fractal Dimension ◽  
Adsorption Capacity ◽  
Activated Carbons ◽  
Fractal Dimensions ◽  
Textural Properties ◽  
Freundlich Isotherm ◽  
Koh Activation ◽  
Pristine Sample ◽  
Adsorption Data ◽  
Fractal Characteristics

Commercial activated carbon has been activated with KOH in order to investigate the effect of textural characteristics on CO2storage behaviors. The KOH activation has significantly enhanced the textural properties of the adsorbents, as compared to the pristine sample. CO2adsorption tests on the activated carbons were measured at 298 K and pressures up to 5.0 MPa, and the Langmuir-Freundlich isotherm was used to fit the adsorption data. The CO2uptake for the resulting adsorbents was significantly higher than that of the starting adsorbent in the studied pressure range. To better understand the structures and their influences on the CO2uptake, fractal analysis was conducted for the adsorbents on the basis of Frenkel-Halsey-Hill (FHH) equation. Fractal dimensions (D1and D2) that calculated from N2adsorption data were discussed. The results showed that the two fractal dimensions have different influences on CO2adsorption capacity. There was a negative linear correlation between CO2maximum uptake and D1, while CO2adsorption capacity increased with fractal dimension D2increasing. Therefore, it was concluded that appropriate pore structure fractal dimension with narrower PSDs within the microporous range had higher CO2adsorption capacity for the adsorbents.

scholarly journals Development of Back-calculation Model for Aggregate Gradation Determination Using Fractal Theory

2018 ◽  
Vol 159 ◽  
pp. 01006
Author(s):  
Bagus Hario Setiadji ◽  
Supriyono ◽  
Djoko Purwanto
Keyword(s):  
Fractal Dimension ◽  
Fractal Theory ◽  
Asphalt Mixture ◽  
Fractal Dimensions ◽  
Calculation Model ◽  
Careful Consideration ◽  
Upper And Lower Bounds ◽  
Aggregate Gradation ◽  
Fractal Characteristic ◽  
Fractal Characteristics

Several studies have shown that fractal theory can be used to analyze the morphology of aggregate materials in designing the gradation. However, the question arises whether a fractal dimension can actually represent a single aggregate gradation. This study, which is a part of a grand research to determine aggregate gradation based on known asphalt mixture specifications, is performed to clarify the aforementioned question. To do so, two steps of methodology were proposed in this study, that is, step 1 is to determine the fractal characteristics using 3 aggregate gradations (i.e. gradations near upper and lower bounds, and middle gradation); and step 2 is to back-calculate aggregate gradation based on fractal characteristics obtained using 2 scenarios, one-and multi-fractal dimension scenarios. The results of this study indicate that the multi-fractal dimension scenario provides a better prediction of aggregate gradation due to the ability of this scenario to better represent the shape of the original aggregate gradation. However, careful consideration must be observed when using more than two fractal dimensions in predicting aggregate gradation as it will increase the difficulty in developing the fractal characteristic equations.

Application of Fractal Theory in Aggregate Gradation Research

2012 ◽  
Vol 204-208 ◽  
pp. 1923-1928
Author(s):  
Bo Tan ◽  
Rui Hua Yang ◽  
Yan Ting Lai
Keyword(s):  
Fractal Dimension ◽  
Fractal Theory ◽  
Asphalt Mixture ◽  
Fractal Dimensions ◽  
Aggregate Gradation ◽  
Structure Characteristics ◽  
Aggregate Distribution ◽  
Dimension Formula ◽  
Mass Fractal ◽  
Fractal Characteristics

The paper presents the fractal dimension formula of distribution of asphalt mixture aggregate diameter by the deducing mass fractal characteristics function. Taking AC-20 and SMA-20 as examples, selected 6 groups of representative grading curves within the grading envelope proposed by the present specification, and calculated their fractal dimensions. The asphalt mixture gradation has fractal dimension D (D∈(1,3)), and the fractal of continuous gradation is single while the fractal of gap-gradation shows multi-fractal with 4.75 as the dividing point. Fractal dimension of aggregate gradation of asphalt mixture reflect the structure characteristics of aggregate distribution, that is, finer is aggregate, bigger is the fractal dimension.

scholarly journals Pinecone-Derived Activated Carbons as an Effective Medium for Hydrogen Storage

Energies ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2237
Author(s):  
Sara Stelitano ◽  
Giuseppe Conte ◽  
Alfonso Policicchio ◽  
Alfredo Aloise ◽  
Giovanni Desiderio ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Hydrogen Storage ◽  
Adsorption Capacity ◽  
Surface Area ◽  
Hydrogen Adsorption ◽  
Activated Carbons ◽  
Chemical Activation ◽  
Textural Properties ◽  
Biomass Waste ◽  
Wavelength Dispersive Spectrometry

Pinecones, a common biomass waste, has an interesting composition in terms of cellulose and lignine content that makes them excellent precursors in various activated carbon production processes. The synthesized, nanostructured, activated carbon materials show textural properties, a high specific surface area, and a large volume of micropores, which are all features that make them suitable for various applications ranging from the purification of water to energy storage. Amongst them, a very interesting application is hydrogen storage. For this purpose, activated carbon from pinecones were prepared using chemical activation with different KOH/precursor ratios, and their hydrogen adsorption capacity was evaluated at liquid nitrogen temperatures (77 K) at pressures of up to 80 bar using a Sievert’s type volumetric apparatus. Regarding the comprehensive characterization of the samples’ textural properties, the measurement of the surface area was carried out using the Brunauer–Emmett–Teller method, the chemical composition was investigated using wavelength-dispersive spectrometry, and the topography and long-range order was estimated using scanning electron microscopy and X-ray diffraction, respectively. The hydrogen adsorption properties of the activated carbon samples were measured and then fitted using the Langmuir/ Töth isotherm model to estimate the adsorption capacity at higher pressures. The results showed that chemical activation induced the formation of an optimal pore size distribution for hydrogen adsorption centered at about 0.5 nm and the proportion of micropore volume was higher than 50%, which resulted in an adsorption capacity of 5.5 wt% at 77 K and 80 bar; this was an increase of as much as 150% relative to the one predicted by the Chahine rule.

scholarly journals The Impacts of Matrix Compositions on Nanopore Structure and Fractal Characteristics of Lacustrine Shales from the Changling Fault Depression, Songliao Basin, China

Minerals ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 127 ◽  
Author(s):  
Zhuo Li ◽  
Zhikai Liang ◽  
Zhenxue Jiang ◽  
Fenglin Gao ◽  
Yinghan Zhang ◽  
...  
Keyword(s):  
Fractal Dimension ◽  
Pore Structure ◽  
Fractal Dimensions ◽  
Organic Medium ◽  
Songliao Basin ◽  
Sem Images ◽  
Fractal Characteristics ◽  
Inorganic Mineral ◽  
Nanopore Structure ◽  
High Fractal Dimension

The Lower Cretaceous Shahezi shales are the targets for lacustrine shale gas exploration in Changling Fault Depression (CFD), Southern Songliao Basin. In this study, the Shahezi shales were investigated to further understand the impacts of rock compositions, including organic matters and minerals on pore structure and fractal characteristics. An integrated experiment procedure, including total organic carbon (TOC) content, X-ray diffraction (XRD), field emission-scanning electron microscope (FE-SEM), low pressure nitrogen physisorption (LPNP), and mercury intrusion capillary pressure (MICP), was conducted. Seven lithofacies can be identified according to on a mineralogy-based classification scheme for shales. Inorganic mineral hosted pores are the most abundant pore type, while relatively few organic matter (OM) pores are observed in FE-SEM images of the Shahezi shales. Multimodal pore size distribution characteristics were shown in pore width ranges of 0.5–0.9 nm, 3–6 nm, and 10–40 nm. The primary controlling factors for pore structure in Shahezi shales are clay minerals rather than OM. Organic-medium mixed shale (OMMS) has the highest total pore volumes (0.0353 mL/g), followed by organic-rich mixed shale (ORMS) (0.02369 mL/g), while the organic-poor shale (OPS) has the lowest pore volumes of 0.0122 mL/g. Fractal dimensions D1 and D2 (at relative pressures of 0–0.5 and 0.5–1 of LPNP isotherms) were obtained using the Frenkel–Halsey–Hill (FHH) method, with D1 ranging from 2.0336 to 2.5957, and D2 between 2.5779 and 2.8821. Fractal dimensions are associated with specific lithofacies, because each lithofacies has a distinctive composition. Organic-medium argillaceous shale (OMAS), rich in clay, have comparatively high fractal dimension D1. In addition, organic-medium argillaceous shale (ORAS), rich in TOC, have comparatively high fractal dimension D2. OPS shale contains more siliceous and less TOC, with the lowest D1 and D2. Factor analysis indicates that clay contents is the most significant factor controlling the fractal dimensions of the lacustrine Shahezi shale.

scholarly journals Fractal Characteristics of Chip Morphology and Tool Wear in High-Speed Turning of Iron-Based Super Alloy

Materials ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 1020
Author(s):  
Xu Zhang ◽  
Guangming Zheng ◽  
Xiang Cheng ◽  
Rufeng Xu ◽  
Guoyong Zhao ◽  
...  
Keyword(s):  
Fractal Dimension ◽  
Tool Wear ◽  
High Speed ◽  
Cutting Speed ◽  
Fractal Dimensions ◽  
Chip Morphology ◽  
Color Changes ◽  
Fractal Characteristics ◽  
Iron Based ◽  
Super Alloy

Considering that iron-based super alloy is a kind of difficult-to-cut material, it is easy to produce work hardening and serious tool wear during machining. Therefore, this work aims to explore the chip change characteristics and tool wear mechanism during the processing of iron-based super alloy, calculate the fractal dimensions of chip morphology and tool wear morphology, and use fractals to analyze their change trend. Meanwhile, a new cutting tool with a super ZX coating is used for a high-speed dry turning experiment. The results indicate that the morphology of the chip is saw-tooth, and its color changes gradually, due to the oxidation reaction. The main wear mechanisms of the tool involve abrasive wear, adhesive wear, oxidation wear, coating spalling, microcracking and chipping. The fractal dimension of the tool wear surface and chip is increased with the improvement of cutting speed. This work investigates the fractal characteristics of chip morphology and tool wear morphology. The fractal dimension changes regularly with the change of tool wear, which plays an important role in predicting this tool wear. It is also provides some guidance for the efficient processing of an iron-based super alloy.

Adsorption of chromium (VI) from aqueous solutions on activated carbon

1994 ◽  
Vol 30 (9) ◽  
pp. 191-197 ◽  
Author(s):  
R. Leyva Ramos ◽  
A. Juarez Martinez ◽  
R. M. Guerrero Coronado
Keyword(s):  
Activated Carbon ◽  
Adsorption Isotherm ◽  
Adsorption Capacity ◽  
Ph Effect ◽  
Freundlich Isotherm ◽  
Maximum Adsorption Capacity ◽  
Experimental Adsorption ◽  
Ph Values ◽  
Chromium Vi ◽  
Adsorption Data

The adsorption isotherm of chromium (VI) on activated carbon was obtained in a batch adsorber. The experimental adsorption data were fitted reasonably well to the Freundlich isotherm. The effect of pH on the adsorption isotherm was investigated at pH values of 4, 6, 7, 8, 10 and 12. It was found that at pH < 6, Cr(VI) was adsorbed and reduced to Cr(III) by the catalytic action of the carbon and that at pH ≥ 12, Cr(VI) was not adsorbed on activated carbon. Maximum adsorption capacity was observed at pH 6 and the adsorption capacity was diminished about 17 times by increasing the pH from 6 to 10. The pH effect was attributed to the different complexes that Cr(VI) can form in aqueous solution. The adsorption isotherm was also affected by the temperature since the adsorption capacity was increased by raising the temperature from 25 to 40°C. It was concluded that Cr(VI) was adsorbed significantly on activated carbon at pH 6 and that the adsorption capacity was greatly dependent upon pH.

ADSORPTION OF ACID ORANGE 7 BY CETYLPYRIDINIUM BROMIDE MODIFIED SUGARCANE BAGASSE

2016 ◽  
Vol 78 (1-2) ◽  
Author(s):  
Nik Ahmad Nizam Nik Malek ◽  
Nurain Mat Sihat ◽  
Mahmud A. S. Khalifa ◽  
Auni Afiqah Kamaru ◽  
Nor Suriani Sani
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Sugarcane Bagasse ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Acid Orange 7 ◽  
Cetylpyridinium Bromide ◽  
Batch Mode ◽  
Acid Orange ◽  
Adsorption Data

In the present study, the adsorption of acid orange 7 (AO7) dye from aqueous solution by sugarcane bagasse (SB) and cetylpyridinium bromide (CPBr) modified sugarcane bagasse (SBC) was examined. SBC was prepared by reacting SB with different concentrations (0.1, 1.0 and 4.0 mM) of cationic surfactant, CPBr. The SB and SBC were characterized using Fourier transform infrared (FTIR) spectroscopy. The adsorption experiments were carried out in a batch mode. The effect of initial AO7 concentrations (5-1000 mg/L), initial CPBr concentrations and pH of AO7 solution (2-9) on the adsorption capacity of SB and SBC were investigated. The experimental adsorption data were analyzed using Langmuir and Freundlich isotherm models. The adsorption of AO7 onto SB and SBC followed Freundlich and Langmuir isotherm models, respectively. The maximum uptake of AO7 was obtained by SBC4.0 (SB treated with 4.0 mMCPBr) with the adsorption capacity of 144.928 mg/g. The highest AO7 removal was found to be at pH 2 and 7 for SB and SBC, respectively. As a conclusion, sugarcane bagasse modified with CPBr can become an alternative adsorbent for the removal of anionic compounds in aqueous solution.

scholarly journals Characterization and comparison of walnut shells-based activated carbons and their adsorptive properties

2020 ◽  
Vol 38 (9-10) ◽  
pp. 450-463
Author(s):  
Xiya Li ◽  
Jieqiong Qiu ◽  
Yiqi Hu ◽  
Xiaoyuan Ren ◽  
Lu He ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Activated Carbons ◽  
Low Cost ◽  
Total Pore Volume ◽  
Textural Properties ◽  
Hydrothermal Carbonization ◽  
Bet Surface Area ◽  
Activation Process ◽  
Walnut Shells ◽  
Adsorption Desorption

The production of low-cost biologically activated carbons (BACs) is urgent need of environmental protection and ecological sustainability. Hence, walnut shells were treated by traditional pyrolysis, direct KOH impregnation and combined activation composed of hydrothermal carbonization and two-step H3PO4- and pyrolysis-activation process to obtain porous carbon with high adsorption capacity. It was found that the best adsorption capacity for iodine and organic dye methylene blue (MB) can be obtained using the KOH impregnation at impregnation ratio of 1:1 or combined activation comprising of 2 h H3PO4 activation and 1 h pyrolysis activation at 1000°C. The produced KOH, H3PO4/pyrolysis activated BACs at the optimum conditions are superior to that of commercial ACs, 9.4 and 1.3 times for MB removal, 4 and 4.5 times for iodine number respectively. Characterization results demonstrated their porous structure with very good textural properties such as high BET surface area (1689.1 m2/g, 1545.3 m2/g) and high total pore volume (0.94 cm3/g, 0.96 cm3/g). The N2 adsorption-desorption isotherm of H3PO4/pyrolysis activated hydrochar suggested the co-existence of micro and meso-pores. Moreover, they are more effective for the removal of Fe(III) and Cr(VI) from aqueous solution than the commercial AC, suggesting a promising application in the field of water treatment.

Effect of Fractal Dimension of Powder Activated Carbon on SO2 Adsorption

2014 ◽  
Vol 955-959 ◽  
pp. 2169-2172 ◽  
Author(s):  
Bing Li ◽  
Jian Ming Xue ◽  
Yue Yang Xu ◽  
Hong Liang Wang ◽  
Chun Yuan Ma ◽  
...  
Keyword(s):  
Fractal Dimension ◽  
Activated Carbon ◽  
Adsorption Capacity ◽  
Activated Carbons ◽  
Fixed Bed ◽  
Fixed Bed Reactor ◽  
Removal Capacity ◽  
Powder Activated Carbon

Five kinds of powder activatedcarbons were studied to investigate the removal of SO2 from flue gasin a fixed bed reactor. The fractal dimension of activated carbon was determined by N2 adsorption isothermat 77Kand SO2 adsorptioncapacity was correlated with thefractal dimension. The results show thatthe activated carbons prepared from different precursors by differentactivation methods have different fractal dimension. Big differences in SO2 adsorption capacity are found between fivekinds of activated carbons. SO2 adsorption capacity increases with the fractaldimension increasing. The results indicate that the fractal dimension could be used as a indicator of SO2removal capacity on powder activated carbon.

scholarly journals Bioadsorption of lead(II) over the pulp of Acrocomia aculeata

2021 ◽  
Vol 46 (4) ◽  
pp. 38-46
Author(s):  
Alexandra Novak ◽  
F�tima Yubero ◽  
Diana Diez-P�rez-N��ez ◽  
Fernando Luis Fertonani ◽  
Brenda Gisselle Da Silva Britez ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Thermal Stability ◽  
Adsorption Capacity ◽  
Freundlich Isotherm ◽  
Column Experiments ◽  
Maximum Adsorption Capacity ◽  
Batch Experiments ◽  
Adsorption Data ◽  
Acrocomia Aculeata ◽  
Scanning Electron

The adsorption of lead in aqueous solution onto Acrocomia aculeata pulp was examined. The pulp was characterized in the presence and absence of lead using Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TG-DTA), and scanning electron microscopy (SEM). Sulfur and oxygen bonds were responsible for adsorbing lead onto the pulp surface. The TG-DTA profile proved that adding sodium azide increases the pulp�s thermal stability until 200 �C. Adsorption data in batch and column systems were analyzed to understand the pulp adsorption compared to other biomaterials. In the batch experiments, the removal efficiency reached a maximum of 91.9% when a solution of 50 ppm of lead was placed in contact with the pulp for 30 min and fit Freundlich isotherm behavior. In the column experiments, the theoretical maximum adsorption capacity was found to be 11.97 mg g�1; more column data is needed to compare column results to other studies. Further studies to improve the pulp adsorption capacity are needed for it to be a competitive biomaterial for water treatment.

Sign in / Sign up

Export Citation Format

Share Document