Paleomagnetism of the Franz Josef Land Archipelago: Application to the Mesozoic Tectonics of the Barents Sea Continental Margin

—We report new paleomagnetic and geochronological data for rocks of the Franz Josef Land archipelago and generalize available information about the paleomagnetism of the Barents Sea continental margin as applied to the issues of the Mesozoic Arctic tectonics. Specifically, the obtained age estimates are indicative of a brief episode of mantle plume magmatism at the Barremian–Aptian boundary (Early Cretaceous). The paleomagnetic data shows that intraplate magmatism formations in the High Arctic, including the Franz Josef Land traps, are nothing else than a trace of the Iceland plume on the migrating tectonic plates of the region. Thus, the Iceland plume was geographically stationary for at least the last 125 Myr. Our paleotectonic reconstructions suggest a direct connection of the intraplate strike-slip systems of the Eurasian continent with the configuration and subsequent evolution mode of Mesozoic marginal basins and spreading axes during the initial opening stage of the Arctic Ocean.

Effect of Smashing Ridge Tillage Depth on Soil Water, Salinity, and Yield in Saline Cotton Fields in South Xinjiang, China

To explore the potential of smashing ridge tillage irrigation, it is necessary to investigate how smashing ridge tillage technology with mulched drip irrigation affects soil water, salinity, and cotton yield in saline fields. We conducted a two-year (2020–2021) field experiment to study the effects of different smashing ridge tillage depths on soil bulk density, moisture, salinity, dry matter production, yield, and its constituents (effective bolls, 100-bell weight). There were three smashing ridge tillage depths: A (20 cm), B (40 cm), and C (60 cm), with traditional tillage as the CT. The results showed that all of the smashing ridge tillage could reduce soil bulk density, improve the utilization and uptake of deep soil water during the rapid growth period, and reduce the soil salt content. Compared with the CT treatment, the average soil bulk density of the 0–60 cm soil layer in treatments A, B, and C in 2020 and 2021 decreased by 3.05%, 5.87%, 10.09%, and 1.65%, 4.48%, and 8.49%, respectively. The average soil water content in the 0–120 cm soil layer at the flowering and boll stage decreased by 3.68%, 6.28%, 9.04%, and 3.59%, 6.52%, and 9.98%, respectively; the soil salt content in the 0–120 cm soil layer at the boll opening stage decreased by 4.21%, 6.75%, 11.95%, and 5.47%, 24.25%, and 54.13%, respectively. Cotton dry matter production and yield tended to increase with an increasing depth of smash ridge tillage. Treatment C obtained the maximum dry matter production, seed cotton yield, effective bolls, and 100-boll weight. The dry matter production at the boll opening stage was significantly increased by 17.16% and 15.91%, and the yield was significantly increased by 65.24% and 84.14% in treatments C in 2020 and 2021, respectively, compared to CT. The smashing ridge tillage of 60 cm can optimize the structure of the soil tillage layer and also reduce soil salinity and increase yield, which is the suitable depth of smashing ridge tillage for saline cotton fields in the south of Xinjiang. The findings of the study can provide some theoretical basis and practical experience for the improvement of saline soils and sustainable agricultural development in South Xinjiang, China.

Identification of Co-Expressed Genes Related to Theacrine Synthesis in Tea Flowers at Different Developmental Stages

Jiaocheng kucha is the first reported tea germplasm resource which contains theacrine founded in Fujian Province. Currently, the anabolic mechanism of theacrine within tea leaves is clear, but there are few studies focused on its flowers. In order to further explore the mechanism of theacrine synthesis and related genes in flowers, current study applied Jiaocheng kucha flowers (JC) as test materials and Fuding Dabaicha flowers (FD) as control materials to make transcriptome sequencing, and determination of purine alkaloid content in three different developmental periods (flower bud stage, whitening stage and full opening stage). The results showed that the flower in all stages of JC contained theacrine. The theacrine in the flower bud stage was significantly higher than in the other stages. The differentially expressed genes (DEGs) at three different developmental stages were screened from the transcriptome data, and were in a total of 5642, 8640 and 8465. These DEGs related to the synthesis of theacrine were primarily annotated to the pathways of purine alkaloids. Among them, the number of DEGs in xanthine synthesis pathway was the largest and upregulated in JC, while it was the smallest in caffeine synthesis pathway and downregulated in JC. Further weighted gene co-expression network (WGCNA) indicated that ADSL (CsTGY03G0002327), ADSL (CsTGY09G0001824) and UAZ (CsTGY06G0002694) may be a hub gene for the regulation of theacrine metabolism in JC. Our results will contribute to the identification of candidate genes related to the synthesis of theacrine in tea flowers, and explore the molecular mechanism of theacrine synthesis in JC at different developmental stages.

Integrating Sentinel-1/2 Data and Machine Learning to Map Cotton Fields in Northern Xinjiang, China

Timely and accurate information of cotton planting areas is essential for monitoring and managing cotton fields. However, there is no large-scale and high-resolution method suitable for mapping cotton fields, and the problems associated with low resolution and poor timeliness need to be solved. Here, we proposed a new framework for mapping cotton fields based on Sentinel-1/2 data for different phenological periods, random forest classifiers, and the multi-scale image segmentation method. A cotton field map for 2019 at a spatial resolution of 10 m was generated for northern Xinjiang, a dominant cotton planting region in China. The overall accuracy and kappa coefficient of the map were 0.932 and 0.813, respectively. The results showed that the boll opening stage was the best phenological phase for mapping cotton fields and the cotton fields was identified most accurately at the early boll opening stage, about 40 days before harvest. Additionally, Sentinel-1 and the red edge bands in Sentinel-2 are important for cotton field mapping, and there is great potential for the fusion of optical images and microwave images in crop mapping. This study provides an effective approach for high-resolution and high-accuracy cotton field mapping, which is vital for sustainable monitoring and management of cotton planting.

Numerical visualization of drop and opening process for parachute-payload system adopting fluid–solid coupling simulation

In order to study the fluid–solid coupling dynamic characteristics of parachute-payload system during drop process and analyze the unsteady aerodynamic characteristics under finite mass opening conditions, an adaptive moving fluid mesh method is developed on the basis of the existing arbitrary Lagrangian–Eulerian (ALE) fluid–solid coupling method. The calculation results of open force and drop velocity on the C-9 parachute demonstrate the effectiveness of this method. On this basis, the effect of canopies with three different permeability on parachute-payload system motion characteristic including opening property, steady descent property and stability is studied. Comparative analysis is conducted for structures and characteristics of vortex with different canopy materials, and interference mechanism of unsteady flow for parachute-payload system in unsteady oscillation is revealed. The results show that the adaptive moving fluid mesh method can effectively eliminate restrictions of existing simulation methods for parachute-payload system and significantly reduce calculation time. For the lightweight parachute, permeability has significant effect on kinetic characteristic of parachute-payload system. Canopy with large permeability has small opening load and structural stress in opening stage. After opening, there are mainly small vortexes distributed evenly behind the canopy with good stability. However, canopy with small permeability has obvious breath behavior and oscillation in opening stage. The main vortexes periodically shed off after opening. With the change of permeability from small to large, Parachute-payload system eventually presents three steady descent modes: conical descent, gliding descent and stable vertical descent. Graphical abstract

Konseling Individual dalam Mengatasi Perilaku Agresif Siswa

This study aims to determine the implementation of individual counseling to overcome the aggressive behavior of SMA 1 Idi Rayeuk students and to determine the supporting and inhibiting factors for the implementation of individual counseling in overcoming aggressive behavior of SMA 1 Idi Rayeuk students. The aggressive behavior that the author means in this study is the behavior of students who display hostility, feelings of anger, acts of hurting both physically and non-physically, this is where guidance and counseling services need to be applied. This research is a case study research (case study), the approach used in this research is qualitative. Sources of research data, namely counseling guidance teachers at SMA 1 Negeri Idi Rayeuk 2 people, and 7 students, data collection techniques by means of observation interviews and documentation. The results of this study indicate that the implementation of individual counseling on aggressive students using individual counseling, individual counseling overcoming serious student problems. Meanwhile, for mild student problems, it is enough only to be reprimanded and advised by the homeroom teacher and counseling teacher. The stages of individual counseling for students who engage in aggressive behavior are carried out in three stages, the opening stage, the core activity stage and the closing stage, the results obtained for the implementation of individual counseling on students at SMA Negeri 1 Idi Rayeuk are fruitful, students begin to be able to face all problems patiently and a cool head. Students have the ability to make choices or actions for their survival. Students have also started to gradually change their behavior, students have also started to open themselves up to communicate with their closest people such as their parents, siblings, and friends.

Age of Initial Submarine Volcanism in the Paleo-Tsushima Basin and Implications for Submarine Volcanism in the Opening Stage of the Japan Sea in Northern Kyushu

The Tsushima Lapilli Tuff, the thickest tuff in the Taishu Group on Tsushima Island, underwent a thermal event after deposition, and has not previously yielded a reliable age because various ages have been reported. This study clarifies the eruption age and thermal history of the Tsushima Lapilli Tuff based on fission-track (FT) and U–Pb dating of zircon grains using laser ablation inductively coupled plasma mass spectrometry (ICP-LA-MS) and evaluates submarine volcanism during deposition of the Taishu Group in the southwestern Japan Sea, as well as volcanism change on Tsushima Island. This study revealed that thermal events caused rejuvenation in some single-grain FT ages after deposition in the Tsushima Group, and that the eruption age of the Tsushima Lapilli Tuff was 16.2 ± 0.7 Ma; the age of the largest submarine volcanism event in the Taishu Group in Tsushima Island was thus determined. On the basis of our previous studies, this age and tectonism strongly indicate that felsic submarine volcanism occurred between 18 and 16 Ma, accompanied by rapid subsidence, and the volcanism changed from felsic volcanism originating from melting of old continental crust by asthenospheric upwelling to mafic volcanism originating from small-scale lithospheric mantle upwelling from 13.6 Ma onward.

Penetration Damaging Behavior of ATI425 Titanium Alloy

The penetration damaging behavior of ATI425 titanium alloy was studied by 7.62 mm diameter armor piercing projectiles. The damage characteristics and the mechanism were analyzed by observing and analyzing the craters of ATI425 titanium alloy target. It can be found that local temperature-rise of the target plate occurred, even sputtering phenomenon in the opening stage. The shear bands extended upward along the cater wall could be seen in the stable stage. The large non-homogeneous deformation in adiabatic shear bands caused microcracks and micropores. A large number of macro-cracks were observed on the side wall and at the bottom of the crater.

PELATIHAN DAN PENDAMPINGAN PENGGUNAAN KIT IPA DI SD NEGERI 34 CAKRANEGARA

The Ministerial Regulation on Basic and Secondary Education Process Standards ensures that the learning process in primary education should be enjoyable. Fun learning can be obtained through scientific-based learning such as practicum or business. But in reality, learning is conventional, namely lectures and discussions. The utilization of sciences KIT as a learning medium that is owned is never used in classroom learning activities. This is shown from the sciences KIT which is still neatly stored and looks dusty. The reason the sciences KIT was not used was because of the inability of the teacher because they had never received training and the training would damage the sciences KIT used so that the teacher preferred to use conventional learning methods and media. The strategy carried out in this service uses several methods of lectures and presentations, question and answer/discussion, and mentoring. Activities that have been implemented can be said to run smoothly according to the planned schedule. There are no obstacles and problems during the activity and all team members can attend every activity. The whole series of activities starting from the opening stage, delivering training materials, training to closing went smoothly without any meaningful school.