scholarly journals COMPUTER SIMULATION OF PARTICLE VELOCITY IN A CYCLONE

2021 ◽  
pp. 50-55
Keyword(s):  
Computer Model ◽  
Particle Velocity ◽  
Particle Motion ◽  
Accelerated Motion ◽  
Archimedean Force ◽  
The Given ◽  
Theoretical Foundations ◽  
Dust Flow ◽  
Accelerating Motion

The article sets the goal of determining and calculating the speed of accelerated movement of particles in the gas-dust flow of an air cyclone, depending on the size of the cyclone, the physical properties of the particle and the gas-dust flow. A method for constructing a computer model of the motion of a particle in a roaring gas-dust flow of a cyclone is presented. The sequence of formalization of the computer model of the process of sedimentation of particles of a gas-dust flow of a cyclone unit is based on the theoretical foundations of aerodynamics and touches on the most significant aspects of the development of a cyclone. Attention paid to the analysis of the dynamics of particle motion in a centrifugal field, accelerated motion and a realistic estimate of the particle velocity. The mutual influences of five forces are considered. This is the centrifugal force, the force of resistance of the gas-dust flow, the forces of gravity, the Archimedean force and the force of inertia, acting on the accelerating motion of the particle in the flow. On the basis of the block principle, a general computer model of the cycloning process is built, which makes it possible to calculate the uneven velocity of a particle in a gas-dust flow. Analytical methods for evaluating the acceleration parameters and the main methods of numerical analysis of the dynamics of particle motion, shows that the main advantage of up to 0.8 seconds is the accelerated motion of a particle in a gas-dust flow under the given conditions. During this time, most of the particles reach the cyclone wall. This shows that the determination of the accelerating motion of a particle plays an important role in cyclones.

Interpreting Open- and Closed-Loop Transfer Relations Between Cardiorespiratory Parameters: Lessons Learned from a Computer Model of Beat-to-Beat Cardiovascular Regulation

1997 ◽  
Vol 36 (04/05) ◽  
pp. 237-240
Author(s):  
P. Hammer ◽  
D. Litvack ◽  
J. P. Saul
Keyword(s):  
Computer Model ◽  
Closed Loop ◽  
Computer Models ◽  
Cardiovascular Regulation ◽  
Cardiovascular Control ◽  
Lessons Learned ◽  
Multiple Systems ◽  
Response Characteristics ◽  
Similarities And Differences

Abstract:A computer model of cardiovascular control has been developed based on the response characteristics of cardiovascular control components derived from experiments in animals and humans. Results from the model were compared to those obtained experimentally in humans, and the similarities and differences were used to identify both the strengths and inadequacies of the concepts used to form the model. Findings were confirmatory of some concepts but contrary to some which are firmly held in the literature, indicating that understanding the complexity of cardiovascular control probably requires a combination of experiments and computer models which integrate multiple systems and allow for determination of sufficiency and necessity.

The Role and Place of Budget Procedure in the System

2003 ◽  
pp. 42-49 ◽  
Author(s):  
E. Bushmin
Keyword(s):  
Budget Process ◽  
Public Expenditures ◽  
Principal Role ◽  
Process Trends ◽  
The Given ◽  
Rules Of The Game

The article is devoted to the analysis of improving budget process trends. The author offers the concept of "financial technologism". Its usage should promote an essential improvement of the budget process. The given concept is based on the fact that the regulation of budget procedure is the process of determination of "rules of the game", and the order of interaction of different institutions within the framework of the budget process, and the trends and volumes of expenses are the strategy of institutions. The procedure within the budget process plays a principal role as compared with the trends and volumes of public expenditures.

MODIFIKASI MODEL PEMBELAJARAN TEAM ASSISTED INDIVIDUALIZATION DENGAN STRATEGI PEMBELAJARAN TUGAS DAN PAKSA

2019 ◽  
Vol 2 ◽  
Author(s):  
Lea Christy Restu Kinasih ◽  
Dewi Fatimah ◽  
Veranica Julianti
Keyword(s):  
Cooperative Learning ◽  
Learning Strategies ◽  
Learning Process ◽  
Learning Model ◽  
Learning Models ◽  
Classroom Learning ◽  
Quality Of Learning ◽  
The Given

The selection and determination of appropriate learning strategies can improve the results to be obtained from the application of classroom learning models. This writing aims to discipline students to develop individual abilities of students to be more active in the learning process and improve the quality of learning. The learning process in Indonesia in general only uses conventional learning models that make students passive and undeveloped. In order for the quality of learning to increase, the Team Assisted Individualization learning model is combined with the task learning and forced strategies. The Team Assisted Individualization cooperative learning model is one of the cooperative learning models that combines learning individually and in groups. Meanwhile, task and forced learning strategies are strategies that focus on giving assignments that require students to complete them on time so that the learning process can run effectively. Students are required to do assignments according to the given deadline. This makes students become familiar with the tasks given by the teacher. Combining or modifying the learning model of the assisted individualization team with forced and forced learning strategies is expected to be able to make students more active, disciplined, independent, creative in learning and responsible for the tasks assigned. Therefore this method of incorporation is very necessary in the learning process and can be applied to improve the quality of learning in schools.

MANUFACTURE INVESTIGATION OF CARTRIDGE WITH BOTTOM-MOST PART FLANGE BY DIRECT EXTRUSION WITH COUNTERPUNCH. REPORT 13. DETERMINATION OF DEFORMED STATE UNDER STRAITENED EXTRUSION IN FOURTH CENTRAL AREA OF PLASTIC DEFORMATION

2020 ◽  
Vol 0 (4) ◽  
pp. 43-51
Author(s):  
A. L. Vorontsov ◽  
◽  
I. A. Nikiforov ◽  
Keyword(s):  
Plastic Deformation ◽  
Plastic Flow ◽  
Central Area ◽  
Direct Extrusion ◽  
Deformed State ◽  
Cumulative Deformation ◽  
The Given ◽  
General Method

Formulae have been obtained that are necessary to calculate cumulative deformation in the process of straitened extrusion in the central area closed to the working end of the counterpunch. The general method of plastic flow proposed by A. L. Vorontsov was used. The obtained formulae allow one to determine the deformed state of a billet in any point of the given area. The formulae should be used to take into account the strengthening of the extruded material.

Influence of a chemical preparation of triazole50% cs on sowing the winter wheat against rust

2020 ◽  
Vol 3 (9) ◽  
pp. 231-233
Author(s):  
AliyevSh.K. ◽  
TuychiyevI.U ◽  
Karimov N ◽  
Umaraliev.M.I
Keyword(s):  
Winter Wheat ◽  
Field Experiments ◽  
Yellow Rust ◽  
Biological Efficiency ◽  
Chemical Preparation ◽  
Seed Growth ◽  
Biological Farming ◽  
The Given ◽  
Farming Efficiency

The article is focused on the data of the carried works on studying biological efficiency of fungi Triazole 50% on sowing the winter wheat against yellow rust as well as on the height, development and fertility of the wheat. On May 5, 2019 from 9 to 10 o’clock under the temperature 21-23 field experiments of Triazol 50% CS manufactured by the firm “Agroximstar” (Uzbekistan) were carried out on winter wheat as a protector of seeds of winter wheat of Pervitsa sort against the disease of yellow rustin the irrigated conditions in an experimental field of the Institute “Istiklal” of Andijan district of Andijan region. The aim of the given research is to study biological-farming efficiency and determination of optimal norms of preparation expenses and to study the influence of fungicide on the height and development as well as on the fertility of the wheat. The received data showed that the preparation Triazole 50% CS effected on the pathogen of yellow rust favorably and besides that it didn’t effect on seed growth and energy of growth negatively.

scholarly journals Improvement of Transverse-Flux Machine Characteristics by Finding an Optimal Air-Gap Diameter and Coil Cross-Section at the Given Magneto-Motive Force of the PMs

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 755
Author(s):  
Grebenikov Viktor ◽  
Oleksandr Dobzhanskyi ◽  
Gamaliia Rostislav ◽  
Rupert Gouws
Keyword(s):  
Cross Section ◽  
Computer Model ◽  
Single Phase ◽  
Air Gap ◽  
Laboratory Measurements ◽  
The Finite Element Method ◽  
Power Characteristics ◽  
Transverse Flux ◽  
Output Characteristics ◽  
The Given

This paper presents analysis and study of the single-phase transverse-flux machine. The finite element method results of the machine are compared with the laboratory measurements to confirm the accuracy of the computer model. This computer model is then used to investigate the effect of the machine’s geometry on its output characteristics. Parametric analysis of the machine is carried out to find the optimal air-gap diameter at which the cogging torque of the machine is minimal. In addition, the influence of the coil cross-section on the torque and output power characteristics of the machine is investigated and discussed.

An Analysis of Conventional and Self-Aligned four Terminal Resistor Structures for The Determination of The Contact Resistivity from End Resistance Measurements

1986 ◽  
Vol 71 ◽  
Author(s):  
I. Suni ◽  
M. Finetti ◽  
K. Grahn
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Computer Model ◽  
Contact Resistivity ◽  
Experimental Results ◽  
The Finite Element Method ◽  
Model Based ◽  
A Value ◽  
And Diffusion

AbstractA computer model based on the finite element method has been applied to evaluate the effect of the parasitic area between contact and diffusion edges on end resistance measurements in four terminal Kelvin resistor structures. The model is then applied to Al/Ti/n+ Si contacts and a value of contact resistivity of Qc = 1.8×10−7.Ωcm2 is derived. For comparison, the use of a self-aligned structure to avoid parasitic effects is presented and the first experimental results obtained on Al/Ti/n+Si and Al/CoSi2/n+Si contacts are shown and discussed.

scholarly journals Detection of Tree Roots in an Urban Area with the Use of Ground Penetrating Radar

2016 ◽  
Vol 17 (4) ◽  
pp. 362-370 ◽  
Author(s):  
Alexander Krainyukov ◽  
Igor Lyaksa
Keyword(s):  
Urban Area ◽  
Ground Penetrating Radar ◽  
Growth Direction ◽  
Technical Condition ◽  
Tree Roots ◽  
Secondary Processing ◽  
Non Invasive ◽  
Ground Penetrating ◽  
The Given

Abstract The paper is devoted to using ground penetrating radar (GPR) for the detection of tree roots in an urban area, since GPR allow detect the hidden objects in non invasive way. It is necessary exactly to know the growth direction, thickness and depth of the roots of the tree to confidently assert about the tree root influence on the technical condition of engineering objects and structures: of the buildings, of pavements, of roadway, of engineering communications and etc. The aim of the given research was experimentally to evaluation the possibilities of detection of tree roots in an urban area with the use of GPR on frequency 400 MHz and of algorithms of secondary processing of GPR signals. Results of interpretation of radar profile and evacuation of soil around tree show the possibility of detection of the tree roots and the determination of their parameters using one or two radar concentric profiles.

scholarly journals A spectrophotometric method for determination of fluorophore-to-protein ratios in conjugates of the blue fluorophore 7-amino-4-methylcoumarin-3-acetic acid (AMCA)

1990 ◽  
Vol 38 (1) ◽  
pp. 87-94 ◽  
Author(s):  
M W Wessendorf ◽  
S J Tallaksen-Greene ◽  
R M Wohlhueter
Keyword(s):  
Acetic Acid ◽  
Optical Density ◽  
Extinction Coefficient ◽  
Spectrophotometric Method ◽  
Extinction Coefficients ◽  
Beer's Law ◽  
Beer’S Law ◽  
The Given

7-Amino-4-methylcoumarin-3-acetic acid (AMCA) has been found to be a useful fluorophore for immunofluorescence. The present study describes a spectrophotometric method for determining the ratio of moles AMCA to moles protein (or the f/p ratio) in an AMCA-conjugated IgG. The concentration of a substance absorbing light can be determined spectrophotometrically using Beer's Law: Absorbance = Concentration x Extinction coefficient. From Beer's law, one can derive the following formula for determining the f/p ratio of AMCA-IgG conjugates: f/p = (epsilon 280IgG).A350 - (epsilon 350IgG).A280/(epsilon 350AMCA).A280 - (epsilon 280AMCA).A350 where A is the optical density of the conjugate at the given wavelength and epsilon is the extinction coefficient of a substance at the wavelength specified. Using conjugates of model proteins, it was found that the extinction coefficients of the AMCA moiety of AMCA-conjugated protein were 1.90 x 10(4) at 350 nm and 8.29 x 10(3) at 280 nm. Similarly, it was found that the extinction coefficients of swine IgG were 1.56 x 10(3) at 350 nm and 1.26 x 10(5) at 280 nm. Thus, for AMCA-conjugated swine IgG: f/p = (1.26 x 10(5)).A350 - (1.56 x 10(3)).A280/(1.47 x 10(4)).A280 - (6.42 x 10(3)).A350 [corrected]. Based on this formula, the f/p ratios of some AMCA-IgG conjugates useful for immunohistochemistry have been found to range between 6 and 24.

Sign in / Sign up

Export Citation Format

Share Document