Investigation of Synthesis Parameters for Modification of Chitosan with Enrofloxacin

2015 ◽  
Vol 659 ◽  
pp. 436-440
Author(s):  
Saniwan Srithongkham ◽  
Piyawadee Sutcharee ◽  
Amornrat Lertworasirikul

This research aims to investigate synthesis parameters for modification of chitosan with enrofloxacin. Most modifications of chitosan are focused on amino group. There are many methods for modification of chitosan, for example, conjugation of amino group with carboxylic group by coupling agents. 1-Ethyl-3-(3-(dimethylamino) propyl) carbodiimide hydrochloride (WSC) andN-hydroxysuccinimide (NHS) are widely used coupling agents for amide formation under mild conditions. Those two coupling agents were applied in this study. Optimum amount and ratio of coupling agents, amount of enrofloxacin and reaction times were investigated. The chemical structures were characterized by Fourier transform infrared spectroscopy (FT-IR). The optimum synthesis conditions were determined from the absorbance ratios. Chitosan-enrofloxacin has antibacterial activity against bothS. aureusandE. coli.

2020 ◽  
Vol 32 (3) ◽  
pp. 580-586
Author(s):  
Ranjit V. Gadhave ◽  
Bhanudas S. Kuchekar

A new series of N-(benzo[d]thiazol-2-yl)-[1,2,4]triazolo[4,3-c]quinazoline-5-carboxamide derivatives were synthesized by condensation of [1,2,4]triazolo[4,3-c]quinazoline-5-carboxylate derivatives with substituted benzothiazoles. The chemical structures of the synthesized compounds were confirmed by FT-IR, MS and 1H NMR spectra. Designed triazoloquinazoline derivatives were docked with oxido-reductase enzyme (PDB Code 4h1j) and DNA gyrase enzyme (PDB Code 3g75). Based on high binding affinity score, the best compound were selected for synthesis and subjected to in vitro antioxidant and antibacterial activity. Compounds 7a and 7d were found to be most active compounds as antioxidant agent among this series when compared with ascorbic acid. Compounds 7a, 7d and 7f were found to be most active compounds as an antibacterial agents among this series when compared with ciprofloxacin against bacterial strains such as S. aureus (ATCC 25923), E. coli (ATCC 25922) and P. aeruginosa (ATCC 27853). Study revealed that the most active compounds after structural modifications can be exploited as lead molecules for other pharmacological activities such as anti-inflammatory, anticancer and antidepressant activities.


2014 ◽  
Vol 2014 ◽  
pp. 1-4 ◽  
Author(s):  
Hamid Beyzaei ◽  
Reza Aryan ◽  
Zahra Keshtegar

Synthesis of new imidazolidine and tetrahydropyrimidine derivatives 3a, b and 4a–c as cyclic 1,3-diamines under two reaction conditions (A and B) is described. Under reaction conditions-A, a suspension of (E)-2-cyano-2-(oxazolidin-2-ylidene)ethanethioamide 1 (1 eq.) and diaminoalkanes 2a–e (2 eq.) in absolute ethanol is heated under reflux for 16–22 h to afford 3a, b and 4a–c. Alternatively, under reaction conditions-B, a solution of thioamide 1 (1 eq.) in diaminoalkanes 2a–e (3 eq.) is stirred under solvent-free conditions at room temperature for 3 days to give desired products. Reaction conditions-A for having higher yields, shorter reaction times, and required less diamines is more effective than reaction conditions-B. Oxazolidine ring opening is observed by reacting compound 1 with all of the diamines 2a–e, but the thioamide group only reacts with nonbulky diamines 2a, b. The chemical structures of novel compounds were confirmed by 1H NMR, 13C NMR, elemental analysis, and FT-IR spectrometry.


2011 ◽  
Vol 121-126 ◽  
pp. 1234-1238
Author(s):  
Qing Quan Guo ◽  
Xiao Feng Wang ◽  
Lei Li ◽  
Da Guang Li ◽  
Wen Xin Zhu

With Ilmenite residues as raw material, the inorganic high molecular weigh coagulant is prepared by orthogonal experiment method. It shows that optimum synthesis conditions are: the polymerization temperature being 50°C, the dosage of acid being 20ml, the polymerization time being 2h,and the dosage of oxidant being 8ml. The structure and morphology characteristics are analyzed by FT-IR and SEM. The application of the coagulants in printing and dyeing wastewater treatment is explored.The coagulation experiment results show that the removals of chroma and COD are affected by preparation conditions.


2016 ◽  
Vol 66 (324) ◽  
pp. 102 ◽  
Author(s):  
G. M. Tsaousi ◽  
I. Douni ◽  
D. Panias

This paper deals with the characterization of perlite-based geopolymer pastes, using fine perlite as raw material. The present study examined the effects of the main synthesis parameters such as perlite to activator ratio, NaOH concentration, the addition of soluble silica to the activator, and curing temperatureon the setting time, the stability in an aquatic environment, the viscosity of the paste, and the compressive strength of the solidified geopolymers. The results showed that these inorganic polymer pastes are non-Newtonian shear thinning fluids that achieve low viscosities at high shear stresses. The optimum synthesis conditions for the geopolymer pastes proved to be a) a low initial NaOH concentration in the alkaline phase (2–5 M) and b) a solid to liquid ratio of 1.2–1.4 g/mL. If very fast setting is necessary, the pastes should be prepared with a soluble silica-doped alkaline activating phase and cured at high temperatures around 90 °C.


2019 ◽  
Vol 10 (1) ◽  
pp. 30-36 ◽  
Author(s):  
Maysoon Mohammed Almahdi ◽  
Ahmed Elsadig Mohammed Saeed ◽  
Nadia Hanafy Metwally

In the present study, a series of new pyrazoline derivatives bearing sulfanilamido moiety were synthesized and obtained in good yields. The chemical structures of the compounds were elucidated by spectral data (FT-IR, MS, UV-VIS and NMR). The synthesized compounds 41-70 were screened for their antimicrobial activity and compared with controls. The in vitro antibacterial activity of compounds 41-45 and 48-57 was checked against two Gram positive microorganisms (S. aureus and S. mutans) and three Gram negative microorganisms (E. coli, K. pneumonia and P. aureginosa), their antifungal activity was checked against C. albicans. The preliminary results showed that these compounds had moderate activity against the tested organisms. Compounds 41, 48, 51 and 56 exhibited promising antimicrobial activity against S. aureus compared to standard drug Ampicilin. Final synthesized compounds 58-70 were tested against two Gram positive (S. aureus and B. subtilis) and two Gram negative (E. coli and P. aureginosa) microorganisms, their activity against C. albicans was also checked and they did not exhibit any antimicrobial activity.


2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Muhammad Abdul Qadir ◽  
Mahmood Ahmed ◽  
Muhammad Iqbal

Novel sulfonamides were developed and structures of the new products were confirmed by elemental and spectral analysis (FT-IR, ESI-MS,1HNMR, and13CNMR). In vitro, developed compounds were screened for their antibacterial activities against medically important gram (+) and gram (−) bacterial strains, namely,S. aureus,B. subtilis,E. coli, andK. pneumoniae. The antibacterial activities have been determined by measuring MIC values (μg/mL) and zone of inhibitions (mm). Among the tested compounds, it was found that compounds 5a and 9a have most potent activity againstE. coliwith zone of inhibition:31±0.12 mm (MIC: 7.81 μg/mL) and30±0.12 mm (MIC: 7.81 μg/mL), respectively, nearly as active as ciprofloxacin (zone of inhibition:32±0.12 mm). In contrast, all the compounds were totally inactive against the gram (+)B. subtilis.


2018 ◽  
Vol 21 (4) ◽  
pp. 271-280 ◽  
Author(s):  
Mohammad A. Ghasemzadeh ◽  
Mohammad H. Abdollahi-Basir ◽  
Zahra Elyasi

Aim and Objective: The multi-component condensation of benzil, primary amines, ammonium acetate and various aldehydes was efficiently catalyzed using cobalt oxide nanoparticles under ultrasonic irradiation. This approach describes an effective and facile method for the synthesis of some novel 1,2,4,5-tetrasubstituted imidazole derivatives with several advantages such as high yields and short reaction times and reusability of the catalyst. Moreover, the prepared heterocyclic compounds showed high antibacterial activity against some pathogenic strains. Materials and Method: The facile and efficient approaches for the preparation of Co3O4 nanoparticles were carried out by one step method. The synthesized heterogeneous nanocatalyst was characterized by spectroscopic analysis including EDX, FE-SEM, VSM, XRD and FT-IR analysis. The as-synthesized cobalt oxide nanoparticles showed paramagnetic behaviour in magnetic field. In addition, the catalytic influence of the nanocatalyst was examined in the one-pot reaction of primary amines, benzil, ammonium acetate and diverse aromatic aldehydes under ultrasonic irradiation. All of the 1,2,4,5-tetrasubstituted imidazoles were investigated and checked with m.p., 1H NMR, 13C NMR and FT-IR spectroscopy techniques. The antibacterial properties of the heterocycles were evaluated in vitro by the disk diffusion against pathogenic strains such as Escherichia coli (EC), Bacillus subtillis (BS), Staphylococcus aureus (SA), Salmonellatyphi (ST) and Shigella dysentrae (SD) species. Results: In this research cobalt oxide nanostructure was used as a robust and green catalyst in the some novel imidazoles. The average particle size measured from the FE-SEM image is found to be 20-30 nm which confirmed to the obtained results from XRD pattern. Various electron-donating and electron-withdrawing aryl aldehydes were efficiently reacted in the presence of Co3O4 nanoparticles. The role of the catalyst as a Lewis acid is promoting the reactions with the increase in the electrophilicity of the carbonyl and double band groups. To investigate the reusability of the catalyst, the model study was repeated using recovered cobalt oxide nanoparticles. The results showed that the nanocatalyst could be reused for five times with a minimal loss of its activity. Conclusion: We have developed an efficient and environmentally friendly method for the synthesis of some tetrasubstituted imidazoles via three-component reaction of benzil, primary amines, ammonium acetate and various aldehydes using Co3O4 NPs. The present approach suggests different benefits such as: excellent yields, short reaction times, simple workup procedure and recyclability of the magnetic nanocatalyst. The prepared 1,2,4,5-tetrasubstituted imidazoles revealed high antibacterial activities and can be useful in many biomedical applications.


Materials ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 127 ◽  
Author(s):  
Yu Sun ◽  
Yazhen Wang ◽  
Li Liu ◽  
Tianyuan Xiao

A 9,10-dihydro-9-oxa-10-phosphaphenanthrene 10-oxide (DOPO) acrylate, (6-oxidodibenzo [c,e][1,2] oxaphosphinin-6-yl) methyl acrylate (DOPOAA), has been prepared. Copolymers of styrene (St) and DOPOAA were prepared by emulsion polymerization. The chemical structures of copolymers containing levels of DOPOAA were verified using Fourier transform infrared (FT-IR) spectroscopy and 1H nuclear magnetic resonance (1H-NMR) spectroscopy. The thermal properties and flame-retardant behaviors of DOPO-containing monomers and copolymers were observed using thermogravimetric analysis and micro calorimetry tests. From thermogravimetric analysis (TGA), it was found out that the T5% for decomposition of the copolymer was lower than that of polystyrene (PS), but the residue at 700 °C was higher than that of PS. The results from micro calorimetry (MCC) tests indicated that the rate for the heat release of the copolymer combustion was lower than that for PS. The limiting oxygen index (LOI) for combustion of the copolymer rose with increasing levels of DOPOAA. These data indicate that copolymerization of the phosphorus-containing flame-retardant monomer, DOPOAA, into a PS segment can effectively improve the thermal stability and flame retardancy of the copolymer.


2021 ◽  
Vol 3 (6) ◽  
Author(s):  
Kobra Nikoofar ◽  
Fatemeh Shahriyari

AbstractA simple, straightforward, and ultrasound-promoted method for the preparation of some highly functionalized tetrahydropyridines reported via pseudo five-component reaction of (hetero)aromatic aldehydes, different anilines, and alkyl acetoacetates in the presence of [N-CH2CO2H-3-pic]+HSO4−, as a novel ionic liquid, in green aqueous medium. The IL was synthesized utilizing simple and easily-handled substrates and characterized by FT-IR, 1H NMR, 13C NMR, GC-MASS, FESEM, EDX, and TGA/DTG techniques. The procedure contains some highlighted aspects which are: (a) performing the MCR in the presence of aqua and sonic waves, as two main important and environmentally benign indexes in green and economic chemistry, (b) high yields of products within short reaction times, (c) convenient work-up procedure, (d) preparing the new IL via simple substrates and procedure.


Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 878
Author(s):  
Krystyna Wnuczek ◽  
Andrzej Puszka ◽  
Łukasz Klapiszewski ◽  
Beata Podkościelna

This study presents the preparation and the thermo-mechanical characteristics of polymeric blends based on di(meth)acrylates monomers. Bisphenol A glycerolate diacrylate (BPA.GDA) or ethylene glycol dimethacrylate (EGDMA) were used as crosslinking monomers. Methyl methacrylate (MMA) was used as an active solvent in both copolymerization approaches. Commercial polycarbonate (PC) was used as a modifying soluble additive. The preparation of blends and method of polymerization by using UV initiator (Irqacure® 651) was proposed. Two parallel sets of MMA-based materials were obtained. The first included more harmless linear hydrocarbons (EGDMA + MMA), whereas the second included the usually used aromatic copolymers (BPA.GDA + MMA). The influence of different amounts of PC on the physicochemical properties was discussed in detail. Chemical structures of the copolymers were confirmed by attenuated total reflection–Fourier transform infrared (ATR/FT-IR) spectroscopy. Thermo-mechanical properties of the synthesized materials were investigated by means of differential scanning calorimetry (DSC), thermogravimetric (TG/DTG) analyses, and dynamic mechanical analysis (DMA). The hardness of the obtained materials was also tested. In order to evaluate the surface of the materials, their images were obtained with the use of atomic force microscopy (AFM).


Sign in / Sign up

Export Citation Format

Share Document