Bearing Capacity of Concrete Filled Square Steel Tube Short Columns with Inner CFRP Circular Tube under Eccentric Compression

2011 ◽  
Vol 243-249 ◽  
pp. 1272-1278
Author(s):  
Tian Hua Li ◽  
Jun Hai Zhao ◽  
Xue Ying Wei ◽  
Wei Kong ◽  
Xiao Ming Dong
Keyword(s):  
Bearing Capacity ◽  
Circular Tube ◽  
Steel Tube ◽  
Reduction Factor ◽  
Eccentricity Ratio ◽  
Strength Reduction Factor ◽  
The Core ◽  
Short Columns ◽  
Square Steel Tube ◽  
Core Concrete

Based on the unified strength theory, the bearing capacity of the concrete filled square steel tube short columns with inner CFRP circular tube under eccentric compression was analyzed. The restriction effect of the inner CFRP circular tube upon the core concrete, strength reduction factor for eccentricity ratio and the equivalent reduction factor, which considered the ratio of thickness to side effect, were taken into account in the theoretical analysis. The axial bearing capacity formula of the square steel tube short columns filled with inner CFRP circular tube was deduced. By introducing the strength reduction factor for eccentricity ratio, the eccentric bearing capacity formula on the basis of the axial bearing capacity formula was obtained. Parametric studies were carried out to evaluate the effects of intermediate principal stress, different CFRP deployment ratios, eccentricity ratios and the tension-compression ratio on the eccentric bearing capacity of the column. The formula was verified by the comparison of the theoretical results with the experimental data. The results show that inner CFRP circular tube can effectively restrain the core concrete.

Experimental Research on the Confinement Effect for the Composite Concrete-Filled Square Steel Tubular Short Columns

2010 ◽  
Vol 163-167 ◽  
pp. 2118-2123
Author(s):  
Bin Li ◽  
Chun Yan Gao
Keyword(s):  
Bearing Capacity ◽  
Concrete Strength ◽  
Steel Tube ◽  
Compression Tests ◽  
Steel Ratio ◽  
The Core ◽  
Short Columns ◽  
Core Concrete ◽  
Inclined Cracks ◽  
Section Form

Through the axial compression tests of two ordinary concrete-filled square steel tubular(CFSST) short columns and six composite CFSST short columns, the influence laws of section types, confinement coefficient, steel ratio and concrete strength on the mechanical behavior of the CFSST short columns were studied. The results show that in CFSST columns, the change of steel tube’s section form can improve effectively the cooperative work ability between the steel tube and core concrete, enhance the restraint effect of the steel tube on the core concrete, delay or inhibit the development of inclined cracks in the core concrete, increase the ductility and improve significantly the ultimate bearing capacity when the steel ratio or confinement coefficient is close to each other. With the increment of the confinement coefficient and steel ratio, the bearing capacity and ductility improve.

Research on Concrete-Filled Rectangular Steel Tube Stiffeners and Axial Compression Bearing Capacity

2014 ◽  
Vol 1065-1069 ◽  
pp. 1092-1096 ◽  
Author(s):  
Gao Cheng ◽  
Yong Jian Liu ◽  
Lei Jiang
Keyword(s):  
Bearing Capacity ◽  
Mechanical Performance ◽  
Compressive Load ◽  
Steel Tube ◽  
Simple Construction ◽  
The Core ◽  
Steel Bar ◽  
Stiffening Ribs ◽  
Reinforcement Measures ◽  
Core Concrete

Concrete-filled rectangular steel tube four sides restraint effect on the core concrete was weaker than the corner, which made the effect not significant. The paper studied a new kind of stiffening rib –PBL stiffener to strengthen restraint effect of concrete-filled rectangular steel tube , and evaluated its advantages compared with other stiffening ribs. 9 PBL stiffened concrete-filled rectangular steel tube columns under axial compressive load were tested. It also collected the test with other stiffened rids, such as straight ribs, binding bars, knee brace, steel reinforcement cage, steel bar stiffeners, saw tooth shaped stiffeners, stitching straight stiffeners and no rib concrete filled rectangular steel tube to compare. It evaluated increasing coefficient of bearing capacity by stiffening ribs. The results showed that: the PBL stiffeners and binding bar of concrete-filled rectangular steel tube bearing capacity was greater than other reinforcement measures by more than 20%; PBL stiffener could be a new prominent type of stiffener because of its excellent mechanical performance and simple construction.

Study on the Axial Ultimate Bearing Capacity of Concrete-Filled Square Steel Tubular Stub Columns

2013 ◽  
Vol 690-693 ◽  
pp. 742-746
Author(s):  
Peng Wu ◽  
Jian Feng Xu ◽  
Jun Hai Zhao ◽  
Qian Zhu ◽  
Su Wang
Keyword(s):  
Experimental Data ◽  
Bearing Capacity ◽  
Steel Tube ◽  
Ultimate Bearing Capacity ◽  
Strength Theory ◽  
Constraint Effect ◽  
Unified Strength Theory ◽  
Square Steel Tube ◽  
Core Concrete ◽  
Stub Columns

Based on unified strength theory, the mechanical behavior of core-concrete of concrete-filled square steel tubular stub columns was analyzed. Through controlling the constraint effect between square steel tube and core-concrete by width-thickness ratio, the ultimate bearing capacity formula for concrete-filled square steel tubular stub columns under axial compression was proposed, and the influencing factors of which was also discussed. The rationality of proposed formula was proved from the comparison of the analytical results obtained in this paper and experimental data.

scholarly journals A Study on Axial Compression Performance of Concrete-Filled Steel-Tubular Shear Wall with a Multi-Cavity T-Shaped Cross-Section

Energies ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4831
Author(s):  
Hao Sun ◽  
Qingyuan Xu ◽  
Pengfei Yan ◽  
Jianguang Yin ◽  
Ping Lou
Keyword(s):  
Finite Element ◽  
Bearing Capacity ◽  
Axial Compression ◽  
Limit State ◽  
Shear Wall ◽  
Steel Tube ◽  
Element Analysis ◽  
Compression Performance ◽  
The Core ◽  
Core Concrete

In order to study the axial compression performance of the T-shaped multi-cavity concrete-filled steel tube shear wall, first, three specimens were designed to perform the axial compression test. Then three-dimensional finite element analysis by the ABAQUS software was used to obtain the axial bearing capacity of the shear wall with different parameters. According to the results of the finite element model, the computational diagram in the limit state was obtained. The diagram was simplified into the core concrete in the non-enhanced area that was not constrained by the steel tube and the core concrete in the enhanced area that was uniformly constrained by the steel tube. Finally, a new practical equation for calculating the axial bearing capacity of a multi-cavity concrete-filled steel tubular shear wall was deduced and proposed based on the theory of ultimate equilibrium. The calculation results of the proposed equation were in good agreement with the finite element results, and the proposed equation can be used in practical engineering design.

scholarly journals Bearing Capacity Studies on Square Steel Tube Confined Steel Reinforced Concrete Column under Eccentric Load

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Tongfeng Zhao
Keyword(s):  
Reinforced Concrete ◽  
Bearing Capacity ◽  
Slenderness Ratio ◽  
Steel Tube ◽  
Concrete Column ◽  
Eccentricity Ratio ◽  
Reinforced Concrete Column ◽  
Eccentric Load ◽  
Steel Reinforced Concrete ◽  
Square Steel Tube

In the present study, an experimental research was conducted on square steel tube confined steel reinforced concrete column under eccentric load. The major parameters of the specimens included slenderness ratio, eccentricity ratio, and structural steel reinforced ratio. According to the tested results, the eccentricity ratio, from 0 to 0.55, significantly affects the structural bearing capacity. The slenderness ratio, from 3 to 8, and steel reinforced ratio, from 0.3 to 0.41, slightly affect the capacity. Furthermore, a numerical analysis program was developed, and the calculated results are well consistent with the experimental results. Also, the theoretical formula for eccentrically loaded columns was proposed based on numerical results.

Finite Element Simulation on Behavior of the High-Strength Concrete Filled High-Strength Square Steel Tube Middle-Long Columns under Axial Compressive Load

2014 ◽  
Vol 578-579 ◽  
pp. 340-345
Author(s):  
Guo Chang Li ◽  
Bo Wen Zhu ◽  
Yu Liu
Keyword(s):  
Bearing Capacity ◽  
High Strength Concrete ◽  
Slenderness Ratio ◽  
High Strength ◽  
Steel Tube ◽  
New Combination ◽  
Length Variation ◽  
Compression Process ◽  
Strength Concrete ◽  
Square Steel Tube

In this paper, using ABAQUS, 16 high-strength concrete filled high-strength square steel tube middle-long columns’ axial compression process were simulated. The load-deflection relationships were obtained and the new combination in improving the bearing capacity and plastic deformation has a great advantage. Realization of length variation slenderness ratio by changing the length of column, this paper also study the influence of slenderness ratio, the main parameters of the high-strength concrete filled high-strength square steel tube middle-long column. It is found that both bearing capacity and the plastic capacity are associated with slenderness ratio.

scholarly journals Finite element analysis of mechanical behavior of concrete-filled square steel tube short columns with inner I-shaped CFRP profiles subjected to bi-axial eccentric load

2018 ◽  
Author(s):  
Guochang Li ◽  
Zhichang Zhan ◽  
Zhijian Yang ◽  
Yu Yang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Compressive Strength ◽  
Steel Tube ◽  
Concrete Compressive Strength ◽  
Eccentric Load ◽  
Element Analysis ◽  
Composite Columns ◽  
Short Columns ◽  
Square Steel Tube

The concrete-filed square steel tube with inner I-shaped CFRP profiles short columns under bi-axial eccentric load were investigated by the finite element analysis software ABAQUS. The working mechanism of the composite columns which is under bi-axial eccentric load are investigated by using the stress distribution diagram of steel tube concrete and the I-shaped CFRP profiles. In this paper, the main parameters; eccentric ratio, steel ratio, steel yield strength, concrete compressive strength and CFRP distribution rate of the specimens were investigated to know the mechanical behavior of them. The interaction between the steel tube and the concrete interface at different characteristic points of the composite columns were analyzed. The results showed that the ultimate bearing capacity of the concrete-filed square steel tube with inner I-shaped CFRP profiles short columns under bi-axial eccentric load decrease with the increase of eccentric ratio, the ultimate bearing capacity of the composite columns increase with the increase of steel ratio, steel yield strength, concrete compressive strength and CFRP distribution rate. The contact pressure between the steel tube and the concrete decreased from the corner zone to the flat zone, and the contact pressure decreased from the mid-height cross section to other sections.

Experimental Study on Mechanical Properties of Larch Glulam Columns under Axial Compression

2016 ◽  
Vol 847 ◽  
pp. 38-45
Author(s):  
Xian Yan Zhou ◽  
Dan Zeng ◽  
Zhi Feng Wang
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Bearing Capacity ◽  
Axial Strain ◽  
Slenderness Ratio ◽  
Axial Loading ◽  
Ultimate Bearing Capacity ◽  
Reduction Factor ◽  
Peak Strain ◽  
Short Columns

At present, the relevant researches of Glulam columns in China are mainly restricted to short columns. In order to study the mechanical properties of long columns under axial loading, an experimental study on five different slenderness ratios of Larch Glulam columns was carried out. With slenderness ratio changing, the variations of experimental data such as axial strain, lateral deflection at mid-height, ultimate bearing capacity, and peak strain were comparatively analyzed. The failure pattern and failure mechanism of long columns were discussed. The results indicate that the ultimate bearing capacity of Larch Glulam columns gradually decreases as the slenderness radio increases and the failure mode is gradually converted from strength failure to instability failure. The ultimate load reduction factor is obtained by regression analysis based on the experiment results of Larch Glulam short columns. The basis for design and application of Larch Glulam columns are provided.

scholarly journals Calculation of Axial Compression Capacity for Square Columns Strengthened with HPFL and BSP

2016 ◽  
Vol 2016 ◽  
pp. 1-11
Author(s):  
Hua Huang ◽  
Kailin Xi ◽  
Yu Zhang ◽  
Jinghui Shi ◽  
Boquan Liu
Keyword(s):  
Bearing Capacity ◽  
Axial Compression ◽  
High Performance ◽  
Reduction Factor ◽  
Steel Plates ◽  
Strength Reduction Factor ◽  
Compression Performance ◽  
Load Carrying ◽  
Calculation Results ◽  
Primary Damage

The load carrying capacity and failure mechanism of 8 square columns strengthened with high-performance ferrocement laminate (HPFL) and bonded steel plates (BSP) were analyzed on the basis of experiments on the axial compression performance of these columns. Results show that the reinforcing layer worked together with the original columns as a whole, and the load-bearing capacity significantly increased. When failure of the strengthened column occurred, the mortar and concrete were crushed and bulged outward in the middle of the columns, the angle bars and longitudinal steel bars buckled, and some stirrups were pulled out. The chamfering of angle bar momentously affected the primary damage of steel strand. The values of the strength reduction factor and pressure effective utilization coefficient of the mortar were suggested. Based on the experiments and existing tests of 35 columns strengthened with HPFL, equations for the axial compression bearing capacity were proposed and all calculation results agreed well with testing results. Therefore, the calculation method could be used in the capacity design of axial compression strengthened columns.

Sign in / Sign up

Export Citation Format

Share Document