scholarly journals Molecular dynamics simulation of interface atomic diffusion in ultrasonic metal welding

2021 ◽  
Author(s):  
Shimaalsadat Mostafavi ◽  
Franz Bamer ◽  
Bernd Markert
Keyword(s):  
Molecular Dynamics ◽  
Autonomous Vehicles ◽  
Ultrasonic Welding ◽  
Atomic Scale ◽  
Dynamics Simulation ◽  
Atomic Diffusion ◽  
Interface Temperature ◽  
Compression Rate ◽  
Sliding Velocity ◽  
The Impact

AbstractThe formation of a reliable joint between a large number of aluminum strands for battery applications is crucial in automotive industry, especially in the technology of autonomous vehicles. Therefore, in this study, mechanical deformations and diffusion patterns of the mating interface in ultrasonic welding of aluminum were investigated using molecular dynamics simulations. Furthermore, microscopic observations of the joints between aluminum strands from ultrasonic welding illustrating the influence of two process parameters were done. To study the nanomechanics of the joint formation, two aluminum crystallites of different orientations were built. The impact of the sliding velocity and the compression rate of the upper crystal block on the diffusion pattern at the interface of the two crystallites were quantified via the diffusion coefficient. Tensile deformations of several joint configurations were performed to investigate the load-bearing capacity of the solid state bond, taking into account the compression rate, the sliding velocity and the crystallite orientation. The atomic scale simulations revealed that the orientations of the crystallites govern the interface diffusion and the tensile strength of the joint significantly. Furthermore, interface atom diffusion increased with increasing the sliding velocity. Additionally, it was observed that a higher sliding velocity enhances the friction heat generation between the crystallites and significantly increases the interface temperature.

scholarly journals The Impact of the Electric Field on Surface Condensation of Water Vapor: Insight from Molecular Dynamics Simulation

Nanomaterials ◽  
2019 ◽  
Vol 9 (1) ◽  
pp. 64 ◽  
Author(s):  
Qin Wang ◽  
Hui Xie ◽  
Zhiming Hu ◽  
Chao Liu
Keyword(s):  
Molecular Dynamics ◽  
Water Vapor ◽  
Electric Field ◽  
Intermolecular Forces ◽  
Dynamics Simulation ◽  
Water Molecules ◽  
Attraction Force ◽  
Condensation Rate ◽  
Shape Transformation ◽  
The Impact

In this study, molecular dynamics simulations were carried out to study the coupling effect of electric field strength and surface wettability on the condensation process of water vapor. Our results show that an electric field can rotate water molecules upward and restrict condensation. Formed clusters are stretched to become columns above the threshold strength of the field, causing the condensation rate to drop quickly. The enhancement of surface attraction force boosts the rearrangement of water molecules adjacent to the surface and exaggerates the threshold value for shape transformation. In addition, the contact area between clusters and the surface increases with increasing amounts of surface attraction force, which raises the condensation efficiency. Thus, the condensation rate of water vapor on a surface under an electric field is determined by competition between intermolecular forces from the electric field and the surface.

Molecular Dynamics Studies on the Growth and Structural Properties of Hydrogenated DLC Films

2008 ◽  
Vol 373-374 ◽  
pp. 108-112
Author(s):  
Yu Jun Zhang ◽  
Guang Neng Dong ◽  
Jun Hong Mao ◽  
You Bai Xie
Keyword(s):  
Molecular Dynamics ◽  
Structural Properties ◽  
Impact Energy ◽  
Frictional Coefficient ◽  
Carbon Films ◽  
Dynamics Simulation ◽  
Diamond Surface ◽  
Hydrogen Atoms ◽  
Molecular Configuration ◽  
The Impact

The novel frictional properties of hydrogenated DLC (Diamond-like Carbon) films have been reported for nearly ten years. But up to now, researchers still haven’t known the exact mechanism resulting in the super-low frictional performance of hydrogenated DLC films. Especially they have little knowledge on the molecular configuration and structural properties of these kinds of films. In this paper, CH3 radicals with different impact energies are selected as source species to deposit DLC films on diamond (100) by molecular dynamics simulation. Results show hydrogenated DLC films can be successfully obtained when impact energy is in an appropriate scope that is no less than 20eV. The depositing processes involve impinging diamond surface and bonding procedure. Some atoms, instead of bonding with substrate atoms, fly away from the diamond surface. Only suitable impact energy can improve the growth of the film. Within 30eV to 60eV, the maximum deposition ratio is attained. In addition, when carbon atoms act as the deposition sources, the deposition ratio is relatively higher. Furthermore, the authors find that species with higher concentration of carbon atoms in deposition sources lead to a better deposition rate. Carbon atoms are more reactive than hydrogen atoms. Then the relative densities of DLC films are calculated. The density curves indicate that the structures of the films vary obviously as the impact energy augments. The average relative density is generally monotone increase with the increment of impact energy. The hybridization of carbon atoms greatly affects the properties of hydrogenated DLC films. The transition between sp2 and sp3 will result in the graphitization and reduce the frictional coefficient when DLC films are used as tribo-pair in friction.

scholarly journals Comparative Studies on Water Self-Diffusivity Confined in Graphene Nanogap: Molecular Dynamics Simulation

2016 ◽  
Author(s):  
Mohammad Moulod ◽  
Gisuk Hwang
Keyword(s):  
Molecular Dynamics ◽  
Molecular Dynamics Simulation ◽  
Surface Energy ◽  
Water Transport ◽  
Surface Interactions ◽  
Bulk Water ◽  
Water Desalination ◽  
Atomic Scale ◽  
Dynamics Simulation ◽  
Interatomic Potentials

Fundamental understanding of the water in graphene is crucial to optimally design and operate the sustainable energy, water desalination, and bio-medical systems. A numerous atomic-scale studies have been reported, primarily articulating the surface interactions (interatomic potentials) between the water and graphene. However, a systematic comparative study among the various interatomic potentials is rare, especially for the water transport confined in the graphene nanostructure. In this study, the effects of different interatomic potentials and gap sizes on water self-diffusivity are investigated using the molecular dynamics simulation at T = 300 K. The water is confined in the rigid graphene nanogap with the various gap sizes Lz = 0.7 to 4.17 nm, using SPC/E and TIP3P water models. The water self-diffusivity is calculated using the mean squared displacement approach. It is found that the water self-diffusivity in the confined region is lower than that of the bulk water, and it decreases as the gap size decreases and the surface energy increases. Also, the water self-diffusivity nearly linearly decreases with the increasing surface energy to reach the bulk water self-diffusivity at zero surface energy. The obtained results provide a roadmap to fundamentally understand the water transport properties in the graphene geometries and surface interactions.

Multiscale Investigation of Thickness Dependent Melting Thresholds of Nickel Film Under Femtosecond Laser Heating

2018 ◽  
Author(s):  
Pengfei Ji ◽  
Mengzhe He ◽  
Yiming Rong ◽  
Yuwen Zhang ◽  
Yong Tang
Keyword(s):  
Molecular Dynamics ◽  
Femtosecond Laser ◽  
Multiscale Simulation ◽  
Nickel Film ◽  
Atomic Scale ◽  
Dynamics Simulation ◽  
Model Description ◽  
Temperature Model ◽  
Laser Material Processing ◽  
Two Temperature

A multiscale modeling that integrates electronic scale ab initio quantum mechanical calculation, atomic scale molecular dynamics simulation, and continuum scale two-temperature model description of the femtosecond laser processing of nickel film at different thicknesses is carried out in this paper. The electron thermophysical parameters (heat capacity, thermal conductivity, and electron-phonon coupling factor) are calculated from first principles modeling, which are further substituted into molecular dynamics and two-temperature model coupled energy equations of electrons and phonons. The melting thresholds for nickel films of different thicknesses are determined from multiscale simulation. Excellent agreement between results from simulation and experiment is achieved, which demonstrates the validity of modeled multiscale framework and its promising potential to predict more complicate cases of femtosecond laser material processing. When it comes to process nickel film via femtosecond laser, the quantitatively calculated maximum thermal diffusion length provides helpful information on choosing the film thickness.

scholarly journals Material Analysis and Molecular Dynamics Simulation for Cavitation Erosion and Corrosion Suppression in Water Hydraulic Valves

Materials ◽  
2020 ◽  
Vol 13 (2) ◽  
pp. 453 ◽  
Author(s):  
Masoud Kamoleka Mlela ◽  
He Xu ◽  
Feng Sun ◽  
Haihang Wang ◽  
Gabriel Donald Madenge
Keyword(s):  
Molecular Dynamics ◽  
Md Simulation ◽  
Essential Role ◽  
Corrosion Inhibitors ◽  
Cavitation Erosion ◽  
Dynamics Simulation ◽  
Preference Ranking ◽  
Water Hydraulics ◽  
The Impact ◽  
Hydraulic Valves

In the milestone of straggling to make water hydraulics more advantageous, the choice of coating polymer for water hydraulics valves plays an essential role in alleviating the impact of cavitation erosion and corrosion, and this is a critical task for designers. Fulfilling the appropriate selection, we conflicted properties that are vital for erosion and corrosion inhibitors, as well as the tribology in the sense of coefficient of friction. This article aimed to choose the best alternative polymer for coating on the selected substrate, that is, Cr2O3, Al2O3, Ti2O3. By applying PROMETHEE (Preference Ranking Organization Method for Enrichment Evaluations), the best polymer obtained with an analyzed performance attribute is Polytetrafluoroethylene (PTFE) that comes up with higher outranking (0.5932052). A Molecular Dynamics (MD) simulation was conducted to identify the stronger bonding with the regards of the better cleave plane between Polytetrafluoroethylene (PTFE) and the selected substrate. Polytetrafluoroethylene (PTFE)/Al2O3 cleaved in (010) plane was observed to be the strongest bond in terms of binding energy (3188 kJ/mol) suitable for further studies.

scholarly journals Atomic-Scale Mechanism Investigation of Mass Transfer in Laser Fabrication Process of Ti-Al Alloy via Molecular Dynamics Simulation

Metals ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1660
Author(s):  
Ziqi Cui ◽  
Xianglin Zhou ◽  
Qingbo Meng
Keyword(s):  
Molecular Dynamics ◽  
Mass Transfer ◽  
Diffusion Coefficient ◽  
Particle System ◽  
Fabrication Process ◽  
Atomic Scale ◽  
Dynamics Simulation ◽  
Al Alloy ◽  
Laser Fabrication ◽  
Solute Atoms

This article deals with a Ti-Al alloy system. Molecular dynamics simulation was used to simulate and explore the mass transfer behavior during the laser fabrication process at atomic scale. The research goal is to investigate the mass transfer mechanism at atomic scale and the movement of solute atoms during the laser fabrication process. The mean square displacement (MSD), radial distribution function (RDF), atomic number density, and atomic displacement vector were calculated to characterize it. The results show that the TiAl alloy is completely melted when heated up to 2400 K, and increasing the temperature past 2400 K has little effect on mass transfer. As the heating time increases, the diffusion coefficient gradually decreases, the diffusion weakens, and the mass transfer process gradually stabilizes. In Ti-Al binary alloys, the diffusion coefficients of different solute atoms are related to the atomic fraction. During the melting process, the alloy particle system has a greater diffusion coefficient than the elemental particle system.

Molecular Dynamics Simulations of Structures of Amorphous Carbon Films via Deposition

2011 ◽  
Vol 194-196 ◽  
pp. 2220-2224
Author(s):  
Hui Qing Lan ◽  
Zheng Ling Kang
Keyword(s):  
Molecular Dynamics ◽  
Amorphous Carbon ◽  
Growth Dynamics ◽  
Carbon Films ◽  
Film Structure ◽  
Dynamics Simulation ◽  
Carbon Ions ◽  
Amorphous Carbon Films ◽  
Dynamics Simulations ◽  
The Impact

The growth of amorphous carbon films via deposition is investigated using molecular dynamics simulation with a modified Tersoff potential. The impact energy of carbon atoms ranges from 1 to 50 eV and the temperature of the diamond substrate is 300 K. The effects of the incident energy on the growth dynamics and film structure are studied in a detail. Simulation results show that the mobility of surface atoms in the cascade region is enhanced by impacting energetic carbon ions, especially at moderate energy, which favors the growth of denser and smoother films with better adhesion to the substrate. Our results agree qualitatively with the experimental observation.

scholarly journals Investigation of the Effects of Adsorbed Water on Adhesion Energy and Nanostructure of Asphalt and Aggregate Surfaces Based on Molecular Dynamics Simulation

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2339 ◽  
Author(s):  
Wentian Cui ◽  
Wenke Huang ◽  
Bei Hu ◽  
Jiawen Xie ◽  
Zhicheng Xiao ◽  
...  
Keyword(s):  
Molecular Dynamics ◽  
Relative Concentration ◽  
Asphalt Mixture ◽  
Free Water ◽  
Adsorbed Water ◽  
Adhesion Energy ◽  
Atomic Scale ◽  
Dynamics Simulation ◽  
Damage Resistance ◽  
Water Damage

The purpose of this study was to investigate the effect of aggregate surface adsorbed water on the adhesive capacity and nanostructure of asphalt-aggregate interfaces at the atomic scale. Molecular dynamics (MD) simulation was performed to measure and analyze the molecular interactions of asphalt binder with calcite and silica. Radial distribution function (RDF) and relative concentration (RC) were applied to characterizing the concentrations and distributions of asphalt components on aggregate surfaces. In addition, debonding energy and adhesion energy were employed to calculate the variations of interface adhesion energy of the asphalt-aggregate system under different conditions. The obtained results illustrated that the water molecules adsorbed onto the surface of weakly alkaline aggregates inhibited the concentration and distribution of asphalt components near the aggregate surface, decreased adhesion energy between asphalt and aggregates, and changed asphalt nanostructure. Especially, when external free water intruded into the interface of the asphalt-calcite system, the adsorbed water interacted with free water and seriously declined the water damage resistance of the asphalt mixture with limestone as an aggregate and decreased the durability of the mixtures. The water adsorbed onto the surface of the acid aggregate negatively affected the asphalt-silica interface system and slightly reduced the water damage resistance of the asphalt mixture.

Comparison of the effect of poly(N-vinyl caprolactam) and poly(N-isopropyl acrylamide) trimers on the stability of hydrated Na-montmorillonite: A molecular dynamics study

2020 ◽  
pp. 096739112093524
Author(s):  
Jiafang Xu ◽  
Moussa Camara ◽  
Hualin Liao ◽  
Hong Guo ◽  
Kouassi Louis Kra ◽  
...  
Keyword(s):  
Molecular Dynamics ◽  
Conformational Changes ◽  
Stable State ◽  
Dynamics Simulation ◽  
Effect Of Temperature ◽  
Radius Of Gyration ◽  
Molecular Arrangement ◽  
Isopropyl Acrylamide ◽  
The Stability ◽  
The Impact

In the present study, we performed a molecular dynamics simulation of the intercalation of poly( N-isopropyl acrylamide) (NIPAM)3 and poly( N-vinyl caprolactam) (NVCL)3 trimers into Na-montmorillonite (Na-Mt) to evaluate their effects on the interlayer structure and the stability of hydrated Na-Mt. The impact of both trimers on the interlayer species and their dynamics properties at different temperatures in a canonical ensemble (NVT) were investigated. The results showed that the electrostatic forces exerted by Na cations on H2O molecules and the interlayer H2O molecular arrangement are not affected by the rise in temperature after adding both trimers. Trimer addition reinforced the structure of interlayer H2O molecules so that the effect of temperature increase on them became negligible. The structural dynamics evolution of the radius of gyration of both trimers showed the existence of conformation changes when temperature increased. These conformational changes are more complex in the case of (NVCL)3 than (NIPAM)3 due to its large monomers. Both trimers reduced the mobility of interlayer particles with a better inhibition effect obtained for (NVCL)3 compared to (NIPAM)3. The concentration profile of interlayers’ species showed the affinity of Na cations for clay mineral surfaces while H2O molecules moved away. Compared these two trimers, the most stable state of Na-Mt is achieved with (NVCL)3. These results could help highlight the inhibition properties of (NIPAM)3 and (NVCL)3 on hydrated Na-Mt and to predict its stability against changes in environmental conditions.

Sign in / Sign up

Export Citation Format

Share Document