scholarly journals Effect of Honey in the Management of Otomycosis

2017 ◽  
Vol 8 (2) ◽  
Author(s):  
Amisha Patel ◽  
Vaghela D B
Keyword(s):  
Hearing Loss ◽  
Intervention Group ◽  
In Vitro Study ◽  
Signs And Symptoms ◽  
Control Group ◽  
Humid Climate ◽  
Group A ◽  
Clinical Control Trial ◽  
Group B

Otomycosis is a fungal infection of External ear, characterized by earache, pruritus, ear blockage, discharge, hearing loss and ringing in ear.  It is the most common clinical entity in the ENT clinics. The disease is more common in hot and humid climate. Its worldwide prevalence is 5.2 % and 9 % in India. 5-25 % of otitis externa cases are due to otomycosis. Bactericidal and fungicidal activity of Honey is proved previously by in vitro study. Honey has high osmolarity and acidic pH. And fungus does not grow in acidic media. With this background, present study is aimed to know the efficacy of the Honey in the management of Otomycosis. This randomized clinical control trial including two groups, one is intervention group (group A) and second is control group (group B). Pt is advised to instill three drops of Honey thrice a day for 7 days in Group A and three drops of Clotrimazole thrice a day for 7 days in Group B. There is statistically highly significant results was observed in all signs and symptoms except hearing loss which is significant in both Groups. Statistically insignificant difference was found between both Groups. 

EVALUATION OF THE EFFECT OF FERROUS SULFATE ON ENAMEL DEMINERALIZATION OF HUMAN DECIDUOUS TEETH: AN IN VITRO STUDY

2017 ◽  
Vol 8 (3) ◽  
pp. 83-89
Author(s):  
Johnny Holanda De Gauw ◽  
Lara Maria Melo Costa ◽  
Rodrigo Neves Silva ◽  
Natanael Barbosa Santos ◽  
Maria Dânia Holanda Tenorio
Keyword(s):  
Ferrous Sulfate ◽  
Polarized Light ◽  
In Vitro Study ◽  
Deciduous Teeth ◽  
Control Group ◽  
Group A ◽  
Ph Cycling ◽  
Group B ◽  
Group D

Objective: This study aimed to evaluate the effect of ferrous sulfate (FS) on demineralized and non-demineralized human deciduous teeth. Additionally, it was evaluated the penetration extent of FS and its remineralizing effect on the enamel of deciduous teeth using Polarized Light Microscopy (PLM). Method: The sample comprised 44 human deciduous teeth. The 44 crowns were divided randomly into four groups: group A (FS after demineralization), group B (FS without demineralization), group C (only demineralization), and group D (control group). FS at 0.45 mol/L-1 was used daily (15 days) and demineralization was done by pH cycling (7 days). Then, three longitudinal slices of the crowns were photographed using PLM. The degree of penetration of the lesion or stain was measured in micrometers, as well as the distance between the external enamel surface and the core of lesion. Results: Group A showed a dark stain on the outer surface of enamel larger than the group B. It is suggested, a remineralizing effect when comparing groups, A and C. The mean depth and standard deviation for groups A, B, and C were 4.27µm (±1.49), 3.72 µm (±1.68) and 5.00 µm (±1.84), respectively. No dark stains were observed in group D. Conclusion: FS stained the demineralized and non-demineralized human deciduous teeth. However, dark stains in the non-demineralized teeth were smaller or absent, than in the demineralized teeth. Therefore, FS may have a protective effect against demineralization.

scholarly journals Zeolite as a Bone Bio-Modifier Carrier: An In-Vitro Study

2019 ◽  
Vol 9 (1) ◽  
pp. 126
Author(s):  
Mobina Mousavi ◽  
Azadeh Esmaeil Nejad ◽  
Erfan Shamsoddin ◽  
Mohammad Mehdi Golabgiran ◽  
Behzad Houshmand
Keyword(s):  
In Vitro Study ◽  
Positive Control ◽  
Negative Control ◽  
Control Group ◽  
Alizarin Red ◽  
Group A ◽  
Group B ◽  
And Function ◽  
Group D

Background: Zeolite is a microporous aluminosilicate compound which has been successfully used in tissue engineering. The effects of Zeolite on the morphology and functions of pre-osteoblastic MG-63 cells as new bone enhancer material is still unclear. Methods: In this vitro experimental study, MTT and Alizarin red staining test were performed on six groups of MG-63 cells which differed in Zeolite (Z) concentration and the presence or absence of Alloplast extract (A). Group A: 0.1μg/mL Z+A, Group B: 0.1μg/mL Z without A, Group C: 0.2μg/mL Z+A, Group D: 0.2μg/mL Z without A, Group E: 0.3μg/mL Z+A, Group F: 0.3μg/mL Z without A. There were also three control groups as positive control, negative control, and Alloplast control based on each related test. The data were analyzed by SPSS 20 via one-way ANOVA and Welch test. (P<0.05). Results: At 24 hours, results showed that solutions with 0.1μg/mL, 0.2μg/mL, and 0.3μg/mL Zeolite with or without Alloplast had significantly higher proliferation rates than positive control (distilled water) groups without Alloplast (p<0.001). At 72hours time point, the results showed significantly higher proliferation rates in the solutions with 0.1μg/mL, 0.2μg/mL, and 0.3μg/mL Zeolite with or without Alloplast compared to the positive control group without Alloplast (p<0.001). Conclusions: Zeolite can increase proliferation of MG-63 cells without presence of Alloplast; It seems that combination of Zeolite with Alloplast maybe enhancing proliferation and function of MG-63 cells.

Sealing Ability of ProRoot MTA and MTA-Angelus Simulating a One-Step Apical Barrier Technique- An in vitro Study

2009 ◽  
Vol 33 (4) ◽  
pp. 305-310 ◽  
Author(s):  
Nikita Lolayekar ◽  
Sham Bhat ◽  
Sundeep Hegde
Keyword(s):  
Calcium Hydroxide ◽  
In Vitro Study ◽  
Control Group ◽  
Blue Dye ◽  
Root Segments ◽  
Sealing Ability ◽  
Significant Difference ◽  
Group A ◽  
Group B

Endodontic treatment of the pulpless tooth with an immature root apex poses a special challenge for the clinician due to lack of an apical stop against which to compact an interim dressing of calcium hydroxide, or the final obturation material. A one-visit apexification protocol with MTA (Mineral Trioxide Aggregate) has be seen as an alternative to the traditional treatment practices with calcium hydroxide [Ca(OH)2]. The aim of this study was to investigate the use of MTA as a 5mm apical barrier by comparing sealing ability of ProRoot MTA to that of MTA-Angelus. 50 freshly extracted Maxillary and Mandibular single canal sound human incisor teeth were used in this study, which were decoronated to standardized 10mm root lengths. The root segments were prepared to simulate the clinical situation of an open apex with Gates Glidden burs # 5-1 and randomly assigned into 2 experimental groups of 20 samples each (Group A: ProRoot MTA, Group B: MTA-Angelus) and 10 root segments were used as control (Group C) where no apical barrier was used. After obturation the coronal portion of all samples were sealed with Glass Ionomer and stored at 37°C and 100% humidity for 4 weeks. The root segments were then double coated with nail varnish except for the apical 1mm and apical ends of all root segments were suspended vertically in methylene blue dye for 48 hours at room temperature. After removal from the dye, the samples were sectioned longitudinally and linear dye penetration was measured using a Grid and stereomicroscope. The measurements were tabulated and statistically analyzed. The mean percentage of dye leakage for Group A was 55.5% and for Group B was 53.25%. The results showed no statistically significant difference in the sealing ability of ProRoot MTA and MTA-Angelus when used as apical barriers.

Comparative Study to Evaluate the Surface Detail Reproduction of Dental Stone after Immersion in Various Different Disinfectant Solutions, Under Stereomicroscope 10 X Magnification –An In-Vitro Study

2017 ◽  
Vol 9 (3) ◽  
Author(s):  
Rathika Rai ◽  
M. A. Easwaran ◽  
K. T. Dhivya
Keyword(s):  
Sodium Hypochlorite ◽  
In Vitro Study ◽  
Control Group ◽  
Immersion Method ◽  
Significant Difference ◽  
Surface Irregularities ◽  
Disinfectant Solution ◽  
Surface Detail ◽  
Group B

Aim: To evaluate the surface detail reproduction of dental stone this is immersed in different disinfectant solution and studied under stereomicroscope. Methodology: Total number of 30 specimens of dental stone (Type III) were made with measurements of 1.5cm diameter and 1cm height .This samples are divided in to 3 groups group A,B,C. were A is immersed in Distilled water which was taken as control group ;B is immersed in 2% Glutaraldehyde and C is immersed in 5%sodium hypochlorite. Each specimen were immersed in the disinfectant solution for 15 minutes and dried under room temperature for 24 hrs. After 24 hrs each specimens are studied under stereomicroscope for surface details. Result: The results showed no significant difference in the surface irregularities and porosities for a group 1 and group 2 except group 3 which showed significant increase in the porosities, surface irregularities and erosions after disinfection with 5% NaHOCl by immersion method. Conclusion: The surface detail reproduction capacity of die stone was adversely affected when 5% Sodium hypochlorite was used as disinfectant solution when compare d to control group and 2% Glutaraldehyde

scholarly journals Hydroxyl and calcium ions diffusion from endodontic materials through roots of primary teeth - in vitro study

2005 ◽  
Vol 13 (2) ◽  
pp. 187-192 ◽  
Author(s):  
Ana Cristina Gerent Petry Nunes ◽  
Maria José de Carvalho Rocha
Keyword(s):  
In Vitro Study ◽  
Deciduous Teeth ◽  
Control Group ◽  
Apical Surface ◽  
Working Length ◽  
Group A ◽  
Periapical Healing ◽  
Materials Used ◽  
Spectrometer Data

The purpose of this research was to evaluate the diffusion of calcium (Ca+2) and hydroxyl (OH-) ions from materials with a calcium hydroxide base - Ca(OH)2 through the intact roots of deciduous teeth. This diffusion of ions is important for periapical healing. Forty-six deciduous teeth were selected and instrumented to their working length with #40 files. The teeth were washed during cleaning and shaping with a 1% sodium hypochlorite (NaOCl) solution. The canals were dried with paper points. The teeth were divided into 4 groups based on the sealer type, with 10 specimens in each group. A fifth group of 6 teeth without sealer constituted the control group. The materials used as sealers were: Ca(OH)2 paste associated to propylene glycol (CaPE) thickened at the proportion of 2:1 w/v; UFSC (Federal University of Santa Catarina) paste - a mixture of 0.3g of zinc oxide with 0.3g of Ca(OH)2 with 0.2ml of olive oil 1:1 w/w; Vitapex® and Sealapex®. The coronal access was sealed with a glass ionomer after the root had been filled with each sealer. A one-third apical surface and foramen was hard-pressed with Araldite®. The teeth were stored individually in flasks containing saline solution at 37ºC and 100% humidity. The OH- and Ca+2 ions diffusion levels were determined using a pH meter and an atomic absorption spectrometer. Data were collected at 48 hours and at intervals of 7, 30, 45 and 60 days. Statistical analysis was performed using ANOVA to compare groups. In the pH evaluation, the CaPE group presented the largest OH- ions diffusion, which peaked at sixty days (p=0.0309), when compared to the other groups (p<0.0001). In relation to amount of Ca+2 ions released, the CaPE paste showed the best results, followed by the UFSC's paste. These results suggest that the CaPE paste was the material that allowed the highest diffusion of OH- and Ca+2 ions.

scholarly journals Laser versus LED polymerization: Comparison of in vitro preventive sealing procedures

2019 ◽  
Vol 17 (1) ◽  
pp. 228080001881601
Author(s):  
Filiberto Mastrangelo ◽  
Isabella Perraro ◽  
Sabrina Mattia ◽  
Giuseppe Troiano ◽  
Khrystyna Zhurakivska ◽  
...  
Keyword(s):  
Laser Diode ◽  
Tooth Enamel ◽  
In Vitro Study ◽  
Third Molars ◽  
Fissure Sealant ◽  
Microscopic Evaluation ◽  
Group A ◽  
Group B ◽  
Metallization Process

Introduction: The technique of sealing is a widely accepted procedure for prevention of caries. The aim of our in vitro study was to compare the effect of two different curing units (traditional LED source and innovative laser diode lamp) on the integrity of fissure sealant material and its interface with tooth enamel. Materials and methods: Sixty healthy third molars were randomly assigned to two groups. In group A were teeth intended for polymerization by LED B lamp, and group B comprised teeth to be polymerized by an innovative laser diode. Both groups were treated with the traditional sealing technique, subjected to a metallization process, and analyzed by scanning electron microscope. Results: Micro-gaps between the sealant and the enamel were found in specimens in both A (43%) and B (40%) groups ( p=0.793), and sealant shrinkage was seen. Significant differences between the groups emerged in the percentage of perimetric micro-erosion sites (80% vs. 100%, p=0.010) and the presence of holes and micro-bubbles on the sealant surface (21% vs. 63%, p=0.001). Conclusions: Although macroscopic clinical polymerization occurred with both instruments, the microscopic evaluation showed significant differences between the studied groups in terms of perimetric micro-erosion sites and micro-bubbles, which were higher in laser-cured samples.

scholarly journals Deformation of the Internal Connection of Narrow Implants after Insertion in Dense Bone: An in Vitro Study

Materials ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 1833 ◽  
Author(s):  
Rafael Delgado-Ruiz ◽  
Ana Nicolas Silvente ◽  
Georgios Romanos
Keyword(s):  
In Vitro Study ◽  
Surface Damage ◽  
Insertion Torque ◽  
Type Ii ◽  
Before And After ◽  
Post Test ◽  
Group A ◽  
Group B ◽  
Connection Length

Implant connections must resist surgical and prosthetic procedures without deformation. This study evaluated the deformation of different internal connections (IC) of narrow dental implants (NDI) after their insertion in artificial dense bone. Thirty NDI, with different IC geometries, Group A (internal hexagon), Group B (tri-channeled), and Group C (four-channeled), with the same length and similar narrow diameters, were inserted in type II density bone blocks. Drilling protocols for dense bone from each implant manufacturer were followed. The Insertion torque (IT), connection length, vertex angles, and wall deformations were analyzed before and after the insertion of the implants. ANOVA (Analysis of Variance) and Tukey post-test were used for statistical comparisons. IT values were higher for Group A, surface damage, and titanium particles were observed in the IC in all the groups. Angle deformations between 5 and 70 degrees were present in all the groups, and the walls of Group B connection were the most affected by deformations (p < 0.05). Within the limitations of this experiment, it can be concluded that narrow diameter implants will suffer deformation of the implant connection and will also experience surface damage and titanium particle release when inserted in type II bone density.

Inhibitory Effect of Resveratrol on the Pharmacokinetics of Ticagrelor in Vivo and Vitro

2021 ◽  
Author(s):  
Peng Wang ◽  
Xiao-Xia Hu ◽  
Ying-hui Li ◽  
Nan-Yong Gao ◽  
Guo-quan Chen ◽  
...  
Keyword(s):  
Rat Liver ◽  
Liver Microsomes ◽  
In Vitro Study ◽  
Inhibitory Effect ◽  
Control Group ◽  
Rat Liver Microsomes ◽  
Sprague Dawley ◽  
Group B

This study was to evaluate the effect of resveratrol on the pharmacokinetics of ticagrelor in rats and the metabolism of ticagrelor in human CYP3A4 and liver microsomes. Eighteen Sprague-Dawley rats were randomly divided into three groups: group A (control group), group B (50mg/kg resveratrol), and group C (150mg/kg resveratrol ). After 30 minutes administration of resveratrol, a single dose of ticagrelor (18mg/kg) was administered orally. The vitro experiment was performed to examine the influence of resveratrol on ticagrelor metabolism in CYP3A4*1, human, and rat liver microsomes. Serial biological samples were assayed by validated UHPLC-MS/MS methods. In vivo study, the AUC and Cmax of ticagrelor in group B and C appeared to be significantly higher than the control group, while Vz/F and CLz/F of ticagrelor in group B and C were significantly decreased. In vitro study, resveratrol exhibited an inhibitory effect on CYP3A4*1, human and rat liver microsomes. The IC50 values of resveratrol were 56.75μM，69.07μM and 14.22μM, respectively. Our results indicated that resveratrol had a inhibitory effect on the metabolism of ticagrelor in vitro and vivo. It should be paid more attention to the clinical combination of resveratrol with ticagrelor and ticagrelor plasma concentration should be monitored to avoid the occurrence of adverse reaction.

scholarly journals To Evaluate the Marginal Fit of Metal Copings Fabricated by Conventional Casting Procedure and Direct Metal Laser Sintering Technology – an In Vitro Study

2017 ◽  
Vol 05 (01) ◽  
pp. 039-046 ◽  
Author(s):  
Monica Sharma ◽  
Ajay Bansal ◽  
Sunny Panthi ◽  
Shefali Malik ◽  
Atulya Sharma
Keyword(s):  
Glass Ionomer Cement ◽  
In Vitro Study ◽  
Laser Sintering ◽  
Vitro Study ◽  
Direct Metal Laser Sintering ◽  
Marginal Fit ◽  
Significant Difference ◽  
Group A ◽  
Group B

Abstract Purpose: The purpose of this in vitro study was to evaluate marginal fit of cobalt- chromium (Co-Cr) copings fabricated by direct metal laser sintering system (DMLS) and conventional lost-wax technique (LW). Materials and method: Forty tooth preparations were carried out over extracted mandibular molars. They were divided into two groups A and B of 20 each. For group A Co-Cr copings were fabricated by direct metal laser sintering (DMLS) and for group B by lost wax technique (LW). Glass –ionomer cement (GIC) was used to tack the copings over their preparations. Marginal fit was then evaluated directly under the stereomicroscope. Results: The mean marginal gap of group A was 27.9 ± 2.4 μm and group B was 40.4 ±6 μm. Statistical analysis using t - test showed highly significant difference (P>.05) between the marginal mean of the DMLS (group A) compared to LW (group B). Conclusion: The DMLS copings demonstrated superior marginal fit compared to that of conventional Co-Cr casted copings.

scholarly journals Comparison of the Effects of Er, Cr: YSGG Laser and Super-Saturated Citric Acid on the Debridement of Contaminated Implant Surfaces

2018 ◽  
Vol 9 (4) ◽  
pp. 254-260 ◽  
Author(s):  
Gholam Ali Gholami ◽  
Milad Karamlou ◽  
Reza Fekrazad ◽  
Farzin Ghanavati ◽  
Neda Hakimiha ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Citric Acid ◽  
Irradiation Time ◽  
In Vitro Study ◽  
Comparative Investigation ◽  
Water Spray ◽  
Ysgg Laser ◽  
Group A ◽  
Group B

Introduction: Several techniques such as using citric acid, plastic curettes, ultrasonic devices, and lasers have been suggested for debridement of contaminated implant surfaces. This comparative investigation aimed to assess and compare the effects of Er, Cr: YSGG laser and super-saturated citric acid on the debridement of contaminated dental implant surfaces. Methods: In this in-vitro study, 12 contaminated failed implants were collected and randomly divided into 2 groups (6 in group A, and 6 in group B). Also, one implant was considered as the control. The implants were horizontally sectioned into coronal and apical portions and subsequently irradiated by Er, Cr: YSGG laser in coronal and citric acid in apical in group A and the opposite in group B. In order to evaluate the effect of water spray on the laser section, half the laser portion of the implants was irradiated using water, while the other half was irradiated without water with an irradiation time of 1 minute. Results: Results revealed that calculus and plaque removal was greater in the laser part of both groups (with and without water) compared to citric acid parts and the correlation between calculus removal and surface roughness were statistically significant. Furthermore, the surface roughness in the citric acid parts was significantly higher than in laser parts. Water spray during irradiation had a very small influence on understudy factors. Conclusion: Based on the results of this study, the Er, Cr: YSGG laser was more effective in calculus removal and caused less surface roughness compared with citric acid application.

Sign in / Sign up

Export Citation Format

Share Document