scholarly journals Low Profile Wideband Dual-Ring Slot Antenna for Biomedical Applications

2021 ◽  
Vol 19 ◽  
pp. 38-44
Author(s):  
Shilpee Patil ◽  
Vinod Kapse ◽  
Shruti Sharma ◽  
Anil Kumar Pandey
Keyword(s):  
High Frequency ◽  
Biomedical Applications ◽  
Return Loss ◽  
Impedance Matching ◽  
Slot Antenna ◽  
Great Flexibility ◽  
High Frequency Structure Simulator ◽  
Large Bandwidth ◽  
Low Profile ◽  
Dual Ring

In this study, a low-profile, co-planar waveguide (CPW) fed, wideband, and dual-ring slot antenna design for biomedical applications is proposed. The proposed antenna has a total area of 10 mm × 10 mm and a height of 0.4 mm, and is designed by using a thin and biocompatible FR4 epoxy (εr = 4.4) substrate to accomplish human body isolation and great flexibility obtained by implantation. This wideband antenna covers a large bandwidth of industrial scientific and medical (ISM) frequency band, including 902.8 MHz to 928 MHz, 1.395 GHz to 1.4 GHz, 1.427 GHz to 1.432 GHz, 2.4 GHz to 2.485 GHz, and above. The simulation results of return loss, voltage standing wave ratio (VSWR), impedance matching, gain, and radiation pattern of the proposed antenna are obtained through High Frequency Structure Simulator (HFSS) 14 software.

Optimum Patch Dimension Ratio of T-Shaped Microstrip Antenna

2013 ◽  
Vol 684 ◽  
pp. 303-306
Author(s):  
Eugene Rhee ◽  
Ji Hoon Lee
Keyword(s):  
High Frequency ◽  
Microstrip Antenna ◽  
Microstrip Line ◽  
Return Loss ◽  
Impedance Matching ◽  
Feeding Method ◽  
High Frequency Structure Simulator ◽  
Feeding Methods ◽  
Coaxial Probe ◽  
Dimension Ratio

There are various feeding methods of antenna like as coaxial probe, coupling, parasitic elements, and impedance matching. This paper adopted the microstrip line method as the feeding method of the antenna. The high frequency structure simulator is used to analyze the characteristics of the T-shaped microstrip antenna with various patch dimensions. In comparison with the basic microstrip antenna, this proposed T-shaped microstrip antenna with 40.38 % of patch dimensions has the optimum characteristics of resonant frequency, return loss, and radiation pattern at 2.0 GHz band.

scholarly journals Fully Integrated High Gain S-Band Triangular Slot Antenna for CubeSat Communications

Electronics ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 156
Author(s):  
Mohamed El Bakkali ◽  
Moulhime El Bekkali ◽  
Gurjot Singh Gaba ◽  
Josep M. Guerrero ◽  
Lavish Kansal ◽  
...  
Keyword(s):  
Radiation Pattern ◽  
Return Loss ◽  
Impedance Matching ◽  
Electronic Devices ◽  
Wide Band ◽  
High Gain ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Fully Integrated ◽  
Low Profile

Among other CubeSat subsystems, Antenna is one of the most important CubeSat components as its design determines all the telecommunication subsystems’ performances. This paper presents a coplanar wave-guide (CPW)-fed equilateral triangular slot antenna constructed and analyzed for CubeSat communications at S-band. The proposed antenna alone presents high gain and ultra-wide band while its radiation pattern is bidirectional at an unlicensed frequency of 2450 MHz. The objective is to use the CubeSat chassis as a reflector for reducing the back-lobe radiation and hence minimizing interferences with electronic devices inside the CubeSat. This leads to a high gain of 8.20 dBi and a unidirectional radiation pattern at an industrial, scientific and mdical (ISM) band operating frequency of 2450 MHz. In addition to that, the presented antenna is low-profile and exhibits high return loss, ultra-wide impedance bandwidth, and good impedance matching at 2450 MHz.

Comb Shaped Triple Band Microstrip Antenna for Wireless Communication

2021 ◽  
Vol 9 (4) ◽  
pp. 379-382
Keyword(s):  
Dielectric Constant ◽  
Wireless Communication ◽  
High Frequency ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Experimental Results ◽  
High Frequency Structure Simulator ◽  
Frequency Structure ◽  
Triple Band

A comb shaped microstrip antenna is designed by loading rectangular slots on the patch of the antenna. The antenna resonating at three different frequencies f1 = 5.35 GHz, f2 = 6.19 GHz and f3= 8.15 GHz. The designed antenna is simulated on High Frequency Structure Simulator software [HFSS] and the antenna is fabricated using substrate glass epoxy with dielectric constant 4.4 having dimension of 8x4x0.16 cms. The antenna shows good return loss, bandwidth and VSWR. Experimental results are observed using Vector Analyzer MS2037C/2.

Coplanar waveguide-fed ISM band implantable crossed-type triangular slot antenna for biomedical applications

2013 ◽  
Vol 6 (2) ◽  
pp. 167-172 ◽  
Author(s):  
Srinivasan Ashok Kumar ◽  
Thangavelu Shanmuganantham
Keyword(s):  
Biomedical Applications ◽  
Biomedical Application ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
High Gain ◽  
Slot Antenna ◽  
Center Frequency ◽  
Ism Band ◽  
High Data ◽  
Implantable Antenna

A novel coplanar waveguide fed Industrial, Scientific, and Medical (ISM) band implantable crossed-type triangular slot antenna is proposed for biomedical applications. The antenna operates at the center frequency of 2450 MHz, which is in ISM band, to support GHz wideband communication for high-data rate implantable biomedical application. The size of the antenna is 78 mm3 (10 mm × 12 mm × 0.65 mm). The simulated and measured bandwidths are 7.9 and 8.2% at the resonant frequency of 2.45 GHz. The specific absorption rate distribution induced by the implantable antenna inside a human body tissue model is evaluated. The communication between the implanted antenna and external device is also examined. The proposed antenna has substantial merits such as miniaturization, lower return loss, better impedance matching, and high gain over other implanted antennas.

A New Design of Ka-Band Circularly-Polarized Antenna

2014 ◽  
Vol 631-632 ◽  
pp. 383-386
Author(s):  
Jiao Jiao Fan ◽  
Jian Li ◽  
Dan Song ◽  
Li Wu ◽  
Shu Sheng Peng
Keyword(s):  
High Frequency ◽  
Circular Waveguide ◽  
Ka Band ◽  
Circularly Polarized ◽  
Simulation And Optimization ◽  
Total Height ◽  
High Frequency Structure Simulator ◽  
Frequency Structure ◽  
Low Profile ◽  
Linearly Polarized

A new ka-band circularly-polarized antenna is presented in this paper, in which a linearly-polarized wave is conversed into a circularly-polarized wave with a circular waveguide polarizer. After simulation and optimization with HFSS (High Frequency Structure Simulator), a compact circularly-polarized antenna is designed with a total height less than 25mm. More simple and easier structure is adopted to achieve a low-profile circularly-polarized antenna.

scholarly journals Metamaterial extended CSRR based monopole antenna for wideband applications

2017 ◽  
Vol 7 (1.1) ◽  
pp. 461 ◽  
Author(s):  
Pronami Bora ◽  
Mona Mudaliar ◽  
Yuvraj Baburao Dhanade ◽  
K Sreelakshm ◽  
Chayan Paul ◽  
...  
Keyword(s):  
Patch Antenna ◽  
High Frequency ◽  
Impedance Matching ◽  
Monopole Antenna ◽  
High Frequency Structure Simulator ◽  
Rectangular Patch ◽  
Measurement Results ◽  
Defected Ground Structures ◽  
Ground Structures ◽  
Ku Band

A metamaterial extended microstrip rectangular patch antenna with CSRR loading and defected ground structures(DGS) is proposed for wideband applications with band notching at the frequencies of KU band. The proposed antenna is designed by embedding it on Rogers RT/Duroid 5880 substrate with good impedance matching of 50 Ω at the feedline.The high frequency structure simulator (HFSS) is used to design and simulate the antennas parameters in the operating band. Measurement results confirm the antenna characteristics as predicted in the simulation with a slight shift in frequencies.

Quad Band Planar Inverted F Antenna for Smart Phone

2014 ◽  
Vol 573 ◽  
pp. 394-399
Author(s):  
R. Manikandan ◽  
P.K. Jawahar
Keyword(s):  
High Frequency ◽  
Smart Phone ◽  
Analysis And Design ◽  
High Frequency Structure Simulator ◽  
Low Profile ◽  
Resonance Frequencies ◽  
Theoretical Predictions ◽  
Communication Devices ◽  
Device Miniaturization ◽  
Good Agreement

In recent years, the demand for compact handheld communication devices has grown significantly. For device miniaturization antenna size is to be reduced. Micro strip and PIFA have been used for past few years. Since it has low profile geometry it can be embedded into devices. This project is to develop a Quad band small size Planar Inverted F Antenna (PIFA) for the operation in modern multi-band mobile transceiver system. Various techniques for analysis and design of such antenna investigated in this project. The design curve is used to design Quad band Planar inverted F Antenna to operate at the 900, 1800, 2100 and 3500 MHz bands. Since High Frequency Structure Simulator (HFSS) simulation result agrees well with the theoretical predictions, this project also designed through HFSS. An antenna designed at the four desired band and optimized to adjust the four resonance frequencies using HFSS simulation. The substrate FR4 (εr=4.4 & tanδ = 0.02) are in good agreement with the simulation result. Further bandwidth enhancements by making defects in the substrate at particular area were need of much reflection.

scholarly journals Design of Wideband Antenna Array for WiMax Application

2021 ◽  
Vol 9 (8) ◽  
pp. 958-962
Author(s):  
Rakesh N
Keyword(s):  
Antenna Array ◽  
Patch Antenna ◽  
High Frequency ◽  
Return Loss ◽  
Flow Solver ◽  
Wideband Antenna ◽  
Circular Patch ◽  
High Frequency Structure Simulator ◽  
Frequency Structure ◽  
Circular Patch Antenna

Abstract: The evolution of wireless communication system has led path for innovative antenna design specifically in wideband antenna for WiMax application. In this paper design and simulation of microstrip wideband circular patch antenna array operating between 2GHz to 4Ghz is presented. The circular patch antenna is designed to operate at 3GHz line feed and the ground is itched to achieve required wideband characteristics. The simulation is carried out in EM Flow solver, High Frequency Structure Simulator software. For a single patch antenna, the return loss, lesser than -10dB throughout the bandwidth. Later an antenna array is operating between 2GHz to 4GHz frequency is designed and simulated. The return loss is lesser than -12dBi throughout the band and a peak gain is 14.7dBi. Keywords: Microstrip Patch Antenna (MPA), High Frequency Structure Simulator (HFSS).

scholarly journals BROADBAND MICROSTRIP ANTENNA FOR 2G/3G/4G MOBILE BASE STATION APPLICATIONS

2019 ◽  
Vol 11 (2) ◽  
pp. 165-175 ◽  
Author(s):  
Wafaa Mohammed Hashim ◽  
Asst. prof. Dr. Adheed Hasan Sallomi
Keyword(s):  
Patch Antenna ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Impedance Matching ◽  
Base Station ◽  
Impedance Bandwidth ◽  
Large Bandwidth ◽  
Mobile Base Station ◽  
Cellular Mobile ◽  
Mobile Base

a staircase patch microstrip antenna with slots is proposed to cover the 2G/3G/4G cellular mobile base station bands, when the antenna is excited with a transmission line, creates several modes these modes are composite to obtain a large bandwidth. The proposed antenna operates in the band from 0.86 GHz to 4.78 GHz with an impedance bandwidth of 138%. The use of staircase patch antenna is to achieve more attractive performance such as wider bandwidth, better impedance matching and better radiation. Inserting different slots to the patch of the antenna to enhance the gain and return loss. The gain is obtained ranging from 2.18 dBi to 5.3 dBi. Good radiation efficiencies ranging from 70% to 97% is achieved.

scholarly journals A Square Patch with L and Inverted L shaped slotted AMC structure for Wi-Fi Applications

2020 ◽  
Vol 9 (1) ◽  
pp. 1722-1725
Keyword(s):  
Resonant Frequency ◽  
Patch Antenna ◽  
High Frequency ◽  
Return Loss ◽  
Band Width ◽  
Magnetic Conductor ◽  
Radiation Characteristics ◽  
Artificial Magnetic Conductor ◽  
High Frequency Structure Simulator ◽  
Phase Reflection

To improve the antenna characteristics in terms of bandwidth, gain and its radiation characteristics without providing any phase reflections, Artificial Magnetic Conductor (AMC) are used in antenna designing. This paper initially designed AMC structure for 2.4GHz frequency. The proposed AMC structure consists of three L shaped and inverted L shaped slots and provides zero degrees phase reflection at 2.4GHz resonant frequency. This proposed AMC structure is incorporated on conventional micro strip square patch antenna and results are simulated in High Frequency Structure Simulator (HFSS) software. The Proposed AMC incorporated patch antenna, return loss is improved from -16.16dB to -31.75dB, VSWR is from 1.42 to 1.05, the band width is increased from 16.5 MHz to 348.1 MHz This design resonates at a frequency of 2.4GHz and applicable to Wi-Fi applications.

Sign in / Sign up

Export Citation Format

Share Document