Cobalt Ion Removal from Aqueous Solutions by Coal Fly Ash

2013 ◽  
Vol 864-867 ◽  
pp. 1732-1740
Author(s):  
Xiao Xu ◽  
Qiang Yang ◽  
Chao Yang Wang
Keyword(s):  
Fly Ash ◽  
Aqueous Solutions ◽  
Removal Rate ◽  
Coal Fly Ash ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Cobalt Ions ◽  
Freundlich Isotherms ◽  
Ion Removal ◽  
Low Concentrations

Cobalt ions, which are commonly found in low concentrations in industrial wastewater, are toxic, biocumulative, and hard to degrade. Therefore, the removal of these heavy metal ions from wastewater is highly important. The removal of Co (II) from aqueous solutions using untreated and alkali-modified coal fly ash was studied. The results for untreated fly ash show that the pseudo-second-order kinetic equation better fits the observed adsorption progress. The Langmuir and Freundlich isotherms could describe the reaction efficiently, and the maximum adsorption capacity for Co (II) was 237 mg·g-1at 20°C. Pretreating the fly ash with an alkali solution decreases the adsorption capability, possibly by destroying the zeolite structure. When the ratio of the fly ash dose and Co (II) concentration is between 40 and 60, the removal rate of Co (II) at a concentration of 20 mg·L-1reaches 99.95%.

scholarly journals Mild Hydrothermal Synthesis of 11Å-TA from Alumina Extracted Coal Fly Ash and Its Application in Water Adsorption of Heavy Metal Ions (Cu(II) and Pb(II))

2022 ◽  
Vol 19 (2) ◽  
pp. 616
Author(s):  
Jingjie Yang ◽  
Hongjuan Sun ◽  
Tongjiang Peng ◽  
Li Zeng ◽  
Xin Zhou
Keyword(s):  
Fly Ash ◽  
Low Cost ◽  
Coal Fly Ash ◽  
Exothermic Reaction ◽  
High Alumina ◽  
Maximum Adsorption Capacity ◽  
Molten Salt Method ◽  
Order Kinetic ◽  
Isothermal Adsorption ◽  
Adsorption Characteristics

Non-biodegradable copper (Cu) and lead (Pb) contaminants in water are highly toxic and have series adverse effects. Therefore, it is very important to extract heavy metals from wastewater before it is discharged into the environment. Adsorption is a cost-effective alternative method for wastewater treatment. Choosing a low-cost adsorbent can help reduce the cost of adsorption. In this study, conversion of reside after extracting aluminum (REA) produced by sub-molten salt method transform high-alumina coal fly ash (CFA) into 11Å-tobermorite to adsorb Cu(II) and Pb(II) from aqueous solutions at room temperature. The synthesis of the adsorbent was confirmed using scanning electron microscope (SEM), X-ray diffractometer (XRD) and Brunauer–Emmett–Teller (BET) method surface analysis. To study the adsorption characteristics, factors such as initial Cu(II) and Pb(II) concentration, pH, contact time, adsorption characteristics and temperature were investigated in batch mode. The maximum adsorption capacity of Cu(II) and Pb(II) was 177.1 mg·g−1 and 176.2 mg·g−1, respectively. The Langmuir adsorption model was employed to better describe the isothermal adsorption behavior and confirm the monolayer adsorption phenomenon. The pseudo-second-order kinetic model was used to highlight Cu(II) and Pb(II) adsorption kinetics. Thermodynamic analysis indicated the removal Cu(II) and Pb(II) by TA-adsorbent was a nonspontaneous and exothermic reaction. The obtained results are of great significance to the conversion of industrial waste to low-cost adsorbent for Cu(II) and Pb(II) removal from water.

scholarly journals ADSORPTION OF REACTIVE BLACK 5 FROM AQUEOUS SOLUTION BY ZEOLITE FROM COAL FLY ASH: EQUILIBRIUM AND KINETIC STUDIES

2011 ◽  
Vol 08 (16) ◽  
pp. 17-24
Author(s):  
Patricia CUNICO ◽  
Denise Alves FUNGARO ◽  
Carina Pitwak MAGDALENA
Keyword(s):  
Fly Ash ◽  
Aqueous Solutions ◽  
Coal Fly Ash ◽  
Kinetic Studies ◽  
Reactive Black 5 ◽  
Order Kinetic ◽  
Zeolitic Material ◽  
Isotherm Adsorption ◽  
Coal Fly Ashes ◽  
Pseudo Second Order

Zeolite synthesized from coal fly ash (ZC) and coal fly ashes (CC) were used as adsorbents to remove Reactive Black 5 (RP5) dye from aqueous solutions. The equilibrium time was reached after 420 min. The kinetics studies indicated that the adsorption followed the pseudo-second order kinetic and that surface adsorption and intraparticle diffusion were involved in the adsorption mechanism. The isotherm adsorption data fit accordingly to the Langmuir model for both adsorbents. The maximum adsorption capacities were 0.685 mg g-1 for RP5/ZC system and 0.577 mg g-1 for RP5/CC system. The efficiencies of adsorption were found to be between 47.7-88.1% for ZC and 65.4-99.6% for CC. The results indicate that zeolitic material is suitable as adsorbent for adsorption of reactive azodye from aqueous solutions.

scholarly journals Acid red G dye removal from aqueous solutions by porous ceramsite produced from solid wastes: Batch and fixed-bed studies

2020 ◽  
Vol 9 (1) ◽  
pp. 770-782
Author(s):  
Tianpeng Li ◽  
Jing Fan ◽  
Tingting Sun
Keyword(s):  
Aqueous Solutions ◽  
Dye Removal ◽  
Coal Fly Ash ◽  
Exothermic Reaction ◽  
Fixed Bed ◽  
Column Experiment ◽  
Solid Wastes ◽  
Order Kinetic ◽  
Cost Effective Treatment ◽  
Acid Red G

AbstractA novel porous ceramsite was made of municipal sludge, coal fly ash, and river sediment by sintering process, and the performance of batch and fixed-bed column systems containing this material in the removal of acid red G (ARG) dye from aqueous solutions was assessed in this study. The results of orthogonal test showed that sintering temperature was the most important determinant in the preparation of porous ceramsite, and it possesses developed pore structure and high specific surface area. Batch experiment results indicated that the adsorption process of ARG dye toward porous ceramsite was a spontaneous exothermic reaction, which could be better described with Freundlich–Langmuir isotherm model (R2 > 0.992) and basically followed the pseudo-first-order kinetic equation (R2 > 0.993). Column experiment results showed that when the porous ceramsite was used as packing material, its adsorption capacity was roughly improved by 3.5 times compared with that in batch system, and the breakthrough behavior was simulated well with Yoon–Nelson model, with R2 > 0.954. This study suggested that the novelty man-made porous ceramsite obtained from solid wastes might be processed as a certain cost-effective treatment material fit for the dye removal in aqueous solutions.

scholarly journals Photoreduction of Cr(VI) Ions in Aqueous Solutions by UV/ Photocatalytic Processes

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Chih Ming Ma ◽  
Yung Shuen Shen ◽  
Po Hsiang Lin
Keyword(s):  
Aqueous Solutions ◽  
Reaction Rate ◽  
Removal Rate ◽  
Experimental Results ◽  
Order Kinetic ◽  
Solution Ph ◽  
Relationship Of ◽  
The Relationship ◽  
Photocatalytic Processes ◽  
Order Kinetic Equation

This study discussed the photoreduction of Cr(VI) ions in aqueous solutions by UV/TiO2photocatalytic processes under various operational factors. Experimental results showed that the removal rate of Cr(VI) increased with decreasing solution pH values and with increasing dosages of organic compounds, indicating that the recombination rate of electrons and h+can be retarded in the reaction systems by the addition of the scavenger, thus raising the reaction rate of Cr(VI). The relationship of the chemical reaction rate of Cr(VI), TiO2dosage, and changes of Cr(VI) concentration was expressed by the pseudo-first-order kinetic equation. Comparing the experimental results of two different doping metals in modified TiO2photoreduction systems, the removal rate of Cr(VI) by the Ag/TiO2process is larger, possibly because the electron transferring ability of Ag is superior to that of Cu. However, the photoreduction rates of Cr(VI) by modified UV/TiO2processes are worse than those by a nonmodified commercial UV/TiO2process.

scholarly journals Removal of Cu(II) from Aqueous Solutions Using Amine-Doped Polyacrylonitrile Fibers

2020 ◽  
Vol 10 (5) ◽  
pp. 1738
Author(s):  
Kay Thwe Aung ◽  
Seung-Hee Hong ◽  
Seong-Jik Park ◽  
Chang-Gu Lee
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Equilibrium Studies ◽  
Naoh Solution ◽  
Surface Modified ◽  
Pan Fibers

Polyacrylonitrile (PAN) fibers were prepared via electrospinning and were modified with diethylenetriamine (DETA) to fabricate surface-modified PAN fibers. The surface-modified PAN fibers were used to evaluate their adsorption capacity for the removal of Cu(II) from aqueous solutions. Batch adsorption experiments were performed to examine the effects of the modification process, initial concentration, initial pH, and adsorbent dose on the adsorption of Cu(II). Kinetic analysis revealed that the experimental data fitted the pseudo-second-order kinetic model better than the pseudo-first-order model. Adsorption equilibrium studies were conducted using the Freundlich and Langmuir isotherm models, and the findings indicated that the PAN fibers modified with 85% DETA presented the highest adsorption capacity for Cu(II) of all analyzed samples. Moreover, the results revealed that the Freundlich model was more appropriate than the Langmuir one for describing the adsorption of Cu(II) onto the modified fibers at various initial Cu(II) concentrations. The maximum adsorption capacity was determined to be 87.77 mg/g at pH 4, and the percent removal of Cu(II) increased as the amount of adsorbent increased. Furthermore, the surface-modified PAN fibers could be easily regenerated using NaOH solution. Therefore, surface-modified PAN fibers could be used as adsorbents for the removal of Cu(II) from aqueous solutions.

Adsorption of Pb(II) from Aqueous Solutions on Dithizone-Immobilized Coal Fly Ash

2020 ◽  
Vol 840 ◽  
pp. 57-63
Author(s):  
Dina Fitriana ◽  
Mudasir Mudasir ◽  
Dwi Siswanta
Keyword(s):  
Fly Ash ◽  
Adsorption Isotherm ◽  
Contact Time ◽  
Coal Fly Ash ◽  
Order Kinetic ◽  
Adsorbent Dosage ◽  
Activated Coal ◽  
Concentration Of Ions ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Adsorption of Pb(II) ions onto selective adsorbent of dithizone-immobilized coal fly ash (DCFA) from Holcim, Cilacap, Indonesia has been investigated in batch experiments. Prepared coal fly ash (CFA) modified by immobilization of dithizone previously were characterized by FT-IR and XRD. Several parameters influencing the adsorption of Pb(II) ions such as effect of pH, adsorbent dosage, contact time and initial concentration of ions on the efficiency of the adsorption were studied. The optimum condition of Pb(II) adsorption was found at pH 5, adsorbent dosage 0.1 g, contact time 60 min and initial Pb(II) ions concentration of 60 mg L–1. The adsorption kinetics of Pb(II) ions on DCFA was found to follow a pseudo-second-order kinetic model. The adsorption isotherm data were fitted to the Langmuir model. Kinetics and adsorption isotherm studies suggest that the capacity and affinity of the DCFA in adsorbing Pb(II) ions is significantly improved compared to those of non-immobilized activated coal fly ash (ACFA).

scholarly journals Adsorptive removal of phosphate by a Fe–Mn–La tri-metal composite sorbent: Adsorption capacity, influence factors, and mechanism

2020 ◽  
Vol 38 (7-8) ◽  
pp. 254-270
Author(s):  
Yuanrong Zhu ◽  
Xianming Yue ◽  
Fazhi Xie
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Photoelectron Spectroscopy ◽  
Phosphate Removal ◽  
Maximum Adsorption Capacity ◽  
Hydroxyl Groups ◽  
Metal Composite ◽  
Order Kinetic ◽  
Composite Sorbent ◽  
Composite Adsorbent

Reducing input of phosphorus is the key step for control of eutrophication and algal blooming in freshwater lakes. Adsorption technology is a cost-effective technology for phosphate removal in water for the purpose. Thus, in this study, a novel Fe–Mn–La tri-metal composite sorbent was developed, and then evaluated for phosphate removal. The results showed that the maximum adsorption capacity could be approached to 61.80 mg g−1 at 25°C under pH of 6.03. Adsorption of phosphate by Fe–Mn–La tri-metal composite adsorbent fitted better by pseudo-second-order kinetic equation and Langmuir model, which suggested that the adsorption process was surface chemical reactions and mainly in a monolayer coverage manner. The thermodynamic study indicated that the adsorption reaction was an endothermic process. The phosphate removal gradually decreased with the increasing of pH from 3.02 to 11.00. The sequence of coexisting anions competing with phosphates was that CO32− > Cl− > SO42− > NO3−. Dissolved organic matter, fulvic acid as a representative, would also decrease adsorption capacities of phosphate by Fe–Mn–La tri-metal composite adsorbents. Adsorption capacity would be decreased with increasing addition of adsorbents, while removal efficiency would be increased in this process. The Fe–Mn–La tri-metal composite adsorbent showed a good reusability when applied to removal of dissolved phosphate from aqueous solutions. The Fourier transform infrared spectrometer and X-ray photoelectron spectroscopy analyses indicated that some hydroxyl groups (–OH) on the surface of adsorbent were replaced by the adsorbed PO43−, HPO42−, or H2PO4−. Aggregative results showed that the novel Fe–Mn–La tri-mental composite sorbent is a very promising adsorbent for the removal of phosphate from aqueous solutions.

Utilization of cross-linked chitosan/bentonite composite in the removal of methyl orange from aqueous solution

2014 ◽  
Vol 71 (2) ◽  
pp. 174-182 ◽  
Author(s):  
Ruihua Huang ◽  
Qian Liu ◽  
Lujie Zhang ◽  
Bingchao Yang
Keyword(s):  
Methyl Orange ◽  
Aqueous Solutions ◽  
Ph Value ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Wide Ph Range ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Ph Range ◽  
A Minor

A kind of biocomposite was prepared by the intercalation of chitosan in bentonite and the cross-linking reaction of chitosan with glutaraldehyde, which was referred to as cross-linked chitosan/bentonite (CCS/BT) composite. Adsorptive removal of methyl orange (MO) from aqueous solutions was investigated by batch method. The adsorption of MO onto CCS/BT composite was affected by the ratio of chitosan to BT and contact time. pH value had only a minor impact on MO adsorption in a wide pH range. Adsorption kinetics was mainly controlled by the pseudo-second-order kinetic model. The adsorption of MO onto CCS/BT composite followed the Langmuir isotherm model, and the maximum adsorption capacity of CCS/BT composite calculated by the Langmuir model was 224.8 mg/g. Experimental results indicated that this adsorbent had a potential for the removal of MO from aqueous solutions.

scholarly journals Sorptive removal of phenanthrene from aqueous solutions using magnetic and non-magnetic rice husk-derived biochars

2018 ◽  
Vol 5 (5) ◽  
pp. 172382 ◽  
Author(s):  
Wei Guo ◽  
Shujuan Wang ◽  
Yunkai Wang ◽  
Shaoyong Lu ◽  
Yue Gao
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Functional Groups ◽  
Rice Husk ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Adsorption Data ◽  
Magnetic Modification ◽  
Pseudo Second Order ◽  
Rice Husk Biochar

A magnetically modified rice husk biochar (MBC) was successfully prepared by a hydrothermal method from original biochar (BC) and subsequently used to remove phenanthrene (PHE) from aqueous solutions. The porosity, specific surface area and hydrophobicity of BC were significantly improved (approx. two times) after magnetic modification. The adsorption data fitted well to pseudo-second-order kinetic and Langmuir models. Compared with BC, MBC had a faster adsorption rate and higher adsorption capacity of PHE. The adsorption equilibrium for PHE on MBC was achieved within 1.0 h. The maximum adsorption capacity of PHE on MBC was 97.6 mg g −1 based on the analysis of the Sips model, which was significantly higher than that of other sources of BCs. The adsorption mechanism of the two BCs was mainly attributed to the action of surface functional groups and π–π-conjugated reactions. The adsorption of PHE on MBC mainly occurred in the functional groups of C–O and Fe 3 O 4 , but that on BC was mainly in the functional groups of –OH, N–H, C=C and C–O.

Sign in / Sign up

Export Citation Format

Share Document