The Possibilities of Evaluating the Yield Strength in the Heat Affected Zones of a Weld through Indentation

2016 ◽  
Vol 368 ◽  
pp. 20-24
Author(s):  
Petr Hanus ◽  
Eva Schmidová
Keyword(s):  
Mechanical Properties ◽  
Yield Strength ◽  
Automotive Industry ◽  
Welded Joints ◽  
Welding Process ◽  
Main Tool ◽  
High Strength ◽  
Basic Material ◽  
Elastic Plastic ◽  
Critical Areas

The research focuses on elastic-plastic behaviour of welded joints of materials which are commonly used in both constructional practice and the automotive industry. The examined welded joints are oriented to a common constructional S355 and a modern high-strength steel DOMEX 700MC.The main tool for the assessment of the elastic-plastic response was the methodology based on the instrumented penetration testing with the use of a cylindrical indenter. The indentation tool was applied into narrow zones of welded boundaries. These zones represent critical areas of welded constructions because of a changing structure and different mechanical properties than the basic material possesses. The indentation data were recalculated to the mechanical properties in shear with the help of Hencky ́s hypotheses about material behaviour. The correctness of the used methodology was verified by a tensile test. The aim of the work is to determine optimal methods for defining a yield strength and to find a hardening trend in the zones. The comparison of these steels revealed different changes due to the welding process. A substantial decrease of the yield strength of Domex700MC was observed, as a contrary to a stable, or partially increased, yield strength of the S355 steel. Structural analyses revealed a different material response of the evaluated steels, according to a different hardness in the heat affected zone.

Metodología para el desarrollo de trayectorias en la aplicación por el proceso de soldadura GMAW en un robot industrial

2019 ◽  
pp. 1-4
Author(s):  
Josué Rafael Sánchez-Lerma ◽  
Luis Armando Torres-Rico ◽  
Héctor Huerta-Gámez ◽  
Ismael Ruiz-López
Keyword(s):  
Mechanical Properties ◽  
Automotive Industry ◽  
Industrial Robot ◽  
Welding Process ◽  
High Strength ◽  
Test Material ◽  
Advantages And Disadvantages ◽  
Application Characteristics ◽  
Joining Process ◽  
Gmaw Welding

This paper proposes the development of the methodology to be carried out for the metal joining process through the GMAW welding process in the Fanuc LR Mate 200iD industrial robot. The parameters or properties were considered for the application to be as efficient as possible, such parameters as speed of application, characteristics of the filler material, gas to be used as welding protection. The GMAW welding process can be applied semiautomatically using a hand gun, in which the electrode is fed by a coil, or an automatic form that includes automated equipment or robots. The advantages and disadvantages of the GMAW welding process applied in a manual and automated way were commented. The mechanical properties of the materials to which said welding can be applied were investigated; The materials with which this type of welding can be worked are the high strength materials, which are used in the automotive industry, for the forming of sheet metal. To know the properties of the material, destructive tests were carried out on the test material to be used, as well as the mechanical properties of the welding.

Development of High-Strength Steel Plates for Low-Temperature Use

1988 ◽  
Vol 110 (3) ◽  
pp. 171-176
Author(s):  
Y. Nakano ◽  
Y. Saito ◽  
K. Amano ◽  
M. Koda ◽  
Y. Sannomiya ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Low Temperature ◽  
Yield Strength ◽  
Structural Steel ◽  
Welded Joints ◽  
High Strength Steel ◽  
Control Process ◽  
Charpy Impact ◽  
High Strength ◽  
Steel Plates

This paper describes the metallurgical approaches for producing 415MPa and 460MPa yield strength offshore structural steel plates and the mechanical properties of the steel plates and their welded joints. A thermo-mechanical control process (TMCP) was adopted to manufacture YP415MPa and YP460MPa steel plates with weldability comparable to conventional YP355MPa steel plates. The Charpy impact and CTOD tests of the steel plates and their welded joints proved to be very good.

Research on Welding Process of Low Alloy High Strength Steel 20MnTiB

2019 ◽  
Vol 815 ◽  
pp. 114-119
Author(s):  
Zhen Liang Li ◽  
Hao Ke ◽  
Yang Shen ◽  
Xi Wang ◽  
Jiao Zhong
Keyword(s):  
Mechanical Properties ◽  
Welded Joints ◽  
High Strength Steel ◽  
Welded Joint ◽  
Welding Process ◽  
High Strength ◽  
Post Heat Treatment ◽  
Line Energy ◽  
Metallographic Structure ◽  
Strength Change

In this paper, the properties of the base metal of the low-alloy high-strength steel 20MnTiB, the welding process and the microstructure and properties of the welded joints were studied. The results are as follows: post-heat treatment below 400°C, the strength change of the steel decreases slowly, the elongation does not change significantly, and the metallographic structure is not obvious. When the temperature is above 400, the strength is greatly reduced. And its plasticity increases remarkably, and precipitates on the grain boundary are precipitated and grown on the metallographic structure. When the line energy is in the range of 9.6~12.0kJ/cm, the mechanical properties and microstructure of the welded joints meet the requirements, and the welding process that meets the requirements is studied. Finally, the mechanical properties and microstructure of the welded joint are studied. Provide a reference for the research and application of steel.

Prediction of heat affected zone and other mechanical properties of welded joints of HSLA A588-B of jet blast deflector

2019 ◽  
Vol 16 (4) ◽  
pp. 438-444 ◽  
Author(s):  
Utkarsh Waghmare ◽  
A.S. Dhoble ◽  
Ravindra Taiwade ◽  
Jagesvar Verma ◽  
Himanshu Vashishtha
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Heat Affected Zone ◽  
Welded Joints ◽  
Welding Process ◽  
High Strength ◽  
Generation Process ◽  
Content Type ◽  
Welding Processes ◽  
Scanning Electron

Purpose The purpose of this paper is to predict and optimize the width of heat affected zone (HAZ) with better mechanical properties using suitable welding process and parameters for the fabrication of jet blast deflector (JBD) (high strength low alloy material of grade A588-B was used for fabrication) so that the JBD can sustain high exhaust parameters, because there are different welding zones formed due to the rapid cooling of weld metals. Out of the various zones of welding, HAZ remains the weakest zone in the entire weldment. Design/methodology/approach The present work describes the modeling, simulation, Modeling of three-dimensional plate and mess generation process are carried out using ICEM CFD software. FLUENT 16.0 software is used for ANSYS simulation where various models are used for analysis and results are validated with the experimental outcomes. High strength low alloy plates are welded by using shielded metal arc welding and tungsten inert gas (TIG) welding processes with two different electrodes. Optical microscopy and scanning electron microscopy were used for metallurgical study. The mechanical properties were evaluated by tensile strength test, vickers microhardness test and impact test. The corrosion resistance was evaluated by performing the potentiodynamic polarization test. Findings The present study indicated for better mechanical properties and improved corrosion resistance for TIG welded joints with type 308 L filler. Practical implications In aeronautical, defense, space and research organizations. Originality/value It can be shown from the scanning electron microscope technique that sound weld joint is produced with very good mechanical properties and joint also showed better corrosion resistance.

scholarly journals The Ultimate Load Estimation of Welded Joints of High-Strength Steels subject to Mechanical and Geometric Heterogeneity

2020 ◽  
pp. 99-108
Author(s):  
S B Sapozhnikov ◽  
M A Ivanov ◽  
I A Shcherbakov
Keyword(s):  
Mechanical Properties ◽  
Yield Strength ◽  
Base Metal ◽  
Welded Joints ◽  
Stress Concentrator ◽  
Ultimate Load ◽  
Welded Joint ◽  
High Strength Steels ◽  
High Strength ◽  
Welding Wire

In this paper we consider the problems arising in the numerical estimation of the ultimate load of welded joints of high-strength steels with slight hardening. The stress concentrator in the transition node from the deposited to the base metal is modeled based on the example of welding a roller wire on a plate made of high-strength steel. The use of welding wire with a yield point lower than that of the base metal allowed to simulate areas of the welded joint with heterogeneous mechanical properties. The geometry of three areas of the welded joint is studied, i.e. weld metal, heat-affected zone (HAZ) and the base metal. Mechanical properties of all three areas are determined by calculation and experimentally. For this purpose, it is proposed to consider the material in all sections as ideally elastic-plastic, and the yield strength is uniquely associated with the hardness in the indentation zone (a Rockwell diamond cone is used). Calculations of the inelastic indentation process by the finite element method (FEM) in axis-symmetric formulation allowed obtaining a linear relationship between the hardness and the yield strength with a coefficient of 0.418. Tests at a quasi-static three-point bend (with stretching in the surfacing area) were carried out on sample beams cut perpendicular to the direction of welding. The “force-deflection” diagrams are obtained and compared with the calculated curves (FEM in a three-dimensional formulation with an explicit consideration of the complex configuration of all sections and different yield stress in the areas determined by local hardness values). There is a good agreement between the calculated and experimental ultimate loads. The proposed method of the three-stage study (determination of local hardness, yield strength in the areas and the ultimate load) can be effectively used to assess the ultimate loads of the welded joints due to the low parametricity of the proposed models of materials inelastic deformation in areas for which it is impossible to manufacture standard samples for the study of mechanical properties. The experimental study of the strengthening effect of the seam with a stress concentrator in the form of an angle of 90 degrees on the value of the ultimate bending load showed that the removal of the deposited metal does not lead to an increase in the ultimate load of the welded joint when using the welding wire of low-carbon high-plastic steel.

scholarly journals Comprehensive Analysis of the Microstructure and Mechanical Properties of Friction-Stir-Welded Low-Carbon High-Strength Steels with Tensile Strengths Ranging from 590 MPa to 1.5 GPa

2021 ◽  
Vol 11 (12) ◽  
pp. 5728
Author(s):  
HyeonJeong You ◽  
Minjung Kang ◽  
Sung Yi ◽  
Soongkeun Hyun ◽  
Cheolhee Kim
Keyword(s):  
Mechanical Properties ◽  
Tensile Test ◽  
Joint Strength ◽  
Solid Phase ◽  
Welding Process ◽  
High Strength Steels ◽  
High Strength ◽  
Low Carbon ◽  
Friction Stir ◽  
Welding Processes

High-strength steels are being increasingly employed in the automotive industry, requiring efficient welding processes. This study analyzed the materials and mechanical properties of high-strength automotive steels with strengths ranging from 590 MPa to 1500 MPa, subjected to friction stir welding (FSW), which is a solid-phase welding process. The high-strength steels were hardened by a high fraction of martensite, and the welds were composed of a recrystallized zone (RZ), a partially recrystallized zone (PRZ), a tempered zone (TZ), and an unaffected base metal (BM). The RZ exhibited a higher hardness than the BM and was fully martensitic when the BM strength was 980 MPa or higher. When the BM strength was 780 MPa or higher, the PRZ and TZ softened owing to tempered martensitic formation and were the fracture locations in the tensile test, whereas BM fracture occurred in the tensile test of the 590 MPa steel weld. The joint strength, determined by the hardness and width of the softened zone, increased and then saturated with an increase in the BM strength. From the results, we can conclude that the thermal history and size of the PRZ and TZ should be controlled to enhance the joint strength of automotive steels.

Vibratory weld conditioning during gas tungsten arc welding of al 5052 alloy on the mechanical and micro-structural behavior

2020 ◽  
Vol 17 (6) ◽  
pp. 831-836
Author(s):  
M. Vykunta Rao ◽  
Srinivasa Rao P. ◽  
B. Surendra Babu
Keyword(s):  
Mechanical Properties ◽  
Grain Size ◽  
Tensile Strength ◽  
Ultimate Tensile Strength ◽  
Welded Joints ◽  
Great Influence ◽  
Welding Process ◽  
Microstructural Characterization ◽  
Content Type ◽  
Average Grain Size

Purpose Vibratory weld conditioning parameters have a great influence on the improvement of mechanical properties of weld connections. The purpose of this paper is to understand the influence of vibratory weld conditioning on the mechanical and microstructural characterization of aluminum 5052 alloy weldments. An attempt is made to understand the effect of the vibratory tungsten inert gas (TIG) welding process parameters on the hardness, ultimate tensile strength and microstructure of Al 5052-H32 alloy weldments. Design/methodology/approach Aluminum 5052 H32 specimens are welded at different combinations of vibromotor voltage inputs and time of vibrations. Voltage input is varied from 50 to 230 V at an interval of 10 V. At each voltage input to the vibromotor, there are three levels of time of vibration, i.e. 80, 90 and 100 s. The vibratory TIG-welded specimens are tested for their mechanical and microstructural properties. Findings The results indicate that the mechanical properties of aluminum alloy weld connections improved by increasing voltage input up to 160 V. Also, it has been observed that by increasing vibromotor voltage input beyond 160 V, mechanical properties were reduced significantly. It is also found that vibration time has less influence on the mechanical properties of weld connections. Improvement in hardness and ultimate tensile strength of vibratory welded joints is 16 and 14%, respectively, when compared without vibration, i.e. normal weld conditions. Average grain size is measured as per ASTM E 112–96. Average grain size is in the case of 0, 120, 160 and 230 is 20.709, 17.99, 16.57 and 20.8086 µm, respectively. Originality/value Novel vibratory TIG welded joints are prepared. Mechanical and micro-structural properties are tested.

Sign in / Sign up

Export Citation Format

Share Document