Antimicrobiologic Property Hydrated Amorphous Calcium Phosphates Containing Silver

2005 ◽  
Vol 284-286 ◽  
pp. 439-444 ◽  
Author(s):  
O.J. Aimanova ◽  
Racquel Z. LeGeros ◽  
V.A. Sinyayev
Keyword(s):  
Thermal Analysis ◽  
Nuclear Magnetic Resonance ◽  
Differential Thermal Analysis ◽  
Infrared Spectroscopy ◽  
Calcium Phosphate ◽  
Calcium Phosphates ◽  
Antimicrobial Effect ◽  
X Ray Diffraction ◽  
X Ray ◽  
E Coli

The purpose of this study was to determine the microbiologic effect silver (Ag) when incorporated in amorphous calcium phosphate (ACP) prepared from solutions containing calcium, phosphate and pyrophosphate ions. The preparations were obtained from solutions with phosphate/pyrophosphate ratio, P/P2 = 7/3, and characterized as ACP using X-ray diffraction, infrared spectroscopy, nuclear magnetic resonance and differential thermal analysis. The microbes tested were cultures of E. Coli, St. aureus, Ps aerogunosa, C. diphteroides and C. albicans in media alone (control), with ACP without Ag and with ACP containing different Ag concentrations. Results demonstrated the following: (1) Ag in ACP inhibited the growth of microorganisms in all five cultures, with ACP containing 3-6% Ag giving the greatest antimicrobial effect; (2) sensitivity to the antimicrobial action of Ag differed among the bacteria.

Synthesis of stoichiometric lead molybdate PbMoO4: An x-ray diffraction, Fourier transform infrared spectroscopy, and differential thermal analysis study

1996 ◽  
Vol 11 (3) ◽  
pp. 703-715 ◽  
Author(s):  
H. C. Zeng
Keyword(s):  
Thermal Analysis ◽  
Fourier Transform ◽  
Differential Thermal Analysis ◽  
Infrared Spectroscopy ◽  
Heating Rate ◽  
Fourier Transform Infrared Spectroscopy ◽  
Fourier Transform Infrared ◽  
Slow Heating ◽  
X Ray Diffraction ◽  
X Ray

The PbO/MoO3 system with 47%: 53%, 53%: 47%, and 50%: 50% molar ratios at various processing temperatures has been studied with x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and differential thermal analysis (DTA) methods. It is found that in addition to the crystallization of primary PbMoO4 phase, subphases such as Pb2MoO5 and PbMo2O7 are also formed. The remaining PbO and MoO3 are detected at certain stages of the thermal process due to localized powder inhomogeneity. Physical processes, such as sublimation, eutectic melting, solid to liquid, and liquid to vapor transformations are also investigated. In particular, evaporations of excessive PbO or MoO3 in the nonstoichiometric PbO/MoO3 can be correlated to thermal processing parameters. The current study has led to the following three processing guidelines to obtain stoichiometric PbMoO4: (i) for high temperature application, such as the Czochralski melt growth, it is suggested an excessive MoO3 (a few mol %) must be included and a slow heating rate should be employed; (ii) for low temperature synthesis, the stoichiometric PbO–MoO3 can be used, but with a fast heating rate; and (iii) PbO-rich PbO/MoO3 system is not recommended in PbMoO4 synthesis.

scholarly journals Complex phase evolution of Brushite-based calcium phosphate CaHPO4·2H2O using in situ high temperature X-ray diffraction and thermal analysis

2020 ◽  
Author(s):  
Mouatamid El Hazzat ◽  
Adnane El Hamidi ◽  
Mohammed Halim ◽  
said ARSALANE
Keyword(s):  
Thermal Analysis ◽  
Infrared Spectroscopy ◽  
High Temperature ◽  
Calcium Phosphate ◽  
Amorphous Phase ◽  
Phase Evolution ◽  
High Temperature Treatment ◽  
X Ray Diffraction ◽  
X Ray

Abstract This study focused on a detailed examination of the thermal behavior of Brushite-based calcium phosphate (CaHPO 4 .2H 2 O, DCPD) to identify and characterize the intermediate phases which have been the subject of previous several controversies. For that, in situ high-temperature X-ray diffraction supported by infrared spectroscopy, thermal analysis, and scanning electron microscopy analysis were used and the results showed that the progressive thermal stress of DCPD in air resulted in a heterogeneous formulation consisting of dibasic calcium phosphate anhydrous (CaHPO 4 , DCPA) and an amorphous phase, which appears at low temperatures (~160 °C) and persists up to 375 °C. The deep examination of the amorphous phase by infrared spectroscopy revealed that its chemical composition is similar to that of disordered calcium pyrophosphate (Ca 2 P 2 O 7 , CPP) with the appearance of a characteristic band δ(P-O-P), located at 740 cm -1 . This IR band is shifted to low frequencies (725 cm -1 ) as the temperature is increased, indicating the crystallization of the amorphous phase into γ-CPP. The high temperature treatment (≥ 375 °C) leads to b-CPP polymorph. According to the present characterization results, obtaining pure DCPA from the thermal dehydration of DCPD is not effective and leads to biphasic materials including an amorphous phase.

PENINGKATAN LAJU DISOLUSI ACYCLOVIR DENGAN METODE SISTEM DISPERSI PADAT MENGGUNAKAN POLOXAMER 188

2016 ◽  
Vol 5 (1) ◽  
pp. 6
Author(s):  
Budi Setiawan ◽  
Erizal Zaini ◽  
Salman Umar
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Differential Thermal Analysis ◽  
Fourier Transform Infrared ◽  
X Ray Diffraction ◽  
Poloxamer 188 ◽  
X Ray ◽  
Scanning Electron

Sebuah penelitian tentang sistem dispersi padat dari asiklovir dengan poloxamer 188 telah dilakukan formulasi dengan pencampuran secara fisika dengan rasio 1 : 1, 1 : 3, 1 : 5 dan dispersi padat 1 : 1, 1 : 3, 1 : 5 dan penggilingan 1:1 sebagai pembanding. Dispersi padat dibuat menggunakan metode pencairan (fusi), yang digabung dengan poloxamer 188 pada hotplate kemudian asiklovir dimasukkan ke dalam hasil poloxamer 188 lalu di kocok hingga membentuk masa homogen. Semua formula yang terbentuk termasuk asiklovir poloxamer 188 murni dianalisis karakterisasinya dengan Differential Thermal Analysis (DTA), X-ray Diffraction, Scanning Electron Microscopy (SEM), dan Fourier Transform Infrared (FTIR), kemudian pengambilan dilakukan  (penentuan kadar) mengunakan spektrofotometer UV pada panjang gelombang 257,08 nm dan uji laju disolusi dengan aquadest bebas CO2 menggunakan metode dayung. Hasil pengambilan  (penentuan kadar) menunjukkan bahwa semua formula memenuhi persyaratan farmakope Amerika edisi 30 dan farmakope Indonesia edisi 4 yaitu 95-110%. Sedangkan hasil uji laju disolusi untuk campuran fisik 1: 1, dan dispersi padat 1: 1, dan penggilingan 1: 1 menunjukkan peningkatan yang nyata dibandingkan asiklovir murni. Hal ini juga dapat dilihat dari hasil perhitungan statistik  menggunakan analisis varian satu arah  SPSS 17.

scholarly journals The Potential for Natural Stones from Northeastern Brazil to Be Used in Civil Construction

Minerals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 440
Author(s):  
Fabiana Pereira da Costa ◽  
Jucielle Veras Fernandes ◽  
Luiz Ronaldo Lisboa de Melo ◽  
Alisson Mendes Rodrigues ◽  
Romualdo Rodrigues Menezes ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Chemical Resistance ◽  
Mechanical Analysis ◽  
Northeastern Brazil ◽  
X Ray Diffraction ◽  
X Ray ◽  
Chemical Agents ◽  
Natural Stones

Natural stones (limestones, granites, and marble) from mines located in northeastern Brazil were investigated to discover their potential for use in civil construction. The natural stones were characterized by chemical analysis, X-ray diffraction, differential thermal analysis, and optical microscopy. The physical-mechanical properties (apparent density, porosity, water absorption, compressive and flexural strength, impact, and abrasion) and chemical resistance properties were also evaluated. The results of the physical-mechanical analysis indicated that the natural stones investigated have the potential to be used in different environments (interior, exterior), taking into account factors such as people’s circulation and exposure to chemical agents.

The Roman Ceramics of Salobrena (Granada-Spain) and their Raw Materials

1992 ◽  
Vol 267 ◽  
Author(s):  
Ana M De Andres ◽  
Isabel MuÑOZ
Keyword(s):  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Raw Materials ◽  
Third Century ◽  
Western Coast ◽  
X Ray Diffraction ◽  
X Ray ◽  
The Third ◽  
Good Number ◽  
Scanning Electron

ABSTRACTNineteen roman ceramic sherds found near Salobreña (Granada, Spain), in the western coast of the Mediterranean Sea, as well as different ceramic clays from the surroundingsare studied. Both clays and ceramic sherds are characterizad by X-ray diffraction and spectrometry, differential thermal analysis, and scanning electron and optical microscopies. A good number of the ceramic pieces, among which some “Terrae Sigillatae”, have a composition similar to that of the local clays and, thus, have been probably manufactured at Salobreña. Only a few of them have a foreign origin. For most of them, the firing temperature was about 800-850 °C, although some have been produced at 900-1000 °C, and some others at 1000-1100 °C. It is concluded that Salobreña appearsto have been an important settlement just in the third century of the Christian era.

scholarly journals Silica-Kaolin Mix Effect on Evaporative Pattern Castings Surface Roughness

2016 ◽  
Vol 16 (3) ◽  
pp. 83-88 ◽  
Author(s):  
B.V. Omidiji ◽  
R.H. Khan ◽  
M.S. Abolarin
Keyword(s):  
Thermal Analysis ◽  
Surface Roughness ◽  
Differential Thermal Analysis ◽  
Ratio Method ◽  
Gating System ◽  
X Ray Diffraction ◽  
Pouring Temperature ◽  
Material Loss ◽  
Refractory Coating ◽  
X Ray

Abstract The influence of the refractory coating which is a mixture of silica flour and kaolin on the surface roughness of the plate castings produced using evaporative patterns had been considered in this work. The kaolin was used as a binder and ratio method was employed to form basis for the factorial design of experiment which led to nine runs of experiments. Methyl alcohol at 99% concentration was used as the carrier for the transfer of the coating to the surface of the patterns. Pouring temperature was observed as a process parameter alongside the mix ratios of the coating. Attempts were made to characterize the refractory coating by using two methods; differential thermal analysis (DTA) and X-ray diffraction. Attempt was also made to characterize the casting material. Gating system design was done for the plate casting to determine the correct proportions of the gating parameters in order to construct the gating system properly to avoid turbulence during pouring of liquid metal. A digital profilometer was used to take the measurements of the surface roughness. It was observed that the mix ratio 90% silica flour-10% kaolin produced the lowest value of the surface roughness of the plate castings and had the lowest material loss in the DTA test. The pouring temperature of 650°C produced best casting.

scholarly journals SOLUBILITY OF GERMANIUM DISELENIDE IN THE Cu3AsSe4

2021 ◽  
Vol 0 (4) ◽  
pp. 67-70
Author(s):  
Z.T. Hasanova ◽  
Keyword(s):  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Phase Equilibria ◽  
Solid Solutions ◽  
X Ray Diffraction ◽  
X Ray

Differential thermal analysis and powder X-ray diffraction methods were used for phase equilibria studying in the Cu3AsSe4-GeSe2 system. It was established that wide (up to 30 mol.%) solid solutions based on Cu3AsSe4 are formed. GeSe2-rich alloys consist of various heterogeneous mixtures, including phases outside the T–x plane of this section

The (AgInSe2)1-x(VSe)x system (0 ≤x ≤ 0.5): X-ray diffraction and differential thermal analysis measurements

2005 ◽  
Vol 2 (10) ◽  
pp. 3766-3769 ◽  
Author(s):  
S. Durán ◽  
P. Grima ◽  
M. Muñoz ◽  
M. Quintero ◽  
J. Ruiz ◽  
...  
Keyword(s):  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
X Ray Diffraction ◽  
X Ray

Co-crystal formation between 2-amino-4,6-dimethylpyrimidine and new p-xylylene-bis(thioacetic) acid

CrystEngComm ◽  
2014 ◽  
Vol 16 (44) ◽  
pp. 10262-10272 ◽  
Author(s):  
A. Ostasz ◽  
R. Łyszczek ◽  
L. Mazur ◽  
B. Tarasiuk
Keyword(s):  
Thermal Analysis ◽  
Infrared Spectroscopy ◽  
Single Crystal ◽  
Crystal Formation ◽  
Thioacetic Acid ◽  
X Ray Diffraction ◽  
X Ray ◽  
Analysis Methods

Novelp-xylylene-bis(thioacetic) acid (p-XBTA) and its co-crystals with 2-amino-4,6-dimethylpyrimidine (DMP) have been synthesized and characterized by single-crystal X-ray diffraction, infrared spectroscopy and thermal analysis methods (TG/DSC).

Sign in / Sign up

Export Citation Format

Share Document