Barofractionation as an Innovative Method to Obtain Pectic Polysaccharides

2021 ◽  
Vol 899 ◽  
pp. 599-605
Author(s):  
Dara Slobodova ◽  
Raisa Gorshkova ◽  
Stanislav Pankov
Keyword(s):  
High Pressure ◽  
Physicochemical Parameters ◽  
New Method ◽  
High Yield ◽  
Dynamic Mode ◽  
High Quality ◽  
Pectic Polysaccharides ◽  
Ph Values ◽  
Pectin Polysaccharides ◽  
Innovative Method

An innovative method has been developed and an installation has been created for obtaining pectin polysaccharides in a dynamic mode under the influence of high pressure. The process of degradation of protopectin at various pH values pH of the hydrolyzing agent was studied using the example of sunflower baskets. It has been established that the use of the new method makes it possible to obtain high-quality target products with a high yield in gentle conditions. The possibility of combining the stages of hydrolysis-extraction and fractionation has been demonstrated, which makes it possible to control the process of obtaining pectic polysaccharides in the direction of obtaining substances with specified physicochemical parameters.

Effects of high pressure on the crystallization of carbon fiber reinforced polyetheretherketone (CF/PEEK) laminate composites

1990 ◽  
Vol 48 (4) ◽  
pp. 876-877
Author(s):  
Hong-Ming Lin ◽  
C. H. Liu ◽  
R. F. Lee
Keyword(s):  
High Pressure ◽  
Carbon Fiber ◽  
Sample Surface ◽  
High Yield ◽  
Fiber Reinforced ◽  
Laminate Composites ◽  
Peek Composite ◽  
Continuous Carbon Fiber ◽  
Carbon Fiber Reinforced

Polyetheretherketone (PEEK) is a crystallizable thermoplastic used as composite matrix materials in application which requires high yield stress, high toughness, long term high temperature service, and resistance to solvent and radiation. There have been several reports on the crystallization behavior of neat PEEK and of CF/PEEK composite. Other reports discussed the effects of crystallization on the mechanical properties of PEEK and CF/PEEK composites. However, these reports were all concerned with the crystallization or melting processes at or close to atmospheric pressure. Thus, the effects of high pressure on the crystallization of CF/PEEK will be examined in this study.The continuous carbon fiber reinforced PEEK (CF/PEEK) laminate composite with 68 wt.% of fibers was obtained from Imperial Chemical Industry (ICI). For the high pressure experiments, HIP was used to keep these samples under 1000, 1500 or 2000 atm. Then the samples were slowly cooled from 420 °C to 60 °C in the cooling rate about 1 - 2 degree per minute to induce high pressure crystallization. After the high pressure treatment, the samples were scanned in regular DSC to study the crystallinity and the melting temperature. Following the regular polishing, etching, and gold coating of the sample surface, the scanning electron microscope (SEM) was used to image the microstructure of the crystals. Also the samples about 25mmx5mmx3mm were prepared for the 3-point bending tests.

scholarly journals Innovative Method for Calculating the Break-Even for Multi-Assortment Production

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4213
Author(s):  
Dariusz Fuksa
Keyword(s):  
Coal Mines ◽  
New Method ◽  
Hard Coal ◽  
Customer Demand ◽  
Innovative Method ◽  
The Subject ◽  
Economic Health ◽  
Production Plans ◽  
A Company ◽  
A Current

The subject of the article is a new method that I have developed for calculating a multi-asset break-even for multi-assortment production, extended by a percentage threshold and a current sales ratio (which was missing in previously published methods). The percentage threshold provides unambiguous information about the economic health of a company. As a result, it became possible to use it in practice to evaluate the activities of economic entities (mines) and to perform modelling and optimisation of production plans based on different variants of customer demand scenarios. The publication addresses the complexity of the problem of determining the break-even in multi-assortment production. Moreover, it discusses the practical limitations of previous methods and demonstrates the usefulness of the proposed method on the example of hard coal mines.

Selection of high-quality sperm with thousands of parallel channels

Lab on a Chip ◽  
2021 ◽  
Author(s):  
Mohammad Simchi ◽  
Jason Riordon ◽  
Jae Bem You ◽  
Yihe Wang ◽  
Sa Xiao ◽  
...  
Keyword(s):  
Clinical Practice ◽  
High Selectivity ◽  
High Yield ◽  
Sperm Selection ◽  
High Quality ◽  
Parallel Channels ◽  
Selection Of

A 3D-structured sperm selection device is presented that achieves both high selectivity and high yield via thousands of parallel channels. The device significantly outperforms the best clinical practice by selecting ∼100 000 of higher-quality sperm.

scholarly journals A Novel and Efficient High-Yield Method for Preparing Bacterial Ghosts

Toxins ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 420
Author(s):  
Yi Ma ◽  
Liu Cui ◽  
Meng Wang ◽  
Qiuli Sun ◽  
Kaisheng Liu ◽  
...  
Keyword(s):  
Large Scale ◽  
Expression System ◽  
High Yield ◽  
Wild Type ◽  
High Quality ◽  
Efficient Protection ◽  
Bacterial Ghosts ◽  
Cell Envelopes ◽  
Extracellular Structures ◽  
First Time

Bacterial ghosts (BGs) are empty cell envelopes possessing native extracellular structures without a cytoplasm and genetic materials. BGs are proposed to have significant prospects in biomedical research as vaccines or delivery carriers. The applications of BGs are often limited by inefficient bacterial lysis and a low yield. To solve these problems, we compared the lysis efficiency of the wild-type protein E (EW) from phage ΦX174 and the screened mutant protein E (EM) in the Escherichia coli BL21(DE3) strain. The results show that the lysis efficiency mediated by protein EM was improved. The implementation of the pLysS plasmid allowed nearly 100% lysis efficiency, with a high initial cell density as high as OD600 = 2.0, which was higher compared to the commonly used BG preparation method. The results of Western blot analysis and immunofluorescence indicate that the expression level of protein EM was significantly higher than that of the non-pLysS plasmid. High-quality BGs were observed by SEM and TEM. To verify the applicability of this method in other bacteria, the T7 RNA polymerase expression system was successfully constructed in Salmonella enterica (S. Enterica, SE). A pET vector containing EM and pLysS were introduced to obtain high-quality SE ghosts which could provide efficient protection for humans and animals. This paper describes a novel and commonly used method to produce high-quality BGs on a large scale for the first time.

High Microsatellite and SNP Genotyping Success Rates Established in a Large Number of Genomic DNA Samples Extracted From Mouth Swabs and Genotypes

2006 ◽  
Vol 9 (4) ◽  
pp. 501-506 ◽  
Author(s):  
Josine L. Min ◽  
Nico Lakenberg ◽  
Margreet Bakker-Verweij ◽  
Eka Suchiman ◽  
Dorret I. Boomsma ◽  
...  
Keyword(s):  
Success Rate ◽  
Genomic Dna ◽  
Snp Genotyping ◽  
High Yield ◽  
Success Rates ◽  
Nucleotide Polymorphism ◽  
High Quality ◽  
Single Nucleotide ◽  
Dna Yield ◽  
Yield And Quality

AbstractIn this article, we present the genomic DNA yield and the microsatellite and single nucleotide polymorphism (SNP) genotyping success rates of genomic DNA extracted from a large number of mouth swab samples. In total, the median yield and quality was determined in 714 individuals and the success rates in 378,480 genotypings of 915 individuals. The median yield of genomic DNA per mouth swab was 4.1 μg (range 0.1–42.2 μg) and was not reduced when mouth swabs were stored for at least 21 months prior to extraction. A maximum of 20 mouth swabs is collected per participant. Mouth swab samples showed in, respectively, 89% for 390 microsatellites and 99% for 24 SNPs a genotyping success rate higher than 75%. A very low success rate of genotyping (0%–10%) was obtained for 3.2% of the 915 mouth swab samples using microsatellite markers. Only 0.005% of the mouth swab samples showed a geno-typing success rate lower than 75% (range 58%–71%) using SNPs. Our results show that mouth swabs can be easily collected, stored by our conditions for months prior to DNA extraction and result in high yield and high-quality DNA appropriate for genotyping with high success rate including whole genome searches using microsatellites or SNPs.

High-yield synthesis of CsPbBr3 nanoparticles: Diphenylphosphine as a reducing agent and its effect in Pb-seeding nucleation and growth

2021 ◽  
Author(s):  
Eder Antonio Castillo-Ruiz ◽  
Diana Fabiola Garcia-Gutierrez ◽  
Domingo Ixcóatl Garcia-Gutierrez
Keyword(s):  
Nucleation And Growth ◽  
Reducing Agent ◽  
High Yield ◽  
Reaction Yield ◽  
High Quality ◽  
Stabilizing Agents ◽  
Nucleation Sites ◽  
Nucleation Mechanisms ◽  
Attractive Option ◽  
Mass Increment

Abstract Based on the reported nucleation mechanisms for CsPbX3 and II-VI/IV-VI quantum dots, CsPbBr3 nanoparticles with a high reaction-yield, up to 393% mass-increment, were synthesized by the hot-injection method. The introduction of diphenylphosphine (DPP) as a reducing agent improved nanoparticle nucleation and growth, giving out evidence for Pb-seeding in CsPbBr3 nanoparticles formation. Additionally, a clear influence of the DPP in a CsPbBr3-Cs4PbBr6 incomplete phase transformation was observed, marked by the appearance of several PbBr2 nanoparticles, indicating the need for an improved ratio between the stabilizing agents and the precursors, due to the increased number of nucleation sites produced by the DPP. The resulting CsPbBr3 nanoparticles showed high quality, as they displayed 70%-90% photoluminescence quantum yield (PLQY), narrow size distribution with an average nanoparticle size of ~10 nm and the characteristic cubic morphology reported in previous works. This increment in CsPbBr3 nanoparticles’ reaction yield will contribute to making them a more attractive option for different optoelectronic applications.

Sign in / Sign up

Export Citation Format

Share Document