Interspecies dyadic attachment before and after group experience

Short-term group therapy, using social group work, was utilized to treat the psychosocial problems of two groups of elderly low-vision clients and one group of young adult clients with low vision (N = 24). Group members showed psychosocial movement in three phases: shock, reactive depression, and readjustment. Evaluations measured the change in attitudes before and after group therapy. At the end of therapy, 17 persons, compared to none before the therapy, were at the point of self-acceptance and readjustment. Clinical examples illustrate the interplay of intrapsychic and group-experience factors leading to readjustment.

Deformation Replication

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100068394 ◽

1970 ◽

Vol 28 ◽

pp. 280-281

Author(s):

J. Temple Black

Keyword(s):

Cutting Speed ◽

Machining Process ◽

Depth Of Cut ◽

Rake Face ◽

Orthogonal Machining ◽

Aluminum Chips ◽

Before And After ◽

Materials Used ◽

Glass Knife ◽

Very High

Tool materials used in ultramicrotomy are glass, developed by Latta and Hartmann (1) and diamond, introduced by Fernandez-Moran (2). While diamonds produce more good sections per knife edge than glass, they are expensive; require careful mounting and handling; and are time consuming to clean before and after usage, purchase from vendors (3-6 months waiting time), and regrind. Glass offers an easily accessible, inexpensive material ($0.04 per knife) with very high compressive strength (3) that can be employed in microtomy of metals (4) as well as biological materials. When the orthogonal machining process is being studied, glass offers additional advantages. Sections of metal or plastic can be dried down on the rake face, coated with Au-Pd, and examined directly in the SEM with no additional handling (5). Figure 1 shows aluminum chips microtomed with a 75° glass knife at a cutting speed of 1 mm/sec with a depth of cut of 1000 Å lying on the rake face of the knife.

The Clinical, Roentgenological and Morphological Effects of an Acute Exposure of Phosgene on the Lungs of Dogs

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100065237 ◽

1971 ◽

Vol 29 ◽

pp. 236-237

Author(s):

R. F. Bils ◽

W. F. Diller ◽

F. Huth

Keyword(s):

Latent Period ◽

Chemical Industry ◽

Toxic Substance ◽

Lung Edema ◽

X Rays ◽

Beagle Dogs ◽

Male And Female ◽

Morphological Alterations ◽

Before And After ◽

Electron Microscopes

Phosgene still plays an important role as a toxic substance in the chemical industry. Thiess (1968) recently reported observations on numerous cases of phosgene poisoning. A serious difficulty in the clinical handling of phosgene poisoning cases is a relatively long latent period, up to 12 hours, with no obvious signs of severity. At about 12 hours heavy lung edema appears suddenly, however changes can be seen in routine X-rays taken after only a few hours' exposure (Diller et al., 1969). This study was undertaken to correlate these early changes seen by the roengenologist with morphological alterations in the lungs seen in the'light and electron microscopes.Forty-two adult male and female Beagle dogs were selected for these exposure experiments. Treated animals were exposed to 94.5-107-5 ppm phosgene for 10 min. in a 15 m3 chamber. Roentgenograms were made of the thorax of each animal before and after exposure, up to 24 hrs.

Ultrastructure of Melanin Formation in Curvularia sp., Alternaria sp., and Drechslera Sorokiniana

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100079449 ◽

1977 ◽

Vol 35 ◽

pp. 398-399

Author(s):

M. H. Wheeler ◽

W. J. Tolmsoff ◽

A. A. Bell

Keyword(s):

Potassium Phosphate ◽

Thielaviopsis Basicola ◽

Wild Type ◽

Potassium Phosphate Buffer ◽

Transmission Microscopy ◽

Electron Transmission ◽

Melanin Formation ◽

Before And After ◽

Alternaria Sp ◽

Electron Transmission Microscopy

(+)-Scytalone [3,4-dihydro-3,6,8-trihydroxy-l-(2Hj-naphthalenone] and 1,8-di- hydroxynaphthalene (DHN) have been proposed as intermediates of melanin synthesis in the fungi Verticillium dahliae (1, 2, 3, 4) and Thielaviopsis basicola (4, 5). Scytalone is enzymatically dehydrated by V. dahliae to 1,3,8-trihydroxynaphthalene which is then reduced to (-)-vermelone [(-)-3,4- dihydro-3,8-dihydroxy-1(2H)-naphthalenone]. Vermelone is subsequently dehydrated to DHN which is enzymatically polymerized to melanin.Melanin formation in Curvularia sp., Alternaria sp., and Drechslera soro- kiniana was examined by light and electron-transmission microscopy. Wild-type isolates of each fungus were compared with albino mutants before and after treatment with 1 mM scytalone or 0.1 mM DHN in 50 mM potassium phosphate buffer, pH 7.0. Both chemicals were converted to dark pigments in the walls of hyphae and conidia of the albino mutants. The darkened cells were similar in appearance to corresponding cells of the wild types under the light microscope.

Evaluation of Freezing Methods by Low Temperature X-Ray Diffraction

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100079176 ◽

1977 ◽

Vol 35 ◽

pp. 330-333

Author(s):

T. Gulik-Krzywicki ◽

M.J. Costello

Keyword(s):

Biological Materials ◽

Molecular Organization ◽

X Ray Diffraction ◽

Glass Capillary ◽

X Ray ◽

Rate Dependent ◽

Before And After ◽

Freeze Etching ◽

Diffraction Patterns ◽

Set Up

Freeze-etching electron microscopy is currently one of the best methods for studying molecular organization of biological materials. Its application, however, is still limited by our imprecise knowledge about the perturbations of the original organization which may occur during quenching and fracturing of the samples and during the replication of fractured surfaces. Although it is well known that the preservation of the molecular organization of biological materials is critically dependent on the rate of freezing of the samples, little information is presently available concerning the nature and the extent of freezing-rate dependent perturbations of the original organizations. In order to obtain this information, we have developed a method based on the comparison of x-ray diffraction patterns of samples before and after freezing, prior to fracturing and replication.Our experimental set-up is shown in Fig. 1. The sample to be quenched is placed on its holder which is then mounted on a small metal holder (O) fixed on a glass capillary (p), whose position is controlled by a micromanipulator.

The Precipitation of Si in AlCuSi Thin Films

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100070618 ◽

1973 ◽

Vol 31 ◽

pp. 34-35 ◽

Cited By ~ 1

Author(s):

R. M. Anderson

Keyword(s):

Electron Microscopy ◽

Thin Films ◽

Heat Treatment ◽

Solid Solution ◽

Integrated Circuit ◽

Copper Film ◽

Solution Concentration ◽

X Ray ◽

Silicon Thin Films ◽

Before And After

Aluminum-copper-silicon thin films have been considered as an interconnection metallurgy for integrated circuit applications. Various schemes have been proposed to incorporate small percent-ages of silicon into films that typically contain two to five percent copper. We undertook a study of the total effect of silicon on the aluminum copper film as revealed by transmission electron microscopy, scanning electron microscopy, x-ray diffraction and ion microprobe techniques as a function of the various deposition methods.X-ray investigations noted a change in solid solution concentration as a function of Si content before and after heat-treatment. The amount of solid solution in the Al increased with heat-treatment for films with ≥2% silicon and decreased for films <2% silicon.

An Electron Microscope Study of Interdiffusion and Compound Formation in Ta-Au Thin Films

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100070606 ◽

1973 ◽

Vol 31 ◽

pp. 32-33 ◽

Cited By ~ 1

Author(s):

T. C. Tisone ◽

S. Lau

Keyword(s):

Electron Microscope ◽

Electron Microscope Study ◽

Thermally Grown Oxide ◽

Ion Milling ◽

Compound Formation ◽

Technology Application ◽

Transmission Electron ◽

Before And After ◽

Au Thin Films

In a study of the properties of a Ta-Au metallization system for thin film technology application, the interdiffusion between Ta(bcc)-Au, βTa-Au and Ta2M-Au films was studied. Considered here is a discussion of the use of the transmission electron microscope(TEM) in the identification of phases formed and characterization of the film microstructures before and after annealing.The films were deposited by sputtering onto silicon wafers with 5000 Å of thermally grown oxide. The film thicknesses were 2000 Å of Ta and 2000 Å of Au. Samples for TEM observation were prepared by ultrasonically cutting 3mm disks from the wafers. The disks were first chemically etched from the silicon side using a HNO3 :HF(19:5) solution followed by ion milling to perforation of the Au side.

Absolute inner-shell cross section determination for EELS analysis

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s042482010010473x ◽

1988 ◽

Vol 46 ◽

pp. 534-535

Author(s):

P.A. Crozier

Keyword(s):

Cross Section ◽

Cross Sections ◽

Absolute Cross Section ◽

Specimen Thickness ◽

Mass Thickness ◽

Scattering Cross ◽

Before And After ◽

Estimated Error ◽

Scattering Cross Sections ◽

Electron Microscopist

Absolute inelastic scattering cross sections or mean free paths are often used in EELS analysis for determining elemental concentrations and specimen thickness. In most instances, theoretical values must be used because there have been few attempts to determine experimental scattering cross sections from solids under the conditions of interest to electron microscopist. In addition to providing data for spectral quantitation, absolute cross section measurements yields useful information on many of the approximations which are frequently involved in EELS analysis procedures. In this paper, experimental cross sections are presented for some inner-shell edges of Al, Cu, Ag and Au.Uniform thin films of the previously mentioned materials were prepared by vacuum evaporation onto microscope cover slips. The cover slips were weighed before and after evaporation to determine the mass thickness of the films. The estimated error in this method of determining mass thickness was ±7 x 107g/cm2. The films were floated off in water and mounted on Cu grids.

Synchrony of Digestion of SV40 DNA by Exonuclease III Determined by EM

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100116991 ◽

1975 ◽

Vol 33 ◽

pp. 674-675

Author(s):

Ray Wu ◽

G. Ruben ◽

B. Siegel ◽

P. Spielman ◽

E. Jay

Keyword(s):

Dark Field ◽

Uranyl Acetate ◽

Enzyme Digestion ◽

Dna Molecules ◽

Exonuclease Iii ◽

Aluminum Films ◽

Double Stranded Dna ◽

Before And After ◽

Exo Iii ◽

Sv40 Dna

A method for determining long nucleotide sequences of double-stranded DNA is being developed. It involves (a) the synchronous digestion of the DNA from the 3' ends with EL coli exonuclease III (Exo III) followed by (b) resynthesis with labeled nucleotides and DNA polymerase. A crucial factor in the success of this method is the degree to which the enzyme digestion proceeds synchronously under proper conditions of incubation (step a). Dark field EM is used to obtain accurate measurements on the lengths and distribution of the DNA molecules before and after digestion with Exo III, while gel electrophoresis is used in parallel to obtain a mean length for these molecules. It is the measurements on a large enough sample of individual molecules by EM that provides the information on how synchronously the digestion proceeds. For length measurements, the DNA molecules were picked up on 20-30 Å thick carbon-aluminum films, using the aqueous Kleinschmidt technique and stained with 7.5 x 10-5M uranyl acetate in 90% ethanol for 3 minutes.

Parathyroid gland before and after cisplatin treatment

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100128584 ◽

1987 ◽

Vol 45 ◽

pp. 860-861

Author(s):

S.K. Aggarwal ◽

J.M. Fadool

Keyword(s):

Parathyroid Gland ◽

Wistar Rats ◽

Antitumor Agent ◽

The Body ◽

Cross Linking ◽

Limiting Factor ◽

Hormonal Changes ◽

Primary Mechanism ◽

Before And After ◽

Dna Strands

Cisplatin (CDDP) a potent antitumor agent suffers from severe toxic side effects with nephrotoxicity being the major dose-limiting factor, The primary mechanism of its action has been proposed to be through its cross-linking DNA strands. It has also been shown to inactivate various transport enzymes and induce hypocalcemia and hypomagnesemia that may be the underlying cause for some of its toxicities. The present is an effort to study its influence on the parathyroid gland for any hormonal changes that control calcium levels in the body.Male Swiss Wistar rats (Crl: (WI) BR) weighing 200-300 g and of 60 days in age were injected (ip) with cisplatin (7mg/kg in normal saline). The controls received saline injections only. The animals were injected (iv) with calcium (0.5 ml of 10% calcium gluconate/day) and were killed by decapitation on day 1 through 5. Trunk blood was collected in heparinized tubes.