scholarly journals Characterization of quinoa (Chenopodium quinoa Willd.) accessions for the saponin content in Mediterranean environment

2016 ◽  
Vol 11 ◽  
Author(s):  
Giuditta De Santis ◽  
Carmen Maddaluno ◽  
Tiziana D’Ambrosio ◽  
Agata Rascio ◽  
Michele Rinaldi ◽  
...  
Keyword(s):  
Chenopodium Quinoa ◽  
Mediterranean Area ◽  
Breeding Goal ◽  
Total Saponin ◽  
Saponin Content ◽  
Superior Genotypes ◽  
Improvement Programs ◽  
High Yields ◽  
Selection Of

Seeds of the Andean seed crop quinoa (<em>Chenopodium</em> <em>quinoa</em> Willd.) usually contain saponins in the seed coat. Saponins give a bitter taste sensation and are a serious antinutritional factor, therefore selection of sweet genotypes with a very low saponin content in the seeds is a main breeding goal. The objective of this work was to identify, within germplasm lines of quinoa, previously selected for production and quality traits, superior genotypes low in saponins. For this purpose the total saponin content was determined in seeds of eight lines of quinoa and one variety (cv. Regalona Baer) as a control, previously evaluated over a 2-year period in a Southern Italy environment. Significant variation for the saponin content was observed among the evaluated genotypes. The total saponin content ranged from 0.10 to 1.80 %, with the Q12 genotype showing the lowest value, suggesting the possibility of selecting genotypes "sweet" to be used in subsequent genetic improvement programs. Based on these results, in fact, it was possible to identify, among the accessions previously selected, particularly suitable for growing in Mediterranean area, some genotypes with high yields of seed (2.5 the<sup>-1</sup>, on average), high protein (17%, on average) and fibers (13%, on average) and low content in saponins (0.57%, on average).

scholarly journals Analysis of the quinoa genome reveals conservation and divergence of the flowering pathways

2019 ◽  
Vol 20 (2) ◽  
pp. 245-258 ◽  
Author(s):  
Agnieszka A. Golicz ◽  
Ursula Steinfort ◽  
Hina Arya ◽  
Mohan B. Singh ◽  
Prem L. Bhalla
Keyword(s):  
Crop Improvement ◽  
Chenopodium Quinoa ◽  
Flower Initiation ◽  
Flowering Genes ◽  
The Andes ◽  
Grain Crop ◽  
Improvement Programs ◽  
Flowering Regulation ◽  
High Yields ◽  
Modern Breeding

Abstract Quinoa (Chenopodium quinoa Willd.) is a grain crop grown in the Andes renowned as a highly nutritious plant exhibiting tolerance to abiotic stress such as drought, cold and high salinity. Quinoa grows across a range of latitudes corresponding to differing day lengths, suggesting regional adaptations of flowering regulation. Improved understanding and subsequent modification of the flowering process, including flowering time, ensuring high yields, is one of the key factors behind expansion of cultivation zones and goals of the crop improvement programs worldwide. However, our understanding of the molecular basis of flower initiation and development in quinoa is limited. Here, we use a computational approach to perform genome-wide identification and analysis of 611 orthologues of the Arabidopsis thaliana flowering genes. Conservation of the genes belonging to the photoperiod, gibberellin and autonomous pathways was observed, while orthologues of the key genes found in the vernalisation pathway (FRI, FLC) were absent from the quinoa genome. Our analysis indicated that on average each Arabidopsis flowering gene has two orthologous copies in quinoa. Several genes including orthologues of MIF1, FT and TSF were identified as homologue-rich genes in quinoa. We also identified 459 quinoa-specific genes uniquely expressed in the flower and/or meristem, with no known orthologues in other species. The genes identified provide a resource and framework for further studies of flowering in quinoa and related species. It will serve as valuable resource for plant biologists, crop physiologists and breeders to facilitate further research and establishment of modern breeding programs for quinoa.

Applications of Transmission Electron Microscopy in the Characterization of Metal Machinability

1968 ◽  
Vol 26 ◽  
pp. 442-443 ◽  
Author(s):  
L.E. Murr ◽  
A.B. Draper
Keyword(s):  
Electron Microscopy ◽  
State Physics ◽  
Test Material ◽  
Milling Machine ◽  
Rotary Table ◽  
Solid State Physics ◽  
Materials Properties ◽  
Transmission Electron ◽  
Selection Of

The industrial characterization of the machinability of metals and alloys has always been a very arbitrarily defined property, subject to the selection of various reference or test materials; and the adoption of rather naive and misleading interpretations and standards. However, it seems reasonable to assume that with the present state of knowledge of materials properties, and the current theories of solid state physics, more basic guidelines for machinability characterization might be established on the basis of the residual machined microstructures. This approach was originally pursued by Draper; and our presentation here will simply reflect an exposition and extension of this research.The technique consists initially in the production of machined chips of a desired test material on a horizontal milling machine with the workpiece (specimen) mounted on a rotary table vice. A single cut of a specified depth is taken from the workpiece (0.25 in. wide) each at a new tool location.

Phytocenotic selection of perennial grasses as a factor of increasing the productivity of mixed agrophytocenoses

2020 ◽  
Author(s):  
V.N. Zolotarev ◽  
◽  
I.S. Ivanov ◽  
O.N. Lyubtseva
Keyword(s):  
Perennial Grasses ◽  
New Varieties ◽  
The Creation ◽  
High Yields ◽  
Selection Of

Based on the analysis of data available in the literature and our own experimental material on phytocenotic selection of the stony stalk (Bromopsis inermis Holub.) the important role of competition between plants in the field for the creation of new varieties of perennial grasses that provide high yields of feed polyvid agrophytocenoses is shown.

Caracterização da Peneira Média em Clones de Coffea canephora

REVISTA FIMCA ◽  
2018 ◽  
Vol 5 (2) ◽  
pp. 28-31
Author(s):  
Darlan Darlan Sanches Barbosa Alves ◽  
Victor Mouzinho Spinelli ◽  
Marcos Santana Moraes ◽  
Carolina Augusto De Souza ◽  
Rodrigo da Silva Ribeiro ◽  
...  
Keyword(s):  
Genetic Improvement ◽  
Block Design ◽  
Coffea Canephora ◽  
Coffee Production ◽  
Randomized Block Design ◽  
Significant Difference ◽  
The Mean ◽  
Four Blocks ◽  
Selection Of

Introdução: O estado de Rondônia se destaca como tradicional produtor de café, sendo o segundo maior produtor brasileiro de C. canephora. No melhoramento genético de C. canephora, a seleção de plantas de elevada peneira média está associada à bebida de qualidade superior. Objetivos: O objetivo desse estudo foi avaliar a variabilidade genética de clones de C. canephora para o tamanho dos grãos, mensurado a partir da avaliação da peneira média (PM). Materiais e Métodos: Para isso, foi conduzido ao longo de dois anos agrícolas experimento no campo experimental da Embrapa no município de Ouro Preto do Oeste-RO, para a avaliação da peneira média de 130 genótipos (clones) com características das variedades botânicas Conilon, Robusta e híbridos intervarietais. O delineamento experimental utilizado foi de blocos ao acaso, com quatro repetições de quatro plantas por parcela. Resultados: Não houve resultados significativos para a interação clones X anos, indicando uma maior consistência no comportamento das plantas ao longo do tempo. Porém foram observadas diferenças significativas para o tamanho dos grãos entre os genótipos avaliados, possibilitando selecionar genótipos superiores. Conclusão: Os genótipos agruparam-se em cinco classes de acordo com o teste de média, subsidiando a caracterização de um gradiente de variabilidade da característica avaliada ABSTRACTIntroduction: Coffea canephora accounts for approximately 35% of the world's coffee production. The state of Rondônia stands out as a traditional coffee producer, being the second largest Brazilian producer of C. canephora. In the classical genetic improvement of C. anephora, the selection of plants of high average sieve is associated with a drink of superior quality. Objectives: The objective of this udy was to evaluate the genetic variability of Coffea canephora clones for the agronomic medium sieve (PM). Materials and Methods: The experiment was conducted in the experimental field of Embrapa, municipality of OuroPreto do Oeste-RO, located at coordinates 10º44'53 "S and 62º12'57". One hundred thirty genotypes (clones) of botanical characteristics Conilon, Robusta and intervarietal hybrids were evaluated in the agricultural years 2013-2014 and 2014-2015. The experimental design was a randomized block design with four blocks and four plants per plot, spacing 3.5 x 1.5 meters between plants. Results: Significant difference was found for the grain size. According to the F test, at 5% probability, the genotypes were grouped into five classes according to the mean test. Conclusion: The results obtained subsidized the characterization of a variability gradient of the evaluated trait.

Effects of water stress on growth and total saponin content of Liriope muscari (Decne.) Bailey*

2012 ◽  
Vol 17 (3) ◽  
pp. 345-349
Author(s):  
Hailan FAN ◽  
Wei HONG ◽  
Chengzhen WU ◽  
Jian LI ◽  
Can CHEN ◽  
...  
Keyword(s):  
Water Stress ◽  
Total Saponin ◽  
Saponin Content

Synthesis and Characterization of a Novel Ionic Liquid Based on N,N,N,N-tetramethylethylenediamine and its Application in the Synthesis of 1,8-dioxo-octahydro Xanthenes

2018 ◽  
Vol 21 (7) ◽  
pp. 526-532 ◽  
Author(s):  
Zahra Abdi Piralghar ◽  
Mohammad Mahmoodi Hashemi ◽  
Ali Ezabadi
Keyword(s):  
Ionic Liquid ◽  
Chlorosulfonic Acid ◽  
Solvent Free ◽  
Aryl Aldehydes ◽  
Acidic Ionic Liquid ◽  
Brønsted Acidic Ionic Liquid ◽  
Solvent Free Conditions ◽  
Aryl Aldehyde ◽  
High Yields

Aim and Objective: In this work, we synthesized and characterized a novel Brönsted acidic ionic liquid from the reaction of N, N, N’, N’-tetramethylethylenediamine with chlorosulfonic acid and explored its catalytic activity in 1, 8-dioxo-octahydroxanthenes synthesis. Materials and Methods: Dimedone, aryl aldehydes, and the ionic liquid as the catalyst were reacted under solvent-free conditions. The progressive of the reaction was monitored by a thin layer of chromatography (ethyl acetate/n-hexane = 1/5). All products were characterized as the basis of their spectra data and melting point by comparison with those reported in the literature. Results: The prepared ionic liquid was successfully applied in the synthesis of 1, 8-dioxooctahydroxanthenes in good to high yields on the reaction of aryl aldehyde and dimedone at 120oC under solvent-free conditions. Conclusion: This research demonstrates that the catalyst is impressive for 1, 8-dioxo-octahydroxanthenes synthesis under solvent-free conditions.

Elaboration and Characterization of the Properties of Refractory Cr Base Alloys

2010 ◽  
Vol 72 ◽  
pp. 46-52 ◽  
Author(s):  
Laurent Royer ◽  
Stéphane Mathieu ◽  
Christophe Liebaut ◽  
Pierre Steinmetz
Keyword(s):  
Mechanical Properties ◽  
Melting Point ◽  
Molten Glass ◽  
Energy Production ◽  
Creep Properties ◽  
Refractory Alloys ◽  
Industrial Use ◽  
Kinetics Of ◽  
Selection Of

For energy production and also for the glass industry, finding new refractory alloys which could permit to increase the process temperatures to 1200°C or more is a permanent challenge. Chromium base alloys can be good candidates, considering the melting point of Cr itself, and also its low corrosion rate in molten glass. Two families of alloys have been studied for this purpose, Cr-Mo-W and Cr-Ta-X alloys (X= Mo, Si..). A finer selection of compositions has been done, to optimize their chemical and mechanical properties. Kinetics of HT oxidation by air, of corrosion by molten glass and also creep properties of several alloys have been measured up to 1250°C. The results obtained with the best alloys (Cr-Ta base) give positive indications as regards the possibility of their industrial use.

scholarly journals Organelle Genetics in Plants

2021 ◽  
Vol 22 (4) ◽  
pp. 2104
Author(s):  
Pedro Robles ◽  
Víctor Quesada
Keyword(s):  
Rna Editing ◽  
Posttranscriptional Regulation ◽  
Genome Engineering ◽  
Plant Mitochondria ◽  
Plastid Dna ◽  
Chloroplast Genomes ◽  
Wide Range ◽  
Organelle Genetics ◽  
Selection Of

Eleven published articles (4 reviews, 7 research papers) are collected in the Special Issue entitled “Organelle Genetics in Plants.” This selection of papers covers a wide range of topics related to chloroplasts and plant mitochondria research: (i) organellar gene expression (OGE) and, more specifically, chloroplast RNA editing in soybean, mitochondria RNA editing, and intron splicing in soybean during nodulation, as well as the study of the roles of transcriptional and posttranscriptional regulation of OGE in plant adaptation to environmental stress; (ii) analysis of the nuclear integrants of mitochondrial DNA (NUMTs) or plastid DNA (NUPTs); (iii) sequencing and characterization of mitochondrial and chloroplast genomes; (iv) recent advances in plastid genome engineering. Here we summarize the main findings of these works, which represent the latest research on the genetics, genomics, and biotechnology of chloroplasts and mitochondria.

scholarly journals Morphometric and Nutritional Characterization of the Main Spanish Lentil Cultivars

Agriculture ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 741
Author(s):  
Javier Plaza ◽  
M. Remedios Morales-Corts ◽  
Rodrigo Pérez-Sánchez ◽  
Isabel Revilla ◽  
Ana M. Vivar-Quintana
Keyword(s):  
Scientific Evidence ◽  
Nutrient Content ◽  
Mediterranean Area ◽  
Western Mediterranean ◽  
Protein Food ◽  
Content Assessment ◽  
Protein Levels ◽  
Nutritional Characteristics ◽  
Clear Differentiation

Nowadays, there is a growing demand for high-quality vegetal protein food products, such as pulses and lentils in particular. However, there is no scientific evidence on the nutritional and morphometric characterization of the main lentil cultivars in the Western Mediterranean area. For this reason, the aim of this work is to carry out a morphometric and nutritional characterization of the main Spanish lentil cultivars. Nutrient content assessment was performed on dry matter. The results showed that all studied cultivars are large and heavy lentils, except for the cultivar “Pardina”. They have high protein levels, ranging from 21% to 25%, which is higher than those found in any other pulse, as well as a high carbohydrate content, greater than 59% in all cases. Fiber content was higher than expected in “Armuña” and “Rubia Castellana” cultivars, ranging from 6% to 6.6%, and exceptionally high in the case of the cultivar “Pardina”, which reached 7.8%. Conversely, very low values were found for fat content, varying between 0.5% and 0.9%. Ca, Fe and Mg levels were remarkably higher (from 550 ppm to 851 ppm, from 98 ppm to 139 ppm and from 790 ppm to 989 ppm, respectively) than those found for other lentil cultivars, especially the high Mg content in the cultivars “Jaspeada” and “Microjaspeada”, both above 955 ppm. Clear differentiation was found between the cultivars “Rubia Castellana”, “Pardina” and those included in the Protected Geographical Indication (PGI) “Lenteja de la Armuña”. Overall, lentil cultivars included in the PGI “Lenteja de la Armuña” showed better morphometric and nutritional characteristics than cultivars “Pardina” or “Rubia Castellana”.

Sign in / Sign up

Export Citation Format

Share Document