scholarly journals The Comparative Structural Analysis of the Treatises of Abu Bakr Kalabadi “At-Taarruf” and “Bakhrul- Favaid”

2021 ◽  
Vol 14 ◽  
Author(s):  
Yuldashxodjayev Kamolxon Hoshimxonovich

This article is devoted to the comparative structural analysis of the works of Abu Bakr Kalabadi “At-Ta’arruf” and “Bahrul-favaid”. The impact of the structural analysis of the works on the science of Hadith has been studied with the coverage of these works on the basis of sources that their period and subsequent period became a program-practice for Sufism and the science of Hadith.

2020 ◽  
Vol 15 (1) ◽  
pp. 37-44
Author(s):  
El Mehdi Echebba ◽  
Hasnae Boubel ◽  
Oumnia Elmrabet ◽  
Mohamed Rougui

Abstract In this paper, an evaluation was tried for the impact of structural design on structural response. Several situations are foreseen as the possibilities of changing the distribution of the structural elements (sails, columns, etc.), the width of the structure and the number of floors indicates the adapted type of bracing for a given structure by referring only to its Geometric dimensions. This was done by studying the effect of the technical design of the building on the natural frequency of the structure with the study of the influence of the distribution of the structural elements on the seismic response of the building, taking into account of the requirements of the Moroccan earthquake regulations 2000/2011 and using the ANSYS APDL and Robot Structural Analysis software.


2020 ◽  
Vol 22 (3) ◽  
pp. 19-24
Author(s):  
MARAT R. BIKTIMIROV ◽  
◽  
OLGA V. PILIPENKO ◽  
MAXIM S. SAFONOV ◽  
◽  
...  

Taking practical responsible decisions in the field of social and industrial management in the context of rapid development of digital technologies in the era of the knowledge economy is impossible without reliance on expertise. A kind of organization of activities for the production of ‘predictions’ is required, when not only an accurate assessment of the impact of certain factors and their possible interactions with each other is given, but also as a result of creative construction of scenarios for the development of processes and events, an understanding comes which factors need to be taken into account. At the same time, the expertise constantly faces criticism, calling the conclusions of experts arbitrary, unreliable and subjective. Often, expertise is confused with monitoring, evaluation, diagnosis, inspection or counseling. The authors of the article carried out a structural analysis of the content of the expertise processes in the project management vector in the digitalization era and came to the conclusion that the effectiveness of the expertise is significantly increased in case of clear regulation of this type of activity, providing the necessary status.


Author(s):  
Rossella Cinelli ◽  
Gianluca Maggiani ◽  
Serena Gabriele ◽  
Alessio Castorrini ◽  
Giuliano Agati ◽  
...  

Abstract The Gas Turbine (GT) Axial Compressor (AXCO) can absorb up to the 30% of the power produced by the GT, being the component with the largest impact over the performances. The axial compressor blades might undergo the fouling phenomena as a consequence of the unwanted material locally accumulating during the machine operations. The presence of such polluting substances reduces the aerodynamic efficiency as well as the air intake causing the drop of performances and the increase of the fuel consumption. To address the above-mentioned critical issues, several washing strategies have been implemented so far, among the most promising ones, High Flow On-Line Water Washing (HFOLWW) is worth to mention. Exploiting this technique, the performance levels are preserved, whereas the stops for maintenance should be reduced. Nevertheless, this comes at the cost of a long-term erosion exposure caused by the impact of water washing droplets. Hence, it was deemed necessary to carry out a finite element method (FEM) structural analysis of the first rotor stage of the compressor of an aeroderivative GT, integrated into the HFOLWW scheme, in order to evaluate the fatigue strength of the component subjected to the erosion; possibly along with its acceptability limits. The first step requires the determination of the blade areas affected by erosion, using computational fluid dynamics (CFD) simulations, followed by the creation and the 3D modelling of the damaged geometry. The final step consists in the evaluation of the static stress and the dynamic agents, to perform a fatigue analysis through the Goodman relation and carrying out a simulation of damage propagation exploiting the theory of fracture mechanics. This procedure has been extended to the damage-free baseline component to set-up a model suitable for comparison. The structural analysis confirms the design of the blade, moreover dynamic and static evaluation of the eroded profiles haven’t outlined any working, nor mechanical, issue. This entitles the structural choice of HFOLWW as a system which guarantees full performance levels of the compressor.


2021 ◽  
Vol 13 (9) ◽  
pp. 4608
Author(s):  
Manel Elmsalmi ◽  
Wafik Hachicha ◽  
Awad M. Aljuaid

Companies attempt to improve the performance of their supply chain (SC) by distinguishing and presenting feasible sustainable development practices (SDP). Considering SDP without focusing on sustainability risks may disturb the company’s future. Very few studies in the extant literature have dealt with the impact of (SDP) on the supply chain risk management (SCRM). In fact, the aim of this paper is to classify and prioritize SDPs according to their priority for better risk management and effective SC performance. The proposed approach comprises two phases. First, 14 SDPs are identified and selected from the literature. Second, MICMAC (Matrice d’impacts croisés multiplication appliquée à un classement) method as a structural analysis method applies to identify and assess sustainable supply chain risk management (SSCRM) practices which reduce risk in the SC. The input data for each phase are based on Delphi technique, which is a process group used to collect the opinions of experts in the field. The aim of the proposed approach is to prioritize SSCRM practices and classify them into influential, non-influential, independent and dependent practices and their mutual relationships. The six key findings SSCRM practices from direct and indirect classification include the following elements: (1) Delayed differentiation, (2) Information sharing with upstream and/or downstream partners, (3) Simplification of product dismantling/anticipation of product end of life, (4) Supplier/subcontractor’s performance assessment, (5) establishing shared supply management and (6) establishment of contracts with transporters.


2021 ◽  
Vol 2118 (1) ◽  
pp. 012021
Author(s):  
J D González-Almeyda ◽  
E T Ayala-Garcia ◽  
R Prada-Nuñez

Abstract This article studied the impact and application of physical concepts in the design and construction of the Eiffel Tower in Paris, an architectural reference that implemented physical concepts in its structural design. A documentary methodological framework was used to establish the importance of the Eiffel Tower in the universal exposition of Paris in 1989 and, to carry out the structural analysis of the work; a quantitative-descriptive approach was used for the recognition of the basic concepts of physics from architecture according to gender, through a survey as a research instrument developed under non-probability and convenience sampling, which was applied to students of Architecture of the Universidad Francisco de Paula Santander, Colombia, in order to determine the knowledge of basic physics by students. The results of this research showed that the Eiffel Tower represents a milestone in architecture where physical concepts such as tension, compression, traction, aerodynamics, and torque were applied. Finally, it was evidenced that the students who participated in this study recognize the importance of applying the basic concepts of physics in architecture; fact by which it is recommended to encourage the study of physics, to strengthen the technological component of Architecture.


2012 ◽  
Vol 32 (suppl_1) ◽  
Author(s):  
Caroline Richard ◽  
Patrick Couture ◽  
Sophie Desroches ◽  
Benoît Lamarche

The impact of the Mediterranean diet (MedDiet) on HDL metabolism has not been extensively studied to date. The objective of the study was to investigate the effect of the MedDiet consumed under controlled isoenergetic feeding conditions on HDL as well as on apolipoprotein (apo) AI kinetic in men with metabolic syndrome (MetS). The diet of 26 men aged between 24 to 62 years with the MetS (NCEP-ATP III) was first standardized to a North American control diet, which was consumed for 5 weeks. MedDiet was then consumed over a subsequent period of 5 weeks. Both diets were consumed under isoenergetic feeding conditions with all foods, including red wine, provided to participants. During the last week of each diet, participants received a single bolus of [5,5,5- 2 H 3 ] L -leucine and fasting blood samples were collected at predetermined time points over a period of 96 hours. Kinetic parameters were derived using multicompartmental modeling of the enrichment data over time. Although no change in plasma HDL-C concentrations was observed, consumption of the MedDiet led to a significant reduction in plasma apoAI concentration and pool size (both P <0.05) compared with the control diet. The MedDiet was also associated with a trend towards a reduction in apoAI production rate (PR, P =0.07) but had no impact on apoAI fractional catabolic rate (FCR, P =0.64). However, only variations in apoAI FCR correlated with diet-induced variations in plasma HDL-C and in apoAI concentrations ( r = -0.50 and r = -0.49 respectively, P <0.02). Based on the individual HDL-C response to MedDiet, responders and non-responders were identified. Participants among whom HDL-C concentrations were increased with MedDiet (mean ΔHDL-C: +9.9 ± 3.2 %) showed significantly greater reductions in apoAI FCR and in apoB and VLDL-TG concentrations (all P <0.04) than those among whom HDL-C levels were reduced after the MedDiet (mean ΔHDL-C: -11.1 ± 4.5 %). Data from this controlled feeding study suggest that the heterogeneous response of HDL-C and apoAI to MedDiet is primarily determined by variations in apoAI FCR, which in turn may be due to concurrent changes in plasma TG concentrations.


2015 ◽  
pp. 31-44 ◽  
Author(s):  
A. Balashov ◽  
Y. Martianova

The article analyzes the effectiveness of the budget spending on the develop-ment of military-industrial complex in Russia. The authors assess the impact of re-industrialization policy on the competitiveness of the Russian economy. The research methodology is in the frames of the structural analysis. The Russian defense industry is investigated, basing on the statistics of the federal budget expenditures on national defense, as well as the expertise of government weapons programs. The authors conclude that the implementation of re-industrialization policy will support inefficient industries and sectors instead of eliminating the effect of factors that hinder economic development.


2020 ◽  
Author(s):  
Craig Magee ◽  
Leonardo Muniz-Pichel ◽  
Amber Madden-Nadeau ◽  
Christopher Jackson

&lt;p&gt;Many sedimentary basins worldwide host extensive evaporite deposits, which through salt tectonic processes can form a variety of complex salt structures and diapirs. Many of these basins also host extensive networks of igneous intrusions. It thus seems inevitable that, in some scenarios, magma intruded into a sedimentary basin will interact with salt. However, we have a poor understanding of how the unique rheological and compositional properties of salt, or the local stress states developed around salt bodies, may influence the emplacement and composition of magma. For example, do evaporites and associated salt structures provide preferential flow pathways for ascending magma, or do they capture magma? We also do not know how the interaction of hot magma with salt, or the presence of crystallised intrusions within salt, may impact halokinesis. To understand how salt and magma interact, it is critical to investigate both their structural and chemical relationships within a framework where the timing of intrusion, evaporite deposition, and salt movement is well-constrained. Key problems with this ideal approach to unravel salt-magma interaction are: (i) field (or outcrop) exposures of intrusions within salt allow chemical and small-scale structural analysis of magma-salt interactions, but provide little insight into how the whole system behaved in 3D; whilst (ii) seismic reflection images of intrusions within salt bodies reveal their 3D architecture and may provide insight into the impact of magmatism on halokinesis, but do not allow chemical or small-scale structural analysis, unless drilled.&lt;/p&gt;&lt;p&gt;Here, we use 3D seismic reflection data from the Santos Basin, offshore Brazil to characterise the structure of, and relationships between, 38 igneous sills emplaced below, within, or above a Lower Cretaceous evaporite layer. Salt movement initiated soon after deposition, primarily driven by gravity-driven extension, and continued throughout most of the Cenozoic but with different kinematics and degree of salt rise and diapirism throughout the study-area. In the area hosting the sills, Late Cretaceous-Cenozoic deformation was dominated by continued extension with limited salt rise and diapirism. Conversely, in the area where no sills are recognized, Late Cretaceous-Cenozoic salt tectonics was characterized by passive/active diapirism and localized shortening.&lt;/p&gt;&lt;p&gt;There is little overall geometrical difference between sills emplaced below, within, and above the salt, but we note that many intra-salt sills appear more segmented. Seismic-stratigraphic relationships indicate sill emplacement occurred during several episodes in the Cretaceous between the Turonian-to-Santonian. We suggest this phase of magmatism, which separated the major Albian-Cenomanian and Cenozoic periods of salt movement, locally inhibited diapirism and thereby changed the mode of basin deformation. We attribute this local change in salt diapirism to: (i) crystallisation of igneous sills, which locally increased the mechanical strength of salt and overburden, limiting salt rise and acting as buttresses to lateral salt movement; and (ii) melting and assimilation of weak evaporite layers (e.g., carnallite), which usually act to lubricate salt movement, into the magma. These results shed light into the interaction of two common and important structural processes in sedimentary basins that are relatively well studied separately but whose interaction is often overlooked.&lt;/p&gt;


2020 ◽  
Vol 34 (9) ◽  
pp. 1021-1029 ◽  
Author(s):  
Souleiman El Balkhi ◽  
Caroline Monchaud ◽  
Frédéric Herault ◽  
Hélène Géniaux ◽  
Franck Saint-Marcoux

Background: Scientific data on the psychopharmacological effects of new psychoactive substances (NPSs) are scarce. Web fora contain a wealth of information posted by users as trip reports (TRs), but the reliability of the reports remains questionable because of the nature of the used molecule and the potential for dose inaccuracies. We focused on the TRs of designer benzodiazepine (DBZD) users since their psychopharmacological effects are similar to prescription benzodiazepines (BZDs). Moreover, the impact of functional groups on the BZD rings with regards to the potency has been fairly/quite studied, allowing structural analysis. Methods: DBZDs offering more than 15 TRs with at least two accounts on experienced effects were included. Data were analyzed with the empirical phenomenological psychological method. Reported effects were analyzed and the pharmacological potencies of DBZDs were compared by calculating a ‘potency score’. Results: In total, 197 TRs for clonazolam, deschloroetizolam, diclazepam, etizolam, flubromazepam, flubromazolam, meclonazepam, metizolam, nifoxipam and pyrazolam were analyzed. Effects similar to prescription BZDs were reported for all the selected DBZDs. Pyrazolam was reported to be the most anxiolytic DBZD, flubromazolam the most hypnotic, etizolam the most euphoric and flubromazolam and clonazolam as the most amnesic DBZDs. Diclazepam and pyrazolam were not reported to induce euphoria. Flubromazepam, flubromazolam, clonazolam and meclonazepam were the most potent and deschloroetizolam, nifoxipam, metizolam and pyrazolam the least potent. The chemical structure of the different DBZDs and the functional groups on the BZD rings confirmed this ranking, except for nifoxipam. Conclusions: When information on NPSs obtained from Internet fora are abundant, it could be considered as an appreciable data source.


Sign in / Sign up

Export Citation Format

Share Document