scholarly journals Development of a chopper charge amplifier for measuring the cavity pressure inside injection moulding tools and signal optimisation with a Kalman filter

2017 ◽  
Vol 6 (1) ◽  
pp. 199-210
Author(s):  
Manuel Schneider ◽  
Alexander Jahn ◽  
Norbert Greifzu ◽  
Norbert Fränzel
Keyword(s):  
Kalman Filter ◽  
Injection Moulding ◽  
Low Cost ◽  
Pressure Sensors ◽  
Cost Effective ◽  
Low Frequencies ◽  
Sensor Signals ◽  
Chopper Amplifier ◽  
Insight Into

Abstract. This article provides insight into the development of a powerful and low-cost chopper amplifier for piezoelectric pressure sensors and shows its possible applications for injection moulding machines. With a power supply of 3.3 volts and the use of standard components, a circuit is introduced which can be connected to a commercially available microcontroller without any additional effort. This amplifier is specialised for low frequencies and high-pressure environments. With the adjustment of the sample and chopper frequency by means of software, the amplifier can easily be adapted for other applications. This chopper amplifier is a very compact and cost-effective solution with a small number of required components. In this contribution, it will be shown that the amplifier has good results in various laboratory tests as well as in the production process. Furthermore, an approach to fuse data from force and pressure signals by using a Kalman filter will be presented. With this method, the quality of the sensor signals can be significantly improved. This article is an extension of our previous work in Schneider et al. (2016b).

scholarly journals Laboratory Evaluations of Correction Equations with Multiple Choices for Seed Low-Cost Particle Sensing Devices in Sensor Networks

Sensors ◽  
2020 ◽  
Vol 20 (13) ◽  
pp. 3661 ◽  
Author(s):  
Wen-Cheng Vincent Wang ◽  
Shih-Chun Candice Lung ◽  
Chun Hu Liu ◽  
Chen-Kai Shui
Keyword(s):  
Sensor Networks ◽  
Low Cost ◽  
Before And After ◽  
Sensor Signals ◽  
Research Grade ◽  
Areas Of Interest ◽  
Equivalent Method ◽  
Correction Equations ◽  
Practical Recommendations

To tackle the challenge of the data accuracy issues of low-cost sensors (LCSs), the objective of this work was to obtain robust correction equations to convert LCS signals into data comparable to that of research-grade instruments using side-by-side comparisons. Limited sets of seed LCS devices, after laboratory evaluations, can be installed strategically in areas of interest without official monitoring stations to enable reading adjustments of other uncalibrated LCS devices to enhance the data quality of sensor networks. The robustness of these equations for LCS devices (AS-LUNG with PMS3003 sensor) under a hood and a chamber with two different burnt materials and before and after 1.5 years of field campaigns were evaluated. Correction equations with incense or mosquito coils burning inside a chamber with segmented regressions had a high R2 of 0.999, less than 6.0% variability in the slopes, and a mean RMSE of 1.18 µg/m3 for 0.1–200 µg/m3 of PM2.5, with a slightly higher RMSE for 0.1–400 µg/m3 compared to EDM-180. Similar results were obtained for PM1, with an upper limit of 200 µg/m3. Sensor signals drifted 19–24% after 1.5 years in the field. Practical recommendations are given to obtain equations for Federal-Equivalent-Method-comparable measurements considering variability and cost.

scholarly journals Adaptive Filtering on GPS-Aided MEMS-IMU for Optimal Estimation of Ground Vehicle Trajectory

Sensors ◽  
2019 ◽  
Vol 19 (24) ◽  
pp. 5357 ◽  
Author(s):  
Haseeb Ahmed ◽  
Ihsan Ullah ◽  
Uzair Khan ◽  
Muhammad Bilal Qureshi ◽  
Sajjad Manzoor ◽  
...  
Keyword(s):  
Kalman Filter ◽  
Autonomous Navigation ◽  
Inertial Sensors ◽  
Low Cost ◽  
Optimal Estimation ◽  
Cost Effective ◽  
Estimation Accuracy ◽  
Ground Vehicle ◽  
Navigation Data ◽  
Mems Imu

Fusion of the Global Positioning System (GPS) and Inertial Navigation System (INS) for navigation of ground vehicles is an extensively researched topic for military and civilian applications. Micro-electro-mechanical-systems-based inertial measurement units (MEMS-IMU) are being widely used in numerous commercial applications due to their low cost; however, they are characterized by relatively poor accuracy when compared with more expensive counterparts. With a sudden boom in research and development of autonomous navigation technology for consumer vehicles, the need to enhance estimation accuracy and reliability has become critical, while aiming to deliver a cost-effective solution. Optimal fusion of commercially available, low-cost MEMS-IMU and the GPS may provide one such solution. Different variants of the Kalman filter have been proposed and implemented for integration of the GPS and the INS. This paper proposes a framework for the fusion of adaptive Kalman filters, based on Sage-Husa and strong tracking filtering algorithms, implemented on MEMS-IMU and the GPS for the case of a ground vehicle. The error models of the inertial sensors have also been implemented to achieve reliable and accurate estimations. Simulations have been carried out on actual navigation data from a test vehicle. Measurements were obtained using commercially available GPS receiver and MEMS-IMU. The solution was shown to enhance navigation accuracy when compared to conventional Kalman filter.

Development of Calibration Equipment for Geodetic Angle Measurement Instruments

2015 ◽  
Vol 220-221 ◽  
pp. 396-400
Author(s):  
Lauryna Šiaudinytė ◽  
Deividas Sabaitis ◽  
Domantas Bručas ◽  
Gintaras Dmitrijev
Keyword(s):  
Low Cost ◽  
Cost Effective ◽  
Angle Measurement ◽  
Measurement Instruments ◽  
Measurement Systems ◽  
Complex Processes ◽  
Cost Effective Alternative ◽  
Reducing Costs ◽  
The Cost

Production of high precision circular scales is a complicated process requiring expensive equipment and complex processes to achieve. Precision angle measurement equipment tends to be very expensive and therefore not accessible to all in need. Simplification of production of such devices can lead to reducing costs of angle measurement systems ensuring easier accessibility. A new method of producing precision circular scales using low cost mass production can reduce the costs of these devices drastically. Therefore, utilising a common CD technology as the basis for such scales is analysed. This paper deals with the analysis of the newest laser cutting method for plastic circular scales. Preliminary results of manufacturing such scales are presented in the paper as well as measurements of the grating of the scale were performed. The quality of different scales manufactured using different laser types is analysed in the study. The cost – effective alternative of manufacturing circular scales is discussed in the paper.

scholarly journals Evaluating the Authenticity of Virtual Environments: Comparison of Three Devices

2016 ◽  
Vol 2016 ◽  
pp. 1-14 ◽  
Author(s):  
Aila Kronqvist ◽  
Jussi Jokinen ◽  
Rebekah Rousi
Keyword(s):  
Virtual Environments ◽  
Cost Effective ◽  
Simulator Sickness ◽  
Quality Of Results ◽  
Immersive Virtual Environments ◽  
Head Mounted Display ◽  
Immersive Virtual Environment ◽  
Specific Factors ◽  
Insight Into

Immersive virtual environments (VEs) have the potential to provide novel cost effective ways for evaluating not only new environments and usability scenarios, but also potential user experiences. To achieve this, VEs must be adequately realistic. The level of perceived authenticity can be ascertained by measuring the levels of immersion people experience in their VE interactions. In this paper the degree of authenticity is measured via anauthenticity indexin relation to three different immersive virtual environment devices. These devices include (1) a headband, (2) 3D glasses, and (3) a head-mounted display (HMD). A quick scale for measuring immersion, feeling of control, and simulator sickness was developed and tested. The HMD proved to be the most immersive device, although the headband was demonstrated as being a more stable environment causing the least simulator sickness. The results have design implication as they provide insight into specific factors which make experience in a VE seem more authentic to users. The paper emphasizes that, in addition to the quality of the VE, focus needs to be placed on ergonomic factors such as the weight of the devices, as these may compromise the quality of results obtained when examining studying human-technology interaction in a VE.

scholarly journals Modern Approaches to Greening the Urban Environment (on the Example of the Shevchenkovsky District, Kharkov)

2019 ◽  
Keyword(s):  
Swot Analysis ◽  
Low Cost ◽  
Urban System ◽  
Cost Effective ◽  
Visual Assessment ◽  
Botanical Garden ◽  
Analysis Method ◽  
High Concentration ◽  
Inventory Map

Purpose. Scientific and practical justification for the introduction of plantings of ornamental perennial cereals and roses of a landscape group in the urban system of the Shevchenkovsky district, Kharkov. Methods For inventory of lawn stands, ArcGIS software was used. The basis for creating an inventory map of lawn stands was two basic maps - “Basemap Imagery” and “OpenStreetMap. The calculation of the total area of the research objects was carried out by using the Attribute Table. Assessment of the design coverage and constitutional structure of the species composition of lawn stands was carried out by A. A. Laptev and E. V. Avdeev. Observation of the ecological state of urban rose gardens was carried out by route examination, the presence of pathologies was determined visually. To determine the optimization measures, the SWOT analysis method was used. Results. An inventory map of urban lawn stands was developed. According to the results of a visual assessment, the T. G. Shevchenko city garden is the standard of landscaping in many territories and has a high level of quality of lawn stands. "23 August" Square sections of lawn populations near the Botanical garden station metro, square on the Klochkovskaya street includes areas of lawn stands with an excellent, good, satisfactory and unsatisfactory level of quality. The surface of Sargin Yar is well planned, the sites have an excellent, good and satisfactory level of quality. Based on the results of lawn stands comprehensive assessment, maps of the quality levels of urban lawn stands for the main recreational zones of the Shevchenkovsky district have been developed. The use of decorative cereals in particular, the impregnation of cylindrical, Chinese Miscanthus, feather grass feather, cane falaris, lightning blue is proposed. Using the SWOT analysis method, the strengths and weaknesses of the lawn stands of the Shevchenkovsky district, the possibilities and risks of their creation are determined. According to the results of an integrated ecological assessment of the varieties of landscape roses "Cordula" and "Tornado", the feasibility of their use in urban gardening is shown. Keeping these varieties in container culture can positively affect the artistic expressiveness of the urban sulfur, will provide a "high concentration of beauty" and solve the problems of wintering. Conclusions. Taking into account the principle of relevance in order to minimize the cost of further supporting the urban landscape, it is possible to develop cost-effective projects for landscaping areas with an unsatisfactory level of quality of lawn cover using decorative cereals. The proposed types of cereal plants are resistant to environmental factors, unpretentious, require minimal maintenance, have a high aesthetic appeal and decorativeness, low cost of creation.

scholarly journals PERCONTOHAN RUANG KOMUNAL DI RUMAH SUSUN TAMBORA, JAKARTA BARAT

2020 ◽  
Vol 1 (1) ◽  
pp. 1
Author(s):  
Maria Immaculata Ririk Winandari ◽  
Julindiani Iskandar ◽  
Dedes Nur Gandarum ◽  
Sri Handjajanti
Keyword(s):  
Design Process ◽  
Low Cost ◽  
Recycled Concrete ◽  
Use Of Space ◽  
Low Cost Housing ◽  
Concrete Materials ◽  
Communal Space ◽  
Insight Into ◽  
Main Material

Communal space will be managed optimally for the development and maintenance carried out by pesertauni. In Tambora Flats (Rusunawa), spacious units of dwelling cause residents need communal space as a place for them to socialize quickly. Understanding and skills regarding the development and maintenance of independent (participatory) spaces are very much needed to improve the use of space, improve the quality of the environment, as well as improve the skills of low-cost housing residents. The target of PKM this time consists of piloting the construction of recycled concrete communal spaces and participatory communal maintenance rooms. The PKM program this time aims to increase knowledge and understanding of communal spaces and the ability to develop these spaces in a participatory manner. The purpose was made through a demonstration of communal space using concrete materials, concrete residue tests from the FTSP Concrete Laboratory as the main material for making benches and garden boundaries. The pilot participants were RW 11 management, RT 009 management, residents who work as artisans, and other residents of Tambora Rusunawa residents in Kelurahan Angke, Tambora District. Participatory agreement required by residents from the design process to completion. The communication room PKM Team Program provides an insight into the design of a good communal space with facilitators who encourage residents to get in the care of the space

A review on cost effective analysis of antiepileptic drugs

2017 ◽  
Vol 6 (9) ◽  
pp. 5507 ◽  
Author(s):  
Uthara S.S. ◽  
Mohammed Basheer ◽  
Anil Babu A.
Keyword(s):  
Quality Of Life ◽  
Developing Countries ◽  
Antiepileptic Drugs ◽  
Low Cost ◽  
Cost Effective ◽  
Global Burden ◽  
Patients With Epilepsy ◽  
Effective Analysis

80% of the epilepsy patients were resides in developing countries. 12 million patients with epilepsy were in India that is One-sixth of the global burden is due to epilepsy. Those diseases were treated properly there is a greater reduction in seizure and people may leads to proper life, if untreated that may become a large increase in burden. Drugs are the main treatment for epilepsy. As compared with conventional AEDs newer drugs are much expensive some newer drugs were 10 to 20 times costlier than older drugs. if those expensive drugs reduce the seizure events, improves the quality of life and with lesser ADRs then the benefit justify the higher cost of the drug. The epilepsy burden can be reduced mainly by giving epilepsy care at low cost, given the lack of expertise in the management of epilepsy in poor areas.

Pendeo Epitaxy Of 3C-SiC on Si Substrates

2000 ◽  
Vol 622 ◽  
Author(s):  
G.E. Carter ◽  
T. Zheleva ◽  
G. Melnychuck ◽  
B. Geil ◽  
K. Jones ◽  
...  
Keyword(s):  
Low Cost ◽  
Large Diameter ◽  
Side Wall ◽  
Cost Effective ◽  
Interface Layer ◽  
Lateral Epitaxial Overgrowth ◽  
Si Substrates ◽  
Device Applications ◽  
Sic Film

ABSTRACTPendeo Epitaxy is a type of Lateral Epitaxial Overgrowth (LEO) that instead of using a dielectric buffer layer, uses an etched substrate to grow laterally without an interface layer. We report the first successful growth of 3C-SiC on Si using Pendeo epitaxy. Rectangular stripes of 3C-SiC on (100) Si substrates were fabricated, along both the [110] and [100] directions. Pendeo epi was only observed for columns parallel to [001], indicating a preferred growth facet for Pendeo epi of 3C-SiC on Si. SEM and TEM investigations were performed to assess the material quality of the Pendeo 3C-SiC material. Films were grown for 60 min at 1310°C and film coalescence was achieved without evidence of voids where the growth fronts joined. TEM data indicate not only the growth of vertical and lateral 3C-SiC on the 3C-SiC seed layer but direct nucleation of 3C-SiC on the exposed Si columns side wall and trench bottom, despite the lack of a carbonization procedure. The quality of the Pendeo 3C-SiC film appears to be of high quality indicating that Pendeo epi of 3C-SiC on low-cost, large-diameter Si substrates may prove to be a cost effective way to grow device-grade SiC layers on Si substrates for device applications.

scholarly journals Removal of Copper from Water Solutions by Adsorption on Spruce Sawdust

Proceedings ◽  
2019 ◽  
Vol 16 (1) ◽  
pp. 52 ◽  
Author(s):  
Zdenka Kovacova ◽  
Stefan Demcak ◽  
Magdalena Balintova
Keyword(s):  
Wastewater Treatment ◽  
Low Cost ◽  
Cost Effective ◽  
Peat Moss ◽  
Human Beings ◽  
Cost Effective Method ◽  
Negative Impacts ◽  
Major Factors ◽  
Scientific Attention

Pollution of water by toxic elements is one of the major factors of concern for human health, as well as for environmental quality, and draws a large amount of scientific attention. New and cheaper methods of wastewater treatment are increasing the quality of the environment and reducing the negative impacts on fauna, flora, and human beings. The sorption technique is considered a cost effective method for effectively removing heavy metals. During the past few years, there have been increasing studies dedicated to using low-cost adsorbents like bark, tannin-rich materials, lignin, chitosan peat moss, and sawdust. The presented paper describes the adsorption behavior of spruce wood sawdust. In order to determine its applicability for wastewater treatment, copper removal from model solutions was studied.

scholarly journals Pelleting Vineyard Pruning at Low Cost with a Mobile Technology

Energies ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 2477 ◽  
Author(s):  
Giuseppe Toscano ◽  
Vincenzo Alfano ◽  
Antonio Scarfone ◽  
Luigi Pari
Keyword(s):  
Low Cost ◽  
Cost Effective ◽  
Point Of View ◽  
Production Costs ◽  
Direct Production ◽  
Economic Point ◽  
Before And After ◽  
Variable Distance ◽  
Intermediate Storage

The goal of this work was to test a patented pruning harvester and a mobile pelleting system specifically designed for the vineyard agripellet chain. Biomass was characterized before and after storage and after the pelleting stage. The performance, the fuel consumption, and the work quality of the harvester were assessed together with the productivity and the power consumption of the mobile pelleting system. Production costs of pellet were estimated for the whole logistic chain, considering two scenarios: Storage and pelleting directly at the farm site or at a dedicated location at variable distance from the fields. For comparison, the direct production of chips without pelleting was considered. Results indicate that harvester performance was quite good and comparable with commercial solutions; the chips produced exhibited excellent storage performance, allowing direct pelleting without forced drying; the pellet quality was good comparable with that produced from forestry biomass. From an economic point of view, in-field pelleting was the most cost-effective solution, with a good margin of profit up to 57€ t−1; on the other hand, when transport to an intermediate storage center is necessary, profit margin reduces gradually and fades off at an average 50 km distance from the fields.

Sign in / Sign up

Export Citation Format

Share Document