Relationship between soybean seed selenium and harvested grain selenium

1999 ◽  
Vol 79 (1) ◽  
pp. 221-223 ◽  
Author(s):  
Umesh C. Gupta ◽  
J. A. MacLeod
Keyword(s):  
Prince Edward Island ◽  
Field Experiments ◽  
Sandy Loam ◽  
Soybean Seed ◽  
Selenium Concentration ◽  
Soybean Crop ◽  
Se Deficiency ◽  
Deficiency Diseases ◽  
The Relationship ◽  
Podzol Soils

Field experiments were conducted on sandy loam soils in Prince Edward Island (PEI) with two cultivars of soybeans at two locations to determine the relationship between Se concentration in the seed sown and the Se concentration found in the harvested soybean crop. Seeds containing a range of Se from 0.78 to 38.5 mg kg−1 were used. These variable concentrations of seed Se were obtained in field experiments by varying the rates of seed and foliar applied Se. Grain Se concentration increased with increased Se concentration in the planted seed. A high proportion of the variation in Se concentration in the harvested soybean crop was explained by variation in the Se content of the planted seed (R2 = 0.98). The regression was calculated using averages of cultivars for both locations. From the regression equation it could be predicted that planting seed containing 24 mg Se kg−1 would produce a soybean crop containing 0.5 mg Se kg−1. When used at 200 kg soybean per tonne ration this would provide a Se concentration of 0.1 mg kg−1 assuming negligible contributions from other ingredients. Selenium concentration of 0.1 mg kg−1 in animal ration is considered adequate to protect livestock from Se deficiency diseases. Key words: Podzol soils, seed-applied Se, grain Se

Effect of various sources of selenium fertilization on the selenium concentration of feed crops

1994 ◽  
Vol 74 (3) ◽  
pp. 285-290 ◽  
Author(s):  
Umesh C. Gupta ◽  
J. A. MacLeod
Keyword(s):  
Prince Edward Island ◽  
Foliar Spray ◽  
Selenium Concentration ◽  
Sodium Selenate ◽  
First Year ◽  
Whole Plant ◽  
Se Deficiency ◽  
Second Year ◽  
Deficiency Diseases ◽  
Feed Crop

This study was conducted in Prince Edward Island (PEI) Canada to determine the effect of various sources of selenium (Se) (i) sodium selenate (ii) selcote (iii) selcote 2 year and (iv) lime coated Se-granules on the Se concentration in cereals, forages and soybeans. All sources were applied to the soil at 10 g Se ha−1. For soybeans, sodium selenate was also applied as a foliar spray. All sources, in the year of application, proved effective in raising the feed crop Se to more than 100 μg Se kg−1, the minimum level required to prevent Se deficiency diseases in livestock. Lime coated Se granules resulted in much lower Se in all crops than other Se sources. Selenium concentration in soybean grain was higher than in cereals and forages treated with Se. Selenium concentration in soybean grain was higher following foliar applications of sodium selenate (3005 μg kg−1) than following soil application (1930 μg kg−1). Experiments conducted at a second location produced similar results. In most cases, soybean grain contained higher Se than either the whole plant or leaves. Selcote resulted in significantly higher Se, during the first year in soybean and forages, than selcote 2 year. This relationship was not consistent on cereals. Selenium concentrations in the second year crop of soybeans were below the minimum required level of 100 μg kg−1 needed to prevent Se deficiency in livestock for all Se sources except for the selcote 2 year source. Only the latter Se source resulted in a Se concentration of > 100 μg kg−1 for 2 yr. Soybeans fertilized with Se should prove to be an excellent feed crop for enriching grain with Se. Key words: Podzol soils, selcote, sodium selenate, barley, oat, forages, soybeans, crop Se

Effect of selenium seed treatment on selenium concentrations in soybeans

1995 ◽  
Vol 75 (3) ◽  
pp. 287-291 ◽  
Author(s):  
J. A. MacLeod ◽  
Umesh C. Gupta
Keyword(s):  
Prince Edward Island ◽  
Seed Treatment ◽  
Dry Matter ◽  
Sandy Loam ◽  
Foliar Spray ◽  
Soybean Seed ◽  
Eastern Canada ◽  
Dietary Concentration ◽  
Treated Seed ◽  
Se Status

This study was conducted in Prince Edward Island (PEI), Canada, to determine the effect selenium (Se) treated seed on Se concentrations in soybean seed (Glycine max). Seed Se concentrations were also compared to those obtained with foliar applied Se. An application of 10 g Se ha−1 as seed treatment raised soybean Se concentrations to more than 0.5 mg kg−1. Soybeans with these Se concentrations, when included in rations at 200 kg t−1 with other low Se ingredients, would produce rations exceeding 0.1 mg Se kg−1, i.e., the minimum level required to prevent Se deficiency in livestock. Seed treatment with 100 g Se ha−1 produced soybean Se concentrations greater than 10 mg Se kg−1. When included in rations at 200 kg t−1 with other low Se feed sources, soybeans with such Se levels would produce rations in excess of the maximum tolerable dietary concentration of 2 mg Se kg−1 dry matter. Even higher soybean Se concentrations were obtained from equivalent Se rates when applied as foliar spray. In summary, treatment of soybean seed with Se has a potential for improving the Se status of rations that would be formulated with ingredients originating from Se deficient areas. Key words: Foliar applied Se, seed Se, sandy loam, Eastern Canada

Simulation on Extrusion Comminution Model of Roller Press

2010 ◽  
Vol 156-157 ◽  
pp. 1702-1707
Author(s):  
Xiang Wen Cheng ◽  
Jinchao Liu ◽  
Qi Zhi Ding ◽  
Li Ming Song ◽  
Zhan Lin Wang
Keyword(s):  
Experimental Data ◽  
Particle Size ◽  
Field Experiments ◽  
Size Ratio ◽  
Optimum Operating ◽  
Extrusion Force ◽  
Particle Size Ratio ◽  
Small Constant ◽  
Working Parameters ◽  
The Relationship

How to predict the relationship among particle size and among product size, to establish the relationship between the granularity and working parameters in the process of grinding and to determine the optimum operating parameters. With proposing BS squeeze crush model by L. Bass and the idea of roll surface division as the material uneven extrusion force are adopted. Based on field experiments the experimental data is analyzed, the select function and the breakage functions are fitted with MATLAB software, and obtaining their model. The comminution model is determined by the roller division. We obtain the model parameter through the experimental data. Through model analysis shows: the relationship between particle breakage and energy absorption, namely the smaller size of the same power, the lower broken; the breakage diminishes with the decrease of particle size ratio and it will be tending to a small constant when the smaller particle size ratio. The breakage functions rapidly decrease within ratio of between 0.2-0.7. This shows: the energy consumption will rapidly increase when the particle size of less than 0.2 in broken; the selection diminish with the decrease of particle size. Pressure (8-9MPa) should be the most appropriate value.

Yields of Sub-humid Rainfed Crops in Relation to Soil Water Retention and Cropping Sequence

1978 ◽  
Vol 14 (3) ◽  
pp. 253-259 ◽  
Author(s):  
H. N. Verma ◽  
S. S. Prihar ◽  
Ranjodh Singh ◽  
Nathu Singh
Keyword(s):  
Water Retention ◽  
Field Experiments ◽  
Sandy Loam ◽  
Sandy Loam Soil ◽  
Yield Response ◽  
Soil Water Retention ◽  
Cropping Sequence ◽  
Loam Soil ◽  
Rabi Crops ◽  
Water Holding

SUMMARYField experiments were conducted for 4 years to study the yield of ‘kharif’ and ‘rabi’ crops grown in sequence on two soils differing in water-holding capacity. The results indicated that drought caused greater reduction in yield of rainy-season crops on loamy sand than on sandy loam soil. In low retentivity soil it was more profitable to raise a single crop of wheat on soil-stored water. In sandy loam soil of higher retentivity, two crops a year gave much higher yields than a single crop. Of the sequences tried, maize followed by wheat gave the highest and most stable yields. For ‘rabi’ crops, stored water showed a better yield response than an equivalent amount of rain during the growing season.

THE EFFECT OF ANTECEDENT FREEZE-THAW FREQUENCY ON RUNOFF AND SOIL LOSS FROM FROZEN SOIL WITH AND WITHOUT SUBSOIL COMPACTION AND GROUND COVER

1989 ◽  
Vol 69 (4) ◽  
pp. 799-811 ◽  
Author(s):  
LINNELL M. EDWARDS ◽  
J. R. BURNEY
Keyword(s):  
Prince Edward Island ◽  
Sandy Loam ◽  
Bare Soil ◽  
Winter Rye ◽  
Rainfall Simulator ◽  
Fine Sandy Loam ◽  
Freeze Thaw ◽  
Sediment Loss ◽  
Freezing Period ◽  
Subsoil Compaction

Three soils from Prince Edward Island (a loam, a fine sandy loam, and a sandy loam) were tested under a laboratory rainfall simulator to examine the effects of frequency of freezing and thawing, winter rye cover, incorporated cereal residue, and subsoil compaction on runoff volume and sediment loss. Wooden soil boxes were subjected to simulated rain (i) at the end of a 10-d freezing period, and (ii) at the end of the 5th 24-h freezing period of a 10-d alternating freeze-thaw cycle (freeze/thaw). Where the soil was continuously frozen for 10 d, there was 178% greater sediment loss and 160% greater runoff than with daily freeze/thaw over the same period, but there was no difference in sediment concentration. Incorporated cereal residue decreased sediment loss to 50% and runoff to 77% of that from bare soil. Winter rye cover decreased sediment loss to 73% of that from bare soil. Simulated soil compaction caused a 45% increase in sediment loss. The loam soil showed 16.5% greater loss of fine sediment fractions <0.075 mm than the fine sandy loam which showed 23.4% greater loss than the sandy loam. Key words: Freeze-thaw, erosion, compaction, winter rye, cereal residue, rainfall simulator, Prince Edward Island soils

Effect of nitrogen, phosphorus and potassium application on yield of potato tubers (Solatium tuberosum L.)

1987 ◽  
Vol 108 (2) ◽  
pp. 321-329 ◽  
Author(s):  
U. C. Sharma ◽  
B. R. Arora
Keyword(s):  
Field Experiments ◽  
Sandy Loam ◽  
Farmyard Manure ◽  
Potato Tubers ◽  
Solatium Tuberosum ◽  
Loam Soil ◽  
Potassium Application ◽  
Phosphorus And Potassium ◽  
Grade Increase ◽  
Nitrogen Phosphorus

SummarySix field experiments, three each during 1982–3 and 1983–4, were conducted on a sandy loam soil to study the effect of varying levels of nitrogen, phosphorus and potassium, in the absence and presence of farmyard manure (FYM) (30 t/ha), on the number of tubers and yield of potato in three grades. Increase in nitrogen, phosphorus and potassium application, in the absence or presence of FYM, did not significantly affect the total number of tubers/m2 but did affect the number of tubers in different grades. An increase in nitrogen and potassium significantly decreased the number of tubers/m2 in small (< 25 g) and increased in medium (25–75 g) and large (> 75 g) grades at 45, 60, 75 and 90 days after planting. Increase in the application of phosphorus increased the number of tubers/m2 in the small grade and decreased it in the large grade but did not affect the number in the medium grade. Increase in nitrogen and potassium application decreased the tuber yield in the small grade and increased it in the medium and large grades. Applied phosphorus increased the yield in the small and medium grades and decreased it in the large grade. The increase in the yield of tubers with increase in nitrogen and potassium application was found to be caused by an increase in the number of tubers in the medium and large grades at the expense of the small grade; however, with applied phosphorus the increase in yield was due to increase in the weight of individual tubers within the small and medium grades. FYM application decreased the number of tubers in the small grade and increased it in the medium and large grades. The response of potato to nitrogen increased and to phosphorus and potassium decreased with the application of FYM.

scholarly journals Interactions Between Chill-Hours and Degree-Days Affect Carpogenic Germination in Monilinia vaccinii-corymbosi

2001 ◽  
Vol 91 (1) ◽  
pp. 77-83 ◽  
Author(s):  
H. Scherm ◽  
A. T. Savelle ◽  
P. L. Pusey
Keyword(s):  
Laboratory Experiments ◽  
Field Experiments ◽  
Degree Days ◽  
Carpogenic Germination ◽  
Conditioning Period ◽  
Low Degree ◽  
Heating Degree Days ◽  
Relationship Of ◽  
High Degree ◽  
The Relationship

The relationship of cumulative chill-hours (hours with a mean temperature <7.2°C) and heating degree-days (base 7.2°C) to carpogenic germination of pseudosclerotia of Monilinia vaccinii-corymbosi, which causes mummy berry disease of blueberry, was investigated. In two laboratory experiments, pseudosclerotia collected from rabbiteye blueberry in Georgia were conditioned at 5 to 6°C for 26 to 1,378 h prior to placement in conditions favorable for germination and apothecium development. The number of chill-hours accumulated during the conditioning period affected the subsequent proportion of pseudosclerotia that germinated and produced apothecia, with the greatest incidence of carpogenic germination occurring after intermediate levels of chilling (≈700 chill-hours). The minimum chilling requirement for germination and apothecium production was considerably lower than that reported previously for pseudo-sclerotia from highbush blueberry in northern production regions. The rate of carpogenic germination was strongly affected by interactions between the accumulation of chill-hours and degree-days during the conditioning and germination periods; pseudosclerotia exposed to prolonged chilling periods, once transferred to suitable conditions, germinated and produced apothecia more rapidly (after fewer degree-days had accumulated) than those exposed to shorter chilling periods. Thus, pseudosclerotia of M. vaccinii-corymbosi are adapted to germinate carpogenically following cold winters (high chill-hours, low degree-days) as well as warm winters (low chill-hours, high degree-days). Results were validated in a combined field-laboratory experiment in which pseudosclerotia that had received various levels of natural chilling were allowed to germinate in controlled conditions in the laboratory, and in two field experiments in which pseudosclerotia were exposed to natural chilling and germination conditions. A simple model describing the timing of apothecium emergence in relation to cumulative chill-hours and degree-days was developed based on the experiments. The model should be useful for better timing of field scouting programs for apothecia to aid in management of primary infection by M. vaccinii-corymbosi.

scholarly journals Nitrogen management in wheat based on the normalized difference vegetation index (NDVI)

2018 ◽  
Vol 48 (9) ◽  
Author(s):  
André Luis Vian ◽  
Christian Bredemeier ◽  
Marcos Alexandre Turra ◽  
Cecília Paz da Silva Giordano ◽  
Elizandro Fochesatto ◽  
...  
Keyword(s):  
Technical Efficiency ◽  
Vegetation Index ◽  
Normalized Difference Vegetation Index ◽  
Field Experiments ◽  
Shoot Biomass ◽  
Sensor Field ◽  
N Dose ◽  
Plant Emergence ◽  
The Moment ◽  
The Relationship

ABSTRACT: Biomass production and nitrogen (N) accumulated in wheat shoots may be used for quantifying optimal topdressing nitrogen doses. The objective of this study was to develop and validate models for estimating the amount of biomass and nitrogen accumulated in shoots and the N topdressing dose of maximum technical efficiency in wheat using the normalized difference vegetation index (NDVI) measured by an active optical canopy sensor. Field experiments were carried out in two years and treatments consisted of N doses applied at plant emergence and as topdressing. NDVI, shoot biomass and N accumulated in shoots at the growth stage of six fully expanded leaves and grain yield were evaluated, being determined the topdressing N dose of maximum technical efficiency (DMTE). The NDVI was positively correlated to shoot biomass and N content in shoots and models for the relationship between these variables were developed and validated. The DMTE was negatively correlated with the NDVI value evaluated at the moment of N topdressing application. Thus, NDVI evaluation by an active optical canopy sensor can be used for nitrogen fertilization in variable rate, allowing the adjustment of applied N doses in different areas within a field.

Weed control in sugar beet with single and split applications of herbicides

1971 ◽  
Vol 77 (2) ◽  
pp. 247-252 ◽  
Author(s):  
Maurice Eddowes
Keyword(s):  
Sugar Beet ◽  
Weed Control ◽  
Field Experiments ◽  
Sandy Loam ◽  
Soil Conditions ◽  
The West ◽  
West Midlands ◽  
Free Environment ◽  
Annual Weeds ◽  
Residual Herbicide

SummaryRecent developments in chemical weed control in sugar beet have been reviewed. Two main approaches to the problem of providing reliable season-long control of annual weeds in sugar beet are, (a) the use of mixtures of herbicides applied pre-planting and incorporated into the soil during seed bed preparation, and (b) the use of split applications with a residual herbicide applied pre-emergence followed by a contact herbicide applied post-emergence.The second approach (b) was examined in a series of field experiments from 1967 to 1969, on light to medium sandy loam soils in the West Midlands. Comparisons were made between pre-emergence application of lenacil and pyrazon, pre-emergence application of lenacil and pyrazon followed by post-emergence application of phenmedipham, and post-emergence application of phenmedipham for weed control in sugar beet.Under dry soil conditions in April 1967, lenacil and pyrazon controlled only about 40% of the annual weeds, but in 1968 and 1969, when moist soil conditions predominated in April and May, lenacil and pyrazon controlled 80–95% of the annual weeds.Phenmedipham applied post-emergence gave about 90% control of annual broadleaved weeds initially, but it seemed unlikely that a single application of this herbicide would provide satisfactory weed control in sugar beet.In each of the 3 years 1967–9, a split application of a soil-acting residual herbicide (pro-emergence) followed by phenmedipham (post-emergence) gave outstanding weed control and enabled sugar beet to be established and grown until mid-June at least, in a near weed-free environment. It was concluded that this technique was the most effective for weed control in sugar beet on light to medium sandy loam soils in the West Midlands.

scholarly journals New protectants for potato protection

2020 ◽  
pp. 4-7
Author(s):  
Grigoriy Leonidovich Belov ◽  
Vladimir Nikolaevich Zeyruk ◽  
Vladimir Anatolyevich Barkov ◽  
Marina Konstantinovna Derevyagina ◽  
Svetlana Viktorovna Vasilieva
Keyword(s):  
Growth And Development ◽  
First Generation ◽  
Field Experiments ◽  
Negative Impact ◽  
Sandy Loam ◽  
Control Treatment ◽  
Potato Tubers ◽  
Complete Protection ◽  
Potato Beetle ◽  
Two Component

In field experiments in the conditions of sod-podzolic sandy loam soils of the Moscow region, protectants were tested. Before planting potatoes, tubers were treated with a new two-component insectofungicide AVG – 0190 (Idikum, SC, iprodion, 133 g/l + Imidacloprid, 100 g/l + diphenoconazole, 6.7 g/l)-1.0 – 1.5 l/t and a mixture of the fungicide Syncler, SC (75 g/l fludioxonyl) and the insecticide Tabu Super, SC (Imidacloprid, 400 g/l and fipronil, 100 g/l)-0.2-0.3 l/t. According to the results of three-year tests, it was found that the etching of potato tubers before planting does not have a negative impact on the germination and biometric indicators of growth and development of potatoes. Their use helped to reduce the development and spread of rhizoctoniosis and provided almost complete protection of potatoes from the first generation of the Colorado beetle – during the mass appearance of older larvae and during the beginning of the departure of larvae for pupation. Biological efficacy against Rhizoctonia amounted to 58.8-66,3%, the Colorado potato beetle – 93,7 95.5 per cent. The use of new potato tuber protectants allowed to increase the gross yield by 6.2-7.1 t / ha or 30.9-35.3% compared to the control. Treatment of seed tubers with protectants helped to obtain a crop free from rhizoctoniosis and increase the yield of standard healthy potatoes by 57.7

Sign in / Sign up

Export Citation Format

Share Document