scholarly journals Selecting Equipment For The Ergonomic Four-Handed Dental Practice

2001 ◽  
Vol 2 (4) ◽  
pp. 16-21 ◽  
Author(s):  
Betty Ladley Finkbeiner
Keyword(s):  
Stress Reduction ◽  
Working Environment ◽  
Dental Practice ◽  
Equipment Selection ◽  
Advantages And Disadvantages ◽  
Dental Equipment ◽  
Dental Assistant ◽  
Dental Professionals ◽  
Selection Of

Abstract Practicing dental professionals are advised to work with equipment designed to address the need for productivity and stress reduction. Selection of dental equipment for use in an ergonomic, four-handed dentistry practice is integral to the success of the concept. In order for the dental assistant and dentist to work effectively as a team, they have to work in a safe, ergonomically sound working environment. This article examines various designs of dental equipment, the advantages and disadvantages of each, as well as identifies the criteria for equipment selection. Citation Finkbeiner BL. Selecting Equipment For The Ergonomic Four-Handed Dental Practice. J Contemp Dent Pract 2001 Nov;(2)4: 044-052.

scholarly journals A Systematic Literature Review of Multi-Criteria Decision-Making Methods for Sustainable Selection of Insulation Materials in Buildings

2021 ◽  
Vol 13 (2) ◽  
pp. 737
Author(s):  
Indre Siksnelyte-Butkiene ◽  
Dalia Streimikiene ◽  
Tomas Balezentis ◽  
Virgilijus Skulskis
Keyword(s):  
Decision Making ◽  
Literature Review ◽  
Systematic Literature Review ◽  
Energy Demand ◽  
Energy Performance ◽  
Future Research ◽  
Multi Criteria Decision Making ◽  
Insulation Materials ◽  
Advantages And Disadvantages ◽  
Selection Of

The European Commission has recently adopted the Renovation Wave Strategy, aiming at the improvement of the energy performance of buildings. The strategy aims to at least double renovation rates in the next ten years and make sure that renovations lead to higher energy and resource efficiency. The choice of appropriate thermal insulation materials is one of the simplest and, at the same time, the most popular strategies that effectively reduce the energy demand of buildings. Today, the spectrum of insulation materials is quite wide, and each material has its own specific characteristics. It is recognized that the selection of materials is one of the most challenging and difficult steps of a building project. This paper aims to give an in-depth view of existing multi-criteria decision-making (MCDM) applications for the selection of insulation materials and to provide major insights in order to simplify the process of methods and criteria selection for future research. A systematic literature review is performed based on the Search, Appraisal, Synthesis and Analysis (SALSA) framework and the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. In order to determine which MCDM method is the most appropriate for different questions, the main advantages and disadvantages of different methods are provided.

The selection of the main axis and the forming plane in automatic profiling and stamping lines

2021 ◽  
pp. 44-48
Author(s):  
O.M. Koryagina
Keyword(s):  
Main Axis ◽  
Labor Costs ◽  
Simple Shape ◽  
Small Thickness ◽  
Advantages And Disadvantages ◽  
The Third ◽  
Large Length ◽  
Straight Lines ◽  
Light Profiles ◽  
Selection Of

The article defines the main axis and the profiling plane in automatic profiling and stamping lines. Specific recommendations are given for choosing the position of the main axis and the profiling plane, depending on the configuration of the manufactured parts of the roll-formed section. Under the general name of profiling in the practice of stamping works, it is meant to obtain rigid and light profiles of large length and various configurations from sheet blanks. Profiling is carried out in four ways: in dies on crank presses, in dies on special bending presses, on universal bending machines (edging machines), on profiling roller machines. The first method, profiling on crank presses, is used for complex semi-closed and open profiles of relatively small length, if there are no special bending presses or profiling machines. The second method, profiling on special bending presses, is used for open and semiclosed profiles up to 5 mm long. The advantage of such presses is the possibility of using simple, and therefore cheap, tools in the manufacture. The third method, profiling on universal bending machines (edging machines), is used for bending parts (profiles of a simple shape in straight lines with different coupling radii determined by the radius of the machine ruler, for which the latter has a set of rulers). Bending machines allow bending materials of small thickness. Low productivity and the need for physical labor costs limit the use of these machines. The fourth method, profiling on roller machines, is used for open, semi-closed and closed profiles. The essence of the profiling process is to gradually change the profile drawing of a flat belt to a given profile when it is moved sequentially through several pairs of shaped rollers arranged sequentially one after the other in the same plane and rotating at the same speed. The article describes in detail the fourth method; the advantages and disadvantages are noted.

Approaches to the Organization of International Accounting in Russian Enterprises

TEM Journal ◽  
2021 ◽  
pp. 249-258
Author(s):  
Ekaterina V. Surkova ◽  
Galina A. Skachko ◽  
Larisa K. Nikandrova ◽  
Maria M. Starkova ◽  
Nina F. Sakharova
Keyword(s):  
Financial Reporting ◽  
Accounting Information ◽  
Financial Statements ◽  
Reporting Standards ◽  
Optimal Method ◽  
Accounting Standard ◽  
Financial Reporting Standards ◽  
Advantages And Disadvantages ◽  
The Individual ◽  
Selection Of

The article discusses current issues of transformation of accounting information in accordance with international financial reporting standards (IFRS). This study is primarily aimed at developing approaches that determine the need for Russian enterprises to provide accounting information comparable at the international level. The authors analyze methods of transferring data from the Russian Accounting Standard (RAS) to IFRS. The methods used to form financial statements in accordance with IFRS are discussed. The issues of the application of these methods, as well as their advantages and disadvantages, are discussed. The author's approach to the selection of the optimal method of transformation is proposed taking into account the individual needs of organizations.

scholarly journals Acute Ischemic Stroke: A Review of Imaging, Patient Selection, and Management in the Endovascular Era. Part II: Patient Selection, Endovascular Thrombectomy, and Postprocedure Management

2018 ◽  
Vol 02 (03) ◽  
pp. 169-183
Author(s):  
Sharath Kumar G G ◽  
Chinmay Nagesh
Keyword(s):  
Ischemic Stroke ◽  
Acute Ischemic Stroke ◽  
Patient Selection ◽  
Secondary Brain Injury ◽  
Selection Methods ◽  
Vessel Occlusion ◽  
Endovascular Thrombectomy ◽  
Advantages And Disadvantages ◽  
Imaging Patient ◽  
Selection Of

AbstractAppropriate patient selection and expedient recanalization are the mainstay of modern management of acute ischemic stroke (AIS). Only a minority of patients (7–15%) of patients are eligible for endovascular therapy. Patient selection may be time based or perfusion based. Central to both paradigms is the selection of a patient with a small core, a significant penumbra that can be differentiated from areas of oligemia. A brief review of patient selection methods is presented. Endovascular thrombectomy techniques using stentrievers or aspiration catheters have now become the treatment of choice for AIS with large vessel occlusion. A range of devices, each with its own advantages and disadvantages, are available in the market for the neurointerventionist to choose. Techniques vary between devices and between operators, but standardization and protocolization are important within each center. Complications must be anticipated to be avoided. Once reperfusion is achieved, outcomes must be safeguarded with competent postprocedure management to prevent secondary brain injury. These aspects are reviewed in this article.

scholarly journals ANALYSIS OF EXTERNAL ENGINEERING NETWORK METHODS

2020 ◽  
Vol 4 (157) ◽  
pp. 7-11
Author(s):  
V. Zhvan ◽  
V. Donenko ◽  
S. Kulish ◽  
A. Taran
Keyword(s):  
Physical And Mechanical Properties ◽  
Directional Drilling ◽  
Horizontal Directional Drilling ◽  
Technological Parameters ◽  
Optimal Method ◽  
Advantages And Disadvantages ◽  
Analytical Review ◽  
Conducting Research ◽  
The Cost ◽  
Selection Of

The article is devoted to the effective analysis of trench and trenchless pipeline laying technologies. In the course of the work, an analytical review of pipeline assembly was performed, the main technological parameters, the scope of each method, and their advantages and disadvantages were determined. List of considered pipeline laying methods: trenching, horizontal directional drilling, mechanical puncture, hydraulic puncture, microtunneling and punching. The article analyzes the classical trench method and the most widely used trenchless ones: horizontal directional drilling; mechanical puncture; hydraulic puncture; microtunneling; punching. Each of these methods has several advantages and disadvantages. The choice of the optimal method of laying the pipeline depends on many factors: the physical and mechanical properties of soils and hydrogeological conditions, the length and diameter of the pipeline, the presence of other communications, buildings and structures, as well as the budget that customers have. Work time is the last deciding factor. Based on the results of the analysis of pipeline laying technologies and expert survey of construction industry experts, the cost table of each method was compiled, outlining the main characteristics of the technology: length of pipeline, speed of work, scope, cost, and the advantages and disadvantages of each of the considered methods. The conclusions about the use of each of the pipeline laying methods were made. Each of the methods has its advantages and disadvantages, so to choose the method of work it is necessary to conduct a comprehensive assessment of technological parameters, cost, scope and timing of work. The cost of lay-ing the pipeline consists of the following factors: conducting research; selection of diameter and determination of pipeline length; choice of laying method and equipment necessary for the works; selection of equipment, shut-off and control equipment and other materials arranged on the pipeline; terms of performance of works. Taking into account these factors, an estimate is made, which determines the cost of installation of a particular pipeline. After the analysis, we can conclude that among the methods of trenchless laying of pipelines can be identi-fied horizontally directional drilling, it is this method of laying the pipeline will be appropriate to use for our region. The drilling technique allows to carry out pipelines under obstacles, to pull long segments of networks, to repair site damage. This method is universal and can be used in almost any environment. Keywords: trenches, horizontal directional drilling, mechanical puncture, hydraulic piercing, microtunnelling, punching, pipeline.

scholarly journals EXAMINATION OF THE WEED FLORA OF RUDER HABITATS AND THE POSSIBILITY OF SUPPRESSION WITH HERBICIDES

2018 ◽  
Vol 6 (4) ◽  
pp. 329-332
Author(s):  
Milić Vojinović ◽  
Jelica Živić ◽  
Sanja Perić ◽  
Miroljub Aksić
Keyword(s):  
Chenopodium Album ◽  
Working Environment ◽  
Xanthium Strumarium ◽  
Weed Species ◽  
Construction Sites ◽  
Convolvulus Arvensis ◽  
Human Settlements ◽  
Time Of Application ◽  
Vegetation Complex ◽  
Selection Of

Ruderal flora, as well as the vegetation that flora forms, represent an extremely dynamic floristic-vegetation complex and arean integral part of the most immediate living and working environment of human. It is formed and developed mainly in human settlements, as well as in the other anthropogenic environments that are occasionally or permanently under direct or indirect influence of various forms of human activity. Ruderal vegetation is found not only directly around the settlements, but also around all urban and accompanying facilities: along roads, paths and fences around houses, yards, walls and roofs, in avenues, on ruins, construction sites, landfills, along railway tracks, road and defense embankments, on wet and nitrified banks of rivers, near human settlements, in abandoned lawns, on the street walks with sandy areas, cemeteries, in degraded pastures, forests, etc. This essay presents the distribution and representation of economically harmful, invasive and quarantine weed species (Abutilon theophrasti, Agropyrumrepens, Amaranthusretroflexus, Calystegiasepium, Cirsiumarvense, Chenopodium album, Chenopodiumhybridum, Convolvulus arvensis, Cynodondactylon, Daturastramonium, Sonchusarvensis, Sorghum halepense, Xanthium strumarium…) at ten sites in the Nisava district. The assessment of species representation was done in two shootings (May and August) according to scale 1-4. The proper selection of herbicides depends, in a large extent, on the presence of dominant weed species and on the time of application.

scholarly journals Suddenly Telework: Job Crafting as a Way to Promote Employee Well-Being?

2022 ◽  
Vol 12 ◽  
Author(s):  
Christiane R. Stempel ◽  
Katja Siestrup
Keyword(s):  
Working Conditions ◽  
Online Survey ◽  
Well Being ◽  
Job Characteristics ◽  
Social Resources ◽  
Working Environment ◽  
Job Crafting ◽  
Advantages And Disadvantages ◽  
Abrupt Shift ◽  
Quantitative Results

COVID-19 confronted many people with an abrupt shift from their usual working environment to telework. This study explores which job characteristics are perceived as most crucial in this exceptional situation and how they differ from people’s previous working conditions. Additionally, we focus on job crafting as a response to this situation and how it is related to employees’ well-being. We conducted an online survey with N = 599 participants, of which 321 reported that they were telework newcomers. First, we asked participants to indicate the three most important advantages and disadvantages they see in telework. The subsequent questionnaire contained a comprehensive measure of working conditions before and during the pandemic, job crafting behaviors, and indicators of well-being. Based on the qualitative answers, we identified three major advantages and disadvantages. Quantitative results indicate perceived changes in all job characteristics for telework newcomers. Concerning working conditions and well-being, job crafting activities that aim to increase structural and social resources are important mediators. The findings underline the need to design appropriate telework conditions and encourage job crafting activities to foster occupational well-being.

scholarly journals CO-WORKING AS THE COMPONENT OF THE E- ENVIRONMENT FORMING ENTREPRENEURSHIP COMPETENCE. MANAGEMENT, ON-LINE TOOLS FOR BUILDING A FREE WORKING SPACE

World Science ◽  
2019 ◽  
Vol 4 (11(51)) ◽  
pp. 4-11
Author(s):  
Alona Nieliepova
Keyword(s):  
Free Space ◽  
Innovative Activity ◽  
Working Environment ◽  
Educational Institutions ◽  
Higher Educational Institutions ◽  
Adequate Model ◽  
Advantages And Disadvantages ◽  
Working Space ◽  
Higher Educational ◽  
Key Aspects

The subject of the article is the study of modern trends coworking of the university. The key aspects of the co-working center on innovative activity of higher educational institutions of agrarian education are considered in the light of the main advantages and disadvantages of this occurrence. The purpose of the work is to study trends and approaches in the use of coworking in agricultural universities. From the standpoint of the scientific- pedagogical paradigm and systematic approach to the formation of entrepreneurial competence in a free space, the tasks, structure, forms and models of a co-working center oriented to the project-network and scientific- service support of innovative development of the agrarian sphere based on innovative ideas are revealed.A retrospective analysis made it possible to consider the prerequisites for the emergence of co-workings. Based on empirical research methods - questionnaires categories of people working in co-working centers of Ukraine, researched their motives of being in free space, advantages and disadvantages of working in co-working. The analysis of the relationships between the participants in the co-working process has allowed to justify the stages of formation the necessary infrastructure of the internal co-working environment. Conclusion: The peer review method has created an adequate model for the future development of the co-working center for higher education applicants and confirmed that co-working is helping to enhance the professional position of the agricultural business. On the basis of comparative analysis of infrastructure and architecture of software and hardware, mechanisms of organization of co-working present on the market of Ukraine, the key aspects of the model and e-environment of co-working in relation to innovative activity of higher educational institutions of agrarian education are highlighted.

scholarly journals STRUCTURAL DEVELOPMENT AND RESEARCH OF TECHNOLOGICAL PARAMETERS OF MACHINES FOR CENTRIFUGAL -PLANETARY VIBRATION TREATMENT

2020 ◽  
pp. 41-50
Author(s):  
Leonid Yaroshenko ◽  
Igor Kupchuk ◽  
Mykhailo Zamrii
Keyword(s):  
High Efficiency ◽  
Metal Removal ◽  
Three Dimensional ◽  
High Hardness ◽  
Working Environment ◽  
Repeated Loading ◽  
Structural Development ◽  
Technological Parameters ◽  
Advantages And Disadvantages ◽  
Wide Range

The paper analyzes current state and prospects of further development of technology and equipment for mechanization and automation of finishing and cleaning of details. It is stated that the most effective for this purpose are the methods of abrasive machining, which include bulk galvanizing, vibration, centrifugal-rotary and centrifugal-planetary processing. These methods reduce the complexity and cost of processing, which in some cases reaches 20% of the total cost of manufacturing parts. Each of these methods has a different level of efficiency, certain advantages and disadvantages, the level of versatility and scope of effective application. The processes of vibration processing are quite deeply studied, for its industrial mass-produced technological equipment, but they have certain shortcomings that limit their use for further widespread implementation. Centrifugal-rotary processing is a more productive process of three-dimensional finishing and cleaning treatment, but its scope is limited by the possibility of processing parts that are not complex, usually flat. The most productive methods of finishing and cleaning of details include centrifugal-planetary volume processing which high efficiency is caused by repeated loading of particles of working load by inertial forces that creates preconditions for the solutions of a wide range of technological problems, for example, processing of details of difficult form, small weight and the sizes from materials of high hardness or viscosity that represents a serious problem for other methods of volume processing. The constructive scheme is offered in the work and the influence of the composition of the abrasive free-granular working environment on the productivity of the machine for centrifugal-planetary processing of details is investigated. The kinetics of metal removal from the surface of machined parts using different types of abrasive working environment is analyzed. The results of comparative machining of parts in a torus vibrating machine and a machine for centrifugal-planetary machining are given. It is shown that the simultaneous use of centrifugal-planetary and vibration processing methods allows to increase the intensity of the process while ensuring high quality machining of parts of relatively complex shape. The constructive scheme of the machine which allows to implement the specified combined method of processing is offered and described.

Sign in / Sign up

Export Citation Format

Share Document