scholarly journals Dispersion of watermelon rinds as secondary raw materials in technologies of pectin-containing extracts and film structures

2021 ◽  
Vol 17 (5) ◽  
pp. 31-42
Author(s):  
G. S. Meshcheryakova ◽  
A. H.-H. Nugmanov ◽  
I. Yu. Aleksanian ◽  
Yu. A. Maksimenko ◽  
E. V. Sokolova
Keyword(s):  
Original Film ◽  
Raw Materials ◽  
Protective Coatings ◽  
Extraction Process ◽  
Complex Problem ◽  
Film Material ◽  
Resource Base ◽  
Preliminary Preparation ◽  
Sulfuric And Hydrochloric Acids ◽  
Natural Losses

The development of protective coatings based on pectin substances that serve as natural structure-forming agents developed from a secondary resource base is focused on removing a complex problem in the production of finished products by deep processing of basic raw materials and developing an original film material. At the same time, the technical result of obtaining pectin-containing film structures is their ability to protect food products from microbiological spoilage, natural losses during storage and the preservation of quality and safety indicators. An important preparatory procedure that determines the efficiency and intensity of extraction processes can be attributed to the operation of dispersing the feedstock, since it directly affects the size of the contact surface area of the phases involved in mass transfer. However, it is clear that the greater the degree of grinding, the higher the efficiency of the process, but an excessive increase can lead to additional unjustified energy costs and, as a result, to an increase in the cost of the finished products sold. In this regard, the purpose of the research is to analyze existing technologies for producing pectin-containing extracts, in which watermelon rinds can be used as secondary resources and to intensify the extraction process by conducting a rational preparatory procedure for grinding the raw materials. The object of the research are watermelon rinds as non-recyclable waste from processing watermelon raw materials. According to the obtained graphs, and taking into account the high rates of gelatinization of the obtained pectin extracts, it is possible to recommend a complex treatment of watermelon rinds, including, in addition to the operations of preliminary preparation of raw materials, ultrasonic exposure and acid hydrolysis, and it is desirable to use food acids, for example, acetic or citric, instead of aggressive sulfuric and hydrochloric acids. As a result of the study of the dispersed composition, it has been concluded that the average equivalent particle size of the dispersed raw materials does not exceed the recommended limits, that is, the result obtained can be considered acceptable.

scholarly journals ANTI-CORROSION PROTECTION OF METAL PARTS OF TRANSPORTATION EQUIPMENT WITH A POLYMER COATING BASED ON EPOXIURETHANE

2021 ◽  
pp. 46-49
Keyword(s):  
Raw Materials ◽  
Protective Coatings ◽  
National Income ◽  
High Strength ◽  
Operating Mode ◽  
Metal Parts ◽  
Degree Of Protection ◽  
Transportation Equipment ◽  
Preliminary Preparation ◽  
Full Scale Tests

Automotive vehicles are constantly exposed to corrosion processes, and the durability of metal parts depends on the intensity of corrosion. The loss of metals from corrosion is 8-10% of the initial metal mass. In total, losses from corrosion are 4-6% of national income in many countries. This indicates the need for research and the importance of scientific and technical work in this area. This can be achieved by developing a technology for producing anticorrosive compounds and applying them as protective coatings. The anticorrosive protection of a coating synthesized on the basis of local raw materials - epoxyurethane with an additive - was determined by the method of weight loss of metal plates in various aggressive media, impact strength, frost, heat resistance, adhesion and the degree of protection against corrosion. It was found that the synthesized anticorrosive coating possesses high chemical resistance in various environments, the loss of metal mass is insignificant. Full-scale tests were carried out on a MAN CLA 26.280 after its preliminary preparation. The results showed high strength - 75 sm, adhesion - 1 point, and the degree of corrosion resistance was 98.9%. The observation carried out in the operating mode of the car with a run of more than 8 thousand km, and no changes in coating were observed

PROSPECTS FOR LOCAL MINERAL AND RAW MATERIALS USE FOR THE DEVELOPMENT OF THE SOUTHWESTERN REGION OF GOMEL REGION

2020 ◽  
pp. 77-87
Author(s):  
Ivan I. Lishtvan ◽  
Boris V. Kurzo ◽  
Oleg M. Gaidukevich ◽  
Alexandr I. Sorokin
Keyword(s):  
Brown Coal ◽  
Raw Materials ◽  
Bentonite Clay ◽  
Feed Additives ◽  
Economic Feasibility ◽  
Organic Fertilizers ◽  
Added Value ◽  
Drilling Fluids ◽  
Resource Base ◽  
Clay Deposits

The results of the study of the resource potential of Lelchitsky and adjacent regions are presented. It is shown that the raw materials for the production of crushed stone and natural stone in the amount of 1 million m3 is actively extracted in the region with the prospect of volume increasing up to 10 million m3. In addition, peat and sapropel are mined for the production of organic fertilizers, feed additives and drilling fluids. Brown coal and bentonite clay deposits are promising for mining. Peat, sapropel and brown coal should be considered to be raw materials for complex deep processing with the release of more products and materials with high added value. The obtained results allow to conclude that the development of Lelchitsky region and the economic feasibility of building Polesie section of the railway is possible only through integrated development and the most complete use of the entire resource base of the region.

DETERMINATION OF CORROSION INFLUENCE ON FUEL METAL, OBTAINED FROM SECONDARY POLYMER RAW MATERIALS

2021 ◽  
pp. 48-56
Author(s):  
K. Сhevchenko ◽  
A. Grigorov ◽  
I. Sinkevich
Keyword(s):  
Raw Materials ◽  
Petroleum Products ◽  
Copper Plate ◽  
Water Soluble ◽  
Synthetic Fuels ◽  
Laboratory Setup ◽  
Corrosive Effect ◽  
Preliminary Preparation ◽  
Sulfur Containing

The article proposes to determine the corrosion effect on fuel metals under dynamic conditions, when washing the prepared copper plate of a certain size, a significant amount of fuel at a certain speed and temperature of the study. This approach will significantly reduce the duration of the study (up to 100 minutes) and is closer to the real conditions of contact of the fuel with a metal surface, in comparison with the standardized method, which is widely used today. Using the proposed laboratory setup, the study was subjected to fuel (200–360 °C), which was obtained by thermal destruction of secondary polymer raw materials, in particular polypropylene. The obtained results showed that the investigated fuel, despite the temperature, the amount of circulating fuel and its water content, does not have a corrosive effect on the copper plate, which can be explained by the absence of corrosive substances in the fuel: water-soluble mineral acids and alkalis, active sulfur compounds and organic acids. However, it should be kept in mind that in polyolefin raw materials, in the form of contamination, there may be products made of other materials, such as rubber and polyvinyl chloride. This can happen when the sorting technology is violated or during the preliminary preparation of raw materials and, in turn, will contribute to the increase in sulfur-containing and chlorine-containing compounds in the fuel, which are characterized by high corrosion activity and should be necessarily removed from the fuel. Note that the fuel obtained from secondary polymer raw materials, in the absence of sulfur-containing and chlorine-containing compounds, is quite promising for the creation on its basis of modern synthetic fuels, analogues of classic petroleum products.

CALCULATION OF PARAMETERS OF A DIFFUSION PROCESS WITH A CONCENTRATION-DEPENDENT DIFFUSION COEFFICIENT

2020 ◽  
Author(s):  
Е.Г. СТЕПАНОВА ◽  
Б.Ю. ОРЛОВ ◽  
М.А. ПЕЧЕРИЦА
Keyword(s):  
Diffusion Coefficient ◽  
Diffusion Process ◽  
Transfer Problem ◽  
Extraction Process ◽  
Electrochemical Activation ◽  
Calculation Of Parameters ◽  
Sucrose Solutions ◽  
Diffusion Transfer ◽  
Preliminary Preparation ◽  
Series Of Experiments

Приведено решение нелинейной задачи диффузионного переноса с учетом предварительной подготовки экстрагента методом электрохимической активации. Для расчета параметров процесса использована капиллярная модель. Показаны результаты расчета симплекса концентраций от числа Фурье Е = f(Fo). Представлены экстракционные кривые в чистых сахарных растворах с различными видами экстрагентов и температурами процесса 20 и 70°С. Аналитическая обработка кинетических кривых позволила определить основные параметры диффузионного процесса экстрагирования сахарозы. Проведен полный двухфакторный эксперимент lnЕ= f(С; τ), получено уравнение регрессии и построена поверхность отклика, которая исследована методом неопределенных множителей Лагранжа с получением оптимальных значений для проведенной серии опытов С = 15,4% и τ = 750 с. Выполненные расчеты позволяют моделировать внутренний массоперенос экстрагирования концентрационно-зависимого коэффициента диффузии сахарозы при наложении электрического поля при обработке экстрагента. We present a solution to the nonlinear diffusion transfer problem, taking into account the preliminary preparation of the extractant by electrochemical activation (ECHA). A capillary model is used to calculate the process parameters. The results of calculating the concentration simplex from the Fourier number E= f(Fo) are shown. The description of the laboratory installation, the method of the process, and the modes of ECHA preparation of extractants are given. Extraction curves in pure sucrose solutions with different types of extractants and process temperatures are presented. Analytical processing of the kinetic curves of the sucrose extraction process for the regular stage of the process allowed us to determine the main parameters of the diffusion process. A complete two-factor experiment lnE= f(C; τ) was performed. A regression equation was obtained and the response surface was constructed, which was studied by the method of indeterminate Lagrange multipliers to obtain optimal values for the series of experiments С = 15,4% and τ = 750 s. The calculations performed allow us to model the internal mass transfer of extraction of the concentration-dependent sucrose diffusion coefficient when an electric field is applied during processing of the extractant.

Engineering in the technology of manufacture of extruded feed additives

2021 ◽  
Vol 109 (1) ◽  
pp. 44-52
Author(s):  
K. Kostetska ◽  
◽  
I. Ulianych ◽  
V. Zheliezna ◽  
M. Holubiev ◽  
...  
Keyword(s):  
Animal Feed ◽  
Raw Materials ◽  
Feed Additives ◽  
Feed Mixture ◽  
Special Means ◽  
Preliminary Preparation ◽  
Vegetable Raw Materials ◽  
Extruded Feed ◽  
Extrusion Technology ◽  
Technology Of Production

Engineering in the technology of manufacture of extruded feed additives The aim of the work was to expand the range of animal feed and improve the technology of production of extruded feed mixture. Technology of use of preliminary preparation of raw materials: cleaning, reduction of quantity, its dosing according to the recipe, change and special means for improvement of technological authorities and increase of fodder value from processes: preliminary mixing, settling and extrusion of the mixture, cooling and grinding of the product depending on the purpose of the fodder Keywords: grain, fruit and vegetable raw materials, feed additives, extrusion technology, engineering.

scholarly journals Mathematical Development and Evaluation of Forecasting Models for Accuracy of Inflation in Developing Countries: A Case of Vietnam

2015 ◽  
Vol 2015 ◽  
pp. 1-14 ◽  
Author(s):  
Nhu-Ty Nguyen ◽  
Thanh-Tuyen Tran
Keyword(s):  
Raw Materials ◽  
Arima Model ◽  
Consumer Price Index ◽  
Forecast Accuracy ◽  
Complex Problem ◽  
Forecast Performance ◽  
Forecasting Models ◽  
Out Of Sample ◽  
Forecasting Inflation ◽  
Using Data

Inflation is a key element of a national economy, and it is also a prominent and important issue influencing the whole economy in terms of marketing. This is a complex problem requiring a large investment of time and wisdom to attain positive results. Thus, appropriate tools for forecasting inflation variables are crucial significant for policy making. In this study, both clarified value calculation and use of a genetic algorithm to find the optimal parameters are adopted simultaneously to construct improved models: ARIMA, GM(1,1), Verhulst, DGM(1,1), and DGM(2,1) by using data of Vietnamese inflation output from January 2005 to November 2013. The MAPE, MSE, RMSE, and MAD are four criteria with which the various forecasting models results are compared. Moreover, to see whether differences exist, Friedman and Wilcoxon tests are applied. Both in-sample and out-of-sample forecast performance results show that the ARIMA model has highly accurate forecasting in Raw Materials Price (RMP) and Gold Price (GP), whereas, the calculated results of GM(1,1) and DGM(1,1) are suitable to forecast Consumer Price Index (CPI). Therefore, the ARIMA, GM(1,1), and DGM(1,1) can handle the forecast accuracy of the issue, and they are suitable in modeling and forecasting of inflation in the case of Vietnam.

Extraction Process of Amaranthine Pigment Keeping the Water Wax Fuit Biological Active

2013 ◽  
Vol 295-298 ◽  
pp. 150-154
Author(s):  
Feng Jie Wang ◽  
Xin Qiao Dong ◽  
Xiao Liu
Keyword(s):  
Citric Acid ◽  
Extraction Method ◽  
Raw Materials ◽  
Extraction Process ◽  
Extraction Yield ◽  
Extraction Temperature ◽  
Natural Pigment ◽  
Pigment Extraction ◽  
Acid Aqueous Solution ◽  
The Stability

Development natural pigment retained a variety of nutrition composition is extremely research value.Water Wax Trees Fruit was as raw materials,citric acid aqueous solution was as extracting agent.Amaranthine pigment extraction method were studied on fully grasping the stability of the natural amaranthine pigment and no damage to the water wax fruit biological activity.The effect of extraction yield were studied on Water Wax Trees Fruit natural amaranthine pigment.The results show that the better extraction conditions are extraction temperature at 70 °C, extraction time for 3h,citric acid concentration1.0 % , the material/liquid ration(g/ml) 1:5.The extraction yield is 2.95%.Ultraviolet absorption maximum wavelength is 280 nm.

scholarly journals Intensification of the extraction process of phenolic compounds from Acorus calamus leaves

2021 ◽  
pp. 4-10
Author(s):  
Oleksiy Andryushayev ◽  
Olena Ruban ◽  
Yuliia Maslii ◽  
Inna Rusak
Keyword(s):  
Phenolic Compounds ◽  
Raw Materials ◽  
Extraction Process ◽  
Raw Material ◽  
Acorus Calamus ◽  
Optimal Conditions ◽  
Ultrasonic Action ◽  
Different Temperatures ◽  
Method Of Extraction ◽  
Temperature Time

The aim. To determine the intensified method of extraction of phenolic compounds from Acorus calamus leaves and optimal conditions for the process. Materials and methods. In order to develop the optimal intensified method of extraction samples were prepared in different conditions of raw materials-extractant ratio, temperature, time and multiplicity. As a raw materials spectrophotometrically pre-standardized Acorus calamus leaves were used. The extraction was carried out in a hermetically sealed ultrasonic extraction reactor PEX 1 (REUS, Contes, France). As the criteria of extraction efficiency were indicators of dry residue and total amount of flavonoids determined using methods described in State Pharmacopoeia of Ukraine. The amount of flavonoids was determined spectrophotometrically on a certified device Specord 200 (Analytik Jena, Germany). Results. According to our research results it was found that ultrasonic action and addition of surfactant significantly improves the efficiency of the extraction process. The optimal conditions for the process were determined. Experimentally proved that the rational raw material-extractant ratio is 1:15. Comparative study of the extraction process with different temperatures showed that the highest amount of extractives is achieved at temperature 70 °C and 45 min of duration. The optimal extraction multiplicity is 3. Conclusions. As a result of the study, the intensified extraction method for Acorus calamus leaves – re-maceration with ultrasound – was established. The conducted researches allowed to develop the method of extraction, expedient in the conditions of the modern pharmaceutical industry.

scholarly journals Study on domestic market of medicinal products of plant origin

2018 ◽  
pp. 30-36
Author(s):  
V. M. Minarchenko ◽  
A. Yu. Butko
Keyword(s):  
Medicinal Plants ◽  
Raw Materials ◽  
Domestic Market ◽  
Biologically Active Substances ◽  
Biologically Active ◽  
Herbal Remedies ◽  
Plant Origin ◽  
Resource Base ◽  
Natural Resource Base ◽  
Active Substances

The popularity of herbal remedies and medicines, with the participation of biologically active substances from plants is traditionally high. The annual increase of the domestic market for herbal remedies is due to the preservation and modernization of production capacities for processing of medicinal vegetative raw materials in Ukraine, introduction of modern scientific developments, a large natural resource base of medicinal plants and attracting investments in the development of this industry. The aim of our work was the study of the domestic market of medicines of plant origin, which includes herbal remedies, substances and preparations with the participation of biologically active substances from plants. The object of the study was domestic medicines of plant origin that are registered in Ukraine for 2012–2017. The study used the analytical, statistical methods, and the results of its own resource studies of medicinal plants. Phytopharmaceutical market of Ukraine is actively developing due to the attraction of new types of medicinal plants and expanding the range of medicines. The number of domestic drugs with the participation of biologically active substances from plants has increased by 17.4% compared with 2014. It is established that as of 1 January 2017 in Ukraine was 1 141 the form of medicinal drugs of plant origin. Of them: 645 – domestic products, 496 – foreign. Most of the herbal drugs in the pharmaceutical market of Ukraine are made from wild and cultivated domestic raw materials.

scholarly journals PRODUCTION OF EXTRACTS FROM VEGETABLE RAW MATERIALS BY CARBON DIOXIDE

2020 ◽  
Vol 14 (1) ◽  
Author(s):  
K. Gafurov ◽  
B. Muhammadiev ◽  
Sh. Mirzaeva ◽  
F. Kuldosheva
Keyword(s):  
Carbon Dioxide ◽  
Supercritical Co2 ◽  
Raw Materials ◽  
Maximum Yield ◽  
Volumetric Flow Rate ◽  
Extraction Process ◽  
Raw Material ◽  
Critical Conditions ◽  
Plant Materials ◽  
Laboratory Setup

The unique properties of supercritical carbon dioxide as a solvent are widely used for extraction. In supercritical media, the dissolution of molecules of various chemical nature is possible. The purpose of this investigation was to study the extraction process and obtain extracts from valuable regional plant materials by applying CO2 extraction under pre- and supercritical conditions. The objects of research were: ground seeds of melon, pumpkin and licorice roots, as well as mint leaves, mulberry and jida flowers. For extraction, a laboratory setup was used that allows extraction when the CO2 is supplied by a high-pressure plunger pump in the sub- and supercritical state using a heat pump. The pressure range is 3-15 MPa, temperatures 295–330 K, and the volumetric flow rate above the critical CO2 is 800–900 g. Experiments with ground seeds of melon and pumpkin showed that as a result of 4 sequentially performed extraction cycles on a single load with supercritical CO2 parameters ( 315–330 K; 3–7.5 MPa) the decrease in the mass of melon seeds was 90 g (pumpkins 80 g). During the total extraction time (2.5 hours), 20 kg of CO2 were pumped through the reactor (25 l at 290 K and 6.8 MPa), while the average oil content in the extract was 4 g per 1 kg of CO2 (3.0 g per 1 l of SС-CO2) In experiments with jida flowers, the maximum amount of solid extractable substance (2% by weight of the raw material) was obtained at a temperature in the extractor of 308 K and a pressure of 7.5 MPa. Upon extraction under critical conditions in collection 2, the liquid phase was absent; only a yellow-green paste was released in it. According to the results of experiments with mint leaves, the maximum yield of a greenish liquid was observed at T = 315 K and P = 4 MPa., Mulberry - at T = 306 K and P = 6.0 MPa. The results of the extraction of oils and extracts from ground seeds of melon, pumpkin and licorice roots, as well as mint leaves, mulberries and jida flowers confirm that the maximum yield of the extracted substance is achieved with supercritical CO2 parameters in the extractor (310 K, 7.5 MPa). When liquid CO2 is extracted (300 K and 6-8 MPa), up to 2% of a yellow substance is extracted, which does not differ in appearance from a supercritical extract.

Sign in / Sign up

Export Citation Format

Share Document