scholarly journals Applicability of Scaling Approach for Analysis of Pyrolysis and Gasification of Porous Structures Composed of Solid Fuel Particles

2012 ◽  
Vol 2012 ◽  
pp. 1-10
Author(s):  
Aliaksandr Alevanau ◽  
Pawel Donaj ◽  
Weihong Yang ◽  
Wlodzimierz Blasiak
Keyword(s):  
Experimental Research ◽  
Solid Fuel ◽  
The Self ◽  
Porous Structures ◽  
The Best Approximation ◽  
Self Organized ◽  
Volumetric Models ◽  
Fuel Particles ◽  
Kinetics Of ◽  
Reactive Properties

Experimental research on the pyrolysis and gasification of randomly packed straw pellets was conducted with an emphasis on the reactive properties of the shrinking porous structure of the pellets. The apparent kinetics of such pyrolysis was approximated by the random pore, grain, and volumetric models. The best approximation results were obtained with the grain and random pore models. The self-organized oscillations of the pellet conversion rate during pyrolysis were observed. Two complementary explanations of the phenomenon are proposed.

Analysis of process of emulsions transport in hydrophilic/oleophilic granular porous media driven by capillary force

2018 ◽  
Vol 2 (21) ◽  
pp. 85-101
Author(s):  
Olga Shtyka ◽  
Łukasz Przybysz ◽  
Mariola Błaszczyk ◽  
Jerzy P. Sęk
Keyword(s):  
Porous Media ◽  
Experimental Research ◽  
Granular Media ◽  
Single Phase ◽  
Influential Factor ◽  
Dispersed Phase ◽  
Porous Structures ◽  
Phase Concentration ◽  
Granular Porous Media ◽  
Kinetics Of

The research focuses on the issues concerning a process of multiphase liquids transport in granular porous media driven by the capillary pressure. The current publication is meant to introduce the results of experimental research conducted to evaluate the kinetics of the imbibition and emulsions behavior inside the porous structures. Moreover, the influence of the dispersed phase concentration and granular media structure on the mentioned process was considered. The medium imbibition with emulsifier-stabilized emulsions composed of oil as the dispersed phase in concentrations of 10 vol%, 30 vol%, and 50 vol%, was investigated. The porous media consisted of oleophilic/hydrophilic beads with a fraction of 200–300 and 600–800 μm. The experimental results provided that the emulsions imbibition in such media depended stronger on its structure compare to single-phase liquids. The increase of the dispersed phase concentration caused an insignificant mass decreasing of the imbibed emulsions and height of its penetration in a sorptive medium. The concentrations of the imbibed dispersions exceeded their initial values, but reduced with permeants front raise in the granular structures that can be defined as the influential factor for wicking process kinetics.

Problem behavior in autism spectrum disorders: A paradigmatic self-organized perspective of network structures

2019 ◽  
Vol 42 ◽  
Author(s):  
Lucio Tonello ◽  
Luca Giacobbi ◽  
Alberto Pettenon ◽  
Alessandro Scuotto ◽  
Massimo Cocchi ◽  
...  
Keyword(s):  
Autism Spectrum Disorder ◽  
Problem Behaviors ◽  
Autism Spectrum ◽  
The Self ◽  
Network Structures ◽  
Self Organized ◽  
Critical Equilibrium ◽  
Self Organized Criticality ◽  
Acute Agitation ◽  
Spectrum Disorders

AbstractAutism spectrum disorder (ASD) subjects can present temporary behaviors of acute agitation and aggressiveness, named problem behaviors. They have been shown to be consistent with the self-organized criticality (SOC), a model wherein occasionally occurring “catastrophic events” are necessary in order to maintain a self-organized “critical equilibrium.” The SOC can represent the psychopathology network structures and additionally suggests that they can be considered as self-organized systems.

Irradiation behavior of pyrolytic silicon carbide

1983 ◽  
Vol 41 ◽  
pp. 72-73
Author(s):  
R. J. Lauf
Keyword(s):  
Silicon Carbide ◽  
Fission Products ◽  
Thermodynamics And Kinetics ◽  
Neutron Fluences ◽  
Fuel Particles ◽  
Sic Coatings ◽  
Irradiation Behavior ◽  
Kinetics Of ◽  
Htgr Fuel

Fuel particles for the High-Temperature Gas-Cooled Reactor (HTGR) contain a layer of pyrolytic silicon carbide to act as a miniature pressure vessel and primary fission product barrier. Optimization of the SiC with respect to fuel performance involves four areas of study: (a) characterization of as-deposited SiC coatings; (b) thermodynamics and kinetics of chemical reactions between SiC and fission products; (c) irradiation behavior of SiC in the absence of fission products; and (d) combined effects of irradiation and fission products. This paper reports the behavior of SiC deposited on inert microspheres and irradiated to fast neutron fluences typical of HTGR fuel at end-of-life.

scholarly journals Tripeptide Self-Assembly into Bioactive Hydrogels: Effects of Terminus Modification on Biocatalysis

Molecules ◽  
2020 ◽  
Vol 26 (1) ◽  
pp. 173
Author(s):  
Marina Kurbasic ◽  
Ana M. Garcia ◽  
Simone Viada ◽  
Silvia Marchesan
Keyword(s):  
Self Assembly ◽  
The Self ◽  
Chemical Modifications ◽  
Ability To Work ◽  
Active Compounds ◽  
Future Design ◽  
Self Organized ◽  
The Future ◽  
Bio Material ◽  
Supramolecular Catalysts

Bioactive hydrogels based on the self-assembly of tripeptides have attracted great interest in recent years. In particular, the search is active for sequences that are able to mimic enzymes when they are self-organized in a nanostructured hydrogel, so as to provide a smart catalytic (bio)material whose activity can be switched on/off with assembly/disassembly. Within the diverse enzymes that have been targeted for mimicry, hydrolases find wide application in biomaterials, ranging from their use to convert prodrugs into active compounds to their ability to work in reverse and catalyze a plethora of reactions. We recently reported the minimalistic l-His–d-Phe–d-Phe for its ability to self-organize into thermoreversible and biocatalytic hydrogels for esterase mimicry. In this work, we analyze the effects of terminus modifications that mimic the inclusion of the tripeptide in a longer sequence. Therefore, three analogues, i.e., N-acetylated, C-amidated, or both, were synthesized, purified, characterized by several techniques, and probed for self-assembly, hydrogelation, and esterase-like biocatalysis. This work provides useful insights into how chemical modifications at the termini affect self-assembly into biocatalytic hydrogels, and these data may become useful for the future design of supramolecular catalysts for enhanced performance.

scholarly journals Homogeneous ignition and volatile combustion of single solid fuel particles in air and oxy-fuel conditions

Fuel ◽  
2021 ◽  
Vol 291 ◽  
pp. 120101
Author(s):  
Tao Li ◽  
Pooria Farmand ◽  
Christopher Geschwindner ◽  
Max Greifenstein ◽  
Jan Köser ◽  
...  
Keyword(s):  
Solid Fuel ◽  
Fuel Particles

scholarly journals Investigation of single-domain Au silicide nanowires on Si(110) formed for Au coverages in the monolayer regime

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Stephan Appelfeller
Keyword(s):  
Fermi Level ◽  
Surface Structure ◽  
Density Of States ◽  
The Self ◽  
Single Domain ◽  
Photoemission Spectroscopy ◽  
Annealing Temperatures ◽  
Self Organized ◽  
Scanning Tunnelling ◽  
Tunnelling Microscopy

AbstractThe self-organized formation of single domain Au silicide nanowires is observed on Si(110). These nanowires are analysed using scanning tunnelling microscopy (STM) and spectroscopy (STS) as well as photoemission spectroscopy (PES). Core-level PES is utilised to confirm the formation of Au silicide and establish its presence as the top most surface structure, i.e., the nanowires. The growth of the Au silicide nanowires and their dimensions are studied by STM. They form for Au coverages of about 1 monolayer and are characterized by widths of about 2 to 3 nm and heights below 1 nm while reaching lengths exceeding 500 nm when choosing appropriate annealing temperatures. Valence band PES and STS indicate a small but finite density of states at the Fermi level typical for compound metals.

scholarly journals Ion Beam Nanopatterning of Biomaterial Surfaces

2021 ◽  
Vol 11 (14) ◽  
pp. 6575
Author(s):  
Yu Yang ◽  
Adrian Keller
Keyword(s):  
Material Properties ◽  
Ion Beam ◽  
The Self ◽  
Solid Surfaces ◽  
Beam Irradiation ◽  
Ion Beam Irradiation ◽  
Future Directions ◽  
Self Organized ◽  
Functional Surfaces ◽  
Biomaterial Surfaces

Ion beam irradiation of solid surfaces may result in the self-organized formation of well-defined topographic nanopatterns. Depending on the irradiation conditions and the material properties, isotropic or anisotropic patterns of differently shaped features may be obtained. Most intriguingly, the periodicities of these patterns can be adjusted in the range between less than twenty and several hundred nanometers, which covers the dimensions of many cellular and extracellular features. However, even though ion beam nanopatterning has been studied for several decades and is nowadays widely employed in the fabrication of functional surfaces, it has found its way into the biomaterials field only recently. This review provides a brief overview of the basics of ion beam nanopatterning, emphasizes aspects of particular relevance for biomaterials applications, and summarizes a number of recent studies that investigated the effects of such nanopatterned surfaces on the adsorption of biomolecules and the response of adhering cells. Finally, promising future directions and potential translational challenges are identified.

Self-Assembly of Single Chain Janus Nanoparticles from Azobenzene-Containing Block Copolymers and Reversible Photoinduced Morphology Transition

2021 ◽  
Author(s):  
Wei Wen ◽  
Aihua Chen
Keyword(s):  
Block Copolymers ◽  
Experimental Research ◽  
Self Assembly ◽  
The Self ◽  
Single Chain ◽  
Morphology Transition ◽  
Janus Nanoparticles ◽  
Assembly Behavior

Self-assembly of amphiphilic single chain Janus nanoparticles (SCJNPs) is a novel and promising approach to fabricate assemblies with diversified morphologies. However, the experimental research of the self-assembly behavior of SCJNPs...

scholarly journals Determining the mass-related reaction effectiveness factor of large, nonspherical fuel particles for bridging between intrinsic and apparent combustion kinetics

2019 ◽  
Vol 141 (2) ◽  
pp. 797-806 ◽  
Author(s):  
Tibor Szűcs ◽  
Pal Szentannai
Keyword(s):  
Combustion Process ◽  
Effectiveness Factor ◽  
Cfd Modeling ◽  
Combustion Kinetics ◽  
Kinetic Measurements ◽  
Environmental Requirements ◽  
Fuel Particles ◽  
Related Reaction ◽  
Kinetics Of ◽  
Internal Pore

AbstractThe utilization of challenging solid fuels in the energy industry is urged by environmental requirements. The combustion kinetics of these fuel particles differs markedly from that of pulverized coal, mainly because of their larger sizes, irregular (nonspherical) shapes, and versatile internal pore structures. Although the intrinsic reaction kinetic measurements on very small amounts of finely ground samples of these particles are mostly available, a bridge toward their apparent reaction modeling is not evident. In this study, a method is introduced to build this bridge, the goodness of which was proved on the example of an industrially relevant biofuel. To do this, the results of a macroscopic combustion measurement with real samples in a well-modelable environment have to be used, and for considering some not negligible effects, 3D CFD modeling of the experimental environment is also to be applied. The outcome is the mass-related reaction effectiveness factor as a function of the rate of conversion. This variable can be considered as the active fraction of the entire particle mass on its periphery, and it can be used as the crucial element in modeling the combustion process of the same particle under other circumstances by including the actual boundary conditions. Another advantage of this method is its covering inherently the entire combustion process (water and volatile release, and char combustion) and also its applicability for reactors utilizing bigger particles like fluidized bed combustors.

Sign in / Sign up

Export Citation Format

Share Document