scholarly journals Novel 8-Port Network

2021 ◽  
Vol 3 (31) ◽  
pp. 05-16
Author(s):  
W. M. ALSAMKARI ◽  
◽  
ADNAN. M. AFFANDI ◽  
Keyword(s):  
Dielectric Constant ◽  
Theoretical Analysis ◽  
Millimeter Wave ◽  
Ground Plane ◽  
Radar System ◽  
Power Combiner ◽  
Compact Structure ◽  
Signal Flow ◽  
Coupled Lines ◽  
Unique Signal

The proposed 8-port network which consists of 4-coupler combined in unique way to produce 8-port network. This network with the proper terminations will find many applications in microwave and millimeter wave networks. This proposed 8-port network (with the proper termination) can be used as power combiner divider, six-port reflect meter in order to measure both the amplitude and the phase of the network under test. The proposed 8-port also can be used as phase comparator in a monopulse radar system for determining both the azimuth and the elevation of the target (K. Chang, et al, 1987). In addition, the circuit can be utilized as a 4-way power combiner/divider with the sub-arms isolated from one another. Generally, this 8-port network enjoys a compact structure which contains slots in sections the ground plane and between the coupled lines in order to improve the performance of this networks. Also this circuit can be utilized with proper termination as a network synthesize (G. Matthaei, et al, 1980). In the theoretical analysis of the proposed 8-port network, unique signal flow has been developed for this proposed. The purpose of the 8-port has been fabricated on Roger substrate of dielectric constant (ɛṛ = 3.38) and (thickness of the substrate is =0.2).

scholarly journals High Efficiency and Broadband Microstrip Leaky-Wave Antenna

2008 ◽  
Vol 2008 ◽  
pp. 1-6
Author(s):  
Onofrio Losito
Keyword(s):  
Dielectric Constant ◽  
Theoretical Analysis ◽  
High Efficiency ◽  
Simple Procedure ◽  
Ground Plane ◽  
Relative Dielectric Constant ◽  
Leaky Wave ◽  
Leaky Wave Antenna ◽  
Wave Antenna ◽  
Conductor Strip

A novel layout of leaky-wave antennas based on tapered design has been proposed and investigated. The new tapered leaky-wave antenna (LWA) was designed running a simple procedure which uses an FDTD code, and using a suitable metal walls down the centerline along the length of the antenna connecting the conductor strip and the ground plane, which allows to use only half of the structure, the adoption of a simple feeding, and the reduction of sidelobes. The good performance of this new tapered microstrip LWA, with reference to conventional uniform microstrip LWAs, is mainly the wider band of 33% for VSWR<2, higher gain (12 dBi), and higher efficiency (up to 85%). Furthermore, from the theoretical analysis we can see that, decreasing the relative dielectric constant of the substrate, the bandwidth of the leaky-wave antenna becomes much wider, improving its performance.

scholarly journals Triangular Slot-Loaded Wideband Planar Rectangular Antenna Array for Millimeter-Wave 5G Applications

Electronics ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 778
Author(s):  
Iftikhar Ahmad ◽  
Houjun Sun ◽  
Umair Rafique ◽  
Zhang Yi
Keyword(s):  
Antenna Array ◽  
Millimeter Wave ◽  
Communication Systems ◽  
Ground Plane ◽  
Simulated Data ◽  
Impedance Bandwidth ◽  
Antenna Element ◽  
Single Antenna ◽  
Rectangular Patch ◽  
Half Power

This paper presents a design of a triangular slot-loaded planar rectangular antenna array for wideband millimeter-wave (mm-wave) 5G communication systems. The proposed array realizes an overall size of 35.5 × 14.85 mm2. To excite the array elements, a four-way broadband corporate feeding network was designed and analyzed. The proposed array offered a measured impedance bandwidth in two different frequency ranges, i.e., from 23 to 24.6 GHz and from 26 to 45 GHz. The single-antenna element of the array consists of a rectangular patch radiator with a triangular slot. The partial ground plane was used at the bottom side of the substrate to obtain a wide impedance bandwidth. The peak gain in the proposed array is ≈12 dBi with a radiation efficiency of >90%. Furthermore, the array gives a half-power beamwidth (HPBW) of as low as 12.5°. The proposed array has been fabricated and measured, and it has been observed that the measured results are in agreement with the simulated data.

scholarly journals Toward a fully integrated automotive radar system-on-chip in 22 nm FD-SOI CMOS

2021 ◽  
pp. 1-9
Author(s):  
Philipp Ritter
Keyword(s):  
Millimeter Wave ◽  
Flip Chip ◽  
Printed Circuit Board ◽  
Digital Signal ◽  
Cmos Technology ◽  
Radar System ◽  
Circuit Board ◽  
Processing Unit ◽  
Automotive Radar ◽  
On Chip

Abstract Next-generation automotive radar sensors are increasingly becoming sensitive to cost and size, which will leverage monolithically integrated radar system-on-Chips (SoC). This article discusses the challenges and the opportunities of the integration of the millimeter-wave frontend along with the digital backend. A 76–81 GHz radar SoC is presented as an evaluation vehicle for an automotive, fully depleted silicon-over-insulator 22 nm CMOS technology. It features a digitally controlled oscillator, 2-millimeter-wave transmit channels and receive channels, an analog base-band with analog-to-digital conversion as well as a digital signal processing unit with on-chip memory. The radar SoC evaluation chip is packaged and flip-chip mounted to a high frequency printed circuit board for functional demonstration and performance evaluation.

scholarly journals Temperature Characterization of Liquid Crystal Dielectric Image Line Phase Shifter for Millimeter-Wave Applications

Crystals ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 63
Author(s):  
Henning Tesmer ◽  
Rani Razzouk ◽  
Ersin Polat ◽  
Dongwei Wang ◽  
Rolf Jakoby ◽  
...  
Keyword(s):  
Liquid Crystal ◽  
Millimeter Wave ◽  
Insertion Loss ◽  
Phase Shifter ◽  
Ground Plane ◽  
Temperature Dependent ◽  
Differential Phase ◽  
Dependent Behavior ◽  
The Impact ◽  
Temperature Dependent Behavior

In this paper we investigate the temperature dependent behavior of a liquid crystal (LC) loaded tunable dielectric image guide (DIG) phase shifter at millimeter-wave frequencies from 80 GHz to 110 GHz for future high data rate communications. The adhesive, necessary for precise fabrication, is analyzed before temperature dependent behavior of the component is shown, using the nematic LC-mixture GT7-29001. The temperature characterization is conducted by changing the temperature of the LC DIG’s ground plane between −10∘C and 80 ∘C. The orientation of the LC molecules, and therefore the effective macroscopic relative permittivity of the DIG, is changed by inserting the temperature setup in a fixture with rotatable magnets. Temperature independent matching can be observed, while the insertion loss gradually increases with temperature for both highest and lowest permittivity of the LC. At 80 ∘C the insertion loss is up to 1.3dB higher and at −10∘C it is 0.6dB lower than the insertion loss present at 20 ∘C. In addition, the achievable differential phase is reduced with increasing temperature. The impact of molecule alignment to this reduction is shown for the phase shifter and an estimated 85% of the anisotropy is still usable with an LC DIG phase shifter when increasing the temperature from 20 ∘C to 80 ∘C. Higher reduction of differential phase is present at higher frequencies as the electrical length of the phase shifter increases. A maximum difference in differential phase of 72∘ is present at 110 GHz, when increasing the temperature from 20 ∘C to 80 ∘C. Nevertheless, a well predictable, quasi-linear behavior can be observed at the covered temperature range, highlighting the potential of LC-based dielectric components at millimeter wave frequencies.

scholarly journals Simultaneous Target Classification and Moving Direction Estimation in Millimeter-Wave Radar System

Sensors ◽  
2021 ◽  
Vol 21 (15) ◽  
pp. 5228
Author(s):  
Jin-Cheol Kim ◽  
Hwi-Gu Jeong ◽  
Seongwook Lee
Keyword(s):  
Millimeter Wave ◽  
Radar System ◽  
Sensor Data ◽  
Test Field ◽  
Target Classification ◽  
Radar Sensor ◽  
Millimeter Wave Radar ◽  
Direction Estimation ◽  
Wave Radar ◽  
Moving Direction

In this study, we propose a method to identify the type of target and simultaneously determine its moving direction in a millimeter-wave radar system. First, using a frequency-modulated continuous wave (FMCW) radar sensor with the center frequency of 62 GHz, radar sensor data for a pedestrian, a cyclist, and a car are obtained in the test field. Then, a You Only Look Once (YOLO)-based network is trained with the sensor data to perform simultaneous target classification and moving direction estimation. To generate input data suitable for the deep learning-based classifier, a method of converting the radar detection result into an image form is also proposed. With the proposed method, we can identify the type of each target and its direction of movement with an accuracy of over 95%. Moreover, the pre-trained classifier shows an identification accuracy of 85% even for newly acquired data that have not been used for training.

scholarly journals Frequency reconfigurable monopole antenna with DGS for ISM band applications

2018 ◽  
Vol 69 (4) ◽  
pp. 293-299 ◽  
Author(s):  
Boddapati T. P. Madhav ◽  
Shaik Rajiya ◽  
Badugu P. Nadh ◽  
Munuswami S. Kumar
Keyword(s):  
Dielectric Constant ◽  
Wireless Communication ◽  
Transmission Line ◽  
Ground Plane ◽  
Reconfigurable Antenna ◽  
Pin Diodes ◽  
Microstrip Transmission Line ◽  
Ism Band ◽  
Frequency Reconfigurable Antenna ◽  
Antenna Model

Abstract In this article a compact frequency reconfigurable antenna is presented for wireless communication applications of industrial, scientific and medical band (ISM). The proposed antenna model is designed with the dimensions of 58mm×48 mm on FR4 epoxy of dielectric constant 4.4 with the thickness of 0.8 mm. The proposed antenna consists of defected T-shape ground plane, which acts as a reflector. In the design of frequency reconfigurable antenna, BAR 64-02V PIN diodes are used as switching elements and antenna is fed by microstrip transmission line. The proposed antenna can switch at different frequencies (2.5 GHz, 2.3 GHz and 2.2 GHz) depending on the biasing voltage applied to the PIN diodes. The current antenna showing VSWR < 2 in the operating band and providing peak realized gain of 3.2 dBi. A good matching obtained between expected and the measured results.

Sign in / Sign up

Export Citation Format

Share Document