Experimental and CFD Simulation Studies on the Flow Approaching a Type-A Piano Key Weir

2021 ◽  
Author(s):  
Subhojit Kadia ◽  
Binit Kumar ◽  
Elena Pummer ◽  
Nils Ruther ◽  
Zulfequar Ahmad
Keyword(s):  
Flow Field ◽  
Flow Velocity ◽  
Cfd Simulation ◽  
Flow Region ◽  
Type A ◽  
Cfd Simulations ◽  
Outer Flow ◽  
Resultant Velocity ◽  
Piano Key Weir ◽  
Accelerating Flow

<p>Many dams around the world are ageing and require upgradation in terms of spillway capacity and other safety aspects. In recent times, challenges faced due to global warming, climate change and cloudburst events have grown not just in numbers but also in extremity. Consequently, several dams and diversion structures are being modified to cope up with the floods resulting from such events. Piano key weir (PKW) has effectively been used in many dam upgradation projects, especially in France and Vietnam, to enhance the discharge capacity of the existing ogee-crested weirs or labyrinth weirs. It has also been used in a diversion scheme in India (Sawra Kuddu). The flow field around a PKW is spatially varied, complex and three-dimensional in nature. The previous researches on PKWs were predominantly focused on the effect of different parameters on its discharging capacity and limited studies are available on the flow field, sediment movement and scouring at PKWs. Considering these gaps, this study was initiated to understand the flow pattern near PKW and its effect on the sediment transport over PKW. Presented here is the experimental work carried out at IIT Roorkee, India on a Type-A PKW flume model with two discharge values, the CFD simulations of those two flow conditions and a comparison between the results. The time-averaged velocity values were measured at different locations in the front of inlet and outlet keys (upto a distance of 0.1 m from the bed level) using a 3D Acoustic Doppler Velocimeter. The simulations were performed in Ansys (academic 19.1) CFX solver using finite volume method, standard k-ε turbulent model, (where k denotes the turbulent kinetic energy and ε is the rate of dissipation of k) and multiphase (volume of fluid) modelling. The experimental results showed an increase in the depth-averaged longitudinal flow velocity towards the inlet, but a decrease in that towards the outlet. A significant rise in the upward velocity (in the outer flow region) towards both the keys was observed experimentally and numerically. Both the approaches also indicated a significant increase in the lateral velocity near the inlet, especially in the inner flow region. CFD simulations clearly showed decelerating and accelerating flow zones in front of the outlet and inlet keys, respectively, and also revealed an accelerating flow over the inlet. However, the velocity profile inside the inlet key could not be measured experimentally, possibly due to flow unsteadiness, high turbulence and flow separation, and it demands further research. The CFD results generally underestimated the velocity values for the measured 0.1 m depth of flow and the mean absolute error values for the resultant velocity were 18.32% and 15.52% for the two discharges, respectively. The rise in the approaching flow velocity components towards the inlet and the sloping key enhance the opportunity of sediment passage over a PKW in comparison to other weirs. Extending this work, the study on the flow field near two-cycles and three-cycles PKW models is undergoing.</p>

Research of 3D-CFD Simulation on a Large Sized Pit Type Carburizing Furnace

2006 ◽  
Vol 118 ◽  
pp. 337-342
Author(s):  
Wei Min Zhang ◽  
Ye Ma ◽  
Lin Lin Li
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Flow Field ◽  
Gas Flow ◽  
Cfd Simulation ◽  
Fluid Dynamic ◽  
Cfd Simulations ◽  
3 Dimensional ◽  
Set Up ◽  
Carburizing Process

A fluid dynamic model was set up to describe the flow field of gas in a large sized pit type carburizing furnace when large sized gears were being carburized. The commercial software Fluent was adopted to carry out 3 dimensional computational fluid dynamics (3D-CFD) simulations of the gas flow field under different, actually four kinds of , furnace designs in this article. The flow fields of the carburizing gas around the part were analyzed. According to the simulations and analysis, it was shown that the number of fans on gear’s carburizing is not a primary factor, using a air inducting tub can improve the carburizing process significantly and proper loading tray design can also be positive. The results indicate that the simulation provides a reference to the furnace’s design optimization.

scholarly journals An Investigation of Acoustic Attenuation Performance of Silencers with Mean Flow Based on Three-Dimensional Numerical Simulation

2016 ◽  
Vol 2016 ◽  
pp. 1-12 ◽  
Author(s):  
Wei Fan ◽  
Li-Xin Guo
Keyword(s):  
Flow Field ◽  
Flow Velocity ◽  
Cfd Simulation ◽  
Data Transfer ◽  
Transmission Loss ◽  
Three Dimensional ◽  
Mean Flow ◽  
Acoustic Attenuation ◽  
3D Fem ◽  
Expansion Chamber

Transmission loss (TL) is often used to evaluate the acoustic attenuation performance of a silencer. In this work, a three-dimensional (3D) finite element method (FEM) is employed to calculate the TL of some representative silencers, namely, circular expansion chamber silencer and straight-through perforated pipe silencer. In order to account for the effect of mean flow that exists inside the silencer, the 3D FEM is used in conjunction with the Computational Fluid Dynamics (CFD) simulation of the flow field. More concretely, the 3D mean flow field is computed by firstly using CFD, and then the obtained mean flow data are imported to an acoustic solution undertaken using FEM. The data transfer between the two steps is accomplished by mesh mapping. The results presented demonstrate good agreement between present TL predictions and previously published experimental and numerical works. Also, the details of the flow inside the silencers may be studied. Furthermore, the effect of mean flow velocity on acoustic attenuation performance of the silencers is investigated. It is concluded that for the studied silencers, in general, increasing flow velocity increases the TL and decreases the resonance peaks.

scholarly journals Validation of CFD Simulations of Cerebral Aneurysms With Implication of Geometric Variations

2006 ◽  
Vol 128 (6) ◽  
pp. 844-851 ◽  
Author(s):  
Yiemeng Hoi ◽  
Scott H. Woodward ◽  
Minsuok Kim ◽  
Dale B. Taulbee ◽  
Hui Meng
Keyword(s):  
Flow Field ◽  
Cfd Simulation ◽  
Three Dimensional ◽  
Cerebral Aneurysms ◽  
Patient Specific ◽  
Hemodynamic Parameters ◽  
Cfd Simulations ◽  
Piv Measurements ◽  
Cfd Method ◽  
Aneurysm Model

Background. Computational fluid dynamics (CFD) simulations using medical-image-based anatomical vascular geometry are now gaining clinical relevance. This study aimed at validating the CFD methodology for studying cerebral aneurysms by using particle image velocimetry (PIV) measurements, with a focus on the effects of small geometric variations in aneurysm models on the flow dynamics obtained with CFD. Method of Approach. An experimental phantom was fabricated out of silicone elastomer to best mimic a spherical aneurysm model. PIV measurements were obtained from the phantom and compared with the CFD results from an ideal spherical aneurysm model (S1). These measurements were also compared with CFD results, based on the geometry reconstructed from three-dimensional images of the experimental phantom. We further performed CFD analysis on two geometric variations, S2 and S3, of the phantom to investigate the effects of small geometric variations on the aneurysmal flow field. Results. We found poor agreement between the CFD results from the ideal spherical aneurysm model and the PIV measurements from the phantom, including inconsistent secondary flow patterns. The CFD results based on the actual phantom geometry, however, matched well with the PIV measurements. CFD of models S2 and S3 produced qualitatively similar flow fields to that of the phantom but quantitatively significant changes in key hemodynamic parameters such as vorticity, positive circulation, and wall shear stress. Conclusion. CFD simulation results can closely match experimental measurements as long as both are performed on the same model geometry. Small geometric variations on the aneurysm model can significantly alter the flow-field and key hemodynamic parameters. Since medical images are subjected to geometric uncertainties, image-based patient-specific CFD results must be carefully scrutinized before providing clinical feedback.

scholarly journals Realistic boundary conditions in SimVascular through inlet catheter modeling

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Amirtahà Taebi ◽  
Selin Berk ◽  
Emilie Roncali
Keyword(s):  
Boundary Condition ◽  
Flow Field ◽  
Cfd Simulation ◽  
Arterial Tree ◽  
Cfd Simulations ◽  
Tumor Embolization ◽  
Liver Cancer Patient ◽  
Mesh Density ◽  
Flow Velocity Profile ◽  
Computational Fluid Dynamics Cfd

Abstract Objective This study aims at developing a pipeline that provides the capability to include the catheter effect in the computational fluid dynamics (CFD) simulations of the cardiovascular system and other human vascular flows carried out with the open-source software SimVascular. This tool is particularly useful for CFD simulation of interventional radiology procedures such as tumor embolization where estimation of a therapeutic agent distribution is of interest. Results A pipeline is developed that generates boundary condition files which can be used in SimVascular CFD simulations. The boundary condition files are modified such that they simulate the effect of catheter presence on the flow field downstream of the inlet. Using this pipeline, the catheter flow, velocity profile, radius, wall thickness, and deviation from the vessel center can be defined. Since our method relies on the manipulation of the boundary condition that is imposed on the inlet, it is sensitive to the mesh density. The finer the mesh is (especially around the catheter wall), the more accurate the velocity estimations are. In this study, we also utilized this pipeline to qualitatively investigate the effect of catheter presence on the flow field in a truncated right hepatic arterial tree of a liver cancer patient.

scholarly journals Streaming Birefringence - A Step Forward

2008 ◽  
Vol 13-14 ◽  
pp. 23-28 ◽  
Author(s):  
T. Spalton ◽  
Rachel A Tomlinson ◽  
A.E. Garrard ◽  
S.B.M. Beck
Keyword(s):  
Fluid Dynamics ◽  
Aqueous Solution ◽  
Flow Field ◽  
Cfd Simulation ◽  
Three Dimensional ◽  
Shear Stresses ◽  
Cfd Simulations ◽  
Full Field ◽  
Phase Stepping ◽  
Computational Fluid Dynamics Cfd

An investigation into three dimensional fluid flow has been conducted which combines the use of Computational Fluid Dynamics (CFD) simulations with the experimental phenomenon of Streaming Birefringence. A versatile flow channel was designed and built for use in conjunction with a circular polariscope. The experimental liquid used was an aqueous solution of a dye, commercially known as Milling Yellow NGS with the addition of Sodium Chloride. To extract the flow fields, six image phase stepping photoelasticity was used over backward and forward steps, and flows around a cylinder, and full-field fringe data were obtained. This method needs laminar flow regimes and the Reynolds number of the flow was around 10. To allow direct comparisons of the CFD solutions with the optical results, a macro (UDF) was written to interpret the flow field results from a (FLUENT6) CFD simulation. This integrated the shear stresses across the flow field and banded the results into fringes. A good correlation between the simulated fringes and the shearstrain rate was obtained from these observations.

scholarly journals Risk Analysis of Waterway Pipes in Rapid Flow Areas using CFD Simulations

2021 ◽  
Vol 35 (3) ◽  
pp. 48-52
Author(s):  
A-Young Choi ◽  
Sin-Woong Choi ◽  
Chang Gyu Woo ◽  
Dong-Hun Han
Keyword(s):  
Theoretical Model ◽  
Risk Analysis ◽  
Flow Velocity ◽  
Cfd Simulation ◽  
Analysis Program ◽  
Cfd Model ◽  
Cfd Simulations ◽  
Water Pipes ◽  
Rapid Flow ◽  
Accident Site

In this study, the validity of the theoretical model was examined by applying a CFD model and comparing the results of the existing theoretical equations for predicting the flow velocity inside and outside water pipes, and the dangers around the water pipes in the torrent area in relation to the recent fatal accidents of firefighters was analyzed. The CFD simulation was performed using the commercial analysis program ANSYS R1; the actual accident site was measured and simplified. The flow velocity was measured four times faster inside the canal pipe than the outside, and the results were used to suggest a plan to prevent disaster relief activities and safety accidents.

scholarly journals Spectroscopic Techniques versus Pitot Tube for the Measurement of Flow Velocity in Narrow Ducts

Sensors ◽  
2020 ◽  
Vol 20 (24) ◽  
pp. 7349
Author(s):  
Francesco D’Amato ◽  
Silvia Viciani ◽  
Alessio Montori ◽  
Marco Barucci ◽  
Carmen Morreale ◽  
...  
Keyword(s):  
Flow Field ◽  
Flow Velocity ◽  
Pitot Tube ◽  
Optical Measurements ◽  
Trace Gas ◽  
Dual Function ◽  
Spectroscopic Techniques ◽  
Gas Composition ◽  
Flow Conditions ◽  
Theoretical Simulation

In order to assess the limits and applicability of Pitot tubes for the measurement of flow velocity in narrow ducts, e.g., biomass burning plants, an optical, dual function device was implemented. This sensor, based on spectroscopic techniques, targets a trace gas, injected inside the stack either in bursts, or continuously, so performing transit time or dilution measurements. A comparison of the two optical techniques with respect to Pitot readings was carried out in different flow conditions (speed, temperature, gas composition). The results of the two optical measurements are in agreement with each other and fit quite well the theoretical simulation of the flow field, while the results of the Pitot measurements show a remarkable dependence on position and inclination of the Pitot tube with respect to the duct axis. The implications for the metrology of small combustors’ emissions are outlined.

scholarly journals Two-phase CFD simulation of the monodyspersed suspension hydraulic behaviour in the tank apparatus from a circulatory pipe

2008 ◽  
Vol 10 (1) ◽  
pp. 22-27 ◽  
Author(s):  
Roch Plewik ◽  
Piotr Synowiec ◽  
Janusz Wójcik
Keyword(s):  
Cfd Simulation ◽  
Fluidised Bed ◽  
Cfd Simulations ◽  
Two Phase ◽  
Hydraulic Behaviour ◽  
Hydraulic Conditions ◽  
The One ◽  
Cfd Method ◽  
Multi Phase ◽  
The Ideal

Two-phase CFD simulation of the monodyspersed suspension hydraulic behaviour in the tank apparatus from a circulatory pipe The hydrodynamics in fluidized-bed crystallizers is studied by CFD method. The simulations were performed by a commercial packet of computational fluid dynamics Fluent 6.x. For the one-phase modelling (15), a standard k-ε model was applied. In the case of the two-phase flows the Eulerian multi-phase model with a standard k-ε method, aided by the k-ε dispersed model for viscosity, has been used respectively. The collected data put a new light on the suspension flow behaviour in the annular zone of the fluidised bed crystallizer. From the presented here CFD simulations, it clearly issues that the real hydraulic conditions in the fluidised bed crystallizers are far from the ideal ones.

Radial Flow Velocity Field for Predicting Upper-Bound Solutions for Plane Strain Extrusion

1968 ◽  
Vol 90 (1) ◽  
pp. 45-50
Author(s):  
R. G. Fenton
Keyword(s):  
Velocity Field ◽  
Flow Field ◽  
Flow Velocity ◽  
Plane Strain ◽  
Upper Bound ◽  
Radial Flow ◽  
Flow Velocity Field ◽  
Wide Range ◽  
Ram Pressure ◽  
Considerable Range

The upper bound of the average ram pressure, based on an assumed radial flow velocity field, is derived for plane strain extrusion. Ram pressures are calculated for a complete range of reduction ratios and die angles, considering a wide range of frictional conditions. Results are compared with upper-bound ram pressures obtained by considering velocity fields other than the radial flow field, and it is shown that for a considerable range of reduction ratios and die angles, the radial flow field yields better upper bounds for the average ram pressure.

Numerical Analysis of Flow Fields and Temperature Fields in a Regenerative Heating Furnace for Steel Pipes

2018 ◽  
Vol 10 (3) ◽  
Author(s):  
Yi Han ◽  
Feng Liu ◽  
Xin Ran
Keyword(s):  
Temperature Field ◽  
Flow Field ◽  
Flow Velocity ◽  
Gas Flow ◽  
Flow Fields ◽  
Heating Furnace ◽  
Temperature Fields ◽  
Turbulent Layer ◽  
Steel Pipes ◽  
Pipe Blanks

In the production process of large-diameter seamless steel pipes, the blank heating quality before roll piercing has an important effect on whether subsequently conforming piping is produced. Obtaining accurate pipe blank heating temperature fields is the basis for establishing and optimizing a seamless pipe heating schedule. In this paper, the thermal process in a regenerative heating furnace was studied using fluent software, and the distribution laws of the flow field in the furnace and of the temperature field around the pipe blanks were obtained and verified experimentally. The heating furnace for pipe blanks was analyzed from multiple perspectives, including overall flow field, flow fields at different cross sections, and overall temperature field. It was found that the changeover process of the regenerative heating furnace caused the temperature in the upper part of the furnace to fluctuate. Under the pipe blanks, the gas flow was relatively thin, and the flow velocity was relatively low, facilitating the formation of a viscous turbulent layer and thereby inhibiting heat exchange around the pipe blanks. The mutual interference between the gas flow from burners and the return gas from the furnace tail flue led to different flow velocity directions at different positions, and such interference was relatively evident in the middle part of the furnace. A temperature “layering” phenomenon occurred between the upper and lower parts of the pipe blanks. The study in this paper has some significant usefulness for in-depth exploration of the characteristics of regenerative heating furnaces for steel pipes.

Sign in / Sign up

Export Citation Format

Share Document