scholarly journals Questions of immunodiagnostics in the teaching of phthisiology for students of the pediatric faculty

2021 ◽  
pp. 20-28
Author(s):  
Ekaterina Pavlovna Eremenko ◽  
Andrey Viktorovich Kalinkin ◽  
Boris Evgenievich Borodulin ◽  
Evgeniya Andreevna Amosova ◽  
Elizaveta Sergeevna Vdoushkina ◽  
...  
Keyword(s):  
Interdisciplinary Approach ◽  
Training System ◽  
Educational Material ◽  
Tuberculosis Infection ◽  
Basic Knowledge ◽  
Federal State ◽  
Test Problems ◽  
Practical Training ◽  
Practical Skills ◽  
Child Population

The quality of training of medical specialists is laid down during training at a medical university, where basic knowledge and the ability to manipulate them are laid, and, on the basis of the acquired competencies, to form practical skills. The issues of tuberculosis infection occupy a significant part in the work of a pediatrician. First of all, these are the issues of screening the child population for tuberculosis, early detection and specific prevention of tuberculosis. For the effective preparation of students of the pediatric faculty, it is necessary to lay theoretical knowledge in the program, to form practical skills and abilities. Since the detection of tuberculosis patients is carried out in medical institutions of the general pediatric network, it is necessary to master professional competencies. The preparation of students within the framework of the basic specialty "phthisiology" has its own nuances due to the specifics of medical education, the diversity of tuberculosis infection, the peculiarities of the organization and provision of anti-tuberculosis care to the child population. Training in the specialty "phthisiology" requires a large amount of special knowledge, skills, improvement of the interdisciplinary approach, in accordance with the requirements of the federal state educational standard. The article provides an analysis of the ongoing training system for students of the pediatric institute in the online system, presents the experience of the department in teaching students during the period of distance education during the spread of a new coronavirus infection. The assessment of the results of practical training among 6th year students of the pediatric faculty (n = 123). It was revealed that it is not always possible to predict in advance the degree of understanding of the educational material, and even the depth of understanding the questions in the test problems. The use of scientific evidence-based statistical methods for evaluating test items helps in optimizing and objectifying knowledge control and understanding the educational material.

Methodological foundations of legal education reform in Ukraine: Scientific paradigm and modern context

2021 ◽  
Vol 28 (2) ◽  
pp. 114-122
Author(s):  
Oleksii O. Kot ◽  
Nadiia V. Milovska ◽  
Leonid V. Yefimenko
Keyword(s):  
Education Reform ◽  
Professional Training ◽  
Legal Education ◽  
Legal Regulation ◽  
Training System ◽  
The State ◽  
Educational Process ◽  
Practical Training ◽  
Practical Skills ◽  
Foreign Experience

The study investigates the current state and defines the methodological foundations for improving the practical training of lawyers in the context of reforming legal education by establishing the features of legal regulation of legal education and its role in the state system, identifying the main problems of modern legal education, as well as analysing foreign experience in practical training of specialists in the field of law. The study uses general scientific and special legal methods of scientific cognition, including comparative legal, philosophical and functional methods, dialectical and formal legal methods of cognition, method of analysis and synthesis. The paper established that the professional training of future specialists in the field of law is currently described by a disparity between the theoretical knowledge and practical skills of law graduates, which complicates their adaptation to practical work. The authors of this study proved that the reform of the legal training system through increasing its practical orientation, determining the state needs of legal personnel of various educational levels, internationalisation of higher education, introduction of new specialisations in accordance with the needs of various spheres of legal practice, should become the basis for the development of legal education in Ukraine. Attention was focused on the need to optimise the system of training legal personnel mainly through the introduction of new teaching methods, the approval of new educational standards, considering the corresponding progressive foreign experience in this field, provided that the accumulated experience, traditions, and principles of Ukrainian higher legal education are preserved, thereby ensuring the development of future specialists with stable practical skills of law enforcement activities. It was found that in the context of the reform of legal education, it is important to establish such requirements for the educational process that would ensure that students master not only a minimum amount of knowledge, but also practical skills because practical training of students is a mandatory component of the educational and professional programme for obtaining an educational degree. In particular, it is necessary to reorient the content and orientation of educational works of applicants for legal education, which should be focused not only on repeating or reproducing theoretical material, but also on solving specially developed practical situations. The issue of increasing the duration of internships and effective cooperation between educational institutions and employers is also important. Improving the effectiveness of training specialists in the field of law through a proportional ratio of theoretical and practical content of the educational process in legal specialities is aimed at modernising the higher legal education model in Ukraine

scholarly journals Transformation of the Personnel Training System for Oil and Gas Projects in the Russian Arctic

Resources ◽  
2020 ◽  
Vol 9 (11) ◽  
pp. 137
Author(s):  
Ekaterina Samylovskaya ◽  
Regina-Elizaveta Kudryavtseva ◽  
Dmitriy Medvedev ◽  
Sergey Grinyaev ◽  
Alfred Nordmann
Keyword(s):  
Oil And Gas ◽  
Interdisciplinary Approach ◽  
Training System ◽  
Basic Knowledge ◽  
The Arctic ◽  
Survey Method ◽  
Russian Arctic ◽  
Personnel Training ◽  
Global Trends ◽  
The Future

This paper analyses the process of transforming specialist training systems for oil and gas projects in the Arctic, which has been taking place within the structure of education in Russia over the past decade. Using classical methods of analysis, synthesis, and classification, the authors studied the main global trends in training personnel for the Arctic and the manifestations of these trends in the system of training Russian specialists. To identify the qualitative characteristics of the educational system development, the authors applied the survey method and composed a list of leading universities in training personnel for the Russian Arctic, as well as the “Arctic professions of the future”. As a result of the study, the authors came to the conclusion that global trends in training “Arctic personnel” show the need to develop an interdisciplinary approach, to form basic knowledge in Natural Sciences, to study the socio-cultural specifics of the region, to develop new educational standards, to implement the concept of ‘Life Long Learning’, to widely introduce digital technologies and to internationalize education. In general, the Russian personnel training system is adapting to changing conditions, in particular, some progress has been made in the formation of “digital” competencies and skills to work in a developed IT infrastructure. The introduction of “digital fields” has led to an increase in the demand for IT specialists in the Arctic oil and gas sector. With the help of an expert survey, it was revealed that in the future, the most popular professions, along with “drillers” and transport specialists, will be IT specialists who ensure the “digital fields” functioning. The leading Russian universities that train specialists for modern oil and gas projects in the Arctic have been identified. It is noted that not all leading industry universities in Russia are participating in international educational projects and organizations. There is skepticism about the internationalization of education.

DIDACTIC MODEL OF LIFT

2018 ◽  
pp. 219-224
Author(s):  
Lubica Miková
Keyword(s):  
Printed Circuit Board ◽  
Base Plate ◽  
Educational Process ◽  
Circuit Board ◽  
Basic Knowledge ◽  
Practical Training ◽  
Target Setting ◽  
Lower Base ◽  
Complex Design ◽  
Starting Point

Urgency of the research. Mechatronics products become more sophisticated and complicated. Mechatronic engineers should be prepared for this complex design process. Practical experimental model helps improve educational process as preparing for practice. Target setting. Miniaturized model of the lift suitable for practical training on subjects focused to microcontrollers, sen-sors, actuators etc. Students have possibility to make practice on laboratory exercises, where they can verify theoretical knowledge obtained on lectures. The arrangement of the model has modular character, because of possibility to rearrange or adding of new function into model. The aim was to create minimized model of real lift with all functions and systems. Actual scientific researches and issues analysis. Many universities are oriented only to finished robotic kits and do not support creativity of students. Open access and open structure model missing in this field. There is a need for fast prototyping model, which allows the creation of new design of product. Uninvestigated parts of general matters defining. The question of the design of printed circuit board are uninvestigated, because they need more time than allows normal exercises. The research objective. The main aim of educational process is to educate engineers with basic knowledge, skills and handicraft. Practical models help as support devices for fulfil of this aim. All mechatronic students can practice a training on these practical models. They become as more skilled and well-oriented engineers.. The statement of basic materials. Construction consist of upper and lower base plate connected with four pillars used as linear guide for moving of lift cage. Lower base plate includes base microcontrollers boards, resistor network, power transis-tor array board, power supply terminals, relay modules, PWM module and signals terminals. Upper base plate consist of DC motor with gearing and screw mechanism for moving the lift cage. Conclusions. The model enables supports the creativity of the students. The starting point of the using of the model can be without any wired connections. Students should connect every part and try functionality of every function. The students receive the defined several problems and they have to analyze it and make any proposal for solution of defined problems.

PRACTICAL TRAINING ON “PATHOMORPHOLOGY” AS A WAY TO FORM FUTURE DOCTOR’S PROFESSIONAL COMPETENCE

2020 ◽  
pp. 96-101
Author(s):  
E. О. Kindrativ ◽  
N. Ya. Chuiko ◽  
Z. Ya. Huryk ◽  
V. М. Kostiuk ◽  
О. М. Rudiak ◽  
...  
Keyword(s):  
Electron Diffraction ◽  
Professional Competence ◽  
Clinical Symptoms ◽  
Training System ◽  
Educational Process ◽  
Practical Training ◽  
Pathological Anatomy ◽  
Medical Discipline ◽  
Training Topic ◽  
Diffraction Patterns

Abstract. The article presents a practical training’s analysis on the discipline “Pathomorphology” at the Department of Pathological Anatomy as a tool of forming the future doctor’s professional competence. The main purpose of practical training on “Pathomorphology” is the formation of skills and abilities of pathological processes and diseases morphological diagnostics by studying morphological pictures with the analysis of pathogenetic mechanisms and clinical symptoms of diseases. Practical training on “Pathomorphology” covers the analysis of incomprehensible and complex issues of the topic during the lecturer and students’ interview, recognition of pathological processes and diseases main manifestations, students’ independent in-class work with macro -, micro -preparations and electron diffraction patterns, solving typical situational clinical tasks with the analysis of mistakes made. The students have the opportunity to observe online autopsies in dissecting room. We created and constantly update archive videos, thematic autopsies. A multimedia presentation has been developed for each practical training topic of the discipline, which contains a practical training scenario according to the guidance papers for teachers. This presentation contains illustrated questions in the form of flowcharts, macro- and micro-preparations, which are proposed to recognise a pathological process or disease. The modern education main provision is to provide students with knowledge, skills and abilities that they should master, mainly in independent in-class work, managed and guided by a lecturer. For this stage of practical training developed an album with consideration to the peculiarities of teaching the discipline at various faculties. In the album, students draw micro-preparations, according to the chart, describe macro-preparations, micro-preparations and electron diffraction patterns. This comprehensive approach to the study of “Pathomorphology” allows to discuss divisive interpretations of complex mechanisms of pathological processes development, demonstrate modern research methods in pathological anatomy, as well as better prepare the student for the final controls, the unified state qualification exam and the exam on International fundamentals of medicine. The students’ educational process in the study of the basic medical discipline “Pathomorphology” is focused on the introduction of new techniques and innovative teaching technologies. In pathological anatomy, a significant place in the assessment of the phenomena studied is given to visual macro-, microscopic, and electron-microscopic analysis of pathology. At the same time, particular importance is attributed to the visibility of the educational process, including with the use of modern multimedia technologies, which is embodied by the faculty of the Department. Active forms of training used in a practical training on “Pathomorphology” allow students to form basic doctor’s professional competencies. The practical training system used on the Department of Pathological Anatomy makes it possible to, first of all, motivate the student to study such a complex discipline as “Pathomorphology”, to ensure the theoretical knowledge acquisition, development and harness skills in the pathological processes and diseases morphological diagnosis as well as to form personality, which is well-versed in the professional field and has competencies for further growth in professional and personal terms.

Features and prospects of distance learning at the department of therapeutic dentistry

2021 ◽  
Vol 41 (1) ◽  
pp. 14-16
Author(s):  
T. О. Petrushanko ◽  
◽  
T. D. Bubliy ◽  
L. I. Dubovaya ◽  
◽  
...  
Keyword(s):  
Distance Learning ◽  
Educational Material ◽  
Educational Technologies ◽  
Practical Skills ◽  
Multimedia Presentations ◽  
Face To Face ◽  
Teaching Aids ◽  
Contact Information ◽  
High Level ◽  
Thematic Plan

The training of future doctors should be continuous and organized at a high level, because medicine is one of the priority spheres of society. With the introduction of quarantine in the context of a pandemic, the question of changing the format of classes has become especially acute, which is associated with the need to exclude massive concentrations of medical students. In our academy, in the first days of quarantine, communication was organized by groups in the Viber and Telegram messengers. In the following days, training was carried out on the use of the Zоm service platform for video conferencing, online meetings and distance learning, and trainings were organized. The department’s website contained the contact information of all teachers, the schedule of classes, the thematic plan of lectures and practical classes, a list of basic and additional literature for students of each course. In the materials for downloading, students had the opportunity to familiarize themselves with multimedia presentations of lectures, teaching aids developed by the staff of the department, methodological recommendations on all topics of practical exercises according to the thematic plan. It should be noted that new educational technologies contribute to the improvement of information competence, allow students to independently master the educational material, but training a doctor in practical skills requires the student’s traditional face-to-face contact with teachers and patients.

Primary accounting documentation

2021 ◽  
Author(s):  
Yuriy Sigidov ◽  
Elena Kalashnikova ◽  
Tat'yana Horol'skaya
Keyword(s):  
Training System ◽  
Economic Life ◽  
Federal State ◽  
Educational Standards ◽  
Tax Legislation ◽  
Economic Entity ◽  
Document Flow ◽  
The Moment ◽  
State Educational ◽  
Theoretical Foundations

The textbook sets out the theoretical foundations of the document flow of an economic entity, considers the stages of the movement of accounting documents from the moment of their creation to their transfer to storage, presents the procedure for registration of primary accounting documents on the facts of economic life in various parts of the accounting process in accordance with the requirements of Russian accounting and tax legislation. Meets the requirements of the federal state educational standards of higher education of the latest generation. It is intended for students in the field of training 38.03.01 "Economics", practicing accountants, economists, students of the advanced training system.

Technological equipment

2021 ◽  
Author(s):  
Sergey Berberov ◽  
Mihail Tamarkin ◽  
Galina Prokopec ◽  
Valeriy Lebedev
Keyword(s):  
Vocational Education ◽  
Machine Tools ◽  
General Information ◽  
Federal State ◽  
Practical Training ◽  
Mechanical Processing ◽  
Educational Standards ◽  
Secondary Vocational Education ◽  
Measuring Devices ◽  
State Educational

General information about devices, their classification and structure is presented; theoretical bases of basing, taking into account the specifics of the choice of basing schemes when choosing technological bases; designs of the main elements of machine tools, methods of their precision and power calculations of devices; design features of devices for various technological systems of mechanical processing, including CNC; features of control and measuring devices; individual issues of mechanization, automation, unification and standardization of devices; methods of designing special devices. Special attention is paid to the educational and methodological support of practical training of specialists. Meets the requirements of the federal state educational standards of secondary vocational education of the latest generation. It is intended for students of secondary vocational education institutions studying in the specialty 15.02.08 "Technology of mechanical engineering".

scholarly journals Remote practical training to gain professional skills and professional experience (nursing) at the medical faculty

2021 ◽  
Vol 21 (4) ◽  
pp. 460-466
Author(s):  
Aleksandr A. Tainkin ◽  
Keyword(s):  
Nursing Education ◽  
Nursing Practice ◽  
Medical Faculty ◽  
Educational Institutions ◽  
Professional Activity ◽  
Practical Training ◽  
Practical Skills ◽  
Professional Skills ◽  
Pedagogical Analysis ◽  
New Form

Due to the transition of higher educational institutions to remote functioning in the spring of 2020 and the impossibility of conducting nursing practice on the basis of medical establishments it became necessary to create a new form of having classes that would allow students to master practical skills without contacting patients. The article presents the author's methodology of remote practical training in class to obtain professional skills and experience of professional activity (nursing) at the medical faculty. The author offers simple methods of making moulages for students to master practical skills and describes the methodology of organizing and conducting distance classes using these moulages. The pedagogical analysis of one of the classes is carried out. It is shown that the new form of conducting classes allows to individualize the work with students and help each student achieve perfection in mastering the methods of nursing manipulations. The method of giving remote classes described by the author can be used by teachers at practical training in the future, in classes on “nursing” at the medical faculty, in institutes of higher nursing education, and after the removal of epidemiological restrictions imposed due to the spread of a new coronavirus infection, for remote counseling of students undergoing nursing practice in medical establishments outside the Saratov region.

scholarly journals Digital Platform for Creating Personalized Adaptive Online Courses

2020 ◽  
Vol 24 (2) ◽  
pp. 65-72
Author(s):  
N. V. Komleva ◽  
D. A. Vilyavin
Keyword(s):  
Online Education ◽  
System Analysis ◽  
Online Courses ◽  
Educational Material ◽  
Professional Standards ◽  
Federal State ◽  
Educational Content ◽  
Digital Platform ◽  
Individual Level ◽  
The Creation

The purpose of the research is to develop a digital platform for creating personalized adaptive online courses that can integrate into the university’s e-learning environment. The Digital Tutor platform is designed to provide the online learning process with tools that allow for the adaptation of the content of the electronic course in accordance with the individual level of student competency through adaptive testing tools in order to achieve the level of student competency established by educational and professional standards.Materials and research methods. The research methodological base consists of methods and technologies of system analysis and knowledge management. Conclusions and provisions of the work are based on the analysis of domestic and foreign literature on the use of digital technologies in education. In preparing the article, materials obtained by the authors during the scientific and practical development of the prototype of the Digital Tutor platform were used to create personalized adaptive online courses at Plekhanov Russian University of Economics.Results. The digital platform for hosting the repository of educational objects and the online courses themselves is available on the University’s information resources with the possibility of integration into the University’s electronic educational environment. The implementation of this project will allow: students and the audience to use educational content prepared on the basis of relevant educational material, as well as to participate in its creation and discussion; to develop more dynamic and high-quality training courses that contribute to the formation of the required competencies among students and the audience; significantly reduce the burden on lecturers when working with remote students, free up more time for updating the training material, the formation of practical and design tasks; implement the concept of personalization of training - the creation of educational material aimed at a particular student; provide support for the creation and updating of their own MOOC; transform the system of continuing education to the requirements and needs of the business; respond ahead of time to the needs of society for qualified personnel for the digital economy.Conclusion. A new model for the implementation of online education has been proposed and tested, which consists in the automatic construction of online courses from the educational objects of the repository in accordance with the monitoring of its activities and a personal trajectory to achieve the required learning outcomes. The concept of transformation of the model of online education is based on the creation of a modern educational based on advanced digital, intelligent technologies. Compared with existing analogues, the project has competitive advantages in the implementation of a new business model of education, based on the availability of a mechanism for automatic updating of educational content and preparing courses on the basis of a repository of educational objects that form the necessary competencies in accordance with the Federal State Educational Standard and approved professional standards.

scholarly journals Control of students' autonomous learning in competency-based teaching of mathematics

2019 ◽  
pp. 24-31
Author(s):  
S. N. Gorlova ◽  
E. A. Makarova
Keyword(s):  
Training System ◽  
Autonomous Learning ◽  
Federal State ◽  
Subject Knowledge ◽  
Competency Based ◽  
The Subject ◽  
Teaching Of Mathematics ◽  
Teaching Function ◽  
State Educational ◽  
Teaching Learning

Federal State Educational Standards of Higher Education have designated a reorientation from the subject-knowledge education model to the competency-based one, when the goal is to develop students' personal and professional features with an emphasis on their autonomous learning. Universality and generality of requirements for the results of studying the bachelor’s programme in Pedagogical Education does not exclude, but assumes the subject’s orientation of the competencies formulated when implementing specific areas of training. This requires rethinking the functionality of all components of the training system, including the contents. It is the very aspect that remains insufficiently revealed for competency-based teaching of mathematics. The vector of a significant part of studies is directed towards the search for effective educational technologies. Meanwhile, continuity in nurturing competencies requires considering professional orientation on teaching-learning the subject. Reviewing mathematical contents is also vital as the proportion of students’ autonomous learning is getting increased. The article substantiates the role and significance of mathematical contents in arranging control of students' autonomous learning. Keeping in mind the priority of control’s teaching function, it is proposed to make up tasks that contribute to assessing not only knowledge, but also experiential and motivational components of competences.

Sign in / Sign up

Export Citation Format

Share Document