Impact of tillage and crop rotation on ascochyta blight (Ascochyta lentis) of lentil

2003 ◽  
Vol 83 (2) ◽  
pp. 411-415 ◽  
Author(s):  
B. D. Gossen ◽  
D. A. Derksen
Keyword(s):  
Crop Rotation ◽  
Seed Quality ◽  
Block Design ◽  
Ascochyta Blight ◽  
Conventional Tillage ◽  
Crop Species ◽  
Ascochyta Lentis ◽  
Main Plot ◽  
The Impact ◽  
Rotation Study

Two trials were conducted from 1996 to 1999; one at Indian Head, SK, to examine the impact of tillage management on the severity of ascochyta blight of lentil, caused by Ascochyta lentis (teleomorph Didymella lentis), and a second at Saskatoon, SK, to assess the impact of crop rotation. In 1995, the blight-susceptible lentil cv. Eston was seeded across both sites and later inoculated with blight-infested lentil residue to provide a uniform level of infection. Treatments were initiated in the spring of 1996. Ascochyta blight severity was assessed on each lentil plot during the growing season. Seed quality and yield were assessed each year. A split-block design was used to minimize movement of inoculum among plots over years. In the tillage management trial at Indian Head, the main plot treatments were 0, 1, or 2 yr between lentil crops, with spring wheat as the alternate crop; the subplot treatments were zero-till vs. conventional tillage. Ascochyta blight severity was substantially higher under zero-till than under conventional tillage in the continuous lentil treatment when conditions were conducive to blight development. However, tillage management had little effect on severity when there were 2 yr between successive lentil crops. We conclude that tillage management is unlikely to have an important impact on blight severity, except in rotations with short re-cropping intervals. In the crop rotation study at Saskatoon, the main plot treatments were two rotation sequences and the subplot treatments were three crop species (canola, barley, pea) planted in 1996. Rotation 1 was seeded to cv. Eston in 1997 and barley in 1998; Rotation 2 was seeded to barley in 1997 and cv. Eston in 1998. Both rotations were seeded to cv. Eston in 1999. Also, a plot seeded continuously to cv. Eston was included at one end of each replicate block as a control. Blight was more severe in continuous lentil than in the other crop rotations, and ascochyta blight levels in 1999 were lowest where barley followed the 1996 lentil crop for both Rotation 1 and 2. However, the intervening nonhost crop had little impact on seed infection or seed yield. We conclude that at least two nonhost crops between successive lentil crops are required to substantially reduce inoculum of A. lentis following a disease outbreak. Key words: Didymella lentis, zero-till management, fusarium root rot, Lens culinaris, barley, canola, field pea

Harvesting and Threshing Methods on Seed Quality of Dhaincha (Sesbania aculeata)

2021 ◽  
Author(s):  
P. Masilamani ◽  
T. Eevera ◽  
T. Ramesh ◽  
S. Venkatesan
Keyword(s):  
Tamil Nadu ◽  
Seed Quality ◽  
Block Design ◽  
Mechanical Damage ◽  
Shoot Length ◽  
Seedling Vigour ◽  
Root And Shoot Length ◽  
Significant Difference ◽  
Combine Harvester ◽  
The Impact

Background: The present investigation is an attempt to study the effect of different harvesting and threshing methods on germination and seedling vigour of dhaincha. The use of a combine harvester to harvest dhaincha will be an effective alternative method that has not been widely tried. However, work on different methods of harvesting and threshing of dhaincha is limited. Hence, a study was conducted to evaluate the impact of various harvesting and threshing methods on germination and seedling vigour of dhaincha. Methods: This study was conducted at Anbil Dharmalingam Agricultural College and Research Institute, TNAU, Tiruchirappalli, Tamil Nadu. The dhaincha crop was harvested and threshed using four different methods viz., manual harvesting and manual threshing, manual harvesting and threshing by tractor treading, manual harvesting and mechanical threshing and harvesting and threshing by combine harvester. The resultant seeds were tested for mechanical damage and germination potential. The experiment was laid in completely randomized block design. Germination was tested by roll towel method using 100 seeds in four replications. Germination percentage, root and shoot length were measured in seven days after sowing from ten randomly selected seedlings in each replication. For the estimation of dry matter production, ten seedlings were selected at random and kept in a hot air oven maintained at 85oC for 24 hours after measuring their root and shoot length and vigour index was calculated. Mechanical damage to seeds was observed by ferric chloride test. Seed recovery per cent was calculated based on the 100 kgs of dhaincha seeds were cleaned and graded treatment wise using cleaner cum grader and the seeds retained on the bottom sieve were weighed and expressed as per cent of total quantity of seed. Result: The results revealed that the significant difference was found among the different harvesting and threshing methods. The seeds harvested and threshed by manual method recorded 85 per cent germination followed by seeds harvested manually and threshed by mechanical threshing (84 per cent) and seeds harvested manually and threshed by tractor treading (80.5 per cent). The lowest germination of 80.0 per cent was recorded by combine harvesting. From this study, it could be inferred that combine harvester is a modern method for harvesting of dhaincha that saves time and labour when compared to all other methods.

scholarly journals Pengembangan Metode Pengusangan Cepat Fisik Benih Pepaya (Carica papaya L.)

2019 ◽  
Vol 2 (3) ◽  
pp. 7
Author(s):  
Dyah Priandini ◽  
Muhamad Rahmad Suhartanto ◽  
Abdul Qadir
Keyword(s):  
Moisture Content ◽  
Aging Time ◽  
Seed Quality ◽  
Block Design ◽  
Accelerated Aging ◽  
Seed Moisture Content ◽  
Accelerated Aging Test ◽  
Aging Test ◽  
The Impact ◽  
Papaya Seed

Development of papaya fruit production is influenced by the availability of seed quality. High seed quality is maintained during seed storage. Estimation of vigor in relation to storability can be detected by accelerated aging test. This research aims to develop physicall accelerated aging test by, 1)determine the impact of physical accelerated aging on vigor and viability parameters on papaya seed variety Callina and Sukma, 2) determine the levels of seed moisture content and effective period of physicall accelerated aging to predict vigor of papaya seed. This research was conducted at the Laboratory of Seed Science and Technology and Green House Leuwikopo, Department of Agronomy and Horticulture, IPB in January-May 2016 using a randomized complete block design with three replications. Seeds aged by the aging equipment MPC IPB 77-1 MMM. The results showed that the aging time decreased germination value in papaya seed variety Callina and Sukma with equation y=-0.1389x3+3.3333x2–25.25x+81.5 and y=0.0171x3+0.2028x2-9.9956x+81.095. Effective imbibition is 96 hour with moisture content 63-70% in both varieties. The effective of aging time treatment at 0x4, 1x4, 2x4, 3x4, dan 4x4 minutes.Keywords:imbibition, moisture content, viability, vigor

scholarly journals Interactive effects of rice bran compost and chemical fertilizers on macronutrients, oil and protein content in sunflower (Helianthus annuus L.)

2021 ◽  
Vol 10 (2) ◽  
pp. 91-99
Author(s):  
M Alauddin ◽  
GM Mohsin ◽  
AHMZ Ali ◽  
MK Rahman
Keyword(s):  
Protein Content ◽  
Rice Bran ◽  
Seed Quality ◽  
Block Design ◽  
Interactive Effects ◽  
Control Treatment ◽  
Chemical Fertilizers ◽  
Uptake Pattern ◽  
The Impact

A field experiment was conducted at the research farm of Charfasson Govt. College, Bhola, Bangladesh in rabi season in 2015-2016 to evaluate the impact of conjunctive use of chemical fertilizers with rice bran on concentration, uptake and seed quality of sunflower cv. BARI-2 (Keroni-2). The experiment was laid out in the randomized complete block design (RCBD) having sixteen treatments with three replications. The size of the plots were 3 m x 2 m. Treatments were T1 Control (- RB and -NPK), T2: 2.5 t RB ha-1, T3: 5.0 t RB ha-1,T4: 7.5 t RB ha-1, T5: N40P30K50 kg ha-1,T6: N80P60K100 kg ha-1, T7: N120P90K150 kg ha-1, T8: 2.5 t RB ha-1 + N40P30K50 kg ha-1, T9: 2.5 t RB ha-1 + N80P60K100 kg ha-1, T10: 2.5 t RB ha-1 + N120P90K150 kg ha-1, T11: 5.0 t RB ha-1 + N40P30K50 kg ha-1, T12: 5.0 t RB ha-1 + N80P60K100 kg ha-1, T13: 5.0 t RB ha-1 + N120P90K150 kg ha-1, T14: 7.5 t RB ha-1 + N40P30K50 kg ha-1, T15: 7.5 t RB ha-1 + N80P60K100 kg ha-1, T16: 7.5 t RB ha-1 + N120P90K150 kg ha-1. Results showed that the concentration, uptake and quality of seeds (oil and protein) of the crop increased with increasing rate of the amendments significantly (P<0.05) over the control and the variation between the treatments were also significant irrespective of the sources of amendments in most of the cases. Generally, combination of the treatments showed better performance than their individual application. Maximum values of NPKS concentration (%) in different organs of sunflower were 1.22, 0.35, 1.90, 0.18 for stem; 1.17, 0.35, 2.41, 0.16 for root; 3.98, 0.43, 4.28, 0.24 for leaf, 1.04, 0.65, 3.00, 0.22 for petiole; 2.16, 0.58, 2.21, 0.26 for inflorescence and 5.24, 0.83, 1.60, 0.47 for seed measured in treatments 5.0 t RB ha-1 + N120P90K150 kg ha-1 and 7.5 t RB ha-1 + N120P90K150 kg ha-1 in most of the cases. However, their uptake pattern also followed the same trend as in concentration and the highest values were found in those treatments in most of the cases. Significantly (P<0.05%) the highest content of oil (51.1%) in seed was measured in the treatment 5.0 t RB ha-1 + N120P90K150 kg ha-1 and protein (33.9%) was found in the treatment 5.0 t RB ha-1 +N80P60K100 kg ha-1. Their lowest values were found in control for oil and in 2.5 t RB ha-1 for protein, which was lower than control treatment. The overall findings of this study indicated that rice bran in combination with chemical fertilizers could be applied to achieve better concentration and uptake in different organs, oil and protein content in seeds of sunflower. Int. J. Agril. Res. Innov. Tech. 10(2): 91-99, December 2020

scholarly journals Adaptability of lettuce cultivars to planting in no-tillage on straw of Urochloa ruziziensis

2018 ◽  
Vol 53 (7) ◽  
pp. 824-832
Author(s):  
Andréia Cristina Silva Hirata ◽  
Edson Kiyoharu Hirata ◽  
João Augusto Rizzo Camara
Keyword(s):  
Soil Temperature ◽  
Block Design ◽  
Soil Management ◽  
Conventional Tillage ◽  
No Tillage ◽  
Lower Yield ◽  
The Third ◽  
Randomized Complete Block Design ◽  
Main Plot ◽  
Similar Yield

Abstract: The objective of this work was to evaluate the adaptability of different lettuce (Lactuca sativa) cultivars grown in no-tillage on straw of ruzi grass (Urochloa ruziziensis), as well as its effects on soil temperature and weed control, in successive cultivations in the summer. The treatments were carried out in a randomized complete block design, with four replicates, in a split-plot arrangement (2x4), in which soil management (no-tillage on ruzi grass and convention tillage) was the main plot, and the different crisphead lettuce cultivars (Amanda, Solaris, Vanda, and Vera), the subplots. No difference was observed between cultivars for soil management. No-tillage reduced the soil temperature by up to 3.7°C and weed density by 3.7 times, in comparison with conventional tillage. Ruzi grass promoted a greater bed conservation. In comparison to with conventional tillage, the no-tillage management of lettuce cultivated on ruzi grass straw resulted in a lower yield in the first crop due to excess straw; in a similar yield in the second crop; and in a greater yield in the third crop. Lettuce cultivated on ruzi grass straw in no-tillage management results in a greater sustainability, in comparison with conventional tillage, in three successive plantings.

scholarly journals Drought Stress in Cereals – A Review

2021 ◽  
Vol 67 (2) ◽  
pp. 47-60
Author(s):  
Michaela Havrlentová ◽  
Ján Kraic ◽  
Veronika Gregusová ◽  
Bernadett Kovácsová
Keyword(s):  
Water Availability ◽  
Thermal Stresses ◽  
Seed Quality ◽  
Current Knowledge ◽  
Arable Land ◽  
Plant Morphology ◽  
Food Sources ◽  
Crop Species ◽  
Sustainable Solutions ◽  
The Impact

Abstract Drought is one of the most important factors that influences plant morphology, biochemistry, and physiology, and finally leads to the decline in crops productivity and seed quality. Climate change, severe changes in water availability together with thermal stresses environment coincide with increasing human population, and to reveal sustainable solutions it is necessary to understand: i) how cereals react to drought, ii) how the tolerance mechanisms are exhibited by the genotype, and iii) which approaches enable to increase the tolerance of crop species against limited water availability. Especially in cereals as in high-quality food sources, it is important to reveal the adaptation mechanisms to rainfall dynamics on arable land and to the prolonged period of drought. This review summarizes current knowledge on the impact of drought on cereals, the mechanisms these crops utilize to cope water scarcity and survive, and the most efficient approaches to improve their drought tolerance.

scholarly journals Comparison of the effects of two laser photobiomodulation techniques on bio-physical properties of Zea mays L. seeds

PeerJ ◽  
2021 ◽  
Vol 9 ◽  
pp. e10614
Author(s):  
Mohammed Hasan ◽  
Marlia M. Hanafiah ◽  
Intsar H.H. Alhilfy ◽  
Ziad Aeyad Taha
Keyword(s):  
Laser Treatment ◽  
Seedling Growth ◽  
Yttrium Aluminum Garnet ◽  
Seed Quality ◽  
Block Design ◽  
Green Laser ◽  
Control Group ◽  
Maize Seeds ◽  
Field Emergence ◽  
The Impact

Background Laser applications in agriculture have recently gained much interest due to improved plant characteristics following laser treatment before the sowing of seeds. In this study, maize seeds were exposed to different levels of laser treatment prior to sowing to improve their field performance. The aim of this study is to evaluate the impact of pre-sowing laser photobiomodulation on the field emergence and growth of treated maize seeds. Methods The maize seeds were first photobiomodulated with two lasers: 1) a helium-neon (He–Ne) red laser (632.8 nm), and 2) a neodymium-doped yttrium aluminum garnet (Nd:YAG) green laser (532 nm). Following three replications of randomized complete block design (RCBD), four irradiation treatments were applied (45 s, 65 s, 85 s, and 105 s) at two power intensities (2 mW/cm2 and 4 mW/cm2). Results Based on the results, maize seeds pretreated with a green laser and 2 mW/cm2 power intensity for 105 s exhibited the highest rate of seed emergence (96%) compared to the untreated control seeds with a lower seed emergence rate (62.5%). Furthermore, maize seeds treated with a red laser for 45 s showed an increased vigor index compared to the other treatment options and the control (P < 0.01). The treatment groups also showed statistically significant differences in seedling growth characteristics compared to the control group p < 0.01. The green laser produced a significant enhancement of about 24.20 cm in seedling length, 8.2 leaves/plant, and 3.4 cm in stem diameter compared to the untreated seeds. Moreover, the green laser treatment showed 57.4 days to anthesis, which was earlier than the untreated seeds (61.4 days). The results showed that the protein, oil, and starch contents of the seeds irradiated with the green laser were 17.54%, 6.18%, and 73.32%, respectively, compared to the seeds irradiated by the red laser with 16.51%, 6.33%, and 71.05%, respectively. Conclusions The photo biomodulation of maize seeds using a green laser light can improve the field emergence, seedling growth, and seed quality of the treated seed compared to the red laser treatment.

Optimizing the Seed Rate for Maximized Yield And Benefits of Wheat Under Strip Tillage In Bangladesh

2021 ◽  
Vol 19 (1) ◽  
pp. 45-56
Author(s):  
M Begum ◽  
R Hasan ◽  
MM Hossain
Keyword(s):  
Block Design ◽  
Conventional Tillage ◽  
Seed Rate ◽  
Economic Profit ◽  
Highest Weight ◽  
Randomized Complete Block Design ◽  
Strip Tillage ◽  
On Farm ◽  
The Impact ◽  
Herbicide Glyphosate

An on-farm experiment was conducted at the farmer's field located at the Durbachara village of Gauriopur upazilla under the Mymensingh district of Bangladesh from November 2015 to March 2016 to study the effect of seed rate on yield performance of wheat under strip tillage. Wheat cv. BARI Gom-26 was sown under conventional tillage (CT) vs. strip tillage (ST), including four seeding rates viz. 100, 110, 120, and 130 kg ha-1. The CT was done with a two-wheel tractor and consisted of two primary tillages followed by two secondary tillages. The ST was done using a Versatile Multi-crop Planter (VMP) machine in a single pass process. A pre-plant herbicide, glyphosate was applied 3 days before of ST operation @ 3.7 L ha-1. The experiment was laid out in a randomized complete block design with four replications. The impact of tillage methods on the seed rate was found significant in the yield and economic profit of wheat. The longest spike with the highest number of grains spike-1, the highest weight of 1000-grain, grain yield, and BCR was recorded when 120 kg seeds of wheat sown with strip tillage. This practice produced a 25% higher yield and earned 51% higher profit than the practice of seeding 100 kg seeds ha-1 with conventional tillage. SAARC J. Agric., 19(1): 45-56 (2021)

scholarly journals Weed Community in a Raw Sugarcane Renovation Area Submitted to Different Soil Managements

2016 ◽  
Vol 34 (1) ◽  
pp. 91-98 ◽  
Author(s):  
M.B.B. SOARES ◽  
S. BIANCO ◽  
E.L. FINOTO ◽  
D. BOLONHEZI ◽  
J.A.A. ALBUQUERQUE ◽  
...  
Keyword(s):  
Crop Rotation ◽  
Soil Conservation ◽  
Conservation Tillage ◽  
Cropping Systems ◽  
Block Design ◽  
Conventional Tillage ◽  
Cyperus Rotundus ◽  
Weed Species ◽  
Randomized Block Design ◽  
Dry Biomass

The objective of this study was to evaluate the weed community in a raw sugarcane renovation area with three soil managements and peanut sowing in succession. The experiment was conducted during the 2007/08 season on a raw sugarcane area harvested without prior burning in the last five cuts. A randomized block design with treatments arranged in a split plot and arranged in four replications was used. The main treatments consisted of three cropping systems: conventional tillage, minimum tillage and direct planting, and subplots consisted in the absence (resting) or presence of crop rotation with peanuts. After 135 days from planting peanuts and 180 days of sugarcane harvest, the number of weeds m-2 was counted and the shoot dry biomass of the weeds collected was determined. The data were interpreted by analysis of variance and the means were compared by Tukey's test at 5% probability so that phytosociological indices a, b, c e d were calculated. The use of soil conservation tillage and peanut in rotation with sugarcane in the renovation areas is effective in controlling weeds and suppression of weed species difficult to control like Cyperus rotundus, Commelina bengalensis, Urochloa plantaginea, and Digitaria nuda.

Nutrient status and crop productivity following a 14-year irrigated potato rotation study

2015 ◽  
Vol 95 (2) ◽  
pp. 351-360 ◽  
Author(s):  
R. Mohr ◽  
A. Nelson ◽  
D. Tomasiewicz ◽  
D. McLaren ◽  
M. Monreal ◽  
...  
Keyword(s):  
Block Design ◽  
Soil Nutrient ◽  
Nutrient Status ◽  
Crop Productivity ◽  
Soybean Yield ◽  
Nutrient Levels ◽  
Potato Rotation ◽  
The Impact ◽  
Rotation Study ◽  
Cu And Zn

Mohr, R., Nelson, A., Tomasiewicz, D., McLaren, D., Monreal, M., Irvine, B., Khakbazan, M., Moulin, A., Derksen, D. and Volkmar, K. 2015. Nutrient status and crop productivity following a 14-year irrigated potato rotation study. Can. J. Plant Sci. 95: 351–360. Well-managed crop rotations contribute to high productivity and quality in subsequent crops, and neither excessively deplete nor increase soil nutrient levels. A field experiment was conducted in the year following completion of a 14-yr irrigated potato (Solanum tuberosum L.) rotation study to assess the impact of preceding rotation on soil P, K and micronutrient concentrations, and on soybean (Glycine max) productivity, yield and seed nutrient levels. Soybean was grown on six established rotations [potato with canola (PC), wheat (PW), canola–wheat (PCW), oat-wheat (POW), wheat–canola–wheat (PWCW), and canola underseeded to alfalfa–alfalfa–alfalfa (PCAA)] arranged in a randomized complete block design (RCBD) with four replicates. Soil nutrient levels fell within ranges typical of the region, as did soybean yield and quality. Lower P and K concentrations in spring soil samples, and in soybean seeds, were typically associated with PCAA, suggesting that fertilizer additions did not account for high rates of P and K removal by alfalfa hay in this rotation. While preceding rotation had minimal effects on soil Cu and Zn, soybean established after PCAA or after potato contained comparatively higher seed Cu and Zn concentrations suggesting that including mycorrhizal crops such as potato and alfalfa in rotation may have contributed to enhanced micronutrient availability. Soybean yield was 4–6% higher following potato than canola or cereals, and 6% higher following POW than PCW. Seed protein increased and oil concentration decreased where preceding rotations included alfalfa. The limited yield differences observed may have been due, in part, to the selection of soybean as an indicator crop, which likely minimized differences among rotations arising from disease, weeds and nitrogen. These findings suggest that, with careful management of irrigated potato systems over the longer term, crop productivity and nutrient availability may be maintained within acceptable levels for agricultural production.

scholarly journals Influence of Curly Leaf Trait on Cottonseed Micro-Nutrient Status in Cotton (Gossypium hirsutum L.) Lines

Plants ◽  
2021 ◽  
Vol 10 (8) ◽  
pp. 1701
Author(s):  
Nacer Bellaloui ◽  
Rickie B. Turley ◽  
Salliana R. Stetina
Keyword(s):  
Seed Quality ◽  
Plant Traits ◽  
Block Design ◽  
Leaf Shape ◽  
Wild Type ◽  
Leaf Trait ◽  
Nutritional Qualities ◽  
Positive Correlations ◽  
The Impact ◽  
Curly Leaf

Cottonseed is a source of nutrients, including protein, oil, and macro- and micro-nutrients. Micro-nutrients such as boron (B), copper (Cu), iron (Fe), manganese (Mn), and zinc (Zn) are essential for plant and human health. Deficiencies of these micro-nutrients in soil lead to poor crop production and poor seed quality. Micro-nutrient deficiencies in the human diet lead to malnutrition and serious health issues. Therefore, identifying new cotton lines containing high nutritional qualities such as micro-nutrients, and understanding plant traits influencing micro-nutrients are essential. The objective of this research was to investigate the effects of leaf shape (curly leaf: CRL) on cottonseed B, Cu, Fe, Mn, Ni (nickel), and Zn in two near-isogenic cotton lines differing in leaf shape (DP 5690 wild-type with normal leaves and DP 5690 CRL). We also used Uzbek CRL, the source of the curly leaf trait, for comparison. A field experiment was conducted in 2014 and 2015 in Stoneville, MS, USA. The experiment was a randomized complete block design with three replicates. The results showed that, in 2014, both DP 5690 wild-type and Uzbek CRL had higher seed B, Cu, Fe, and Ni than in DP 5690 CRL. The accumulation of Mn and Zn in seeds of DP 5690 CRL was higher than in DP 5690 wild-type and Uzbek CRL. However, in 2015, the concentrations of B, Cu, Fe, and Ni, including Mn and Zn, were higher in both DP 5690 wild-type and Uzbek CRL than in DP 5690 CRL. Positive and negative correlations existed in 2014; however, only positive correlations existed between all nutrients in 2015. This research demonstrated that leaf shape can alter cottonseed micro-nutrients status. As Uzbek CRL behaved similar to wild-type, both leaf shape and other factors contributed to the alteration in seed micronutrients, affecting seed nutritional qualities. Therefore, leaf-shape partially contributed to the changes in micro-nutrients in cottonseed. The negative and positive correlations in 2014, and only positive correlations in 2015, were likely due to the heat difference between 2014 and 2015 as 2015 was warmer than 2014. Significant levels of seed micro-nutrients were shown between these lines, providing opportunities for breeders to select for high seed micro-nutrients in cotton. Additionally, the current research provides researchers with physiological information on the impact of leaf shape on seed nutritional quality. The leaf shape trait can also be used as a tool to study leaf development, physiological, biochemical, and morphological processes.

Sign in / Sign up

Export Citation Format

Share Document