Advances in Process Technology of Sepiolite Mineral Fibrous Materials

2012 ◽  
Vol 499 ◽  
pp. 193-197
Author(s):  
Ming Ming Cheng ◽  
Fei Wang ◽  
Lin Jing Ma ◽  
Chao Fan
Keyword(s):  
Size Effect ◽  
Surface Effect ◽  
Low Cost ◽  
High Surface ◽  
Research Area ◽  
High Specific Surface Area ◽  
Fibrous Materials ◽  
Process Technology ◽  
Processing Technologies ◽  
Group Mineral

Inorganic nanofibers are characterized by small size effect, quantum size effect and surface effect. Inorganic nanofibers and polymer form polymer and inorganic nanocomposites, which has become an active research area and showed good development and application prospects. As a typical type of inorganic fibrous minerals, sepiolite group mineral fibrous materials can not maximize nano-effect due to small particle size, high specific surface area, high surface energy and easy reunion of inorganic nanofibers. Based on the above reasons, this paper systematically summarizes the processing technologies of sepiolite group mineral fibrous materials, and proposes the suitable processing technology of batch production of sepiolite group mineral fibrous materials at low cost based on the analysis.

Advances in Water Treatment Application of Sepiolite Mineral Materials

2013 ◽  
Vol 710 ◽  
pp. 217-220 ◽  
Author(s):  
Fei Wang ◽  
Lei Feng ◽  
Meng Ran Tang ◽  
Ji Yuan Li ◽  
Qing Guo Tang
Keyword(s):  
Water Treatment ◽  
Size Effect ◽  
Large Scale ◽  
Surface Effect ◽  
Development Trend ◽  
High Energy ◽  
Research Area ◽  
Group Mineral ◽  
Active Research ◽  
Treatment Application

Synthetic nanomaterials have the disadvantages of large-scale investment, high energy consumption, complex production process and heavy environmental load. Mineral nanomaterials such as sepiolite group mineral nanomaterials are characterized by small size effect, quantum size effect and surface effect. Water treatment application of sepiolite group mineral nanomaterials has become an active research area and showed good development and application prospects. Based on the above reasons, this paper systematically summarizes the water treatment application of sepiolite group mineral nanomaterials, and development trend related to water treatment application of sepiolite group mineral nanomaterials were also proposed.

Preparation of N-Doped Nanoporous Carbon from Crude Biomass and its Electrochemical Activity

NANO ◽  
2016 ◽  
Vol 11 (03) ◽  
pp. 1650028 ◽  
Author(s):  
Zezhong Xu ◽  
Jingyu Si
Keyword(s):  
Surface Area ◽  
Low Cost ◽  
High Surface ◽  
High Surface Area ◽  
Lithium Ion ◽  
Nanoporous Carbon ◽  
High Specific Surface Area ◽  
Electrochemical Sensing ◽  
Potential Candidate ◽  
Surface Areas

H2O2 detection plays an important role in electrochemical sensing since H2O2 often acts as an intermediate product or regulator in various reactions. Nanoporous carbon (NPC) can be a potential candidate in electrochemical sensing because of its high specific surface area, various pore sizes and structures. In this work, we reported the preparation of N-doped NPC derived from the highly available, accessible and recyclable plant Typha orientalis. The products have high surface area (highest surface areas of 1439.0 m2 g[Formula: see text] and a number of nanopores. Highest content of nitrogen atom in the product is 3.66 at.%). Typical product exhibits high electrocatalytic activity for reduction of hydrogen peroxide. The product may have further use for glucose biosensing. We developed a low-cost, simple and readily scalable approach to prepare the excellent carbon electrocatalyst directly from crude biomass. In addition, because of high surface area and doping of nitrogen element, the product may find broad applications in the fields of supercapacitors, lithium-ion batteries, gas uptake and so on.

scholarly journals Towards Sustainable Concrete Composites through Waste Valorisation of Plastic Food Trays as Low-Cost Fibrous Materials

2021 ◽  
Vol 13 (4) ◽  
pp. 2073 ◽  
Author(s):  
Hossein Mohammadhosseini ◽  
Rayed Alyousef ◽  
Mahmood Md. Tahir
Keyword(s):  
Compressive Strength ◽  
Low Cost ◽  
Impact Resistance ◽  
Food Tray ◽  
World Population ◽  
Fibrous Materials ◽  
Palm Oil Fuel Ash ◽  
Waste Plastic ◽  
Compressive Strength Of Concrete ◽  
The Impact

Recycling of waste plastics is an essential phase towards cleaner production and circular economy. Plastics in different forms, which are non-biodegradable polymers, have become an indispensable ingredient of human life. The rapid growth of the world population has led to increased demand for commodity plastics such as food packaging. Therefore, to avert environment pollution with plastic wastes, sufficient management to recycle this waste is vital. In this study, experimental investigations and statistical analysis were conducted to assess the feasibility of polypropylene type of waste plastic food tray (WPFT) as fibrous materials on the mechanical and impact resistance of concrete composites. The WPFT fibres with a length of 20 mm were used at dosages of 0–1% in two groups of concrete with 100% ordinary Portland cement (OPC) and 30% palm oil fuel ash (POFA) as partial cement replacement. The results revealed that WPFT fibres had an adverse effect on the workability and compressive strength of concrete mixes. Despite a slight reduction in compressive strength of concrete mixtures, tensile and flexural strengths significantly enhanced up to 25% with the addition of WPFT fibres. The impact resistance and energy absorption values of concrete specimens reinforced with 1% WPFT fibres were found to be about 7.5 times higher than those of plain concrete mix. The utilisation of waste plastic food trays in the production of concrete makes it low-cost and aids in decreasing waste discarding harms. The development of new construction materials using WPFT is significant to the environment and construction industry.

scholarly journals Synthesis of catalysts with fine platinum particles supported by high-surface-area activated carbons and optimization of their catalytic activities for polymer electrolyte fuel cells

RSC Advances ◽  
2021 ◽  
Vol 11 (33) ◽  
pp. 20601-20611
Author(s):  
Md. Mijanur Rahman ◽  
Kenta Inaba ◽  
Garavdorj Batnyagt ◽  
Masato Saikawa ◽  
Yoshiki Kato ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Polymer Electrolyte ◽  
High Performance ◽  
Activated Carbons ◽  
Low Cost ◽  
High Surface ◽  
High Surface Area ◽  
Polymer Electrolyte Fuel Cells ◽  
Supported Platinum ◽  
Platinum Particles

Herein, we demonstrated that carbon-supported platinum (Pt/C) is a low-cost and high-performance electrocatalyst for polymer electrolyte fuel cells (PEFCs).

scholarly journals Fate of β-Carotene within Loaded Delivery Systems in Food: State of Knowledge

Antioxidants ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 426
Author(s):  
Vaibhav Kumar Maurya ◽  
Amita Shakya ◽  
Manjeet Aggarwal ◽  
Kodiveri Muthukaliannan Gothandam ◽  
Torsten Bohn ◽  
...  
Keyword(s):  
High Surface ◽  
High Surface Area ◽  
Research Area ◽  
Delivery Systems ◽  
Preparation Methods ◽  
Bioactive Agents ◽  
Unique Composition ◽  
Targeted Release ◽  
Β Carotene ◽  
Regulatory Challenges

Nanotechnology has opened new opportunities for delivering bioactive agents. Their physiochemical characteristics, i.e., small size, high surface area, unique composition, biocompatibility and biodegradability, make these nanomaterials an attractive tool for β-carotene delivery. Delivering β-carotene through nanoparticles does not only improve its bioavailability/bioaccumulation in target tissues, but also lessens its sensitivity against environmental factors during processing. Regardless of these benefits, nanocarriers have some limitations, such as variations in sensory quality, modification of the food matrix, increasing costs, as well as limited consumer acceptance and regulatory challenges. This research area has rapidly evolved, with a plethora of innovative nanoengineered materials now being in use, including micelles, nano/microemulsions, liposomes, niosomes, solidlipid nanoparticles, nanostructured lipids and nanostructured carriers. These nanodelivery systems make conventional delivery systems appear archaic and promise better solubilization, protection during processing, improved shelf-life, higher bioavailability as well as controlled and targeted release. This review provides information on the state of knowledge on β-carotene nanodelivery systems adopted for developing functional foods, depicting their classifications, compositions, preparation methods, challenges, release and absorption of β-carotene in the gastrointestinal tract (GIT) and possible risks and future prospects.

scholarly journals Effects of Annealing Temperature on the Oxygen Evolution Reaction Activity of Copper–Cobalt Oxide Nanosheets

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 657
Author(s):  
Geul Han Kim ◽  
Yoo Sei Park ◽  
Juchan Yang ◽  
Myeong Je Jang ◽  
Jaehoon Jeong ◽  
...  
Keyword(s):  
High Activity ◽  
Cobalt Oxide ◽  
Oxygen Evolution ◽  
Oxygen Evolution Reaction ◽  
Low Cost ◽  
High Surface ◽  
High Surface Area ◽  
Cobalt Hydroxide ◽  
Ni Foam ◽  
Electron Conduction

Developing high performance, highly stable, and low-cost electrodes for the oxygen evolution reaction (OER) is challenging in water electrolysis technology. However, Ir- and Ru-based OER catalysts with high OER efficiency are difficult to commercialize as precious metal-based catalysts. Therefore, the study of OER catalysts, which are replaced by non-precious metals and have high activity and stability, are necessary. In this study, a copper–cobalt oxide nanosheet (CCO) electrode was synthesized by the electrodeposition of copper–cobalt hydroxide (CCOH) on Ni foam followed by annealing. The CCOH was annealed at various temperatures, and the structure changed to that of CCO at temperatures above 250 °C. In addition, it was observed that the nanosheets agglomerated when annealed at 300 °C. The CCO electrode annealed at 250 °C had a high surface area and efficient electron conduction pathways as a result of the direct growth on the Ni foam. Thus, the prepared CCO electrode exhibited enhanced OER activity (1.6 V at 261 mA/cm2) compared to those of CCOH (1.6 V at 144 mA/cm2), Co3O4 (1.6 V at 39 mA/cm2), and commercial IrO2 (1.6 V at 14 mA/cm2) electrodes. The optimized catalyst also showed high activity and stability under high pH conditions, demonstrating its potential as a low cost, highly efficient OER electrode material.

Morphology dependent adsorption of methylene blue on trititanate nanoplates and nanotubes prepared by the hydrothermal treatment of TiO2

2016 ◽  
Vol 75 (2) ◽  
pp. 350-357
Author(s):  
Graham Dawson ◽  
Wei Chen ◽  
Luhua Lu ◽  
Kai Dai
Keyword(s):  
Methylene Blue ◽  
Adsorption Capacity ◽  
Surface Area ◽  
Pore Volume ◽  
Hydrothermal Reaction ◽  
Low Cost ◽  
High Surface ◽  
High Surface Area ◽  
High Capacity ◽  
Adsorption Properties

The adsorption properties of two nanomorphologies of trititanate, nanotubes (TiNT) and plates (TiNP), prepared by the hydrothermal reaction of concentrated NaOH with different phases of TiO2, were examined. It was found that the capacity for both morphologies towards methylene blue (MB), an ideal pollutant, was extremely high, with the TiNP having a capacity of 130 mg/g, higher than the TiNT, whose capacity was 120 mg/g at 10 mg/L MB concentration. At capacity, the well-dispersed powders deposit on the floor of the reaction vessel. The two morphologies had very different structural and adsorption properties. TiNT with high surface area and pore volume exhibited exothermic monolayer adsorption of MB. TiNP with low surface area and pore volume yielded a higher adsorption capacity through endothermic multilayer adsorption governed by pore diffusion. TiNP exhibited a higher negative surface charge of −23 mV, compared to −12 mV for TiNT. The adsorption process appears to be an electrostatic interaction, with the cationic dye attracted more strongly to the nanoplates, resulting in a higher adsorption capacity and different adsorption modes. We believe this simple, low cost production of high capacity nanostructured adsorbent material has potential uses in wastewater treatment.

scholarly journals A Multidisciplinary Perspective of Ultra-Processed Foods and Associated Food Processing Technologies: A View of the Sustainable Road Ahead

Nutrients ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 3948
Author(s):  
Francesco Capozzi ◽  
Faidon Magkos ◽  
Fabio Fava ◽  
Gregorio Paolo Milani ◽  
Carlo Agostoni ◽  
...  
Keyword(s):  
Health Outcomes ◽  
Food Processing ◽  
Low Cost ◽  
Classification Systems ◽  
Processed Foods ◽  
Processing Technologies ◽  
Adverse Health Outcomes ◽  
Increased Risk ◽  
Multidisciplinary Perspective ◽  
By Products

Ultra-processed foods (UPFs) are negatively perceived by part of the scientific community, the public, and policymakers alike, to the extent they are sometimes referred to as not “real food”. Many observational surveys have linked consumption of UPFs to adverse health outcomes. This narrative synthesis and scientific reappraisal of available evidence aims to: (i) critically evaluate UPF-related scientific literature on diet and disease and identify possible research gaps or biases in the interpretation of data; (ii) emphasize the innovative potential of various processing technologies that can lead to modifications of the food matrix with beneficial health effects; (iii) highlight the possible links between processing, sustainability and circular economy through the valorisation of by-products; and (iv) delineate the conceptual parameters of new paradigms in food evaluation and classification systems. Although greater consumption of UPFs has been associated with obesity, unfavorable cardiometabolic risk factor profiles, and increased risk for non-communicable diseases, whether specific food processing techniques leading to ultra-processed formulations are responsible for the observed links between UPFs and various health outcomes remains elusive and far from being understood. Evolving technologies can be used in the context of sustainable valorisation of food processing by-products to create novel, low-cost UPFs with improved nutritional value and health potential. New paradigms of food evaluation and assessment should be funded and developed on several novel pillars—enginomics, signalling, and precision nutrition—taking advantage of available digital technologies and artificial intelligence. Research is needed to generate required scientific knowledge to either expand the current or create new food evaluation and classification systems, incorporating processing aspects that may have a significant impact on health and wellness, together with factors related to the personalization of foods and diets, while not neglecting recycling and sustainability aspects. The complexity and the predicted immense size of these tasks calls for open innovation mentality and a new mindset promoting multidisciplinary collaborations and partnerships between academia and industry.

scholarly journals A novel biosensor based on Blu-ray disc coating film for determination of total amino acid content in tea leaves

RSC Advances ◽  
2021 ◽  
Vol 11 (63) ◽  
pp. 39666-39671
Author(s):  
Lanling Chu ◽  
Yunzheng Wang ◽  
Yu Zhou ◽  
Xuejun Kang
Keyword(s):  
Low Cost ◽  
High Surface ◽  
Amino Acid Content ◽  
Substrate Material ◽  
Total Amino Acid ◽  
Coating Film ◽  
The Novel ◽  
Total Amino Acid Content ◽  
High Surface Activity

The novel biosensor substrate material based on a simple BD coating film displayed preferable merits with high surface activity, low cost, easy making, easy using, and extensive application prospect.

scholarly journals Flower-like boehmite nanopowders obtained at low temperature from Bayer liquor

2020 ◽  
Vol 14 (2) ◽  
pp. 168-172
Author(s):  
Marija Milanovic ◽  
Zoran Obrenovic ◽  
Ivan Stijepovic ◽  
Ljubica Nikolic
Keyword(s):  
Low Temperature ◽  
Specific Surface ◽  
Surface Area ◽  
Industrial Production ◽  
Single Phase ◽  
Low Cost ◽  
High Specific Surface Area ◽  
Nanocrystalline Powders ◽  
Transition Alumina ◽  
Bayer Liquor

Boehmite nanocrystalline powders were obtained by neutralization of Bayer liquor at 70?C with addition of glucose. Temperature of the neutralization induced formation of the flower-like morphology of the nanopowders. XRD and FTIR results confirmed that the single phase boehmite is formed without any other impurities. Calcination at 500?C led to the formation of transition -alumina with the retention of the flower-like morphology. Both as-synthesised and calcined powders possessed high specific surface area with mesopores between 3-6 nm in diameter. Relatively low temperature of neutralization as well as the use of low cost and ecologically friendly glucose as a surfactant are very promising for the possible application in the industrial production of alumina nanopowders.

Sign in / Sign up

Export Citation Format

Share Document